Notice ID: 8e74bbffc9a2405093c31460e0d9bcb2Award NoticeAwarded
Building 472 Door and Building 580 Awning, KAFB, New Mexico
Awarded on September 26, 2024. Full description on SAM.gov.
Awarded tounder W912PP24P0034 (source: SAM.gov award notice)• $249.2K
Overview
- Posted
- September 26, 2024
- Notice type
- Award Notice
- Set-aside
- 8(a) Sole Source (FAR 19.8)
- NAICS
- 236220: Commercial and Institutional Building Construction
- Agency
- Department of War
Notice details
- Place of performance
- Kirtland AFB, NM, 87117
- Last updated
- Dec 4, 2025
- Award date
- Sep 26, 2024
- Award amount (SAM.gov award notice)
- $249.2K
Identifiers
- Solicitation number
- W912PP24Q0052
- Notice ID
- 8e74bbffc9a2405093c31460e0d9bcb2
- Award number (PIID)
- W912PP24P0034
Description
This action was awarded as and 8(a) Sole Source Set-Aside under the authority of section 8(a) of the Small Business Act Contractor will install a new door, frame and hardware in Building 472. Contractor to also construct a wall consists of metal studs, gyp board, tape, paint and texture. Contractor will also need to install a new exit sign above the door to include a surface mounted conduit for access control. Contractor will need to construct a new 40'x15' metal awning directly adjacent to the North side of Building 580. Building 472 Door: Contractor to install a door in Building 472 to control access into a corridor and rooms beyond. Scope includes adding a wall across the existing corridor with door. Door must have access control for entry, tied into facilities badging system fire alarm to release door encase of fire. Door must swing in way of egress as noted with arrow on attached plan, ADA accessibility must be maintained to corridor and provide the required push/pull dimensions. New wall and with door must be located 1 -0 east of door fram of room 102 Wall: 3-5/8: 16 ga. Metal studs at 16: on center to a height of below ceiling grid, provide one layer of 5/8: gypsum board each side. Frame out 4 -4 x 7 -2 for new door. Contractor must brace wall to avoid gypsum board, cracking when door closes. Wall must be taped, floated, textured and painted to match existing adjacent walls. Building Facility manager has paint or at least the paint colors to provide to contractor. New exit sign is required and must be mounted on east side of wall. Contractor must frame the new wall to be flush with the existing ceiling grid. Door and Frame: Frame must be commercial grade hollow metal 4;-4 x 7;-2 prepped for electric strike for access control. Factory primed and field painted to match existing door frames. Door must be commercial grade hollow metal 4;-0 x 7;-0 , door must be factor primed field painted to match existing doors, silencers added to frame. Door hardware standard commercial grade hinges per manufacturers recommendations lever handle. Contractor shall provide a new core lock for the door. Access Control: Contractor must provide surface mounted conduit on new wall. Contractor to work with intra-works for the badge reading requirements. Contractor shall pull power to badge reader and exit sign. Contractor must test electric strike release with activation of fire alarm prior to project acceptance. Building 580 Awning: Demolition Contractor must obtain line spots and dig approvals for any soil disturbance and for any footing excavation. New Construction Contractor must install 40' x 15' freestanding steel awning directly adjacent to north side of Building 580. Contractor to provide a 95% and 100% design submittal for review prior to moving forward for construction. The submittal shall consists of Design Drawings, and Structural Calculations (reflected in the Design Analysis) showing the awning will meet the KAFB Design Standards, UFC and Wind Loads. Contractor shall also provide installation specifications. Awning slope should be to center of awning and south to north and be 14' clear at low end and 15' clear at high end. Awning must conform to KAFB design standards and meet KAFB wind load requirements. Contractor must provide all structural analysis for design of uplift due to wind loads of 150 mph. Contractor must provide and install new roof bellows flashing and counter flashing. Bellow flashing must allow for movement due to seismic zone. Contractor must pothole or blue-stake location of sewer line located in mid-section of span to avoid damaging existing sewer line with new footings. Existing transformers exist in vicinity of project and must be protected during construction. Contractor must pothole or blue stake to determine location of underground power line. Contractor must remove existing light pack over existing overhead door and provide and install new low-profile light (with photo-cell to underside of canopy. Contractor must provide and install exterior j-box for new light, all conduit and associated wire. Contractor must tie new light into existing exterior light circuit. Contractor must include a gutter system on the north side of the awning sloping towards center and providing a splash pad to protect the existing slab. Contractor must construct supporting beams in the center of the awning as to not interfere with the existing roll up door on the building. Contractor must construct bollards in front of the north supporting beams of the awning to ensure it is protected from commercial vehicles. Contractor must determine if awning interferes or interacts with any existing lightning protection and include necessary protections for awning.
Award Overview
Award Number
W912PP24P0034
Award Amount (SAM.gov award notice)
$249.2K
Award Date
Sep 26, 2024
Awardee
Awardee UEI
E5MNYJ7TK8R6
Awardee CAGE Code
31DC8
Original Solicitation
Notice ID: 8e74bbffc9a2405093c31460e0d9bcb2
Posted Date: Sep 26, 2024
Original Response Deadline: Not specified
More From This Vendor
Top 5 most recent
- $225.1KSigned Dec 9, 2025
- $225.1KSigned Sep 2, 2025
- $101.4KSigned May 29, 2025
- $1.7MSigned May 20, 2025
- $166.4KSigned Mar 28, 2025
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W912PP24Q0052- Awarded
This opportunity has been awarded.
- AwardedCurrentSep 26, 2024
Building 472 Door and Building 580 Awning, KAFB, New Mexico
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
SOURCES SOUGHT For W912PP27RA003 - DESIGN BID BUILD FY26 SPACE RAPIDS CAPABILITIES OFFICE, KIRTLAND AIR FORCE BASE, BERNALILLO COUNTY, NEW MEXICOThis is a SOURCES SOUGHT announcement; a market survey for information only, to be used for preliminary planning purposes. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT WILL BE AWARDED FROM THIS SOURCES SOUGHT. No reimbursement will be made for any costs associated with providing information in response to this notice or any follow up information requests. The U.S. Army Corps of Engineers (USACE) Albuquerque District has been tasked to solicit for and award Space Rapids Capabilities Office at Kirtland Air Force Base, New Mexico for Kirtland Air Force Base. The proposed project will be a competitive, firm-fixed-price, design-bid-build contract procured in accordance with Revolutionary FAR Overhaul (RFO) 15, Contracting by Negotiation, using a Best Value process, however, the results and analysis of the market research will finalize the determination of procurement method. The type of set-aside decision to be issued will depend upon the responses to this sources sought.PURPOSE OF SOURCES SOUGHTThe purpose of this sources sought is to gain knowledge of interest, capabilities and qualifications of various members of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), Woman-Owned Small Business (WOSB), Economically Disadvantaged Woman-Owned Small Business (EDWOSB) and Service-Disabled Veteran-Owned Small Business (SDVOSB). The Government must ensure there is adequate competition among the potential pool of responsible contractors. PROJECT DESCRIPTION AND EXPERIENCE REQUIREMENTSThe Government is seeking qualified, experienced sources capable of constructing a 67,833 SF, two-story facility to house controlled office space necessary for the operation of military, civilian, and contractor personnel, to include parking and infrastructure (heating and cooling, power, water, sanitation, communications). Construction includes reinforced foundations, floors, two-story steel structure, a combination of metal stud framing with insulated metal panels and metal stud framing with precast concrete panels and low-slope single-ply membrane roof system. Due to soil conditions and the sensitive nature of the building and equipment, over-excavation and special foundations may be required. Facility requires controlled space, controlled network and accreditation, with necessary physical and electronic security measures and compartmented workspaces for 10-15 teams. Facility to include a 200-seat controlled space auditorium. Project includes site preparation, seismic provisions, communications support, secure communications trench, plumbing, electrical, gas, heating/cooling, fire protection systems, landscaping, parking, storm drainage, entry and access control and all other supporting work necessary for a complete and usable facility. This project will comply with Department of Defense antiterrorism/force protection requirements per Unified Facilities Criteria 4-010-01. Facilities will be designed as permanent construction in accordance with Department of Defense Unified Facilities Criteria 1-200-01, General Building requirements. The estimated construction price range for this project is: Between $50,000,000 and $100,000,000.The minimum/special capabilities required for this project are: --Prime Contractor experience with constructing spaces to meet ICD 705 and AV/ESS requirements.--Prime Contractor experience with the Design-Bid-Build process--Prime Contractor experience providing facilities that meet Federal Antiterrorism and Force Protection Requirements including physical security design and construction provisionsThe North American Industry Classification System code for this procurement is 236220 which has a small business size standard of $45 Million. Small Businesses are reminded under FAR 52.219-14 DEV, Limitations on Subcontracting that they must perform at least 15% of the cost of the contract, not including the cost of materials, with their own employees, or similarly situated entities for general construction-type procurement. 8(a) firms are reminded they need to have a bonafide office in the area to where the work is to be performed should the acquisition be set-aside for the 8(a) program.Prior Government contract work is not required for submitting a response under this sources sought synopsis.Anticipated solicitation issuance date for the solicitation is on or about 22 Apr 2027. The official presolicitation notice citing the solicitation number will be issued on SAM.gov inviting firms to register electronically to receive a copy of the solicitation when it is issued.INSTRUCTIONS ON SUBMISSION OF RESPONSES TO THIS SOURCES SOUGHTFirms response to this Sources Sought shall be limited to 10 pages and shall include the following information:1. Firms name, address, point of contact, phone number, e-mail address, UEI, CAGE, and website (if applicable).2. Firms Business Size LB, SB, 8(a), HUBZone, SDVOSB, EWOSB,3. Provide a list of at least three examples of same or similar work performed by your firm in the past 5 years of same or similar size, scope, magnitude and complexity as the subject project.a. Provide a brief description of the project, contract type, contract number, technical description, dollar value of the project, period of performance, customer name along with the current point of contact, telephone number and email, whether your firm worked as a prime or subcontractor, as part of a teaming partner, JV partner, or Mentor/Prot g program. If your firm was a subcontractor indicate your role in the project and the dollar value of the portion performed. 4. Firms experience with the minimum capabilities listed in this Sources Sought Notice. 5. Do you intend to have partners represented in the response? This includes, but is not limited to, existing joint venture partners, potential teaming partners, prime contractor (if responder is potential subcontractor), or subcontractors (if responder is potential prime contractor). If yes, please describe the partner and the expected relationship with respect to this activity.6. What is your companys current Cybersecurity Maturity Model Certification (CMMC) certification status (https://dodcio.defense.gov/CMMC/) or timeline to obtain required level? While the current requirement is Level 1 - Self, the standard may change before releasing the final solicitation.7. Firms Bonding Capability (construction bonding level per contract and aggregate construction bonding level, both expressed in dollars). Indicate whether the firm can bond to the estimated construction price range of this project.PROJECT LABOR AGREEMENTAdditionally, the Corps of Engineers Albuquerque District is soliciting comments from the construction community addressing the potential use of Project Labor Agreements (PLA) from large scale construction projects (exceeding $25 million) within the Albuquerque District area of responsibility. A PLA is defined as a prehire collective bargaining agreement with one or more labor organizations that establishes the terms and conditions of employment for a specific construction project and is an agreement described in 29 U.S.C. 158(f). Federal Acquisition Regulation (FAR) Policy: (a) Project Labor Agreement (PLA) is a tool that agencies may use to promote economy and efficiency in Federal procurement. Pursuant to Executive Order 13502, agencies are encouraged to consider requiring the use of project labor agreements in connection with large-scale construction projects. (b) An agency may, if appropriate, require that every contractor and subcontractor engaged in construction on the project agree, for that project, to negotiate or become a party to a project labor agreement with one or more labor organizations if the agency decides that the use of project labor agreements will (1) Advance the Federal Governments interest in achieving economy and efficiency in Federal procurement, producing labor-management stability, and ensuring compliance with laws and regulations governing safety and health, equal employment opportunity, labor and employment standards, and other matters; and (2) Be consistent with law. Reference: Provision: 52.222-33 Notice of Requirement for Project Labor Agreement Clause 52.222-34 Project Labor Agreement.Please respond to the following questions:1) Should PLAs be executed on selected large dollar contracts in Albuquerque District Area?2) Do you have knowledge that a PLA has been used in the local area on projects of this kind? If so, please provide supporting documentation.3) Are you aware of skilled labor shortages in the area for those crafts that will be needed to complete the referenced project? If so, please elaborate and provide supporting documentation where possible.4) Would a PLA benefit a project which contains a unique and compelling mission-critical schedule?5) Are you aware of time sensitive issues/scheduling requirements that would affect the rate at which the referenced project should be completed? If so, please elaborate and provide supporting documentation where possible.6) Identify specific reasons why or how you believe a PLA would advance the Federal Governments interest in achieving economy and efficiency in federal procurement.7) Identify specific reasons why you do not believe a PLA would advance the Federal Governments interest in achieving economy and efficiency in federal procurement.8) Identify any additional information you believe should be considered on the use of a PLA on the referenced project.9) Identify any additional information you believe should be considered on the non-use of a PLA on the referenced project.10) What other factors should the Corps consider before deciding to include PLA provisions in a U.S. Army Corps of Engineers, Albuquerque District contract?Procurement Integrated Enterprise Environment (PIEE)All prospective Offerors and their Subcontractors must be registered in the System for Award Management (SAM - www.SAM.gov) and the PIEE website to be able to download solicitation information.Solicitation documents, plans, and specifications are only available to be download from PIEE, which may be accessed at https://wawf.eb.mil OR https://piee.eb.mil OR https://piee.eb.mil/xhtml/unauth/home/login.xhtml.Registration should be completed one (1) week prior to the anticipated solicitation release date. USACE will not notify Offerors of any changes to the solicitation; Offerors must monitor PIEE and SAM for the solicitation to be posted, and for any posted changes or amendments.Copies of the solicitation and the solicited plans and specifications will be made available for inspection without charge after the solicitation is released, when accessed through PIEE. Cybersecurity Maturity Model Certification (CMMC)Please review the SAM.gov Special Notice on Cybersecurity Maturity Model Certification (CMMC) Program Implementation UPDATE #3, https://sam.gov/opp/0dbdfee53a8d498a9fff3cd385fb0358/view. At this time Contractors should ensure they are registered in the Procurement Integrated Enterprise Environment (PIEE) in order to access the Supplier Performance Risk System (SPRS) module to post a current self-assessment score.Interested Firms shall respond to this Sources Sought Notice no later than 5 NOVEMBER 2026, 2:00PM MST. All interested firms must be registered in SAM to be eligible for award of Government contracts. Email your response to Karen Irving at karen.k.irving@usace.army.mil. Firms responding to this sources sought notice who fail to provide ALL of the required information requested will not be used to assist the Government in the acquisition decision, which is the intent of this sources sought notice.If inadequate responses are received, this solicitation may be issued for full and open competition. | - | Market Research | 11/05/2026 |
ADDITION TO SEMI-CONDUCTOR TEST LAB, WHITE SANDS MISSILE RANGE, DONA ANA COUNTY, NEW MEXICO | - | Solicitation | 04/30/2026 |
DESIGN BID BUILD INTEGRATED TRAINING COMPLEX FOR THE FEDERAL LAW ENFORCEMENT TRAINING CENTER, ARTESIA, NEW MEXICO | - | Market Research | 04/22/2026 |
| - | Pre-Solicitation | Open | |
Login at https://piee.eb.mil and search for 'W9126G26RA036' to obtain more details.* | - | Solicitation | 07/09/2026 |
Additional Details
Solicitation Number
W912PP24Q0052
Archive Date
Oct 11, 2024
Office Address
ALBUQUERQUE, NM, 87109-3435