Notice ID: 5b6bf96860e1dabde6042f15c5019261Award NoticeAwarded
59--AWARD NOTICE - LIGHT CURTAINS AND OVERHEAD DOOR OPERATORS
Awarded on September 29, 2015. Full description on SAM.gov.
Awarded tounder W912MM15P0116 (source: SAM.gov award notice)• $53.4K
Overview
- Posted
- October 2, 2015
- Notice type
- Award Notice
- NAICS
- 335999: All Other Miscellaneous Electrical Equipment and Component Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W7N0 USPFO ACTIVITY SDANG 114
- Place of performance
- 114 FW/MSC South Dakota ANG, 1201 West Algonquin Street Sioux Falls SD 57104-0264 US
- PSC
- 59: ELECTRICAL/ELECTRONIC EQPT COMPNTS
- Last updated
- Dec 5, 2025
- Award date
- Sep 29, 2015
- Award amount (SAM.gov award notice)
- $53.4K
Identifiers
- Solicitation number
- W912MM15T0054
- Notice ID
- 5b6bf96860e1dabde6042f15c5019261
- Award number (PIID)
- W912MM15P0116
Description
FURNISH AND INSTALL LIGHT CURTAINS AND DOOR OPERATORS
Award Overview
Award Number
W912MM15P0116
Award Amount (SAM.gov award notice)
$53.4K
Award Date
Sep 29, 2015
Awardee
Original Solicitation
Notice ID: 5b6bf96860e1dabde6042f15c5019261
Posted Date: Oct 2, 2015
Original Response Deadline: Not specified
Contacts
Contracting Officer
Primary Contact
Kurtis Lunstra, 605-988-5933 114 FW/MSC
Documents
No documents available.
Lifecycle
Solicitation:
W912MM15T0054- Combined Synopsis
- Awarded
This opportunity has been awarded.
- 2×Combined SynopsisSep 16, 2015
59--LIGHT CURTAINS AND OVERHEAD DOOR OPERATORS
- AwardedCurrentOct 2, 2015
59--AWARD NOTICE - LIGHT CURTAINS AND OVERHEAD DOOR OPERATORS
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
4 TON HVAC UNIT - Bard | - | Combined Synopsis | 11/16/2026 |
The U.S. Army Corps of Engineers (USACE), Chicago District, is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support the requirement of six high voltage power supplies (HVPS) for Barriers IIA and IIB near Romeoville, Illinois. The intention is to procure this requirement on a competitive basis.*************BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES (IN FULL OR IN PART) OR PROCURED THROUGH FULL AND OPEN COMPETITION, and multiple awards MAY be made. USACE is conducting market research to determine whether a small business set-aside is achievable under the newly restructured terms, or whether it will proceed under full and open competition with subcontracting opportunities. We recently solicited unrestricted but had a bid bust, so are restructuring our requirement with the elimination of storage requirements. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.*************DISCLAIMER*************THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMMATION PERTAINING TO THIS REQUIREMENT.*************PROGRAM BACKGROUND: The HPVS support Chicago Sanitary and Ship Canal Electric Dispersal Barrier System, barriers IIA and IIB. These Electric Dispersal Barriers protect the Great Lakes from the invasive species.*************REQUIRED CAPABILITIES*************The Contractor shall provide engineering and site verification; design submittals; fabrication; factory acceptance testing (FAT); operator and maintenance training during or immediately after FAT; technical documentation; packaging, transportation, delivery and unloading; and warranty coverage services in support of the areas specified in Program Background (above). Further details: a) Four 1.5 megawatt (MW) high voltage power supplies for Pulser 1 and Pulser 2 at Barriers IIA and IIB. and b) Two 350 kilowatt (kW) high voltage power supplies for Pulser 3 at Barriers IIA and IIB.*************Technical capability overview*************The replacement equipment will support existing pulse generating units and capacitor banks serving the electric dispersal barriers. The following summarizes the anticipated requirement for market research; it is not a complete fabrication specification.*************Input power: 480 volts AC, three-phase, 60 hertz.*************Output ratings: each 1.5 MW unit to provide 2,000 volts DC at 750 amperes and 2,200 volts DC at approximately 682 amperes, subject to its 1.5 MW continuous power limit. Each 350 kW unit to provide up to 1,000 volts DC at 350 amperes.*************Power conversion: copper-wound transformers and a 24-pulse silicon controlled rectifier (SCR) configuration, or an equivalent approach for Government consideration that achieves the required performance and harmonic reduction.*************Integration: compatibility with existing equipment spaces, access routes, electrical connections, cooling systems, and the Pulse Generating Control System. Identify any necessary changes to existing equipment or interfaces rather than assuming they are included in this procurement.*************Controls and safety: local and remote monitoring, communications, alarms, protective devices, and interlocks compatible with facility requirements. Existing interfaces include DeviceNet; the draft SOW also addresses Modbus TCP/IP.*************Operating conditions: continuous barrier service, compatibility with the pulsed load and existing capacitor banks, and the draft SOW ambient range of 0 to 50 degrees Celsius and up to 95 percent non-condensing relative humidity.*************Cooling and handling: demonstrate feasible heat rejection within available site cooling capacity and identify equipment dimensions, weights, lifting provisions, shipping configuration, and delivery/unloading needs. Early design submittals would establish dimensions, weights, anchorage, power and control connections, communications, cooling requirements, and heat loads in sufficient detail for USACE to develop the separate installation design while fabrication proceeds. Final deliverables would include drawings of the equipment as fabricated, Operation and Maintenance manuals, test reports, training materials, and storage/preservation instructions.***************************************If your organization has the potential capacity to perform this requirement, please provide the following information*************1) Organization name, address, email address, UEI and cage code, Web site address, telephone number, and size and type of ownership for the organization, and *************2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. Submit concise responses in the same organized format as below. Identify assumptions and distinguish firm capabilities from proposed alternatives. Partial responses from manufacturers or prospective subcontractors are welcome; clearly identify which portions your firm can support.**************************I. Interest and role Would your firm pursue this revised requirement as a prime contractor, manufacturer supplying a prime, distributor/integrator, or team member? Identify the intended manufacturer and major work allocations, if known. Explain any barriers to submitting an offer, including whether your response depends on finding a teaming partner.*************II. Relevant capability Provide up to three examples of comparable industrial HVPS or rectifier projects, including power/voltage ratings, application, approximate completion date, and your role. Describe experience with pulsed loads, copper-wound transformers, harmonic reduction, controls integration, and liquid cooling. *************III. Technical feasibility Identify requirements that would prevent participation, materially increase cost or lead time, or require an exception. Address the 24-pulse approach or proposed equivalent, output ratings, ambient conditions, cooling capacity and water quality, controls/protocol compatibility, physical fit, and any facility modifications. Describe the specific clarification or performance-based alternative recommended.*************Factory testing and training Describe available test facilities and a practical FAT approach for both ratings. Manufacturing and FAT would occur at the contractor/manufacturer facility. Distinguish full-power tests from separate full-voltage/full-current tests or simulations, and identify limitations in reproducing the installed pulsed load. Recommend measurable acceptance criteria and the equipment or site data needed. Confirm ability to train Government personnel during or immediately after FAT.*************IV. Schedule and capacity Provide a realistic schedule from award through design approval, long-lead procurement, fabrication, FAT, documentation, and delivery of all six units. State whether approximately 12 months is achievable, required Government review durations, current capacity constraints, and whether staggered deliveries would help.*************V. Payment milestones: USACE is considering an approximately 12-month period from award through delivery, subject to validation through market research. The proposed payment milestones are 25 percent upon preliminary design approval, 25 percent following successful FAT for all six units, and 50 percent upon delivery, unloading, Government receipt, and completion of required deliverables. Any financing, payment, inspection, and acceptance provisions will be established by the Contracting Officer in the solicitation. Would the proposed 25/25/50 payment structure support participation? If not, suggest practical milestones or financing arrangements, with approximate percentages and a brief explanation. Identify whether payment only after FAT of all six units creates a material cash-flow constraint. Feedback does not constitute Government approval of a payment or financing arrangement.*************VI. Warranty and Government storage. USACE contemplates a base warranty of at least one year beginning at Government receipt of the delivered equipment, with a separately priced extended-warranty option. The base warranty would not be deferred until future installation or commissioning. Industry feedback is requested on feasibility, standard terms, storage conditions, and the scope and availability of extended coverage. Describe standard warranty commencement, duration, coverage, service response, exclusions, and extended-warranty options. Address feasibility of one year from Government receipt, including equipment stored before installation. Identify preservation, inspection, power, environmental, and recommissioning requirements to maintain coverage and any residual risks.*************VII. Separate future installation Confirm whether removing long-term contractor storage and future installation/commissioning support improves willingness to bid. Identify the technical data and rights or licenses needed for a qualified third party to install and maintain the equipment. Describe availability and customary ordering arrangements for separately acquired future OEM support without requiring a commitment under this procurement.***************************************Additional feedback and company information: *************Competition and acquisition terms Recommend contract packaging, experience requirements, inspection/acceptance terms, or other provisions needed to encourage competition. Identify commercial products or customary commercial practices that could satisfy the requirement. *************Delivery and information needs Identify shipping/unloading constraints and the drawings, site measurements, load profiles, cooling data, controls information, or other Government-furnished information needed to assess feasibility and prepare an offer. State whether an industry discussion or site visit would materially assist. Do not submit a detailed design or binding price proposal.*************USEPA Recovered Materials: Can your firm incorporate recycled content in packaging, crating, or structural enclosures?*************USDA BioPreferred: What is the commercial feasibility of utilizing USDA-certified biobased dielectric fluids, transformer cooling oils, or biobased protective coatings?*************Safety Compliance: Confirm ability to comply with safety standards for high-voltage testing under USACE EM 385-1-1 and NFPA 70E.**************************The Government will evaluate market information to ascertain potential market capacity to: 1) provide the requirement consistent, in scope and scale, with those described in this notice and otherwise anticipated; 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements; and 3) implement a successful project management plan that includes: compliance with tight program schedules; cost containment; meeting and tracking performance; hiring and retention of key personnel and risk mitigation **************************Interested parties are requested to submit a capabilities statement of no more than eight (8) pages in length in Times New Roman font of not less than 10 pitch. Your response to this Sources Sought, including any capabilities statement, shall be electronically in either searchable Microsoft Word or Portable Document Format (PDF), Use the subject line (Sources Sought Response P2 569570 Barrier IIA and IIB HVPS). The deadline for response to this request is no later than 2 pm, Central Time, 4 November 2026. All responses under this Sources Sought Notice must be e-mailed to Points of contact, Kyle Smith (Kyle.D.Smith@usace.army.mil) and Sara King (Sara.T.KIng@usace.army.mil)*************This documentation must address at a minimum the following items:*************1.) What type of work has your company performed in the past in support of the same or similar requirement?*************2.) Can or has your company managed a task of this nature? If so, please provide details.*************3.) Can or has your company managed a team of subcontractors before? If so, provide details, this will assist us in determining subcontracting goals.*************4.) What specific technical skills does your company possess which ensure capability to perform the tasks?*************5.) Provide a statement including current small/large business status and company profile to include number of employees, annual revenue history, office locations, UEI number, etc. The applicable NAICS code for this requirement is 335999 All Other Miscellaneous Electrical Equipment and Component Manufacturing (Size Standard: 600 Employees) or comply with the non-manufacturer rule. The Product Service Code is 6130 Converters, Electrical, Nonrotating. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. *************6.) Respondents to this notice also must indicate whether they qualify as a Small, Small Disadvantaged, Women-Owned, HUBZone, or Service Disabled Veteran-Owned Small Business Concern.*************The estimated period of performance consists of one year manufacture and deliver, plus extended warranty options. Specifics regarding the number of option periods will be provided in the solicitation.*************The contract type is anticipated to be Firm-Fixed Price. *************All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought. | - | Market Research | 11/06/2026 |
SOURCES SOUGHT / REQUEST FOR INFORMATION (RFI) Power Distribution and Illumination Systems, Electrical (PDISE) Issuing Agency: Department of the Army, Army Contracting Command – Aberdeen Proving Ground (ACC-APG), Belvoir Division Portfolio Acquisition Executive (PAE): PAE Agile Sustainment & Ammunition (PAE ASA) Project Manager (PM): PM Expeditionary Energy and Sustainment Systems (PM E2S2) NAICS Code: 335999 (Miscellaneous Electrical Equipment and Component Manufacturing) and 335313 (Switchgear and Switchboard Apparatus Manufacturing) PSC / FSC Code: 6150 (Miscellaneous Electric Power and Distribution Equipment) Classification Code: 61 (Electric wire, and power and distribution equipment) Notice Type: Sources Sought / Request for Information (Market Research under FAR Part 10) 1.0 DISCLAIMER & SPECIAL NOTICES This is a Request for Information (RFI) / Sources Sought Synopsis issued solely for information and planning purposes in accordance with FAR 15.201(e) and FAR Part 10. This notice does not constitute a Request for Proposal (RFP), Invitation for Bid (IFB), or an obligation on the part of the Government to acquire any products or services. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The Government will not pay for information submitted in response to this RFI, nor will it reimburse respondents for any costs incurred in preparing responses. Proprietary information, if any, should be minimized and MUST BE CLEARLY MARKED. All submissions become Government property and will not be returned. 2.0 PROGRAM BACKGROUND & SCOPE The PM E2S2 has a potential requirement for the build-to-print manufacture, assembly, first article inspection, preproduction First Article testing, and delivery of the PDISE family of systems and associated components and packaging. PDISE is a standardized, ruggedized, man-portable family of electrical feeder and distribution equipment that connect mobile power generation equipment and warfighter mission equipment in harsh tactical environments across Multi-Domain Operations (MDO). The PDISE family consists of five Government-owned Technical Data Package (TDP) end-item Configuration Items (CIs) and their associated accessories. For this acquisition, only four of those end-items are required. The M60 A/P Distribution System is not anticipated to be included in this acquisition effort. The following systems will be procured: M200 A/P Feeder System: 3-Phase, 200 Amperes/Phase (MIL-DTL-53126/1; Drawing 13229E6350) (NSN 6150-01-308-5672) M100 A/P Feeder System: 3-Phase, 100 Amperes/Phase (MIL-DTL-53126/2; Drawing 13229E6351) (NSN 6150-01-308-5671) M40 A/P Distribution System: 3-Phase, 40 Amperes/Phase (MIL-DTL-53126/3; Drawing 13229E6353) (NSN 6150-01-307-9446) M46 Utility Assembly: Electrical Receptacles and Illumination Kit (MIL-DTL-53126/5; Drawing 13226E7046) (NSN 6150-01-208-9751) Procurement Baseline: Build-to-print execution using existing Government TDPs, MIL-DTL-53126, and associated specification slash sheets. TDPs for the PDISE systems are available upon request. 3.0 PURPOSE OF THIS RFI The Government seeks to determine: The availability of qualified large and small business sources under NAICS 335999 and 335313 capable of manufacturing, testing, and delivering the PDISE family of systems. Industry capacity and lead times for manufacturing and assembling heavy-duty electrical power-distribution equipment, including Class L connectors, ruggedized cables, military packaging and specialized circuit breakers. Vendor capability to conduct First Article Testing (FAT) and environmental testing per MIL-DTL-53126. Rough Order of Magnitude (ROM) unit cost for each item. The feasibility of small business set-asides (e.g., Total Small Business, 8(a), HUBZone, SDVOSB, or WOSB). 4.0 SPECIFIC INFORMATION REQUESTED (VENDOR QUESTIONNAIRE) Interested vendors are requested to provide clear, detailed responses to the questions below. Generic corporate marketing brochures that do not directly address these technical and manufacturing questions will not be considered. Section A: Corporate & Business Information Company Profile: Provide Company History (years in business), Name, Address, Website, CAGE Code, and Unique Entity Identifier (UEI) under SAM.gov. Business Size Standards: State your business size (number of employees) and socio-economic status under NAICS 335999 and 335313. Specify if your firm is: Large Business Small Business (SB) Small Disadvantaged Business (SDB) / 8(a) Service-Disabled Veteran-Owned Small Business (SDVOSB) Historically Underutilized Business Zone (HUBZone) Woman-Owned Small Business (WOSB / EDWOSB) Role & Teaming Intent: Do you intend to respond to a solicitation as a Prime Contractor, Joint Venture / Teaming Partner, or Subcontractor? If teaming or subcontracting, describe proposed workshare allocations and your strategy to satisfy the Limitations on Subcontracting (FAR 52.219-14). Workload: If your company is awarded the contract, will you be able to perform at least 50% (percent) of the work required in house? Relevant Corporate Experience and Past Performance: Provide up to three examples of recent, relevant efforts involving build-to-print manufacture, inspection, testing, and delivery of ruggedized electrical distribution equipment, cable assemblies, or comparable military hardware. For each example, identify the customer, period of performance, scope, quantities, contract value, and customer point of contact, if available. Limit each past-performance example to two pages. Section B: Build-to-Print Manufacturing & Technical Capabilities TDP & Specification Conformance: PDISE requires fabrication to Government TDPs without redesign. Describe your facility’s experience manufacturing ruggedized power distribution centers, electrical enclosures, and high-power tactical cables to Government drawings (ASME Y14.100 / MIL-STD-31000). Tooling & Production Processes: Describe your capabilities for: Heavy-gauge multi-conductor power cable assembly. Assembly and wiring of circuit breaker inside distribution enclosures. Integration of MIL-DTL-22992 (Class L) heavy-duty cylindrical connectors into enclosures and cabling. Facilities and Production Control: Describe the availability, size, and location of facilities; manufacturing equipment; production capacity; production-control processes; records-management practices; and reporting systems used to support cost, schedule, and performance requirements. Chemical Agent Resistant Coating (CARC): PDISE enclosures require pre-treatment and painting conforming to MIL-DTL-53072 and SAE-AMS-STD-595. Does your facility possess in-house CARC painting capabilities or do you rely on qualified third-party coating vendors? Packaging & Wood Packaging Material (WPM): Can your facility provide military preservation, marking, and crating conforming to Drawings 13230E7021/7020/7019? Manufacturing Readiness Level (MRL): What is your current assessed Manufacturing Readiness Level for this class of tactical electrical distribution hardware? In-Process and Final Inspection: Describe your processes for receiving inspection of components and materials, in-process inspection, final inspection, nonconformance control, and documentation of inspection of completed PDISE or similar end items, as applicable. Section C: First Article Testing (FAT) & Environmental Qualification In-House vs. Subcontracted Testing: PDISE First Article Preproduction Inspection (FAT) requires 2 units per configuration tested within 180–360 Days After Contract Award (DACA). Identify whether your company possesses internal testing facilities or an established relationship with a DoD-certified laboratory to conduct First Article Testing in accordance with MIL-DTL-53126. Failure Escalation & Root Cause Analysis: Describe your engineering experience and/or procedures for performing root cause failure investigations and delivering Failed Item Analysis Reports (FIARs) and Test Incident Reports (TIRs) (DI-MISC-80711). Section D: Quality Management & Configuration Control Quality Certifications: Is your quality management system certified to ISO 9001:2015, AS9100D, or an equivalent standard? Provide certificate numbers and registrar details. Configuration Management System (CMS): The contractor cannot deviate from the TDP without formal Government approval via Engineering Change Proposals (ECPs) or Requests for Variance (RFVs). Describe your formal configuration management process for tracking baseline changes in accordance with MIL-STD-3046 and MIL-HDBK-61. Section E: Supply Chain Resilience, Surge Capacity & Lead Times Long-Lead Material Availability: Certain components (e.g., MIL-DTL-22992 Class L connectors, Mil-Spec lumber, specialized Mil-Spec circuit breakers and cables) historically experience extended lead times. What are your current supplier’s lead times for these or similar critical long-lead items? How does your company mitigate obsolescence and supply chain disruptions? Production Throughput & Surge Capacity: What is your estimated monthly steady-state production throughput for PDISE systems (M200, M100, M40, M46)? What is your maximum surge capacity (percentage increase above steady-state) that could be sustained under Defense Priorities and Allocations System (DPAS) rated orders (e.g., DO/DX ratings)? Army Arsenal Integration (Make-or-Buy): In accordance with the Army Make-or-Buy policy (DI-MGMT-82398), prime contractors must assess manufacturing end-item components within the US Army Arsenal System (e.g., Rock Island Arsenal, Watervliet Arsenal). Does your organization have prior experience partnering with or evaluating Army Arsenals for component production? Section F: Past Performance & Rough Order of Magnitude (ROM) Relevant Experience: Provide up to three (3) examples of contracts completed or performed within the past five (5) years involving the manufacture, testing, or delivery of tactical electrical distribution, high-voltage vehicle power systems, or comparable DoD equipment. Include: Contract Number & Customer / Agency Total Dollar Value Period of Performance Specific Scope Executed (Prime vs. Subcontractor) Lead Time to First Delivery: Provide an estimated timeline (Months After Contract Award) for: First Article Preproduction Unit fabrication (Target: ≤180 DACA) First Article Testing completion and report submittal (Target: ≤360 DACA) Production delivery commencement following FAT approval Section G: ROM PRICING BY QUANTITY RANGE Provide quantity-based, per-unit Rough Order of Magnitude (ROM) pricing for each of the anticipated end items: M200 A/P Electrical Feeder System, M100 A/P Electrical Feeder System, M40 A/P Electrical Distribution System, and M46 Electrical Utility Assembly. Provide ROM pricing for the following quantity ranges: 1–50, 51–100, and 101–200 units. Identify significant pricing assumptions, long-lead material considerations, and any quantity-price breakpoints. 5.0 SUBMISSION INSTRUCTIONS & FORMAT Submission Deadline: 11/20/2026 by 4:00 PM Eastern Time. Page Limit: Responses shall not exceed twenty (20) pages (excluding title page, executive summary, and certs/licenses), 8.5" x 11" paper, font size 12 pt for the body text and 10-11 pt for any text in table or graphics, Times New Roman font, with a minimum of one (1) inch margins all around. File Format: Deliver responses electronically in Adobe PDF or Microsoft Word format. Submission Channel: Submissions must be transmitted via email to the Contract Specialist and Contracting Officer: Contracting Officer: Rosetta Wisdom-Russell- rosetta.wisdom-russell.civ@army.mil Contract Specialist: Thao Trinh - thao.h.trinh.civ@army.mil Subject Line: RFI Response: PDISE Manufacturing Capabilities – [Company Name] 6.0 GOVERNMENT SUMMARY & NEXT STEPS The Government will evaluate market survey responses to determine the acquisition strategy, specifically whether a small business set-aside is warranted under FAR Part 19 or if full-and-open competition is required. Interested vendors are strongly encouraged to register in the System for Award Management (SAM) and ensure active status under NAICS 335999 and 335313. | - | Market Research | 11/20/2026 |
Light commercial baseboard radiation unit and Supply valve Model 185C | - | Combined Synopsis | 10/06/2026 |
Login at https://piee.eb.mil and search for 'W91QVN26QA042' to obtain more details.* | - | Solicitation | 09/16/2026 |
Additional Details
Solicitation Number
W912MM15T0054
Archive Date
Nov 20, 2015