Special Notice to Sole Source Master BPA Explosion Effects and Blast Loading Device and Supplies
Archived on October 30, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM CDT
- Posted
- October 7, 2026
- Notice type
- Special Notice
- Set-aside
- No Set aside used
- NAICS
- 325920: Explosives Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- US ARMY CORPS OF ENGINEERS.SCO ALEXANDRIA.ENGINEER RESEARCH AND DEVELOPMENT CENTER.W2R2 USA ENGR R & D CTR
- Place of performance
- Vicksburg, Mississippi, 39180
- Last updated
- Oct 30, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W912HZ27Z1CQ9
- Notice ID
- 73cf4d8b9fa644b5babe5741ddcf0ae6
Description
The US Army Corps of Engineers, Engineer Research and Development Center (ERDC) Geotechnical and Structures (GSL) intends to issue an award (IAW RFO FAR 12.102 (b)) to Teledyne Risi, Inc., (CAGE: 3K871), 32727 S Corral Hollow Rd, Tracy, California 95377 for a New Master Blanket Purchase Agreement (BPA) for Explosive Effects and Blast Loading supplies and devices. GSL researchers typically employ exploding bridge-wire (EBW) detonators as a safe, reliable means of initiating explosive detonations. To enable safe and continual blast testing operations, GSL requires a Master Blanket Purchase Agreement that includes all critical components with the use of EBWs.
The requirement is for FS-17 Control Units and Firing Systems, EBW Detonators, and various high voltage cables throughout the proposed five (5) year ordering period. The requested items are listed below, but not limited to:
- EBW Detonators
- (RP-80, RP-83, RP-1, RP-2, RP-3, RP-87, BK-80 Ignitor)
- Twin Lead High Voltage Cables (1,000ft)
- Type ‘C’ High Voltage Coax Cables with Connectors and Flying Leads or Ends
- Coax 250ft – 1000ft Spool
- Coax Cable with 31 Connector
- RP-80 and RP-83 Non-Bridged Headed EBW’s
- FS-17 Control Units
- FS-17 Firing Modules
The intended procurement will be classified under North American Industry Classification System (NAICS) 325920 – Explosive Manufacturing with a size standard of 750 employees.
This notice of intent is not a request for competitive quotes and no solicitation document exists for this requirement. However, parties interested in responding to this notice shall submit capable quotes, including price, sufficient to determine capability in providing the supplies. All capability statements received by the closing date of this publication of this synopsis will be considered by the Government. A determination by the Government not to compete based on responses to this notice is solely within the discretion of the Government.
Capability statements shall be submitted only by e-mail as a Microsoft Office Word, Microsoft Office Excel, or Adobe PDF attachment to Shinita.M.Jordan@usace.army.mil and Sonia.J.Boyd@usace.army.mil. Statements are due by 3:00pm Central Time, Thursday, 15 October 2026. Oral communications are not acceptable in response to this notice.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
- 1Version 1Special NoticeCurrent
Special Notice to Sole Source Master BPA Explosion Effects and Blast Loading Device and Supplies
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
30 June 2026 Update v2 - Upload a corrected version of FY26 Army Ammunition Plant Mod Plan, "FY26-AAPModPlan v21-DOW-Contractors" 30 June 2026 Update - Upload RFAAP Baseline Environmental Conditions Assessment (BECA), "CUI_RFAAP BECA_v1 29Jun2026" - Upload BECA Appendices A through I - Upload FY26 Army Ammunition Plant Mod Plan, "FY26-AAPModPlan v21-DOW-Contractors (1)" 16 June 2026 Update - Upload RFAAP Baseline Facilities Assessment (BFA), "CUI_RFAAP BFA _v1 11Jun2026" NOTE: The BFA references multiple Appendices. In order to gain access to these appendices, please email the following individuals who will provide a DOD SAFE drop off due to the amount of files and organizational structure of the files, which is not suitable for SAM.gov. Ms. Anna Whitcomb at anna.e.whitcomb2.civ@army.mil Ms. Amanda Carlson at amanda.l.carlson25.civ@army.mil Mr. Derek Rooks at derek.s.rooks.civ@army.mil 7/11/25 Update: Upload Attachment - Virtual Library Use and Non-Disclosure Agreement. As noted below, this agreement must be completed by the requesting firm’s Data Custodian. The completed forms shall be submitted electronically to: - Ms. Anna Whitcomb at anna.e.whitcomb2.civ@army.mil - Ms. Amanda Carlson at amanda.l.carlson25.civ@army.mil - Mr. Derek Rooks at derek.s.rooks.civ@army.mil _______________________________________________________________________ This virtual library is being established to serve as a data repository that houses documents to support proposal development for the RFAAP competition. In order to receive access to the virtual library the following conditions must be met: 1. Companies must be registered with the U.S./Canada Joint Certification Program (JCP) and have an active DD 2345, Military Critical Technical Data Agreement, on file with Defense Logistics Information Service (DLIS). Virtual library accounts will only be provided to the Data Custodian of those firms with an active DD 2345. 2. A Virtual Library Use and Non-Disclosure Agreement (attached) must be completed by the requesting firm’s Data Custodian. The completed forms shall be submitted electronically to: - Ms. Anna Whitcomb at anna.e.whitcomb2.civ@army.mil - Ms. Amanda Carlson at amanda.l.carlson25.civ@army.mil - Mr. Derek Rooks at derek.s.rooks.civ@army.mil The Government intends to upload documents to the virtual library throughout the pre-solicitiation and solicitation phases. It is the contractor's responsibility to review the site to obtain the most recent information available. Questions related to virtual library access should be directed to all of the above points of contact. | - | Pre-Solicitation | 06/26/2027 |
U.S. Army Combat Capabilities Development Command – Armaments Center (DEVCOM-AC), Munitions Engineering Technology Center (METC), Explosives Integration Branch FCDD-ACM-EW at Picatinny Arsenal, NJ, is conducting market research to determine the ability to manufacture and produce Pentolite. DISCLAIMER: “THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A “REQUEST FOR PROPOSAL (RFP)” TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMATION PERTAINING TO THIS REQUIREMENT.” REQUIREMENT: Pentolite is a sensitive secondary HE very often used for NOL (Naval Ordinance Laboratory) Large and Extra-Large Scale Card Gap Tests (LSGT & ELSGT). AOP-7 and DoW specifications require that materials be qualified via these tests before being considered for use in any DoW items.. Similar, lower-grade material is manufactured by other sources for commercial mining and blasting operations. It is feasible for one of these facilities to accept a DoW contract for the higher-grade material required. SUBMISSION DETAILS: Interested vendors are strongly encouraged to submit a capabilities statement with the following information: NAICS: 325920 – Explosives Manufacturing PSC: 1375 – Demolition Materials & Bulk Explosives Ability to provide a product that meets the above specifications. Historical information demonstrating you have the ability to provide the product (contract number(s), dollar value(s), Point of Contacts, and brief description of work performed). In addition, please provide Full company name and address, point of contact with telephone number and email address, CAGE Code and DUNS number, size of business (i.e. large, small, disadvantaged, veteran owned, woman owned, etc.) and applicable NAICS and Product Service Code’s (PSC), and website (if applicable). Vendors must be properly registered in the Government System for Award Management database (SAM). Contractors may obtain information on SAM registration and annual confirmation of requirements by calling 1-866-606-8220, or via the Internet at www.sam.gov. This is a market survey for information only and shall not be construed as a request for a proposal or as an obligation on the part of the US Government. The US Government does not intend to award a contract on the basis of this market survey or otherwise pay for information solicited. The official response must be submitted to the U.S. Army Contracting Command – Rock Island at Picatinny. Please send responses to Contracting/Agreements Officer Charlotte Sylvain-Ceraul at charlotte.a.sylvain-ceraul.civ@army.mil and Contract Specialist, Antonius Gill at antonius.gill.civ@army.mil no later than November 16, 2026, at 3:30 p.m. Eastern Standard Time. Phone inquiries will not be accepted; all questions must be submitted in writing via email. Respondents will not receive notification regarding the results of the survey. | - | Market Research | 11/16/2026 |
This Request for Proposal (RFP) will result in a single Firm Fixed Price (FFP) award to procure Thin Layer Explosive (TLX), Detonating Cord Assembly (DCA) (multiple DODICS). This RFP is restricted to one or a limited number of responsible sources, as authorized by 10 U.S.C. 3204(a)(1) and Federal Acquisition Regulation (FAR) Revolutionary FAR Overhaul (RFO) 6.103-1(b). To be eligible for award, the Offeror must submit a valid Qualification Acceptance Letter, or Government approved equivalent, signed by an authorized Government engineer verifying their status as a qualified source for this requirement. | - | Solicitation | 12/04/2026 |
Login at https://piee.eb.mil and search for 'W15QKN26RA085' to obtain more details.* | - | Combined Synopsis | 10/30/2026 |
Please refer to Section A narrative of this Amendment to review all changes to subject solicitation. The proposal deadline as been extended to 31 August 2026 at 2:00 P.M. CDT. | - | Solicitation | 08/31/2026 |
Additional Details
Solicitation Number
W912HZ27Z1CQ9
Archive Date
Oct 30, 2026
Office Address
VICKSBURG, MS, 39180-6199