GovChime
Notice ID: d75e7e79e4cd49558c43866a830a1682Sources Sought

Ultrasonic Testing/Inspection

Archived on August 10, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−05:00
Posted
July 24, 2024
Notice type
Sources Sought
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
541380: Testing Laboratories and Services
Agency
Department of WarDepartment of the Army

Notice details

Office
W2R2 USA ENGR R AND D CTR
Place of performance
Louisville, KY
Last updated
Dec 4, 2025

Identifiers

Solicitation number
W912HZ24Q0047
Notice ID
d75e7e79e4cd49558c43866a830a1682

Description

Notice of Sources Sought The purpose of this Sources Sought Announcement is for market research to make appropriate acquisition decisions and to gain knowledge of potential qualified Small Businesses interested and capable of providing items requested, as well as any large businesses. The results from this source sought notice will be used to determine set-aside. Please provide your capability statement along with your business size and cage code. The intended contract is a firm-fixed price. Contractor shall supply eight (8) Level II nondestructive testing (NDT) technicians to conduct ultrasonic testing of weld specimens for research purposes. Each technician shall test 21 welds totaling 15.1 linear feet. These welds are distributed among 20 specimens representing a variety of butt joints, t-joints, and corner joints found in existing HSS (Exhibit A). Testing will take place at the US Army Corps of Engineers Regional Rivers Repair Fleet (LR3F) Facility, 2605 Shippingport Drive, Louisville, KY. Testing will take place during business hours (8:00 AM 5:00 PM) and during consecutive weekdays (Monday Friday) anytime from Tuesday, January 21, 2025 through Friday, February 14, 2025. The contractor shall select appropriate dates during this window of time when all eight technicians can be present at the facility at the same time. Each Level II NDT technician shall be certified in accordance with either American Society of Nondestructive Testing (ASNT) Recommended Practice SNT-TC-1A or ANSI/ASNT CP-189. Each technician shall possess verifiable experience conducting ultrasonic NDT of USACE HSS on multiple prior occasions. Each technician shall provide an ultrasonic testing instrument and shall be fully capable of calibrating and operating that instrument. During testing, technicians may not share or exchange ultrasonic testing instruments. Each technician shall supply all other equipment or materials that may be required for ultrasonic testing such as consumables (gel, rags, etc.). Testing will take place outdoors, on barges, and around water. Contractor shall ensure that each NDT technician is equipped with the appropriate Occupational and Safety and Health Administration (OSHA) approved personal protective equipment (PPE) that is required at marine construction sites, including hard hat, steel-toed boots, a high visibility safety vest, and eye protection. To maintain statistical independence of the experimental observations, it is critical that each technician work independently. Therefore, technicians may not discuss the results of their inspections with one another or otherwise share information about the specimens during or after the experiment. ERDC will supervise testing of the specimens to ensure technicians do not share information with one another. Upon the conclusion of each inspection

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W912HZ24Q0047
  1. Market Research

Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)

  1. Market ResearchCurrentJul 24, 2024

    Ultrasonic Testing/Inspection

    Notice d75e7e79e4cd49558c43866a830a1682 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
***** This Amendment is to Extend the Due Time to 3:00 PM EST 17 April 2026 *****The work required under this agreement will primarily involve analysis of water, chlorophyll, phytoplankton, and benthic macroinvertebrates samples. All work shall be performed in strict compliance with the attached specifications and all other terms, clauses, and conditions incorporated herein. Quotes are due on 17 April 2026 at 11:00 AM Eastern Time.
-Solicitation04/17/2026
The U.S. Army Corps of Engineers - St. Paul District is seeking a contractor to perform groundwater monitoring services in support of the Grand Encampment Dredge Material Placement Site Unload project along the Zumbro River near Kellogg, MN in Wabasha County. This solicitation is 100% set-aside for small business under NAICS 541380 with a size standard of $19 million. The contractor will collect water samples from three monitoring wells and up to four government-selected residential wells before, during and after the active unloading of the site in Spring 2027. During the active unload phase samples will also be collected from the river upstream of the site and from standing water within the active dredged-material placement/infiltration pit. Water samples will be analyzed by an environmental analytical testing laboratory accredited under the Minnesota Environmental Laboratory Accreditation Program (MNELAP) for all specified methods and parameters. Pre-Placement (Phase 1) samples will be collected and tested approximately 90, 60 and 30 days prior to the start of the active hydraulic transfer of stockpiled dredge materials to the upland placement site. Samples will be collected and tested during Active Placement (Phase 2) approximately 3, 17, and 31 days after the transfer begins, with options for additional sample collection and testing at approximately 45, 59 and 73 days after start of transfer. Post-Placement (Phase 3) samples will be collected and tested approximately 30, 60 and 90 days after the completion of the materials transfer. The contractor will prepare a final sampling and analysis report, submitted within 50 days of testing completion. All questions should be submitted in writing via the PIEE module Q and A section. Offers should be submitted via the PIEE Module. Click the first link in the Attachments/Links section.
-Solicitation11/18/2026
Combined Synopsis/Solicitation W911N226QA061 has been awarded.
-AwardedOpen
This is a PRE-SOLICITATION NOTICE. It is NOT a request for quotes (RFQ), invitation for bids (IFB), or request for proposals (RFP). This notice is provided for information and planning purposes only. It does not obligate the Government to any contractual action, including issuing a solicitation or awarding a contract. This is a statement that the Government intends to issue a Request for Quotes (RFQ) solicitation in the near future. The U.S. Army Corps of Engineers - St. Paul District will issue a Request for Quotes (RFQ) solicitation for a contractor to perform groundwater monitoring services in support of the Grand Encampment Dredge Material Placement Site Unload project along the Zumbro River near Kellogg, MN in Wabasha County. This solicitation will be 100% set-aside for small business under NAICS 541380 with a size standard of $19 million. The contractor will collect water samples from three monitoring wells and up to four government-selected residential wells before, during and after the active unloading of the site in Spring 2027. During the active unload phase samples will also be collected from the river upstream of the site and from standing water within the active dredged-material placement/infiltration pit. Water samples will be analyzed by an environmental analytical testing laboratory accredited under the Minnesota Environmental Laboratory Accreditation Program (MNELAP) for all specified methods and parameters. Pre-Placement (Phase 1) samples will be collected and tested approximately 90, 60 and 30 days prior to the start of the active hydraulic transfer of stockpiled dredge materials to the upland placement site. Samples will be collected and tested during Active Placement (Phase 2) approximately 3, 17, and 31 days after the transfer begins, with options for additional sample collection and testing at approximately 45, 59 and 73 days after start of transfer. Post-Placement (Phase 3) samples will be collected and tested approximately 30, 60 and 90 days after the completion of the materials transfer. The contractor will prepare a final sampling and analysis report, submitted within 50 days of testing completion.
-Pre-SolicitationOpen
Final QUESTIN/ANSWERS Spreadsheet uploaded. _____________________________________________________________________________ QUESTIONS/ANSWERS POSTED. Solicitation extended to 10 Nov 2026, 10am(CT). ______________________________________________________________________________ Amendment 0001 - 1st paragraph page 1, changed quantity of 400 to 100 and 25 to 10. _______________________________________________________________________________ Requirement - Helium Inspection Services. Read all attachments. Please make certain Cage Code is current.
-Solicitation11/10/2026

Additional Details

Solicitation Number

W912HZ24Q0047

Archive Date

Aug 10, 2024

Office Address

VICKSBURG, MS, 39180-6199