Notice ID: 1e8de58cdda4fa237be1921fd24731e1Solicitation
B--Mitigation testing services Underwater BIP Air Bubble Blast Suppression Curtain.
Archived on July 3, 2009. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 AM UTC−05:00
- Posted
- May 8, 2009
- Notice type
- Solicitation
- NAICS
- 213112: Support Activities for Oil and Gas Operations
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W07V ENDIST ST LOUIS
- Place of performance
- US Army Engineer District, St. Louis ATTN: CEMVS-CT, 1222 Spruce Street St. Louis MO 63103-2833 US
- PSC
- B: SPECIAL STUDIES/ANALYSIS, NOT R&D
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- W912P909R0726
- Notice ID
- 1e8de58cdda4fa237be1921fd24731e1
Description
The US Army Corps of Engineers-St. Louis District intends to solicit for award mitigation testing services of Underwater BIP, utilizing an Air Bubble Blast Suppression Curtain. The objective of this project is to design, test, and collect data on a bubble curtain based blast suppression curtain (BSC) capable of reducing the environmental impacts from Blow in Place (BIP) operations used to detonate unexploded ordnance (UXO) in the marine environment. This is an unrestricted acquisition. NAICS Code 213112 The solicitation is anticipated to be available on or about May 4, 2009 The media selected for issuance of Synopsis/Solicitation and amendments shall solely be at the discretion of the Government. Paper copies of this solicitation and amendment, if any, will not be available or issued. Interested parties may download and print the solicitation at no charge from the following websites: 1. Federal Business Opportunities (FedBizOpps), http://www.fbo.gov 2. US Army Corps of Engineers-St. Louis District http://www.mvs.usace.army.mil/ct/ct.htm 3. Army Single Face to Industry (ASFI) https://acquisition.army.mil/asfi. To keep informed of changes check these sites frequently. Some web enabled contractor tools are as follows: 1. Register to receive Notifications, and 2. Subscribe to the Mailing List for specific solicitations. ADDITIONAL INFORMATION: In accordance with FAR 52.212-1(k), prospective awardee shall be registered and active in the CCR database prior to award. If the offeror does not become registered in the CCR database by the due date/time of quote/proposal, the Contracting Officer will proceed to award to the next otherwise successful registered offeror. Offerors may obtain information on registration at www.ccr.gov or by calling 1-888-227-2423 or 269-961-5757. Requests for solicitation packages made by telephone, fax, or email will not be honored as contractors must download through the above websites The solicitation number for this project is W912P9-09-R-0726. Please refer to that number for all future information related to this project. Questions related to this solicitation should be emailed to frank.j.johnson@usace.army.mil
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Frank J. Johnson, 314-331-8523 US Army Engineer District, St. Louis
Documents
No documents available.
Lifecycle
Solicitation:
W912P909R0726- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- Pre-SolicitationApr 16, 2009
B--Mitigation testing services Underwater BIP Air Bubble Blast Suppression Curtain.
- SolicitationCurrentMay 8, 2009
B--Mitigation testing services Underwater BIP Air Bubble Blast Suppression Curtain.
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
See Amendment and Attachments. | - | Solicitation | 11/06/2026 |
DEPARTMENT OF VETERANS AFFAIRS NETWORK CONTRACTING OFFICE 21 (NCO 21) Description: THIS IS A PRE-SOLICITATION NOTICE FOR A REQUEST FOR QUOTE (RFQ). VA Southern Nevada Health Care System (VASNHCS) has a future need for fuel tank cleaning, inspection, sampling, testing of fuels quality, restoration and fueling of 9 underground diesel fuel tanks for the VA Palo Alto Health Care System (VASNHCS) located at 6900 North Pecos Road, North Las Vegas, NV 89086-4400. Solicitation Number 36C26127Q0089 for this effort will be posted to SAM.GOV (https://sam.gov) on or about October 23, 2026. This solicitation will contain all necessary specifications and information necessary to quote the project. See solicitation for when questions must be submitted. Quotes are tentatively scheduled to be due on November 6, 2026 (see solicitation when available for specific time/date). Point of Contact: Gary Christensen, Contract Specialist, gary.christensen@va.gov. Questions regarding this notice may be submitted via e-mail to gary.christensen@va.gov. | - | Pre-Solicitation | 11/06/2026 |
The Contractor shall provide FJI Diesel fuel, JIS K2204-1997-1-GO, Pour point requirement of a maximum of -2.5 C. | - | Solicitation | 11/13/2026 |
E-Seal Technology from Los Alamos National Laboratory offers a transformative answer to the world’s aging wells. E-Seal is a liquid sealant that flows like water until an applied electric field steers its engineered micelles directly into the sub-millimeter cracks where cement and polymer treatments physically cannot reach, then transforms into a durable, jammed plug that holds even after the power is switched off. With an estimated tenfold cost advantage over current sealants, the ability to mitigate galvanic corrosion of well casings, and an AI-guided control system that adjusts voltage in real time as the seal forms, E-Seal stands as the first intelligent, actively steered wellbore repair platform built for the leak pathways that define modern well failure. Overview E-Seal begins as a low-viscosity, water-like fluid carrying specially engineered surfactant micelles and stabilized colloidal particles. When an electric field is applied across the target zone, three electrokinetic forces act in concert: Electrophoresis pulls the charged micelles toward the fracture, electro-osmosis drives bulk fluid flow into tight constrictions, and dielectrophoresis uses non-uniform field gradients to push larger micelle clusters into the narrowest gaps. As the micelles concentrate inside the crack, the dispersion transitions from a flowing liquid into a jammed, high-viscosity network that bridges the fracture wall-to-wall and resists pressure-driven flow even after the field is removed. Technology Description At the molecular scale, surfactant molecules in the E-Seal fluid self-assemble into micelles above the critical micelle concentration, and cement surfaces in downhole brine naturally develop an electrical double layer that interacts with these approaching charged carriers. In high-salinity brines containing divalent cations such as calcium and magnesium, the double layer compresses, inter-particle repulsion drops and micelles aggregate and adsorb onto the cement face; silica or alumina nanoparticles then reinforce the network as physical anchoring points, producing a mechanically robust plug that maintains low permeability over time. Optional additives further tune the sealant to site conditions. Trivalent cations of lanthanum and cerium raise ionic strength, accelerate micelle aggregation and can react with carbonate species in carbonate-bearing brines to precipitate low-solubility mineral phases as a secondary plugging mechanism. Crosslinked polyacrylamide derivatives, sodium polyacrylate and sulfonated polyacrylamide gel particles also can be incorporated to reinforce the seal through polymer crosslinking or by swelling on contact with the leaking fluid. Layered on top of the chemistry is an AI/ML-based real-time control pipeline that monitors sealing progress and dynamically recommends voltage adjustments as conditions evolve in the wellbore, positioning E-Seal as an actively steered rather than passively injected treatment. The applied potential difference carries a second benefit beyond transport: It helps mitigate galvanic corrosion of the well casing, addressing a long-standing integrity concern in parallel with the primary sealing function. Because the underlying transport mechanism is electrokinetic rather than pressure-driven, the same chemistry is well suited to micron-scale defects in any cementitious, porous or fractured medium, including concrete infrastructure, dams, tunnels, underground vaults, waste containment structures, clay and bentonite engineered barrier systems, repository backfill, corroded metallic interfaces, leaky caprocks, fault damage zones, abandoned mine workings and underground storage caverns. Advantages Reaches sub-millimeter microfractures and microannuli that cement squeeze jobs cannot penetrate because of particle bridging at the fracture mouth Maintains sealing performance under the high temperatures, high pressures, and aggressive brine chemistries where polymer and resin sealants typically break down Delivers an estimated tenfold cost advantage over contemporary sealing approaches Mitigates galvanic corrosion of well casings as a built-in secondary benefit of the applied electric field Uses an AI-guided control system that tracks sealing progress and adjusts voltage dynamically for a smarter, more reliable repair Applies broadly beyond wellbores to concrete, containment, and subsurface infrastructure wherever micron-scale leak paths drive failure Market Applications Oil and Gas Recovery (legacy well plugging and abandonment, sustained casing pressure remediation, methane leak compliance) Geothermal Energy (well integrity repair, asset life extension for high-cost geothermal wells) Carbon Capture (caprock and wellbore integrity for long-term CO2 containment) Critical Infrastructure (dams, tunnels, underground vaults, reservoirs) Mining and Subsurface Storage (abandoned mine workings, underground storage caverns, fault zones) S-197080 U.S. Patent pending LA-UR-26-25954 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | - | Special Notice | 10/01/2026 |
The U.S. Army Corps of Engineers Kansas City District, Operations Division, has a need for riprap rock that shall be from Corps of Engineers approved sources. For the purpose of this specification, a source will refer to a specific bed at a specific quarry location. The rock will be delivered to four (4) sites at Rathbun Lake Project in Centerville, IA. A total of 67,451 Tons is to be delivered. The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary as defined in the Purchase Description, except for those items specified as Government furnished property and services. The Contractor shall perform to the standards in the contract. | - | Combined Synopsis | 07/24/2026 |
Additional Details
Solicitation Number
W912P909R0726
Archive Date
Jul 3, 2009
Office Address
SAINT LOUIS, MO, 63103-2833