Olmsted Lock and Dam Access Road 53 Repairs
Archived on May 7, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 1:00 PM EDT
- Posted
- April 16, 2026
- Notice type
- Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 237990: Other Heavy and Civil Engineering Construction
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION GREAT LAKES AND OHIO.ENDIST LOUISVILLE.W072 ENDIST LOUISVILLE
- Place of performance
- Olmsted Locks and Dam637 New Dam RoadOlmsted, IL 62970, Olmsted, Illinois, 62970
- Last updated
- Nov 1, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W912QR-60440629
- Notice ID
- f664e3c8f2bc4ded8dd07bd4038ef345
Description
ONLY OPEN TO MATOC POOL W9123723D0003 THROUGH W9123723D0007 FOR SMALL BUSINESS SET-ASIDE
With this Request for Proposal (RFP), the Contractor shall furnish all necessary management, personnel, materials, supplies, tools, equipment, fuel, and vehicles, except as otherwise provided herein, required to provide roadway surface repairs and construct new headwalls, wingwalls and a culvert replacement for Access Road 53 at the Olmsted Locks and Dam located at Olmsted, Illinois, as specified and in strict accordance with all Terms, Conditions, General, Specific and Technical Provisions, Drawings, Attachments, Exhibits, etc., contained herein or incorporated by reference. The Contractors work and responsibility shall include all planning, programming, administration, management, supervision, communications and inspection necessary to assure that all services are conducted in accordance with the contract requirements and all applicable Federal, State and local laws and regulations. The Contractor is required to attend a pre-performance meeting to be scheduled by the Technical Point of Contact (TPOC).
LOCATION:
Olmsted Locks and Dam
637 New Dam RoadOlmsted, IL 62970
This procurement is 100% set-aside for Small Business on MATOC Contracts W9123723D0003 through W9123723D0007, NAICS 237990 (Size Standard: $45 Million).
Method of Payment under this contract will be Electronic Funds Transfer (EFT) to a commercial bank account specified by the contractor.
One award will be made from this Solicitation. The contract award will be based on Lowest Price to the Government.
The solicitation will be available on the web only. Faxed, telephoned, or mailed requests for this solicitation will not be honored. To download the solicitation for this project, contractors are required to register at the Federal Contract Opportunities website at SAM.gov.
Technical questions pertaining to this project shall be posted to ProjNet per the instructions incorporated into the solicitation. Contractors are NOT to contact the Technical Point of Contact(s) (TPOCs) listed about the solicitation until an award has been made.
No site visit will be held for this project. Please refer to the attached specifications, drawings, and pictures included in the Request for Proposal (RFP).
Proposals will not be accepted for quantities less than the quantities specified in the price breakout schedule. Failure to submit a fully completed price breakout schedule with a unit price and total cost for all items listed will be considered as a material deviation from the requirements of the RFP and the proposal will be rejected.
Proposals are due on 10 April 2026 at 01:00 PM Eastern Time. All proposals shall be submitted through PIEE per the instructions incorporated into the solicitation. Fax, telephoned, or mailed submittals will not be accepted.
***** Amendment 0001 *****
The price break out schedule was omitted from the original Request for Proposal (RFP) and has been included.
***** Amendment 0001 *****
***** Amendment 0002 *****
Due to clerical error, Geiger Brothers, INC was not included in original RFP. New Due Date is 13 April 2026.
***** Amendment 0002 *****
***** Amendment 0003 *****
Revised Specifications and Statement of Work are attached. See the Summary of Changes section of the RFP letter.
New due date for proposals is 17 April 2026 at 1:00 PM EDT.
To clarify from previous amendment letters, Performance and Payment Bonds will be required. Bid Bonds will NOT be required.
ProjNet has been extended to 12 April 2026. Reminder that all RFP and Amendment letters must be acknowledged with proposal.
*****Amendment 0003 *****
***** Amendment 0004 *****
Revised Specifications are attached. See the Summary of Changes section of the RFP letter.
ProjNet has been reopened and extended to 20 April 2026. See the attached ProjNet Instructions for the updated timeframe on responses before proposals are due.
New due date for proposals is 22 April 2026 at 1:00 PM EDT.
Two (2) questions were received after ProjNet had closed. After review, the Government has decided to accept these questions and answers are provided within this Amendment 0004. Please see the attached sheet titled, Additional Questions from Contractors after ProjNet Closed.
***** Amendment 0004 *****
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (8)
- Download
W912QR-60440629_Specs-0004.pdf
764 KBAdded in Solicitation version 11Posted - Download
W912QR-60440629_Plans-0004.pdf
1.0 MBAdded in Solicitation version 11Posted - Download
W912QR-60440629_Specs-0003.pdf
1.0 MBAdded in Solicitation version 7Posted - Download
W912QR-60440629_Plans-0003.pdf
15 MBAdded in Solicitation version 7Posted - Download
W912QR-60440629-Amendment 0002__.pdf
765 KBAdded in Solicitation version 6Posted - Download
W912QR-60440629 Amendment 0001.pdf
1.0 MBAdded in Solicitation version 4Posted - Download
W912QR-60440629_Plans-0000.pdf
12 MBAdded in Solicitation version 2Posted - Download
W912QR-60440629_Specs-0000.pdf
11 MBAdded in Solicitation version 2Posted
Links (4)
- PIEE Solicitation Module Link for W912QR-60440629piee.eb.milPosted
- Web Based Training for the PIEE Solicitation Modulepieetraining.eb.milPosted
- Registration Instructions for the PIEE Solicitation Modulewww.acq.osd.milPosted
- Department of Defense Procurement Toolboxdodprocurementtoolbox.comPosted
Lifecycle
- 1Version 1SolicitationArchived
Olmsted Lock and Dam Access Road 53 Repairs
- 2Version 2SolicitationArchived
Olmsted Lock and Dam Access Road 53 Repairs - ***ONLY MATOC POOL W9123723D0004 - D0007***
- 3Version 3SolicitationArchived
Olmsted Lock and Dam Access Road 53 Repairs
- 4Version 4SolicitationArchived
Olmsted Lock and Dam Access Road 53 Repairs
- 5Version 5SolicitationArchived
Olmsted Lock and Dam Access Road 53 Repairs
- 6Version 6SolicitationArchived
Olmsted Lock and Dam Access Road 53 Repairs *****ONLY OPEN TO MATOC POOL W9123723D0003 THROUGH W9123723D0007 FOR SMALL BUSINESS SET-ASIDE*****
- 7Version 7SolicitationArchived
Olmsted Lock and Dam Access Road 53 Repairs *****ONLY OPEN TO MATOC POOL W9123723D0003 THROUGH W9123723D0007 FOR SMALL BUSINESS SET-ASIDE*****
- 8Version 8SolicitationArchived
Olmsted Lock and Dam Access Road 53 Repairs *****ONLY OPEN TO MATOC POOL W9123723D0003 THROUGH W9123723D0007 FOR SMALL BUSINESS SET-ASIDE*****
- 9Version 9SolicitationArchived
Olmsted Lock and Dam Access Road 53 Repairs
- 11Version 11SolicitationArchivedCurrent
Olmsted Lock and Dam Access Road 53 Repairs
- 13Version 13Award NoticeArchived
Type changed from Solicitation to Award Notice
***MATOC POOL ONLY - W9123723D0003 THROUGH W9123723D0007***Olmsted Lock and Dam Access Road 53 Repairs
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Dashields Locks and Dam Install 4 Corner Hydraulics Dashields Locks and Dam, Coraopolis, PennsylvaniaThe Dashields hydraulic system upgrade consists of demolition and removal of the existing hydraulic system and its related components, and installation of a new hydraulic system with supporting controls and buildings.Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping and pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete must be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Nine (9) new hydraulic cylinders must be furnished by the contractor and five (5) will be furnished by the government. Electrical demolition work must include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work must be required for placement of new buildings and routing of new electrical cable and mechanical pipe.Three (3) new hydraulic power units (HPUs) must be furnished and installed on the land and middle lock walls inside two new 2-story HPU buildings at locations specified on the contract drawings. The fourth HPU will be furnished and installed on an elevated platform in the river wall at the location specified in the contract drawings. The HPU buildings and elevated platform must be designed and constructed by the contractor in accordance with the performance specification and the concept drawings included in the contract drawings. The HPUs must send hydraulic power to the existing hydraulic cylinders by means of new stainless-steel piping and new manifold mounted hydraulic components.The new hydraulic equipment must be operated by new electronic controls that will be installed inside new panels and new control consoles. The new control panels must be installed on each HPU with an additional control panel inside of the middle wall operations building. The new control consoles must be installed inside three existing and one new 1-story control shelter at locations specified in the contract drawings. The control shelter must be designed and constructed by the contractor in accordance with the performance specification and the concept drawings included in the contractdrawings.New buckets and supporting equipment must be installed inside existing motor control centers (MCCs). New hardware and power and control cabling must be installed as specified and as required for operation of the new electrical/mechanical equipment. Some concrete installation work must be required for placement of new buildings and routing of new electrical cable and mechanical pipe. A geotechnical and civil site analysis must be completed to confirm the structural integrity of all foundations for all new project components and to confirm proper drainage. Minimal new steel grating must be required for placement over top new concrete utility trenches. All new hydraulic and controls equipment must be tested and commissioned prior to project handoff. This project is to be completed at a locks and dam site along the Ohio River and thus requires the use of a floating work plant and work boat(s) for construction. Also, all as-built drawings must be stamped by a registered PE.The work shall be completed within 730 after written Notice to Proceed.The acquisition will be procured as 100% Set-Aside for Small Business. The resulting award will be for one (1) Firm-Fixed-Price (FFP) Contract. All responsible Offerors are encouraged to participate. The Request for Proposal (RFP) will be issued on or about 18 June 2026, online through Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov; therefore, requests for hardcopies of the solicitation will not be honored.The North American Industrial Classification System (NAICS) Code for this acquisition is 237990 - 0ther Heavy and Civil Engineering Construction.The Small Business Size Standard for this NAICS Code is $45,000,000.00.In order to submit an Offer on this project, your company must-1) Be registered in System for Award Management (SAM) and maintain an active registration status. 2) Be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER Manger role. System for Award Management (SAM) RegistrationRegistering in SAM.gov includes both entity validation and entity registration.To register in SAM:a. Navigate to SAM.govb. Select Sign-In (top right)c. Select Create an Account then Follow the Instructions. d. After Account is Set-up, Select Sign In.e. Under the Entity Management widget, Select Get Started button. f. Select Register Entity. As part of entity registration, a Unique Entity ID will be assigned.For Additional Information on SAMTo Register Your Entity (company), please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index . Here you will find the following, Get Started with Your Registration Check Registration Status ACTIVE, INACTIVE, PENDING Update Your Registration Become an Entity Administrator Validate Your Entity *Access User Guides *By selecting this option, you can obtain a Quick Start Guide for Contract Registrations.Also, here you will find in addition to the User Guides - FAQs, Videos, and Definitions.PLEASE NOTEIt is mandatory that all companies be registered in SAM in order to receive federal contracts.There is no charge to register or maintain your company (entity) registration.Login.gov manages usernames and passwords for SAM.gov. *Important* Registration InformationRegistration can take at least ten (10) business days to be active in SAM.gov.Registration must be in active status upon offer submission and remain active during award period.Registration must be renewed every 365 days to remain active.The Federal Service Desk (FSD) for SAM questions, may be contacted. Phone Number: 866-606-8220Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ETProcurement Integrated Enterprise Environment (PIEE) Solicitation Module RegistrationTo register for PIEE follow the below instructions. Register in PIEE:a. Navigate to https://piee.eb.mil/b. Select Register [top right]c. Select Vendord. Create a User ID and Password and follow the prompts [next]e. Create Security Questions [next]f. Complete your User Profile Information [next]g. Complete your Supervisor or Approving Official Information [next]h. Complete Rolesi. Step 1. Select SOL-Solicitationii. Step 2. Select Proposal Manageriii. Step 3. Click Add Rolesiv. Step 4. Fill in your Location Code (CAGE Code) [next]i. Provide a justification for your registration [next]j. Follow the remaining prompts to submit your registrationThe Procurement Integrated Enterprise Environment (PIEE) help desk may be reached by calling telephone number 866-618-5988 for assistance. 30 June 2026 - Amendment 0001 issued. 23 July 2026 - Amendment 0002 Issued 31 July 2026 - Amendment 0003 issued. 13 August 2026 - Amendment 0004 issued. | 59% | Solicitation | 08/20/2026 |
Dashields Locks and Dam Install 4 Corner Hydraulics Dashields Locks and Dam, Coraopolis, PennsylvaniaThe Dashields hydraulic system upgrade consists of demolition and removal of the existing hydraulic system and its related components, and installation of a new hydraulic system with supporting controls and buildings.Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping and pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete must be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Nine (9) new hydraulic cylinders must be furnished by the contractor and five (5) will be furnished by the government. Electrical demolition work must include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work must be required for placement of new buildings and routing of new electrical cable and mechanical pipe.Three (3) new hydraulic power units (HPUs) must be furnished and installed on the land and middle lock walls inside two new 2-story HPU buildings at locations specified on the contract drawings. The fourth HPU will be furnished and installed on an elevated platform in the river wall at the location specified in the contract drawings. The HPU buildings and elevated platform must be designed and constructed by the contractor in accordance with the performance specification and the concept drawings included in the contract drawings. The HPUs must send hydraulic power to the existing hydraulic cylinders by means of new stainless-steel piping and new manifold mounted hydraulic components.The new hydraulic equipment must be operated by new electronic controls that will be installed inside new panels and new control consoles. The new control panels must be installed on each HPU with an additional control panel inside of the middle wall operations building. The new control consoles must be installed inside three existing and one new 1-story control shelter at locations specified in the contract drawings. The control shelter must be designed and constructed by the contractor in accordance with the performance specification and the concept drawings included in the contractdrawings.New buckets and supporting equipment must be installed inside existing motor control centers (MCCs). New hardware and power and control cabling must be installed as specified and as required for operation of the new electrical/mechanical equipment. Some concrete installation work must be required for placement of new buildings and routing of new electrical cable and mechanical pipe. A geotechnical and civil site analysis must be completed to confirm the structural integrity of all foundations for all new project components and to confirm proper drainage. Minimal new steel grating must be required for placement over top new concrete utility trenches. All new hydraulic and controls equipment must be tested and commissioned prior to project handoff. This project is to be completed at a locks and dam site along the Ohio River and thus requires the use of a floating work plant and work boat(s) for construction. Also, all as-built drawings must be stamped by a registered PE.The work shall be completed within 730 after written Notice to Proceed.The acquisition will be procured as 100% Set-Aside for Small Business. The resulting award will be for one (1) Firm-Fixed-Price (FFP) Contract. All responsible Offerors are encouraged to participate. The Request for Proposal (RFP) will be issued on or about 18 June 2026, online through Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov; therefore, requests for hardcopies of the solicitation will not be honored.The North American Industrial Classification System (NAICS) Code for this acquisition is 237990 - 0ther Heavy and Civil Engineering Construction.The Small Business Size Standard for this NAICS Code is $45,000,000.00.In order to submit an Offer on this project, your company must-1) Be registered in System for Award Management (SAM) and maintain an active registration status. 2) Be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER Manger role. System for Award Management (SAM) RegistrationRegistering in SAM.gov includes both entity validation and entity registration.To register in SAM:a. Navigate to SAM.govb. Select Sign-In (top right)c. Select Create an Account then Follow the Instructions. d. After Account is Set-up, Select Sign In.e. Under the Entity Management widget, Select ?Get Started? button. f. Select Register Entity. As part of entity registration, a Unique Entity ID will be assigned.For Additional Information on SAMTo Register Your Entity (company), please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index . Here you will find the following, Get Started with Your Registration Check Registration Status ? ACTIVE, INACTIVE, PENDING Update Your Registration Become an Entity Administrator Validate Your Entity *Access User Guides *By selecting this option, you can obtain a Quick Start Guide for Contract Registrations.Also, here you will find in addition to the User Guides - FAQs, Videos, and Definitions.PLEASE NOTEIt is mandatory that all companies be registered in SAM in order to receive federal contracts.There is no charge to register or maintain your company (entity) registration.Login.gov manages usernames and passwords for SAM.gov. *Important* Registration InformationRegistration can take at least ten (10) business days to be active in SAM.gov.Registration must be in active status upon offer submission and remain active during award period.Registration must be renewed every 365 days to remain active.The Federal Service Desk (FSD) for SAM questions, may be contacted. Phone Number: 866-606-8220Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ETProcurement Integrated Enterprise Environment (PIEE) Solicitation Module RegistrationTo register for PIEE follow the below instructions. Register in PIEE:a. Navigate to https://piee.eb.mil/b. Select Register [top right]c. Select Vendord. Create a User ID and Password and follow the prompts [next]e. Create Security Questions [next]f. Complete your User Profile Information [next]g. Complete your Supervisor or Approving Official Information [next]h. Complete Rolesi. Step 1. Select SOL-Solicitationii. Step 2. Select Proposal Manageriii. Step 3. Click Add Rolesiv. Step 4. Fill in your Location Code (CAGE Code) [next]i. Provide a justification for your registration [next]j. Follow the remaining prompts to submit your registrationThe Procurement Integrated Enterprise Environment (PIEE) help desk may be reached by calling telephone number 866-618-5988 for assistance. | 59% | Pre-Solicitation | 06/18/2026 |
AWARD NOTICE: INVITATION FOR BID W9126G26BA010 for Joe Pool Dam Slide Repair at Joe Pool Lake, Texas. This announcement is a competitive small business set aside, firm-fixed price, Joe Pool Dam Slide Repair civil works construction services at Joe Pool Lake, Texas. The North American Industry Classification System code (NAICS) for this procurement is 237990-Other Heavy and Civil Engineering Construction which has a small business size standard of $45 Million. The Product Service Code is Z2PC-Repair or Alteration of Dams. Project Scope: The contractor shall repair four shallow slides (Slides 18, 20, 21, and 28) on the upstream and downstream dam embankment slopes. Work includes the removal of slide debris; excavation of the slide area with bench-cutting into the stable embankment and a keyway into the foundation toe; lime-treatment of excavated soil; placement and compaction of treated soil to restore original design contours; and final surface restoration with riprap on the upstream slope and topsoil with vegetation on the downstream slope. | 57% | Awarded | Open |
A site visit has been scheduled for 27 JULY 2026 at 1530 EDT. The location of the site visit will be Black Rock Lock at U.S. Army Corps of Engineers. For driving GPS location, use this address: 62 Dann Street, Buffalo, NY 14217. This posting is an Invitation for Bid (IFB) for a contract with the U.S. Army Corps of Engineers, Buffalo District, for the performance of required repairs to the Black Rock Lock (BRL) in Buffalo, NY. Damages were caused by an oversized vessel entering the BRL and contacting the structure. Contact was with an operating gate emergency egress ladder and fendering in multiple areas. These damages present potential for hazard to navigation and must be repaired. All work and materials must meet the references listed in Section 3 of the Statement of Work. The North American Industrial Classification System Code (NAICS) for this effort is 237990 -Other Heavy and Civil Engineering Construction. This will be a 100% Small Business Set-Aside competitive procurement. Please be advised that this requirement may be delayed, revised, or cancelled at any time before award. SOLICITATION WEBSITE: The official solicitation and any subsequent amendments or updates, when posted, will be available free of charge by electronic posting only and may be found at Procurement Integrated Enterprise Environment (PIEE), https://piee.eb.mil/. Paper copies of the solicitation will not be issued. Telephone and Fax requests for this solicitation will not be honored. Project files are Portable Document Format (PDF) files and can be viewed, using Adobe Acrobat Reader. To download the solicitation for this project, contractors are required to register at the Procurement Integrated Enterprise Environment (PIEE) website at https://piee.eb.mil/. Solicitation Amendments, if/when issued, will be posted to the above referenced website for electronic downloading. This will be the only method of distributing the solicitation and any amendments by the Government prior to closing. It is the Offerors responsibility to monitor the website for any amendments or changes to the solicitation. REGISTRATIONS: Offerors shall have and shall maintain an active registration in the following database: System for Award Management (SAM): Offerors shall have and shall maintain an active registration in the SAM database at http://www.sam.gov to be eligible for a Government contract award. If the Offeror is a Joint Venture (JV), the JV entity shall have valid SAM registration in the SAM database representing the JV as one business/firm/entity. If at the time of award an Offeror is not actively and successfully registered in the SAM database, the Government reserves the right to award to the next prospective Offeror. INQUIRIES: Technical inquiries and questions relating to this solicitation are to be submitted via Bidder Inquiry in ProjNet at http://www.ProjNet.org/ProjNet. As noted, offerors shall NOT submit their proposals via ProjNet. Offerors shall submit their proposals in accordance with the provisions stated in the solicitation. To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into system. The Solicitation Number is: W912P426BA012 The Bidder Inquiry Key is: Z7B94J-TDS4K6. Detailed instructions on accessing ProjNet can be found on page 12 of the solicitation. | 57% | Solicitation | 07/29/2026 |
This is a SOURCES SOUGHT SYNOPSIS and is not a solicitation announcement. The purpose of this Market Research and Sources Sought Notice is to gain knowledge of potential qualified Small Business, HUBZone, 8(a), Service Disabled Veteran owned, and Women owned Small Business firms. Responses to this Sources Sought Synopsis will be used by the government in making appropriate acquisition decisions. The intended work falls under NAICS code 237990, Other Heavy and Civil Engineering Construction. The U.S. Army Corps of Engineers, Mobile District, anticipates a requirement for a firm-fixed-price construction contract to perform structural concrete and gate repairs on the spillway at the Carters Reregulation Dam located in Chatsworth, Georgia. The purpose of this project is to perform concrete rehabilitation and retrofit existing structural elements that have been impacted by concrete expansion due to Alkali-Silica Reactivity (ASR). The scope of work includes, but is not limited to: structural concrete demolition of existing pier stoplog slots; installation of new steel stoplog guides and embedded seal plates; placement of specialized shrinkage-compensating concrete; and recessing of side seal plates. Additional mechanical and structural work includes replacing side and bottom seals on four (4) Tainter gates and replacing seals on eight (8) stop logs. The contractor will be fully responsible for the design, fabrication, and installation of Temporary Dewatering Structures (TDS)/cofferdams and temporary gate support shoring. To maintain operational continuity, construction must be executed sequentially, allowing only one gate bay to be dewatered and out of service at any given time. The estimated magnitude of construction is between $5,000,000 and $10,000,000, with an anticipated performance period of approximately 180 calendar days. Responses are requested with the following information, which shall not exceed a total of eight pages. 1. Offeror name, address, points of contact with telephone numbers and e-mail addresses. 2. Business size/classification to include any designations as Small Business, 8(a), HUBZone, Service Disabled Veteran Owned and Women-Owned Small Businesses shall be indicated on first page of submission. 3. Bonding capability: construction bonding level per single contract and aggregate construction bonding level, both expressed in dollars; along with current available bonding capacity. 4. Description of your capability to perform the specialized work described above, manage subcontractors, secure and comply with environmental permits, and safely execute Dam and hydraulic Steel structures (HSS) construction. Specifically address your capacity and proposed approach to designing, fabricating, and installing Temporary Dewatering Structures (TDS) and tainter gate shoring systems. 5. Past performance and experience on up to three (3) projects of similar scope, complexity, and value completed within the past five (5) years, or at least 50% construction complete. Relevant experience includes: structural concrete demolition, specialized concrete placement (such as shrinkage-compensating concrete under strict curing/testing protocols), stainless steel structural embed/guide fabrication and welding, Tainter gate seal replacement, and work with USACE Hydraulic Steel Structures within the civil works branch. For each project, provide the title, location, general description of the scope, contract value, role (Prime or Subcontractor), and client contact information (name, phone, and email). NO RESPONSES WILL BE ACCEPTED BY FAX OR MAIL. ALL RESPONSES MUST BE E-MAILED to: Jeffrey M. Donaldson at Jeffrey.M.Donaldson@usace.army.mil. Submittals are due no later than 20 October 2026 at 2:00 PM CDT. Telephonic responses will not be honored. This is not a Request for Proposal, only a Request for Information. No award will result from this Sources Sought. This notice does not constitute any commitment by the Government. | 56% | Market Research | 10/20/2026 |
Additional Details
Solicitation Number
W912QR-60440629
Archive Date
May 7, 2026
Office Address
LOUISVILLE, KY, 40202-2230