GovChime
Notice ID: fafbf6ca2e7237971a265cc95c0a5ee1Combined Synopsis/Solicitation

Vehicle Maintenance Lubrication System

Archived on September 24, 2016. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
9:00 PM UTC+02:00
Posted
August 18, 2016
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
424720: Petroleum and Petroleum Products Merchant Wholesalers (except Bulk Stations and Terminals)
Agency
Department of WarDepartment of the Army

Notice details

Office
W7NG USPFO ACTIVITY MNANG 148
Place of performance
Duluth, 55811
PSC
45: PLUMBING, HEATING, WASTE DISPOSAL
Last updated
Dec 5, 2025

Identifiers

Solicitation number
W912LM16T4087
Notice ID
fafbf6ca2e7237971a265cc95c0a5ee1

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement is being issued as a request for quotation (RFQ) and constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-89. This combined synopsis/solicitation is set-aside 100% for small business. North American Industrial Classification Standard 424720 applies to this solicitation; business size standard is 500 employees. The Contracting Officer reserves the right to award under a different NAICS if the company would qualify as a small business under the solicited NAICS. The following is needed: -Provision and install of Vehicle Maintenance Lubrication System. The 148th Vehicle Maintenance Shop is looking to replace the existing lube dispensing system with new tanks, pumps, piping, and lube guns. The current tanks are failing due to moisture getting in the steel tanks and causing rust. The grease lines also need to be replaced due to improper sizing and the lube lines will also be extended to the Refueler Maintenance Stall. The addition of anti-freeze and windshield washer fluid on a gun is also being requested. The current waste oil tank is also in need of replacement. This project will likely require a site visit by any contractor wishing to bid on it. The following is only a rough estimate of required components to indicate the scope of this project: Qty. 2 275 gal steel bulk tanks for ATF and 5W-40 Qty. 1 130 gal steel bulk tank 80-90 Qty. 2 110 gal Dual Wall bulk tanks for Windshield wash and anti-freeze Qty. 1 660 gal Dual Wall waste oil tank Qty. 16 Preset meters Qty. 18 Lube, grease, anti-freeze, and windshield wash hose reels Qty. 1 200 gallon plastic soap container Qty. 3 Lubrication dispensing pumps (air operated) Qty. 1 Grease dispensing pump (air operated) Qty. 2 Anti-freeze and windshield wash dispensing pump (air operated) Qty. 3 Air hose reels and air regulators All tanks installed will require plumbing for filling, and breathers to prevent moisture from getting in the tanks. The system will also require manual spigots so as to fill containers when power or air in not available. All the flammable liquids will need a NFPA rated tank. Up to 500 feet of plumbing may be required for install of this system. More information will be provided on request to capable vendors. Site visit dates are scheduled for 31 August. All vendors wanting access to base will need to contact MSgt Fisher (usaf.mn.148-fw.list.msc-personnel@mail.mil) within a week of site visit dates, fill out a background request form, and successfully pass a background check. ****Quotation instructions**** Multiple solutions to the requirement should be offered as alternative quotes and will be evaluated as separate offers. Multiple solutions are encouraged. Innovative solutions are encouraged and will be evaluated in accordance with the intent of this requirement. Quotes may be comparatively evaluated in compliance with FAR 13.106-2 (b) (3). Vendor must provide a list of all items to be provided, the quantity and country of origin. Failure to provide country of origin may disqualify a quote if the contracting officer is unable to determine the country of origin. If an individual item of supply is valued over $5,000, contractor must comply with 252.211-7003 Item Unique Identification and Valuation. VIN, MEID, ESN, GIAI, and GRAI are considered equivalent of a IUID. Response is encouraged to include past performance information: other military, commercial, and civilian companies with whom you have done business. Include country of manufacture for all items. Include feasible delivery/installation dates as well. GOVERNMENT INTENDS TO ISSUE ONE (1) CONTRACT BUT RESERVES THE RIGHT TO CONSIDER PARTIAL OR MULTIPLE AWARDS. If not already registered in SAM, go to WWW.SAM.GOV to register prior to submitting quote. All questions and quotes must be directed to 148 Contracting Officer via email at usaf.mn.148-fw.list.msc-personnel@mail.mil . Questions asked within 1 week of solicitation close will be answered at the discretion of the Contracting Officer. Please make quotes good for 30 days, if possible. Emailed quotes are preferred. Late quotes may be rejected at the Contracting Officer's discretion. Electronic Documents: All electronic documents must NOT be "secured", "locked", or otherwise inaccessible. Submitter risks rejection if documents prove inhospitable to viewing and evaluation. Utilize standard Microsoft or Adobe formats, and net file size of all documents should be less than 10MB. ****Clauses and Provisions**** FAR 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS OCT 2015 FAR 52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING JUL 2015 FAR 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE JUL 2015 FAR 52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS DEC 2014 FAR 52.207-4 ECONOMIC PURCHASE QUANTITY--SUPPLIES AUG 1987 FAR 52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW FEB 2016 FAR 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS OCT 2015 FAR 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS APR 2016 FAR 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS -- ALTERNATE I OCT 2014 FAR 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS MAY 2015 FAR 52.212-5 (Deviation) CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS MAR 2016 FAR 52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION JUL 2013 FAR 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE NOV 2011 FAR 52.222-19 CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES FEB 2016 FAR 52.222-21 PROHIBITION OF SEGREGATED FACILITIES APR 2015 FAR 52.222-26 EQUAL OPPORTUNITY APR 2015 FAR 52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES JUL 2014 FAR 52.222-50 COMBATING TRAFFICKING IN PERSONS MAR 2015 FAR 52.223-15 ENERGY EFFICIENCY IN ENERGY-CONSUMING PRODUCTS DEC 2007 FAR 52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING AUG 2011 FAR 52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES JUN 2008 FAR 52.225-18 PLACE OF MANUFACTURE MAR 2015 FAR 52.225-25 PROHIBITION ON CONTRACTING WITH ENTITIES ENGAGING IN CERTAIN ACTIVITIES OR TRANSACTIONS RELATING TO IRAN--REPRESENTATION AND CERTIFICATIONS OCT 2015 FAR 52.232-18 AVAILABILITY OF FUNDS APR 1984 FAR 52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS JUN 2013 FAR 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS DEC 2013 DFARS 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS, JUN 2012 DFARS 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) DFARS 252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS SEP 2011 DFARS 252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS SEP 2013 DFARS 252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS NOV 2011 DFARS 252.203-7997 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIATION 2016-O0003) OCT 2015 DFARS 252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS DEC 2015 DFARS 252.204-7011 ALTERNATIVE LINE-ITEM STRUCTURE SEP 2011 DFARS 252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING DEC 2015 DFARS 252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT MAY 2016 DFARS 252.213-7000 NOTICE TO PROSPECTIVE SUPPLIERS ON USE OF PAST PERFORMANCE INFORMATION RETRIEVAL SYSTEM--STATISTICAL REPORTING IN PAST PERFORMANCE EVALUATIONS JUN 2015 DFARS 252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM JUN 2013 DFARS 252.225-7048 EXPORT-CONTROLLED ITEMS JUN 2013 DFARS 252.232-7010 LEVIES ON CONTRACT PAYMENTS DEC 2006 DFARS 252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS JUN 2013 DFARS 252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA--BASIC APR 2014

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:W912LM16T4087
  1. Combined Synopsis
  1. Combined SynopsisCurrentAug 18, 2016

    Vehicle Maintenance Lubrication System

    Notice fafbf6ca2e7237971a265cc95c0a5ee1 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Fuel storage tank
-Combined Synopsis09/25/2026
Amendment issued to answer venodr's questions.
-Special Notice09/26/2027
Lawn Mower with Trade In, see solicitation for details.
-AwardedOpen
This is a Sources Sought Notice for market research purposes only and does NOT constitute a Request for Proposal (RFP), Request for Quote (RFQ), or Invitation for Bid (IFB). No formal solicitation exists at this time. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The Government will not reimburse respondents for any costs incurred in developing or submitting information in response to this notice. The Minnesota Army National Guard is conducting market research to identify qualified manufacturers or authorized distributors capable of providing a 0-16,000 ft-lbs Digital Torque Multiplier that is also authorized for use on CH-47 Chinook helicopters. The results of this market research will determine the set-aside status. The capabilities of the requested items shall meet or exceed the capabilities of NSN 5120-01-708-0605, ATP16000, listed below: Rated for upto 16,000 ft-lbs of manual/non-powered torque at a maximum input of no more than 97 ft-lbs Authorized for use on a CH-47 Chinook Helicopter Main Rotor Breakaway Calibration Certificate traceable to N.I.S.T. The weight of the item not to exceed 85 pounds Include a No-FOD (foreign object damage) 1/2 inch ratcheting input wrench Include a durable, air-tight storage case with custom fitting foam Include a digital controller and charger Interest vendors capable of supplying an item that meet or exceed above salient characteristics are invited to submit a brief capability package containing: Comany Profile Business Size and Socioeconomic Status State whether you are the Original Equipment Manufacturer or an authorized reseller/distributor Technical documentation Current availability on any existing Government contract vehicles Submit responses to the POC's email no later than the date listed in the sources sought. Please include the Subject Line: "Sources Sought Response - Torque Multiplier - [Your Company Name]"
-Market Research11/20/2026
The U.S. Army Corps of Engineers - St. Paul District requires a shipyard with a drydock to inspect, refurbish and modify Barge 774, a 110 ft x 26 ft x 5 ft steel equipment barge. Contractor will pick up the barge at Lock and Dam 7 (UMRM 702.5), La Crescent, MN after November 30, transport it to their facility, raise the vessel on a drydock, pressure blast the hull and thoroughly inspect. Work includes (but is not limited to) complete removal and replacement of timber/wood decking, spud repositioning and fabrication/installation of new spud wells, moving existing winches to new positions and replacing wire rope, re-routing three-phase 480-volt power to winches, painting the hull and extending/replacing the 30 ft spuds to 40 ft spuds. Contractor will prepare estimates for any out of scope repairs required to return the barge to full operational condition. All work shall be completed and the barge returned to Lock and Dam 7 no later than 1 April 2027. This solicitation is 100 percent set-aside for small business under NAICS 336611, with an SBA size standard of 1,300 employees. Offerors are requested to submit their quotes through the PIEE module. Offerors must be fully registered in the System for Award Management (SAM.gov) in order to receive a Federal Government contract.
-Solicitation11/12/2026

Additional Details

Solicitation Number

W912LM16T4087

Archive Date

Sep 24, 2016