Notice ID: 29a28302f89d4c0896dbeccd6b7afc65Presolicitation
IIJA $200M AE Design MATOC (Unrestricted)
Archived. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM UTC−04:00
- Posted
- June 30, 2022
- Notice type
- Presolicitation
- NAICS
- 541330: Engineering Services
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W072 ENDIST LOUISVILLE
- Place of performance
- Louisville, KY, 40202
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- W912QR22R0013
- Notice ID
- 29a28302f89d4c0896dbeccd6b7afc65
Description
SYNOPSIS: This announcement is open to all businesses regardless of size. The proposed services, which will be obtained by negotiated Firm Fixed Price Contracts, are for a variety of Architect/Engineer services primarily for civil works projects located within the LRD geographical boundaries. Projects outside the LRD area and for other military missions may be added at the Government's discretion upon agreement of the A/E firm. Awards will be made as Firm-Fixed Price Task Orders during the period of performance. The total combined contract capacity for the MATOC is valued at $200,000,000 over a five-year period. This is a five-year contract, with no option years. The expected construction cost of projects designed as a part of this contract is between approximately $12,000,000 and $200,000,000. The maximum task order limit is $30,000,000.00 (This value may be exceeded upon agreement of the A/E firm though not to exceed the overall contract value of $200M). Work will be issued by negotiated firm-fixed-price task orders. Firm (s) that are selected for negotiation of a contract may be required to submit additional information at a later time for use in the evaluation of qualifications for specific Task Orders. The period of performance for task orders issued under these contracts may extend beyond the five-year ordering period. Up to seven (7) firms will be selected to be a part of the MATOC. If the Contracting Officer determines during the selection process that fewer or more contracts should be awarded, based upon the selection criteria, the Contracting Officer has the discretion of adjusting that number, or awarding none at all. Once selected, the following factors will be used in deciding which selected firm will be utilized for task orders: (1) Professional qualifications necessary for satisfactory performance of required services; (2) Specialized experience and technical competence in the type of work required, including, where appropriate, experience in planning, hydraulics and hydrology, earthen structures, reinforced mass concrete structures bridges, culverts; pump stations, ecological restoration projects (3) Capacity to accomplish the work in the required time; (4) Past performance on contracts with Government agencies and private industry in terms of cost control, quality of work, and compliance with performance schedules; (5) Knowledge of the locality of the project; (6) Other appropriate evaluation criteria specific to the task order requirement. Multiple task orders may be awarded with similar completion schedules and overlapping delivery dates. Estimated award date is January 2023. In accordance with FAR 36.604 and the supplements thereto, and upon final acceptance or termination, all task orders above $35,000 will receive a performance evaluation. A performance evaluation may be prepared for lesser task orders and interim performance evaluations may be prepared at any time. Performance evaluations will be maintained for use in future source selections for Architect-Engineer Services. PROJECT SPECIFIC INFORMATION: The selected offeror will be solely responsible for the designs that they produce and will become the designer of record or Design-Build RFP preparer for each individual project on their contract. Projects may consist of planning, design, and related services in support of the civil works mission within the USACE Great Lakes and Ohio River Division Mission Boundaries. Project task orders under this contract may include design of new construction, partial renovation, or full renovation of some or all of the following types of building structures: dams, levees, pump stations, bridges, roadways, canals, ecosystem restoration, stand-alone buildings (which include administration facilities, unheated storage, and general support warehouses); and other facilities unique to civil works projects. A/E services may consist of the following activities: preparation of construction solicitations for design-bid-build (complete design) projects and design build RFPs (request for proposals); concept level designs and engineering feasibility studies; master planning; site investigation/assessment of existing conditions; value engineering services; engineering services during construction (shop drawing review, site inspection, etc.); design of demolition or deconstruction; hazardous materials survey, analysis, and abatement methodology; sustainable design; construction cost estimates and schedules; technical studies/analysis in support of design for new construction and renovation; comprehensive planning for future construction requirements at civil works locations; coordination and attainment of local, state and federal permits; support and coordination in the development of utility agreements; and utility investigations. Additional A/E support services may include: geotechnical studies; environmental compliance; National Environmental Policy Act documentation; controlled waste and flammable storage design; asbestos, lead and PCB surveys and/or abatement. Other A/E services beyond traditional design may include: site selection; American Land Title Association surveys; deed and title services; and facility assessments. Project specific requirements will be described in each individual task orders Statement of Work. SELECTION CRITERIA: This acquisition is for A-E services, and is procured in accordance with the Brooks A-E Act as implemented in Subpart 36.6 of the FAR. A-E firms meeting the requirements described in this announcement are invited to submit: (1) a Standard Form (SF) 330, Architect-Engineer Qualifications, Parts I and II, and (2) any requested supplemental data to the procurement office shown. Following an evaluation of the qualifications and performance data submitted, up to seven (7) firms that are considered to be the most highly qualified to provide the type of services required will be chosen for negotiation. Selection of firms for negotiation shall be made in order of preference based on the demonstrated competence and qualifications necessary for satisfactory performance in accordance with the specific selection criteria listed in the announcement. Selection criteria in descending order of importance are listed below. Paragraph 3(a) through Paragraph 3(d) are primary, and Paragraphs 3(e) & 3(f) are secondary. The Government will only use secondary Criteria F through G as tie-breakers among essentially technically equal A-E contractors. (a) PROFESSIONAL QUALIFICATIONS: The governments evaluation of professional qualifications will consider education, training, certifications, registrations, overall experience, relevant experience, and longevity with the firm. Only SF330 Section E, Section F, Section G, and the IDIQ additional consideration information in Section H will be used to evaluate the offerors professional qualifications. The government will also consider prior teaming experience between multiple designers included in Section E working on the same project in their proposed role and included in SF330 Section G. In addition to considering the participation of all team members on the projects listed in Section F and G, the government will give additional consideration to projects listed in Sections F and G led by the proposed Project Managers and additional consideration to projects in Sections F and G where the lead designer role was filled by at least one of the two designers included in Section E for the following disciplines: Architecture, Civil, Electrical, Mechanical and Structural. (b) SPECIALIZED EXPERIENCE AND TECHNICAL COMPETENCE: The governments evaluation of Specialized Experience and Technical Competency will consider example projects in SF330 Section F that demonstrate the Specialized Experience and Technical Competencies below. The governments evaluation will also consider how these same Specialized Experience and Technical Competencies are demonstrated in the individual team members resumes for both designers and checkers in SF330 Section E, for the disciplines as indicated below in parentheses. Use of Civil Information Modeling (Civil) Use of USACE CADBIM Policies and Procedures (Structural and Civil) Use of UFC 3-201-01, Civil Engineering (Civil, Structural, Geotechnical) Construction cost estimating using MCASES MII (Cost Engineer) Use of Specs Intact (Mechanical, Electrical, Structural, and Civil) Facilitation of Value Engineering studies in accordance with SAVE (Value Engineering) The DQMP included in Section H will also be considered when evaluating Specialized Experience and Technical Competency of the offeror. (c) CAPACITY: The Governments evaluation of the offerors capacity narrative and associated tables, figures, etc. included in SF330 Section H will consider the offerors ability to complete the work in the required time with the understanding that this contract may require multiple design teams to work multiple task orders at various locations simultaneously. The IDIQ additional consideration information included in Section H will also be considered when evaluating capacity. (d) PAST PERFORMANCE: The governments evaluation of past performance will consider (1) the performance evaluations provided in Section H for the projects in Section F, (2) any performance evaluations in ACASS/CPARS for the UEI (Unique Entity Identifier) numbers of any firms or offices listed in the SF330 or for any of the projects included in Section F, and (3) if not already considered, the overall past performance on IDIQ contracts provided in the IDIQ additional consideration information included in Section H. Performance evaluations completed by the Contracting Officers Representative (COR) or equivalent role on the contract are preferred. While all performance evaluations may be considered, those for projects listed in Section F and projects with similar scopes of work will receive the most consideration when evaluating past performance. (e) SMALL BUSINESS PARTICIPATION: The Governments evaluation of the offerors Small Business Participation plan will consider level of participation of Small Business, Small Disadvantaged Business, Woman-Owned Small Business, HUB Zone Small Business, Service-Disabled Veteran-Owned Small Business and Historically Black Colleges and Universities, Veteran Owned Small Business team members and minority institutions in the proposed contract team, measured as a percentage of the total estimated effort. (f) GEOGRAPHIC PROXIMITY: Location of firm in the general geographic area of the USACE Great Lakes and Ohio River Division Civil Works Mission Boundaries. SUBMISSION REQUIREMENTS: Offerors must submit one (1) electronic copy of the SF 330, Part l, and one electronic copy of the SF330, Part II for the prime firm. Each branch office that will have a key role in the proposed contract must also submit a copy of the SF 330 Part II. Offerors must submit a current and accurate SF 330, Part II, for each proposed sub-consultant. Any firm with an electronic mailbox responding to the solicitation should identify such address in the SF 330, Part I. Please identify the UEI number of the office(s) performing the work in Block 5 of the SF 330, Part I. UEI numbers can be obtained at www.sam.gov. The proposal shall be submitted as one file using Adobe Acrobat (.pdf). Font size shall be 10 or larger on white letter-sized paper (8 inches by 11 inches). The SF 330 will be no longer than 150 pages in length (excluding the SF 330, Part IIs). Resumes in Section E can be no more than two pages in length, and individual projects in Section F can be no more than 4 pages in length. Section H shall be 20 pages or less in length and may only include information specifically required by this pre-solicitation to be in Section H. All government evaluation of proposals associated with the selection criteria in Paragraph 3(a) and 3(b) will be performed using Section E, Section F, Section G and Section H as indicated in Paragraph 3. Any additional information included in the proposal not specifically required may not be evaluated or considered. Each printed side of a page will count as one page. Do not furnish design portfolios, prints, magazines, newspaper clippings, or CDs of completed projects. All requirements of this notice must be met for a firm to be considered responsive. Additional instructions and clarifications for SF330: SF330 Section D: The offerors shall submit an organizational chart as required by SF330 Section D. Offerors can submit a folded 11 x 17 organizational chart as part of their submission. This will be considered only one page of their submission. SF330 Section E: The individuals identified by the project roles on the SF330 may not have multiple duties or be dual-hatted . Offerors shall provide individual resumes in SF330 Section E for each of the individuals listed below in lines 1 thru 25. Individuals included in SF330 Section E must possess the certifications and registrations listed below and must have performed in their respective role (i.e. project manager, civil engineer, etc.) on projects similar to those listed in Paragraph 2 of this solicitation for the amount of time listed below. Proposals that strongly demonstrate, in lieu of just listing, the specialized experience and technical competence included in Section E Paragraph 3(b) will be evaluated more favorably. For all designer roles, the resume shall clearly list what features of work of the project were designed and stamped/sealed by the designer as the legal designer or record. For all checker roles, the resume shall clearly demonstrate that the individual has performed in the checker (QA/QC) role previously: Project Manager, Registered Architect or Professional Engineer, 10 Years Indicate years of experience leading multidisciplinary teams (Architect, Civil/Site, Mechanical, Electrical, Structural) in horizontal civil works construction projects Project Manager, Registered Architect or Professional Engineer, 10 Years Indicate years of experience leading multidisciplinary teams (Architect, Civil/Site, Mechanical, Electrical, Structural) in horizontal civil works construction projects Architect Designer, Registered Architect, 10 Years Architect Checker, Registered Architect, 10 Years Civil Engineer Designer, Registered Professional Engineer, 10 Years Civil Engineer Designer, Registered Professional Engineer, 10 Years Civil Engineer Designer, Registered Professional Engineer, 10 Years Civil Engineer Checker, Registered Professional Engineer, 10 Years Structural Engineer Designer, Registered Professional Engineer, 10 Years Structural Engineer Designer, Registered Professional Engineer, 10 Years Structural Engineer Checker, Registered Professional Engineer, 10 Years Mechanical Engineer Designer, Registered Professional Engineer, 10 Years Mechanical Engineer Checker, Registered Professional Engineer, 10 Years Electrical Engineer Designer, Registered Professional Engineer, 10 Years Electrical Engineer Checker, Registered Professional Engineer, 10 Years Geotechnical Engineering Designer, Registered Professional Engineer, 10 Years Geotechnical Engineering Checker, Registered Professional Engineer, 10 Years Environmental Engineering Designer, No certification required, 10 years Environmental Engineering Checker, No certification required, 10 years Landscape Architect, Registered Landscape Architect, 10 Years Landscape Architect, Registered Landscape Architect, 10 Years Landscape Architect Checker, Registered Landscape Architect, 10 Years Cost Engineer, Certified Cost Engineer (CCE), Certified Cost Consultant (CCC), or comparable certification (American Society of Professional Estimators or Association for Advancement of Cost Engineering), 10 Years Fire Protection Engineering Designer, Registered Fire Protection Engineer, 10 Years Fire Protection Engineering Checker, Registered Fire Protection Engineer, 10 Years Value Engineer, Certified Value Specialist, 10 Years SF330 Section F: Projects included in SF330 Section F will be considered more relevant if construction is substantially complete, and projects that achieved substantial completion more recently will be considered more relevant. Substantially complete is defined as a construction project when the project and/or facility can be used for its intended purpose. Of the up to ten projects included in SF330 Section F, a minimum of two of the projects must be design/build request for proposal preparation by the offeror and minimum of two must be fully designed by the offeror. Base MATOC or IDIQ contract awards may not be used as projects, only individual task orders that resulted in actual design effort from these base MATOC and IDIQ contracts may be used. For all projects included in Section F, the offeror must indicate what percentage by dollar value of the overall work was self-performed by the team being submitted as a part of this SF330. This percentage shall only include the work that was performed by individuals who were employed by the firms listed in this SF330, even if the work was performed as a part of a joint-venture or a team of A-E contractors. SF330 Section H: In SF330 Section H, include an evaluation of performance from the client/owner for all example projects included in SF330 Section F. Performance evaluations will not be counted against the 20-page limit of SF330 Section H or the 150-page limit for the entire SF330. In SF330 Section H, each offeror shall produce a detailed Design Quality Management Plan including the following items: An explanation of the firm's management approach Management of sub-consultants (if applicable) Procedures for obtaining local, state and federal regulatory permits in a timely manner Procedures for dealing with design features unique to localities nation-wide (like soil conditions, seismic requirements, climate factors, etc. Quality control procedures to include the roles and responsibilities of checkers for plans, specification, design analysis and electronic documents Risk management and mitigation processes and procedures to ensure that internal resources are not over committed A narrative explaining of the chain of command to include individuals that will serve as the single point of contact for the contract and other senior leaders responsible to ensure successful execution of task orders An organizational chart showing the inter-relationship of management and various team components (including sub-consultants) Section H shall also include a Capacity Narrative and associated tables, figures, etc. showing the offerors ability to complete the work with available resources and available ramp-up capacity with numerous high quality design teams. In SF330 Section H, the offerors may receive additional consideration for the successful execution of IDIQ contracts. For each IDIQ included, the offeror shall provide the contract and task order number (if applicable), the total contract capacity and capacity used, number of task orders, performance evaluation ratings for task orders (ratings only, not entire evaluation), team members noted in Section E that were legal designers of record or checkers for task orders and team members that were responsible for the overall management of the IDIQ. In SF330 Section H, all large businesses shall present a Small Business and Small Disadvantaged Business Subcontracting Plan in accordance with Public Law 95-507 as part of the response to this RFP. The number of pages of the Small Business Small Disadvantaged Business Plan do not count against the total page count for the response to the RFP. Additionally, estimate the proposed extent of participation of Small Business, Small Disadvantaged Business, Woman-Owned Small Business, HUBZone Small Business, Service-Disabled Veteran-Owned Small Business and Veteran Owned Small Business team members in the contract team using a chart showing each firm that is a team member, their small business category, and their proposed level of participation measured as a percentage of the overall estimated effort (i.e. a chart with 3 columns, respectively entitled 'Firm Name', 'Small Business Category', and '% participation'). Release of firm status will occur within 10 days after approval of any selection. All responses on SF 330 to this announcement must be received no later than 4:00 p.m. local time on 11 July 2022. No other general notification to firms under consideration for this project will be made. Facsimile transmissions will not be accepted. Solicitation packages are not provided, and no additional project information will be given to firms during the announcement period. To be eligible for award, a firm must be registered in the System for Award Management (SAM) database, via the SAM Internet site at https://www.sam.gov. Submit responses to US Army Corps of Engineers, Louisville District, ATTN: Marcel Hull 600 Dr. Martin Luther King Jr. Pl., Room 821, Louisville, KY 40202-2267. SUBMISSIONS TO THIS PROPOSAL ANNOUNCEMENT CAN BE SUBMITTED ELECTRONICALLY THROUGH DOD SAFE. No paper copies, CD-ROMs or facsimile submissions will be accepted. Electronic Proposal Submission is required through the Armys Electronic File Sharing Service, DOD SAFE (https://safe.apps.mil). The DOD SAFE Application is used to send large files to individuals that would normally be too large to send via email. There are no user accounts for SAFE. Authentication is handled via email. Anyone has access to DOD SAFE and the application is available for use by anyone. The SAFE Getting Started Guide has information on how to utilize the system ( https://safe.apps.mil/about.php). Instructions for uploading are as follows: Send an email to the Contracting Officer and Contract Specialist to receive the link to drop off your proposal (see item 2 below). This will need to be completed five (5) business days prior to the proposal due date. Marcel Hull, Contract Specialist at marcel.d.hull@usace.army.mil Josh Westgate, Contracting Officer at joshua.k.westgate@usace.army.mil You will receive an email with the link to submit your drop off. The link will be provided no later than two (2) business days prior to the proposal due date. Short Note to the Recipients: Click the Add Files or Drag and Drop your files. For file description, enter W912QR22R0013-FIRMNAME. Click Upload button to send documents. Guest Users will need to check their email to verify their email address before the recipients will be notified. (Government-issued Common Access Cards (CACs) are not required). File Size Limitations: offerors are advised to follow the DOD SAFE instruction for uploading files. DOD SAFE supports delivery up to 8GB. If needed, Offerors are advised to break the files down to smaller sections in order to upload it to the system. In such cases, please divide the sections as logically as possible and be sure to clearly name the files as specified below. File Naming Convention: To ensure your submission is received and processed appropriately, it is important that interested parties CAREFULLY ensure their electronic files adhere to the following naming convention: W912QR22R0013- FIRMNAME- VOLUME I W912QR22R0013- FIRMNAME- VOLUME II Each file name shall begin with the solicitation number followed by the firms name and a brief file description. Please see examples above. File Organization: Although hard copies are not accepted, each file shall be clearly indexed, and logically assembled. Font size shall be 10 or larger. Pages shall be letter sized (larger page sizes (such as 11x17 fold-outs,etc.) will be counted as one page. Proposals shall be in narrative format, organized, and titled so that each section of the proposal follows the order and format of the factors. Information presented should be organized so as to pertain to only the evaluation factor in the section that the information is presented. Information pertaining to more than one evaluation factor should be repeated in each section for each factor. Upload Completion and Deadline: Interested offerors shall submit proposals no later than the date and time specified on the solicitation document. The time and date of the proposal receipt will be upload completion/delivery time and date recorded within DOD SAFE site. Do not assume that electronic submission will occur instantaneously. Large files (e.g. 10MB or more) will take some time to upload. Offerors should time their upload effort with prudence by not waiting until the last few minutes- this will allow for unexpected delays in the transmittal process. Offerors are encouraged to keep a copy of the upload confirmation for their record. Submissions after the deadline will be considered late and will be processed in accordance with FAR 15.208. Electronic Files: Files shall be in their native format (i.e .doc, .xls, .ppt, etc), or if in .pdf format, shall be in searchable text. Text and graphics portfolios of the electronic copies shall be in a format readable by Microsoft Office or Adobe applications. Data submitted in a spreadsheet format shall be readable by MS Excel (all cells and formulars shall be unlocked). Any information, presented in a proposal that the Offeror wants safeguarded from disclosure to other parties must be identified and labeled in accordance with the requirements of Provision FAR 52.215-1, Instruction to Offerors- Competitive Acquisition (Jan 2017), subparagraph , which is found in 00 21 00 Instructions of the RFP. The Government will endeavor to honor the restrictions against release requested by Offerors, to the extend permitted under United States law and regulations. Bidder Inquiries: Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://ProjNet.org/ProjNet. The attached file titled ProjNet Instructions provides guidance on how to submit and review bid inquiry items. Bidders will need to be a current registered user or self-register into the system. The Bidder Inquiry Key or Quick Add Key for this project is 7M34VI-FF6NKV Note that offerors may submit only one question per inquiry. All inquiries containing multiple questions will be rejected. Only questions pertaining to the Design Services Indefinite Delivery Contract will be entertained. ProjNet will be unavailable for new inquiries during the last 5 calendar days prior to the date of synopsis due date to ensure adequate time is allotted to respond to inquiries. Primary Point of Contact: Marcel Hull Contract Specialist Marcel.D.Hull@usace.army.mil Contracting Office Address: Attn: CELRL-CT PO Box 59 Louisville, Kentucky 40201-0059 United States Place of Performance: USACE Louisville District, 600 Dr. Martin Luther King Jr. Place, Room 821, Louisville KY NOTE: Attachment 1, Sample Past Performance Questionnaire (PPQ) is attached to this posting for reference.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W912QR22R0013- Pre-Solicitation
Formal solicitation typically follows within 30–60 days. (estimate)
- 2×Pre-SolicitationCurrentJun 8, 2022
IIJA $200M AE Design MATOC (Unrestricted)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Updated to extend the proposal response date to 5 November 2025. ***** Amendment 0002 has been published****** Architect/Engineer (A/E) services for District-wide Federal Bureau of Prisons (BOP) projects primarily within the Mid-Atlantic Region mission boundaries. | - | Combined Synopsis | 11/05/2025 |
US ARMY CORPS OF ENGINEERS (USACE) — LATIN AMERICA AND CARIBBEAN DISTRICT INDUSTRY DAY ANNOUNCEMENT: DAY 1 — ARCHITECTURE & ENGINEERING (A/E) SERVICES Requirement: Callao Naval Base, Peru, Infrastructure Modernization - AE Customer Agency: Peruvian Navy Notice ID: W51DQV27Z1CV8 NAICS Code: 541330 – Engineering Services Event Date: Wednesday, December 1, 2026 Location: Centro Naval Sede San Borja, Lima, Peru RSVP Deadline: November 18, 2026, at 3:00 pm CT General Overview The U.S. Army Corps of Engineers (USACE), Latin America & Caribbean District, is hosting an Industry Day event in Lima, Peru, to engage with industry partners regarding the upcoming acquisition of the Callao Naval Base, Peru, Infrastructure Modernization Project and NAMRU-S O&M Project. To provide focused engagement for distinct industry sectors, the event is structured over three specialized days: Day 1 (Tuesday, December 1, 2026): Callao Naval Base, Peru, Infrastructure Modernization Project - Architecture & Engineering (A/E) Services (NAICS 541330) Day 2 (Wednesday, December 2, 2026): Callao Naval Base, Peru, Infrastructure Modernization Project - Construction (NAICS 236220) Day 3 (Thursday, December 3, 2026): U.S. Navy Medical Research Unit South (NAMRU-S) Lima and Iquitos, Peru - Facilities Operation and Maintenance (O&M) Services (NAICS 561210) This announcement specifically covers Day 1 (A/E Services). Separate announcements address Day 2 (Construction) and Day 3 Facilities Operation and Maintenance (O&M). Purpose of the Event The purpose is to present the planned Architectural and Engineering (A/E) requirements in support of shoreside and port facility modernization at Callao Naval Base, brief prospective prime design firms and specialized consultants on USACE engineering criteria and U.S. Federal contracting standards, provide walk-in technical guidance on federal vendor registrations, and conduct private one-on-one market research capability briefings. Summary of the Sessions The program includes three distinct sessions: A/E Design: A comprehensive briefing detailing project scope, facility design packages, site conditions, host-nation and DoD design standards, BIM requirements, procurement timelines, and USACE compliance guidelines. One-on-One Capability Briefings: Private, scheduled 15-minute briefings reserved for prospective A/E firms to present specialized technical and managerial capabilities directly to the USACE acquisition panel. Federal Systems Registration Support: Individual, walk-in technical assistance to help prospective firms navigate SAM.gov, Unique Entity Identifier (UEI), and NCAGE. Please note: This announcement is issued solely for market research and informational planning purposes. It does not constitute a Request for Proposals (RFP), an Invitation for Bids (IFB), or an obligation on the part of the U.S. Government. No contract award will result directly from this event. Logistics & Schedule Date: December 1, 2026 Hours: 08:30 – 4:00 PM CT/Local Lima Time Location: Centro Naval Sede San Borja Av. San Luis S/Nº Cdra. 24, Urb. San Borja Sur, Lima, Peru Daily Schedule Note: A detailed schedule of presentations, networking intervals, and allocated session times is currently being finalized. The specific daily agenda will be published in a forthcoming update to this announcement prior to the event. Event Details & Specific Sessions Session 1: A/E Seminar & Design Scope Briefing USACE engineering, project management, and contracting representatives will deliver a detailed technical presentation covering: Master planning, site layout, and architectural vision for the Callao Naval Base modernization. Design criteria, geotechnical and seismic considerations, coastal environment durability standards, and Unified Facilities Criteria (UFC). Building Information Modeling (BIM), specialized mechanical/electrical/plumbing (MEP), fire protection, environmental permitting, and host-nation building codes. Overview of the federal A/E Brooks Act selection process (FAR Part 36.6), evaluation criteria, submission requirements (Standard Form 330), and milestone schedules. Session 2: One-on-One Capability Briefings (Pre-Registration Required) Prospective A/E firms (including formal Joint Ventures and Prime Mentor-Protégé partnerships) may request a dedicated 15-minute private session with the USACE technical and acquisition panel. Objective: Market research to assess industry interest, multi-disciplinary engineering depth, regional design experience, BIM/CADD capabilities, and past performance. Availability: Time slots are limited and will be confirmed on a strictly first-come, first-served basis upon receipt and validation of the RSVP form. Session 3: Federal Systems Registration Support Throughout the day, USACE specialists will host an individual support station to assist contractors with: Firms interested in receiving support should bring a computer Navigating NATO Commercial and Government Entity (NCAGE) code applications. Obtaining a Unique Entity Identifier (UEI) and activating an account in SAM.gov. Project & Requirement Overview Project Description The contemplated acquisition covers comprehensive multi-disciplinary Architecture and Engineering (A/E) services. The scope of work encompasses: Topographic, hydrographic, and geotechnical site investigations and soil stabilization analysis. Comprehensive seismic engineering compliant with Peruvian seismic zones and DoD structural criteria. Concept development, 35% preliminary design, 65% intermediate design, and final 100% ready-to-advertise design packages and technical specifications. Multi-discipline engineering including civil, structural, architectural, MEP, specialized fire suppression, industrial ventilation, cold-chain refrigeration, and telecommunications. Environmental assessments, stormwater management planning, and host-nation regulatory compliance support. Complete Furniture, Fixtures, & Equipment (FF&E) interior design packages. Development of construction cost estimates (MII format) and construction phasing schedules. Summary of Facility Packages: Building 110 Primary Function: Spare Parts Warehouse Key Technical Considerations: Heavy-duty slab design, industrial racking integration, material handling flow, automated logistics staging. Building 115 Primary Function: Clothing & Gear Warehouse Key Technical Considerations: High-density pallet storage, humidity and climate control, inventory distribution bays. Building 112 Primary Function: Material Warehouse Key Technical Considerations: Bulk staging, overhead crane/hoist accommodations, heavy equipment ingress/egress ramps. Building 113 Primary Function: Customs Warehouse Key Technical Considerations: Secure bonded holding areas, host-nation customs inspection layout, physical security infrastructure. Building 114 Primary Function: Petroleum, Oil, and Lubricants (POL) Warehouse Key Technical Considerations: Secondary containment, explosion-proof electrical systems, specialized foam/water fire suppression, environmental drainage controls. Building 111 Primary Function: Medicine & Medical Supplies Warehouse Key Technical Considerations: Temperature/humidity-controlled storage (cold chain capability), pharmaceutical-grade clean finishings, backup power integration. Building 120 Primary Function: DIRNOTEMAT & Quality Control Building Key Technical Considerations: Administrative offices, testing and quality inspection laboratories, specialized testing benches, IT/telecom infrastructure. Site & Ancillary Works Primary Function: Infrastructure & Integration Key Technical Considerations: Site grading, structural fill, perimeter security, access roads, utility connections, complete FF&E packages, and host-nation compliant permitting. Streamlined RSVP & Venue Access Instructions Due to facility capacity constraints and military installation security protocols at Centro Naval, advance registration is mandatory. Attendance is limited to a maximum of three (3) representatives per company. To simplify the registration process, interested firms must follow this two-step procedure: Step 1 — Email Request: Send an email to Claudia Montero at Claudia.M.Montero@usace.army.mil, and cc Renee Booth, Meranda.R.Booth@usace.army.mil, and Jaclyn Yocum, Jaclyn.C.Yocum@usace.army.mil , no later than November 18, 2026, at 3:00 pm CT. Subject Line: RSVP Request: Callao Naval Base AE Industry Day (Dec 1, 2026) – [Company Name] Message Body: State your company name, point of contact, contact email address, and interest in attending Day 1 (A/E Services). Step 2 — Registration Form & Official Confirmation: Upon receipt of your email, Ms. Montero will reply with the official RSVP & Security Access Form. Complete the form (which collects attendee details, security credentials, and interest in 1-on-1 sessions or SAM.gov support) and return it via email. Upon review and clearance, Ms. Montero will issue an Official RSVP Confirmation Notice containing venue access instructions, check-in requirements, and confirmed one-on-one time slots (if requested). Event Documentation & Post-Event Postings To promote dynamic in-person dialogue and networking among prospective prime and subcontracting partners, detailed session slide decks, complete meeting agendas, and formal Q&A transcripts will not be published prior to the event. Pre-Event Distribution: Only logistical directions, security guidelines, and RSVP updates will be released prior to December 2, 2026. Post-Event Distribution: Following the conclusion of the event, the official presentation deck, the attendee directory (to facilitate joint ventures and teaming arrangements), and all formal Government answers to submitted questions will be posted publicly to SAM.gov under this Notice ID. Submission of Questions Pre-Event Questions: Email the POCs listed below. During the Event: Attendees may submit oral questions during designated Q&A periods or provide written questions on index cards distributed during registration. Post-Event Questions: Following the event, participants may submit technical and procurement inquiries via email to the points of contact listed below. All responses will be consolidated and posted publicly to SAM.gov. Federal Systems Registration (SAM.gov & PIEE) Prospective A/E firms are strongly encouraged to initiate federal vendor registrations immediately. Any resulting solicitation will incorporate FAR 52.204-7 (System for Award Management), mandating an active SAM registration at the time of proposal submission and contract award. Registration is free. Domestic (U.S.) Firms: Obtain a Unique Entity Identifier (UEI) and ensure an active record in SAM.gov. A CAGE code is assigned during registration. International / Peruvian Firms: Obtain a NATO Commercial and Government Entity (NCAGE) code: Non-NATO entities (including Peru) must register via the NATO Support and Procurement Agency (NSPA) portal: NSPA NCAGE Portal. Entities in NATO member or sponsored nations: Consult the NATO AC/135 Directory. Request a UEI through SAM.gov, ensuring company legal name and address match the NCAGE record exactly. Finalize registration on SAM.gov. Points of Contact (POCs) Claudia Montero - Administrative Management Assistant, USACE Latin America and Caribbean District Email: Claudia.M.Montero@usace.army.mil Renee Booth - Contracting Officer, USACE Latin America and Caribbean District Email: Meranda.R.Booth@usace.army.mil Jaclyn Yocum – Contracting Specialist, USACE Latin America and Caribbean District Email: Jaclyn.C.Yocum@usace.army.mil *********************************************************************************** CUERPO DE INGENIEROS DEL EJÉRCITO DE LOS EE. UU. (USACE) - DISTRITO DE AMÉRICA LATINA Y EL CARIBE NUNCIO DE DÍA DE LA INDUSTRIA - DÍA 1 — SERVICIOS DE ARQUITECTURA E INGENIERÍA (A/E) Requerimiento: Modernización de la Infraestructura de la Base Naval del Callao, Perú Agencia Cliente: Marina de Guerra del Perú ID de Aviso: W51DQV27Z1CV8 Código de NAICS: 541330 – Engineering Services Fecha del Evento: 1 de diciembre de 2026 Lugar: Centro Naval Sede San Borja, Lima, Peru Fecha limite para RSVP: 18 de noviembre de 2026, 3:00 pm hora Lima Descripción General El Cuerpo de Ingenieros del Ejército de los Estados Unidos (USACE), Distrito del Caribe, está organizando un evento del Día de la Industria en Lima, Perú, para interactuar con socios de la industria respecto a la próxima adquisición del Proyecto de Modernización de la Infraestructura de la Base Naval del Callao, Perú, y el Proyecto de Operación y Mantenimiento (O&M) de NAMRU-S. Con el fin de proporcionar un enfoque específico para los distintos sectores de la industria, el evento se estructura en tres días especializados: Día 1 (Martes 1 de diciembre de 2026): Proyecto de Modernización de la Infraestructura de la Base Naval del Callao, Perú — Servicios de Arquitectura e Ingeniería (A/E) (NAICS 541330) Día 2 (Miércoles 2 de diciembre de 2026): Proyecto de Modernización de la Infraestructura de la Base Naval del Callao, Perú — Construcción (NAICS 236220) Día 3 (Jueves 3 de diciembre de 2026): Unidad de Investigación Médica de la Marina de los EE. UU. Sur (NAMRU-S) Lima e Iquitos, Perú — Servicios de Operación y Mantenimiento (O&M) de Instalaciones (NAICS 561210) Este anuncio cubre específicamente el Día 1 (Servicios de A/E). Existen anuncios separados para el Día 2 (Construcción) y el Día 3 (Operación y Mantenimiento de Instalaciones). Propósito del Evento El propósito es presentar los requerimientos planificados de Arquitectura e Ingeniería (A/E) en apoyo a la modernización de las instalaciones portuarias y terrestres en la Base Naval del Callao, informar a las posibles firmas de diseño principales y consultores especializados sobre los criterios de ingeniería de USACE y los estándares de contratación federal de los EE. UU., brindar orientación técnica directa para el registro de proveedores federales, y llevar a cabo sesiones individuales privadas de presentación de capacidades para investigación de mercado. Resumen de las Sesiones El programa incluye tres sesiones distintas: Diseño de A/E: Una sesión informativa detallada sobre el alcance del proyecto, paquetes de diseño de instalaciones, condiciones del sitio, estándares de diseño de la nación anfitriona y del Departamento de Defensa (DoD), requerimientos BIM, cronogramas de adquisición y pautas de cumplimiento de USACE. Sesiones Individuales de Capacidades (One-on-One): Reuniones privadas y programadas de 15 minutos reservadas para que las firmas de A/E interesadas presenten directamente sus capacidades técnicas y de gestión especializadas ante el panel de adquisiciones de USACE. Soporte para el Registro en Sistemas Federales: Asistencia técnica individual presencial para ayudar a las firmas interesadas a navegar en SAM.gov, Identificador Único de Entidad (UEI) y NCAGE. Nota: Este anuncio se emite únicamente con fines de investigación de mercado y planificación informativa. No constituye una Solicitud de Propuestas (RFP), una Invitación a Licitación (IFB), ni una obligación por parte del Gobierno de los EE. UU. No se adjudicará ningún contrato directamente como resultado de este evento. Logística e Itinerario Fecha del Evento: miércoles 1 de diciembre de 2026 Hora: 08:30 – 4:00 PM CT/ Hora Lima Ubicación: Centro Naval Sede San Borja, Av. San Luis S/Nº Cdra. 24, Urb. San Borja Sur, Lima, Perú Nota sobre el Itinerario Diario: Actualmente se está finalizando un cronograma detallado de las presentaciones, intervalos de networking y tiempos asignados para las sesiones. La agenda diaria específica se publicará en una actualización próxima a este anuncio antes del evento. Detalles del Evento y Sesiones Específicas Sesión 1: Seminario de A/E e Informativa del Alcance del Diseño Representantes de ingeniería, gestión de proyectos y contratación de USACE ofrecerán una presentación técnica detallada que cubrirá: Planificación maestra, distribución del sitio y visión arquitectónica para la modernización de la Base Naval del Callao. Criterios de diseño, consideraciones geotécnicas y sísmicas, estándares de durabilidad en entornos costeros y Criterios Unificados de Instalaciones (UFC). Modelado de Información de Construcción (BIM), sistemas especializados de mecánica/electricidad/plomería (MEP), protección contra incendios, permisos ambientales y códigos de construcción de la nación anfitriona. Descripción general del proceso federal de selección de A/E bajo la Ley Brooks (FAR Parte 36.6), criterios de evaluación, requisitos de presentación (Formulario Estándar 330) y cronogramas de hitos. Sesión 2: Sesiones Individuales de Capacidades (Se requiere registro previo) Las firmas de A/E interesadas (incluidas las asociaciones en participación (Joint Ventures) formales y alianzas Mentor-Protégé) pueden solicitar una sesión privada dedicada de 15 minutos con el panel técnico y de adquisiciones de USACE. Objetivo: Investigación de mercado para evaluar el interés de la industria, la capacidad de ingeniería multidisciplinaria, la experiencia de diseño regional, las capacidades en BIM/CADD y el historial de desempeño. Disponibilidad: Los cupos son limitados y se confirmarán en estricto orden de llegada tras la recepción y validación del formulario RSVP. Sesión 3: Soporte para el Registro en Sistemas Federales Durante el día, especialistas de USACE dispondrán de una estación de soporte individual para ayudar a los contratistas con: Navegación y solicitud del código de Entidad Comercial y Gubernamental de la OTAN (NCAGE). Obtención del Identificador Único de Entidad (UEI) y activación de la cuenta en SAM.gov. Importante: Las firmas interesadas en recibir soporte deben traer una computadora portátil. Descripción General del Proyecto y Requerimientos Descripción del Proyecto La adquisición contemplada cubre servicios integrales multidisciplinarios de Arquitectura e Ingeniería (A/E). El alcance del trabajo incluye: Investigaciones topográficas, hidrográficas y geotécnicas del sitio, y análisis de estabilización de suelos. Ingeniería sísmica integral que cumpla con las zonas sísmicas peruanas y los criterios estructurales del DoD. Desarrollo de conceptos, diseño preliminar al 35%, diseño intermedio al 65%, y paquetes de diseño final al 100% listos para licitación con especificaciones técnicas. Ingeniería multidisciplinaria que incluye civil, estructural, arquitectónica, MEP, supresión de incendios especializada, ventilación industrial, refrigeración de cadena de frío y telecomunicaciones. Evaluaciones ambientales, planificación del manejo de aguas pluviales y apoyo para el cumplimiento regulatorio con la nación anfitriona. Paquetes completos de diseño de interiores para Mobiliario, Accesorios y Equipamiento (FF&E). Desarrollo de estimaciones de costos de construcción (formato MII) y cronogramas de fases de construcción. Resumen de Paquetes de Instalaciones A continuación, se detallan los edificios e infraestructura contemplados en el alcance del diseño: Edificio 110 - Almacén de repuestos Diseño de losas de alta resistencia, integración de estanterías industriales, flujo de manejo de materiales, área de preparación logística automatizada. Edificio 115 - Almacén de Ropa y Equipamiento Almacenamiento de palets de alta densidad, control de humedad y climatización, bahías de distribución de inventario. Edificio 112 - Almacén de Materiales Almacenamiento a granel, adecuación para grúas pórtico/polipastos superiores, rampas de ingreso/egreso para equipos pesados. Edificio 113 - Almacén de aduana Áreas de retención aduanera seguras, diseño para inspección de aduanas locales, infraestructura de seguridad física. Edificio 114 - Almacén de Petróleo, Aceites y Lubricantes — POL Contención secundaria, sistemas eléctricos a prueba de explosiones, sistemas especializados de supresión de incendios por espuma/agua, controles de drenaje ambiental. Edificio 111 - Almacén de Medicinas y Suministros Médicos Almacenamiento con control de temperatura y humedad (capacidad de cadena de frío), acabados limpios de grado farmacéutico, integración de energía de respaldo. Edificio 120 - Edificio de DIRNOTEMAT y Control de Calidad Oficinas administrativas, laboratorios de prueba e inspección de calidad, bancos de prueba especializados, infraestructura de TI y telecomunicaciones. Obras del Sitio y Auxiliares - Infraestructura e integración Nivelación del terreno, relleno estructural, seguridad perimetral, vías de acceso, conexiones de servicios públicos, paquetes completos de FF&E y tramitación de permisos de acuerdo con la normativa de la nación anfitriona. Instrucciones para RSVP y Acceso al Lugar del Evento Debido a las limitaciones de capacidad de las instalaciones y a los protocolos de seguridad militar en el Centro Naval, el registro previo es obligatorio. La asistencia está limitada a un máximo de tres (3) representantes por empresa. Para simplificar el proceso de registro, las firmas interesadas deben seguir este procedimiento de dos pasos: Paso 1 — Solicitud por Correo Electrónico: Envíe un correo electrónico a Claudia Montero, Claudia.M.Montero@usace.army.mil), con copia a Renee Booth Meranda.R.Booth@usace.army.mil, y Jaclyn Yocum, Jaclyn.C.Yocum@usace.army.mil, a más tardar el 18 de noviembre de 2026 a las 3:00 pm CT. Línea de Asunto: RSVP Request: Callao Naval Base AE Industry Day (Dec 1, 2026) – [Nombre de la Empresa] Cuerpo del Mensaje: Indique el nombre de su empresa, punto de contacto, correo electrónico de contacto y su interés en asistir al Día 1 (Servicios de A/E). Paso 2 — Formulario de Registro y Confirmación Oficial Al recibir su correo, la Sra. Montero responderá con el Formulario Oficial de RSVP y Acceso de Seguridad. Complete el formulario (que recopila detalles de los asistentes, credenciales de seguridad e interés en sesiones 1 a 1 o soporte para SAM.gov) y devuélvalo por correo electrónico. Tras la revisión y aprobación, la Sra. Montero emitirá un Aviso de Confirmación de RSVP Oficial que contendrá las instrucciones de acceso al lugar, los requisitos de registro de entrada y los horarios de las sesiones individuales (si fueron solicitadas). Documentación del Evento y Publicaciones Posteriores Para promover un diálogo presencial dinámico y el networking entre los posibles socios principales y subcontratistas, no se publicarán las presentaciones detalladas de las sesiones, las agendas completas ni las transcripciones oficiales de preguntas y respuestas antes del evento. Distribución Previa al Evento: Solo se publicarán las indicaciones logísticas, las pautas de seguridad y las actualizaciones de RSVP antes del 2 de diciembre de 2026. Distribución Posterior al Evento: Tras la conclusión del evento, la presentación oficial, el directorio de asistentes (para facilitar consorcios y acuerdos de equipo) y todas las respuestas gubernamentales formales a las preguntas presentadas se publicarán en SAM.gov bajo este ID de Anuncio. Envío de Preguntas Preguntas Previas al Evento: Envíe un correo electrónico a los puntos de contacto (POC) enumerados abajo. Durante el Evento: Los asistentes podrán formular preguntas verbales durante los periodos designados para preguntas y respuestas o entregar preguntas por escrito en tarjetas que se distribuirán durante el registro. Preguntas Posteriores al Evento: Después del evento, los participantes podrán enviar consultas técnicas y de adquisiciones por correo electrónico a los puntos de contacto indicados. Todas las respuestas se consolidarán y se publicarán en SAM.gov. Registro en Sistemas Federales (SAM.gov y PIEE) Se recomienda a las firmas de A/E interesadas que inicien de inmediato sus registros como proveedores federales. Cualquier solicitud resultante incorporará la cláusula FAR 52.204-7 (System for Award Management), que exige un registro activo en SAM al momento de presentar la propuesta y de la adjudicación del contrato. El registro es gratuito. Firmas Locales (EE. UU.): Obtener un Identificador Único de Entidad (UEI) y asegurar un registro activo en SAM.gov. El código CAGE se asigna automáticamente durante el registro. Firmas Internacionales / Peruanas: Obtener un código de Entidad Comercial y Gubernamental de la OTAN (NCAGE): Las entidades no pertenecientes a la OTAN (incluyendo al Perú) deben registrarse a través del portal de la Agencia de Apoyo y Adquisiciones de la OTAN (NSPA): Portal NSPA NCAGE. Entidades en naciones miembros o patrocinadas por la OTAN: Consultar el Directorio AC/135 de la OTAN. Solicitar un UEI a través de SAM.gov, asegurando que el nombre legal y la dirección de la empresa coincidan exactamente con el registro NCAGE. Finalizar el registro en SAM.gov. Puntos de Contacto (POCs) Para cualquier consulta relacionada con este evento, por favor comuníquese con los siguientes representantes: Claudia Montero - Asistente de Gestión Administrativa, Distrito de América Latina y el Caribe de USACE Correo Electrónico: Claudia.M.Montero@usace.army.mil Renee Booth - Oficial de Contrataciones, Distrito de América Latina y el Caribe de USACE, Correo Electrónico: Meranda.R.Booth@usace.army.mil Jaclyn Yocum - Especialista en Contrataciones, Distrito de América Latina y el Caribe de USACE Correo Electrónico: Jaclyn.C.Yocum@usace.army.mil | - | Special Notice | 11/18/2026 |
| - | Awarded | Open | |
| - | Awarded | Open | |
| - | Awarded | Open |
Additional Details
Solicitation Number
W912QR22R0013
Archive Date
Not specified
Office Address
LOUISVILLE, KY, 40202-2230