GovChime
Notice ID: f3826916dc06461dace45387cbcd1f7aSpecial NoticeArchived

Notice of Intent for Sole Source Modification - W912HQ22D0006 US Army Individual Terrorism Awareness Course (INTAC)

Archived on July 21, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
8:00 AM EDT
Posted
June 26, 2026
Notice type
Special Notice
NAICS
611519: Other Technical and Trade Schools
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY CORPS OF ENGINEERS.SCO ALEXANDRIA.ENGINEER CENTER SUPPORT ACT HUMPHREYS.W4LD USA HECSA
Place of performance
Summit Point, West Virginia, 25446
Last updated
Oct 29, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W912HQ26S0043
Notice ID
f3826916dc06461dace45387cbcd1f7a

Description

The U.S. Army Corps of Engineers (USACE) Mission Support Battalion (UMSB) awarded the Indefinite Delivery Indefinite Quantity (IDIQ) Single Award Task Order Contract (SATOC) W912HQ22D0006 to Xator Corporation, now known as Summit Point Raceway Associates, Inc., on 18 February 2022 for a total ceiling amount of $8,900,000.00. The ordering period consists of five years beginning on 22 February 2022 through 21 February 2027, with a six-month extension from 22 February 2027 through 21 August 2027. The requirement was for anti-terrorism and security training, which consists of the following: 

The Contractor shall provide all labor, equipment, materials, supervision, contiguous training facilities and other items and services necessary except for items identified as Government furnished property to conduct 6 days of the INTAC training session per class consisting of the following modules: Evasive/Defensive Driving; Surveillance Detection/Route Analysis; and Basic Firearms. Additional modules to be included in each class as needed include the following: 2-day Evasive/Defensive Driving Module; 1-day Tactical Combat Casualty Care Module; 1-day Combined Unimproved Road Driving and Off-Road Driving Module; and 3-day Advanced Firearms Module, 1 day surveillance/detection, half day hostage survival restraint defeat and 1-day practical exercise.

HECSA Contracting now intends to issue a modification to IDIQ W912HQ22D0006 to increase the capacity of the contract by adding additional individual courses as well as new courses expanding on the original content to meet evolving anti-terrorism needs and accommodate personnel from other federal agencies who would benefit from the specialized training. This modification is also expected to increase the contract ceiling by $1,638,144.00. The changes include additional exercise role players and more advanced training for dignitary and executive protection, medical training, firearms handling, restraint escape, and command staff driving. The advanced training is expected to use many of the same resources already in use for training under the contract.

This Notice of Intent is not a request for competitive proposals. Any responses or inquiries to this notice must demonstrate clear and convincing evidence that competition will be advantageous to the Government. All information received from this notice shall be used for planning and market research purposes only. The determination to refrain from competing proposed contracts based on responses to this notice is solely within the discretion of the Government. The Government will not be responsible for costs incurred in the preparation of any information submitted or use of such information. 

Acknowledgement of receipt of responses will not be made, nor will respondents be notified of the evaluation of the information received. Interested parties may express interest and provide a capability statement NLT 6 July 2026 8 AM EST. Responses should be addressed to the Contracting Officer, Douglas Pohlman, at Douglas.E.Pohlman@usace.army.mil and the Contract Specialist, Jordan Baker, at Jordan.D.Baker@usace.army.mil.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

  1. 3
    Version 3Award NoticeArchived

    US Army Individual Terrorism Awareness Course (INTAC)

    Notice 58e4387c60a641939eb1126755510ddb on SAM.gov

  2. 6
    Version 6Special NoticeArchivedCurrent

    Type changed from Award Notice to Special Notice

    Notice of Intent for Sole Source Modification - W912HQ22D0006 US Army Individual Terrorism Awareness Course (INTAC)

    Notice f3826916dc06461dace45387cbcd1f7a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The government requires a contractor to provide instructional support to the Analytical Laboratory Systems (ALS) Operator’s Course which instructs Civil Support Teams (military). The performance requirement that must be met includes instruction of four iterations of the ALS Operator course. The course has an annual throughput of 32 students. The maximum number of students is 8 per course and the instructor to student ratio is one to four (1:4). This instructional support is necessary for Soldiers to maintain a high state of domestic readiness for continental United States (CONUS) Consequence Management (CM). Tasks performed shall be directly related to the ALS educational and training concepts developed at the HDCSO. All work shall be accomplished according to the current Training and Doctrine Command (TRADOC) Regulation 350-70, Systems Approach to Training Management, Processes, and Products (JUL 2017). This is a continuous requirement that is needed immediately to ensure all mission requirements can be continued.
71%
Solicitation12/05/2026
Investigative Interviewing course to provide Federal Aviation Administration (FAA) employees with the tools necessary for conducting ethical, outcome-based interviewing. Learned techniques used in the Plan and Preparation, Engage and Explain, Account – Clarification and Challenge, Closure and Evaluation (P.E.A.C.E.) Model, will assure FAA employees get the right information in the right manner when interviewing for Safety Hotline, Whistleblower, and Suspected Unapproved Parts Investigations; Certificate Management Principal Inspector, Supplier Control, and Quality System Audits; Organization Designation Authorization and Designee Management Inspections; Safety Management System Assessments; and Compliance Action/Enforcement Investigations. Investigative interviewing (and particularly the PEACE model which is the preferred method) aligns with these principles and is considered as the most ethical, transparent and best practice way to obtain reliable and relevant information from persons of interest, complainant, witnesses and respondents. This method has interviewers using an open-ended line of questioning and fewer leading questions to get the answer that are needed and not leading the interviewee in a certain direction. Please review all documents attached in this notice.
65%
Solicitation11/06/2026
Amendment 01 Description provided at bottom of announcement. Amendment 02 Points of Contact updated. INTRODUCTION The Army Contracting Command (ACC) Orlando is issuing this sources sought notice and holding an industry day as a means of conducting market research to identify parties having in the capability and the resources to support the requirement to provide agile, specialized and cost effective Security Assistance Teams (SATs) in order to facilitate security assistance programs that build partnership capacity as well as defense and security relationships; that promote specific U.S. security interests, including all security assistance activities; develop allied and friendly military capabilities for self-defense and multinational operations; and provide U.S. forces with peacetime and contingency access to host nations in support of United States Army Campaign Plan and U.S. national security objectives. The intention is to award a new Multiple Award Task Order Contract (MATOC) Indefinite Delivery Indefinite Quantity (IDIQ) contract. PLACE OF PERFORMANCE Minimal Continental United States (CONUS) performance (Program Management) and Phase-In Period will occur. Predominantly performance will be Outside the Continental United States (OCONUS). *NOTE 01: The OCONUS portion required will have contractor performance under potentially austere, physically demanding, and stressful working conditions. PROGRAM BACKGROUND U.S. Army Security Assistance Training Management (SATMO) is a subordinate command under the U. S. Army Security Assistance Command (USASAC), a Major Subordinate Command (MSC) of Army Material Command (AMC). SATMO executes the overseas portion of the U.S. Army’s Security Assistance Enterprise Outside Continental United States (OCONUS) training and technical assistance mission. SATMO plans, forms, prepares, deploys, sustains and re-deploys Continental United States (CONUS)-based (from the continental U.S.) SATs to execute OCONUS Security Cooperation missions in support of Geographic Combatant Command Theater Security Cooperation Programs and U.S. foreign policy (For the purposes herein, the terms “Security Assistance” and “Security Cooperation” mean “Foreign Military Aid.”). SATMO staff teams with active component Army, active component members of other services, reserve component Army, reserve component members of other services and DoD civilians. SATMO may use contractor services if none of these are available for a given Aviation SAT mission to support rotary wing aircraft. Because of long lead-times for non-contract personnel, and current operations tempo, SATMO anticipates an increasing requirement for contractor support, especially for Aviation skills including flying, maintenance and operational planning. Additional requirements will include the same aviation skills as previously listed but for Non-Standard Aircraft. In this case non-standard aircraft are all types not currently employed by the active component, this includes legacy air frames. In accordance with the Assistant Secretary of the Army for (Acquisition, Logistics, and Technology) (ASA (ALT)) memorandum dated 6 January 2010, all Non-Standard Aircraft training not procured through the United States Army Aviation and Missile Command (AMCOM) Acquisition Center shall be referred to the Deputy Assistant Secretary of the Army (Procurement) (DASA (P)), the Deputy Assistant Secretary of the Army (Acquisition Policy and Logistics) (DASA (APL)), and the Deputy Assistant Secretary of the Army (Defense Exports and Cooperation) (DASA (DEC)) for review and evaluation and ASA (ALT) for approval prior to any commitment and execution by any other acquisition office. Specific skill requirements will be identified at the Task Order (TO) level. When it is known that uniformed personnel will not be available, contractor support will become the first option considered. In other cases, the more rapid reaction time of contractors may be a governing factor in using contractor teams. Aviation SATs deployed because of this contract may be a single Contractor employee, a combination of Department of Defense personnel and Contractor employee(s), or entirely Contractor employees. Aviation services will be provided during the Aviation SAT execution phase and during the post deployment stage of an Aviation SAT mission cycle. The aviation services required are divided into two (2) categories: rotary wing training related services and rotary wing technical assistance related services. The example subtasks and explanations listed below are representative of Aviation SAT rotary wing missions that SATMO may accomplish during a TO. Potential technical assistance related mission sets are Fast Rope Insertion and Extraction System (FRIES), Special Patrol Insertion and extraction system (SPIES), Hoist, External Loads, Over water, Helicopter Arial Refuel (HAR), High Altitude Aviation Training Site (HAATS), Aerial Gunnery, Aviation Special Operations, and Air Assault/Air Movement. Provide any supporting documentation reflecting the experience. Potential qualified trainers and advisors of USAACE rotary wing pilots (SP/IP, ME/MTP, AMSO, ASO), 15 series Military Occupational Specialty codes (MOS), MOS maintainers (15B,15D,15F,15G, 15H, 15N,15R, 15Y), and 15 MOS crew members (15T, 15U) with additional qualifications of standardization instructor (SI)/ flight instructor (FI), and flight engineer (FE) and personnel capable of establishing base operations training capabilities. SPECIFIC TASKS Tasks listed herein are only examples and are not to be performed unless issued on a Task Order. These are intended to provide a sampling of the types of missions (and inherent requirements) which could reasonably be expected to be resourced and executed by the contractor. The list is by no means exhaustive, either in the nature or the scope of possible missions. Training Related Services. SATMO provides Aviation training, maintenance training, and advisory services to customer-Host Nations in several different major areas. Conduct aviation assessments to: Determine aviation training requirements. Identify aviation areas requiring technical assistance (maintenance, logistics, standardization, etc.). Host Aviation Engineering Directorate (AED) sourced airworthiness assessment teams. Evaluate aviation safety processes and programs. Conduct formal academic and flight training: Initial rotary wing qualification courses to train crewmembers in the basic skills required to operate an aircraft under day, night, and instrument condition. Aircraft qualification courses to train crewmembers to operate a specific aircraft. Aircraft series transition courses to train crewmembers that are already qualified on a specific aircraft to operate a new or different version. Training on advanced aviation skills such as night vision systems, aerial gunnery, formation flight, etc. Crew Chief, Flight Engineer, and crew communications courses. Graduate-level aviator Instructor Pilot and Maintenance Test Pilot qualification courses. Non-aircraft specific pilot courses on aviation mission planning, aerodynamics, aviation medical issues, etc. The contractor will have access to the Host Nation aviation mission planning system/device on any TO that requires AMPS duties. Conduct formal academic and hands-on demonstration training: Individual Aircraft Repairer general and aircraft specific maintenance courses. Aviation Organizational/Line Unit maintenance courses. Aviation Intermediate/Allied Shops maintenance courses. Training on advanced maintenance skills such as technical inspection, quality control, production control, maintenance management, etc. Training on supporting aviation systems including ground support equipment, special tools, aviation sets/kits/equipment, and air traffic control communication systems. Provide advice, informal training, mentorship, and assistance to: Enhance unit flight and tactical operations. Conduct individual and collective sustainment training. Promote host nation aviation safety. Assist to establish host nation aviation systems, programs, processes, and SOPs; especially in the areas of safety, operations, training, standardization, maintenance, logistics, and sustainment. Inform host nation personnel of US Army Aviation best practices and lessons learned. Technical Assistance Related Services. Provide technical assistance and expertise required to operate, maintain, sustain or return complex customer-nation aviation systems to operational readiness. Examples include: Conducting specific aircraft systems-related training courses, assisting the customer to implement an automated aviation technical supply system, or advising them on how to establish Aircrew Life Support Equipment (ALSE) training program. Each TO will address specifics on the required technical assistance tasks to be performed. Generic Aviation Maintenance Related Technical Assistance Task Statement. Provide technical assistance and expertise to repair, modernize, inspect or validate the mission readiness of host nation aviation equipment or weapon systems and its components. All final inspections will be accomplished by the Government or customer-nation. Training of customer-nation personnel is not the primary focus during these missions. Any training benefit derived is collateral to the primary mission. Essential Maintenance Related Subtasks may include: Inspect, troubleshoot and repair equipment (type of equipment TBD at TO level) IAW an Army Aviation and Missile Command Aviation Safety Action Memo (ASAM) or Safety of Flight Message (SOFM) to restore the equipment (type of equipment TBD at TO level) model helicopter to mission readiness status. Operational Planning. Analyzing emergent requirements and assisting in plan development to meet those requirements. REQUIRED QUALIFICATIONS All flying Contractor members shall meet the qualification requirements of DCMA INST 8210.1D (AR 95-20). ELIGIBILITY The applicable NAICS code for this requirement is 611512 (Flight Training), with a Small Business Size Standard of $34.0M. The Product Service Code is U099 (Education/Training - Other). Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. *NOTE 01: The current SBA Table of Small Business Size Standards was updated 17 March 2023; since the beginning of 2022, the SBA has regularly updated the table to account for inflation. Businesses must update their SAM.gov profiles to have their small business status reflect the most current small business size standards. Until updated, the SAM profiles will continue to display the small business status under outdated size standards. *NOTE 02: In accordance with 13 C.F.R. 121.104, the current calculation for dollar (monetary) value based NAICS codes is average total receipts over the last five (5) completed fiscal years *NOTE 03: In accordance with 13 C.F.R. 121.106, the current calculation for employee based NAICS codes is average number of employees used for each pay period for the preceding completed 24 calendar months. ADDITIONAL INFORMATION The estimated period of performance consists of five-year base with performance commencing in late May 2027. The Government may issue by bi-lateral extension extend the ordering period of this contract for up to an additional five (5) years provided the maximum (total contract minimum) designated in the schedule has not been exceeded. Therefore the total duration of the ordering period of performance, including the extension, shall not exceed 10 years. The contract type for task orders is anticipated to be a Firm Fixed Price. The base Indefinite Delivery Indefinite Quantity (IDIQ) contracts estimated ceiling is $249M. The Government is currently refining the acquisition strategy, and the planned approach has not yet been finalized. Your firm’s responses to this posting will assist the Government with its development. INDUSTRY DAY is being held on 3 February 2025. Individual Breakout Sessions are being held 4 February 2025. Instructions on how to register for industry day and individual breakout sessions are contained in the attachments. QUESTIONS AND ANSWERS SESSION: Individuals are encouraged to submit their technical questions via email to Ms.Shaniel Escoffery email shaniel.l.escoffery.civ@army.mil and Ms. Glenda Torres, email glenda.m.torres.civ@army.mil. no later than 3 pm, 9 January 2025. Technical questions submitted in advance will be addressed during the Questions and Answers Session at industry day, followed by an open discussion where the panel may address technical questions from the audience. No new technical questions are being accepted. SUBMISSION DETAILS (CAPABILITIES STATEMENT) Contractors are requested to submit a capabilities statement including a cover sheet of no more than 15 pages. Font shall be no smaller than Arial 10. The cover page should include company name, address, and points of contact including phone numbers and e-mail addresses. The cover sheet shall not count towards the page count. The deadline for response to the capability statement, industry day registration, and individual breakout session registration is no later than 3 pm, EST, 9 January 2025. All responses under this sources sought notice, industry day notification, and individual breakout registration must be e-mailed to Shaniel Escoffery,.shaniel.l.escoffery.civ@army.mil and Glenda Torres, email glenda.m.torres.civ@army.mil. This documentation must address at a minimum the following items: List the types of rotary wing pilot, maintainer, or base operations training capabilities your company had provided before or is currently providing. Provide contract numbers for reference, if these contracts are with the Army or other Department of Defense contracts. Describe your company’s capability and capacity to provide qualified trainers and advisors of U.S. Army Aviation Center of Excellence (USAACE) rotary wing pilots (standard pilot, instructor pilot, maintenance test flight evaluator, maintenance test pilot, aviation mission survivability officer, and aviation safety officer), and 15 series Military Occupational Specialty (MOS) jobs related to maintaining, repairing, and operating military aircraft such as maintainers (15B,15D,15F,15G, 15H, 15N,15R, 15Y) and crew members (15T, 15U) with additional qualifications of standardization instructor/ flight instructor, and flight engineer, and personnel capable of establishing base operations training capabilities. Describe your company’s experience (with examples) training and assisting in the following mission sets: FRIES, SPIES, Hoist, External Loads, Over water, HAR, HAATS, Aerial Gunnery, Aviation Special Operations, and Air Assault/Air Movement. Provide any supporting documentation reflecting the experience. This list of mission sets is not all inclusive and experience on any other type of mission sets can also be provided. Describe the company’s experience preparing employees for OCONUS deployment and meet all DoD Foreign Clearance Guide requirements for passports, visas, training and pre-deployment preparations. Does your company have experience with training, advising, and assistance with foreign customers with differing cultures to include language barriers in an austere environment? Please include OCONUS locations, types of performance/services provided, and contract numbers. Can or has your company managed a task of this nature? If so, please provide details. Can or has your company managed a team of subcontractors before? If so, provide details. What specific technical skills does your company possess which ensure capability to perform the requirements detailed above? Provide a statement including current small/large business status and company profile to include number of employees, annual revenue history, office locations, DUNs number, etc. A statement indicating if your firm is a large or small business under NAICS code 611512; if small business, please indicate any applicable socio-economic status [i.e., 8a, Small Disadvantaged Business (SDB), HUBZone, Veteran-Owned Small Business (VOSB), Service-Disabled Veteran-Owned Small Business (SDVOSB), or Women-Owned Small Business (WOSB). Your firm’s response to this Sources Sought, including any capabilities statement, shall be electronically submitted in either Microsoft Word or Portable Document Format (PDF). The information provided to this Sources Sought shall not be proprietary and may be utilized to assist the determination of the acquisition strategy to follow for this future effort. The information will be retained to document the Market Research Report and will be classified as Controlled Unclassified Information under Acquisition/Procurement disposition. All questions must be submitted to the contract specialist identified above. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought. NOTE (LIMITATIONS ON SUBCONTRACTING): If you are a small business interested in being the prime contractor for this effort, please be advised that FAR clause 52.219-14 (Limitations on Subcontracting) (DEVIATION 2021-O0008) was updated in September 2021. The current clause adds the definition of “Similarly Situated Entity” and the 50% calculation for compliance with the clause. Small business prime contractors may now count “first tier subcontractor” work performed by a “Similarly Situated Entity” as if it were performed by the prime contractor itself. To assist in our market research and set-aside determination for this effort, if you are a small business interested in priming this effort and plan to utilize a “Similarly Situated Entity” to meet the Limitations on Subcontracting requirements, please identify the name & Unique Entity ID/CAGE Code of the specific firm(s) you intend to partner/subcontract with to meet the requirements as well as their SB size status under the NAICS that you as the prime would assign for their workshare. Information regarding any planned “Similarly Situated Entity” should be included in answering any questions outlined in the SSN in order to assist the Government's capability determination. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A “REQUEST FOR PROPOSAL (RFP)” TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMATION PERTAINING TO THIS REQUIREMENT. AMENDMENT 01- Providing Slides presented by the Govt at Industry Day, as well as the KTR POC Email list. Questions received are under review and will be provided at a later date. All documents have been cleared for released.
65%
Market Research01/17/2025
********************************AMENDMENT 0001************************************* Amendment 0001 to SIR 6973GH-26-R-00199 is issued to re-open the SIR, extend the close date of the SIR, answer un-posted questions from industry that were received within the allowed question and answer SIR period, update the Schedule B. SEE BELOW: FIRST: SIR is re-opened SECOND: SIR close date is changed from 08/26/2026 to 11/23/2026 THIRD: Please see SIR Questions and Answers (attached). Whether you previously provided a proposal or have not provided a proposal to this point, anyone is eliglble to provide a proposal before the new SIR close date. If you have previously provided a proposal to SIR 6973GH-26-R-00199, the contracting officer will be reach out with instructions. FOURTH: Clause AC1604 CONTRACT PERIOD is updated to make the new period of performance (POP) as follows: The effective period of this contract is 1 year from 01/19/2027, plus four, 1-year options if exercised. FIFTH: Schedule B dated 07/08/2026 is removed and replace by Schedule B Rev. 1 dated 11/06/2026. The Schedule B is updated to correct description of the Bell 412 Maintenance Initial Training. The POP is also updated to reflect the new POP. SIXTH: M.8 Evaluation Criteria Factor 5 is removed and replaced with the following language: FACTOR 4: THE OFFEROR MUST PROVIDE THE QUALIFICATION STATEMENTS AND RESUMES OF THE INSTRUCTORS IN ACCORDANCE WITH THE PWS & THE SOLICITATION. CRITERIA: Persons utilized as instructors must provide evidence of professional technician’s experience as outlined in Section G.5 of the PWS. a. A professional Maintenance Technician with five (5) years of industry experience. b. Minimum of three (3) years of experience with each aircraft being proposed under Section A; AND c. Minimum of three (3) years of instructor experience ACCEPTABLE: The Standard is met when the offeror meets provides qualification statements and resumes of the instructors to meet the requirements of section G.5 of the PWS and solicitation requirements. SEVENTH: Clause AC0250 was included in error and has been removed. EIGHTH: All other terms and conditions remain unchanged. ****************************************************************************** The Federal Aviation Administration (FAA), Mike Monroney Aeronautical Center (MMAC), Oklahoma City, Oklahoma, has a requirement for Helicopter Field Maintenance Training IAW Air Transport Association (ATA) 104 Specifications for Federal Aviation Administration (FAA) Airworthiness (Maintenance/Avionics) Inspectors on the following helicopters: Bell 206B Field Maintenance Training, Bell 429 Field Maintenance Training, Bell 407 Field Maintenance Training and Bell 412 Maintenance Initial Training. It is the intent of the Government to award multiple contract(s) using an Indefinite Delivery/Requirements type Contract priced by CLIN with student qualifier for a one (1) year base period and four (4) option years, if exercised. The Government intends to award multiple contracts. The intent is to award each aircraft type to the Lowest Price Technically Acceptable (LPTA) Offeror. Each aircraft requirement is identified by separate CLINs in Schedule B and competition will be on an aircraft by aircraft basis. Resulting contract will be awarded to the Lowest Price Technically Acceptable (LPTA) Offeror per aircraft. The awarded contract(s) may contain many, few, or one aircraft depending on the competition results. NO PHONE CALLS PLEASE. ALL QUESTIONS MUST BE IN WRITING AND EMAILED TO THE CONTRACTING SPECIALIST. CONTACT INFORMATION BELOW. All interested sources should first attempt to download the attached SIR and supporting document(s). If downloading is not possible, all request for copies of the SIR documents(s) must be made in writing to the attention of Gilbert Park, Contracting Specialist (AAQ-740), via e-mail at gilbert.n.park@faa.gov. Any and all questions pertaining to this SIR should be submitted in writing to the contract specialist at, gilbert.n.park@faa.gov by 3:00 p.m. CST on August 10, 2026 to allow for adequate response time. No questions will be allowed after that date and time. Technical and cost proposals must be received by the FAA no later than 5:00 P.M. CST, August 26, 2026. Proposals must be submitted electronically to gilbert.n.park@faa.gov, and addressed with the SIR Number 6973GH-26- R-00199. All submittals will need to allow sufficient time to process through security procedures in place at the Aeronautical Center. In accordance with SIR Section L provision 3.2.2.3-14 entitled, "Late Submissions, Modifications, and Withdrawals of Submittals," any proposals received after the due time and date of 5:00 p.m. CST, August 26, 2026, will not be considered. In addition, if all requested information is not furnished in the offeror's proposal, the offeror's proposal may be determined to be non-responsive and ineligible for consideration for contract award. The SIR/RFO is not to be construed as a contract or a commitment of any kind. The Government shall not be liable for payment of any costs attributed to the preparation and submission of requested proposal documentation. Note: If you are viewing this from a third party source, other than the Sam website, please visit the Sam site at sam.gov, as some attachments do not transfer correctly to other websites.
57%
Combined Synopsis11/23/2026
This amendment extends the due date for quote submissions. The United States Marine Corps (USMC) has a requirement to provide its Aircraft Rescue and Fire Fighting (ARFF) personnel with realistic, hands-on, live-fire training to meet operational, safety, and qualification mandates. Historically, this training has been conducted organically at military facilities; however, a training gap during planning and construction of new facilities drives the need for commercial offsite training procured on an ad hoc basis. This competitive, small business set-aside acquisition will result in the award of a single award Indefinite Delivery, Indefinite Quantity (IDIQ) contract with a five (5) year ordering period.
57%
Combined Synopsis08/14/2026

Additional Details

Solicitation Number

W912HQ26S0043

Archive Date

Jul 21, 2026

Office Address

ALEXANDRIA, VA, 22315-3860