Notice ID: 730f0780deeb44ddbd9755cb6b1e0a00Presolicitation
Cheatham, Nickajack, and Wilson Stoplog Liners and Fillers
Archived on August 27, 2020. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 11:00 AM UTC−05:00
- Posted
- August 11, 2020
- Notice type
- Presolicitation
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 332312: Fabricated Structural Metal Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W072 ENDIST NASHVILLE
- Place of performance
- Ashland City, 37015
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- W912P520B0008
- Notice ID
- 730f0780deeb44ddbd9755cb6b1e0a00
Description
Posting the abstract of bids. PROJECT DESCRIPTION: The Nashville District U.S. Army Corps of Engineers (USACE) anticipates a firm fixed price supply contract for Cheatham, Nickajack, and Wilson Stoplog Liners. This project consists of structural fabrication of steel structures called slot liners and slot fillers. Slot liners are vertical welded structures installed inside lock walls that allow temporary damming structures to be placed across the lock chamber. Slot fillers are box-like welded steel structures that are filled with concrete and are placed in the opening of the slot liners during normal lock operations. The contract requires fabrication of two slot liners and two fillers for Cheatham Lock and Nickajack Lock, and two slot liners for Wilson Lock, for a total of six slot liners and four slot fillers. The slot liners are approximately 27’ tall and weigh approximately 14,700 lbs. The slot fillers are approximately 8’ tall and weigh approximately 16,000 lbs., including the weight of concrete. After fabrication, the structures are required to be blasted to white metal (SSPC SP 5) and painted with the 23-A-Z moisture cure urethane paint system. The fabricator will deliver the slot liners and slot fillers to their designated project (Cheatham Lock located in Ashland City, TN - Nickajack Lock located in Jasper, TN - Wilson Lock located in Florence, AL). The fabricator is required to have one of the following AISC certifications at the time of bidding and throughout the contract period of performance: AISC Certified Metal Hydraulic Fabricator (HYD) ASIC Certified Bridge Fabricator – Simple (SBR) ASIC Certified Bridge Fabricator – Intermediate (IBR) AISC Certified Bridge Fabricator – Advanced (ABR) AISC Certified Building Fabricator/Erector (BU) Welding is required to be performed in accordance with the American Welding Society requirements specified in AWS D1.1. Welders and welding operators shall be qualified appropriately. Welding Procedure Specifications shall be qualified and adhered to. A weld tracking log shall be developed and adhered to. Inspection and Testing shall be performed by appropriately qualified individuals. Additionally, the structures are required to be coated by a qualified painting contractor possessing the appropriate SSPC (QP1, QP2, QP3) certificate or AISC Certification for Sophisticated Paint Endorsement (SP1, SP2, SP3). Qualified paint applicators are also required. It is anticipated that two slot liners and two fillers for Cheatham Lock and Nickajack Lock , and two slot liners for Wilson Lock, for a total of six slot liners and four slot fillers The Contractor shall provide the necessary plant, labor, materials, equipment, and transportation. The plans and technical specifications will be included in solicitation announcement, W912P520B0008. The solicitation is expected to be released on or around June 18, 2020. The Contractor shall be required to (a) commence work under this contract within ten (10) calendar days after the date the Contractor receives the initial notice to proceed, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than March 08, 2021 after receipt of award. The delivery address are for the liners and fillers are: Deliver address for Cheatham Lock 1799 Cheatham Dam Rd Ashland City TN 37015 Deliver address for Nickajack Lock 3490 TVA Road Jasper, Tennessee 37347 Deliver address for Wilson Lock 704 S. Wilson Dam Road Florence, AL 35630
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
Solicitation:
W912P520B0008- Pre-Solicitation
- Solicitation
Formal solicitation typically follows within 30–60 days. (estimate)
- Pre-SolicitationMay 11, 2020
Cheatham, Nickajack, and Wilson Stoplog Liners and Fillers
- 5×SolicitationJun 18, 2020
Cheatham, Nickajack, and Wilson Stoplog Liners and Fillers
- 2×Pre-SolicitationCurrentAug 11, 2020
Cheatham, Nickajack, and Wilson Stoplog Liners and Fillers
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Firm Fixed Priced Competive Contract Awarded | - | Awarded | Open |
The purpose of this amendment is to:1. Update Section C - Technical Specifications Administrative Errors, Pages 26-148.2. Update Section L - Revise the Conditions and Notices to Bidders, Pages 149 - 153.3. Update Section M - Evaluation Factor for Award, Pages 154 - 157.The work includes furnishing all labor, materials, tools, and equipment to complete the work as shown and as specified for the Ensley East Connector Bridge, and incidental related work. The work involves fabrication and delivery to the project site of a new steel East connector Bridge which includes two east connector bridge spans (waterside and landside), middle support float, and middle support fixed based, and parts shipped loose. East connector bridge shall be delivered to Ensley Engineer Yard by water and stored on barges specified by Government. All inquiries regarding this solicitation are to be submitted via ProjNet, https://www.projnet.org/projnet. Telephone and email inquiries will not be accepted. ProjNet is a web-based program that allows Bidder to post questions regarding the solicitation and view all questions by other Bidder and responses by the government. Inquiries must be submitted not later than seven (7) calendar days prior to the proposal due date. Any inquiries submitted within seven calendar days of the proposal due date may not be answered. To submit and review inquiries, Bidder will need to use the inquiry key presented below and follow the instructions listed below the key for access. The Inquiry Key is: CUJM83-ETRURV. | - | Solicitation | 10/16/2026 |
Award Notice Project: Kentucky Lock Upstream Low Speed Gearbox Fabrication | - | Awarded | Open |
System Error - Quotes were due at 16 July 2026 @ 1:00PM CDT. The purpose of this Amendment is to incorporate the following changes: Extend the deadline for receipt of quotes. The closing date and time for submission of quotes is hereby changed from 13 July 2026 to 16 July 2026 at 1:00PM CDT. The U.S. Army Corps of Engineers (USACE), Nashville District (LRN), intends to issue a Request for Quote (RFQ) solicitation for a firm fixed-priced supply contract for the fabrication and delivery of two (2) new, opposite-hand, low-speed gear reducers for the upstream miter gates at Kentucky Lock on the Tennessee River. The delivery must also include the accompanying output pinions and other items as detailed in the contract specifications and drawings. Please note that the installation of the gearboxes is not part of this contract. | - | Solicitation | 07/16/2026 |
The Huntington District Corps of Engineers intends to award a contract for the fabrication of an Auxiliary Chamber Miter Gate for Captain Anthony Meldahl Lock and Dam. The contract will be a Firm Fixed Price Supply Contract. Performance will be the fabrication and delivery of one (1) miter gate two (2) leaves and appurtenant items. The contract will be awarded to the offeror whose proposal conforms to the solicitation and is within a technical/price competitive range, if established, as determined by the contracting officer and has been evaluated as the most advantageous to the Government, all factors considered. All responsive offerors will be evaluated utilizing the following technical factors: Qualifications and Technical Approach, Past Performance, Capabilities and Capacities. Solicitation documents will be available on or about 22 June 2026 online at https://www.sam.gov. To be eligible for contract award, a firm must be registered in the System Award Management (SAM). Register via the SAM website at https://www.sam.gov/portal/public/SAM. Questions may be submitted to Janessa Myers at janessa.k.myers@usace.army.mil. A NAICS Code of 332312 has been established for this solicitation. The size standard is 500. This procurement is a total small business set-aside. | - | Awarded | Open |
Additional Details
Solicitation Number
W912P520B0008
Archive Date
Aug 27, 2020
Office Address
NASHVILLE, TN, 37203-1070