Notice ID: 3149ec62f70c444d93d25adc1b0e413ePresolicitation
Ft. Bliss ERCIP Microgrid Improvement A/E Services
Archived. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM UTC−05:00
- Posted
- February 8, 2023
- Notice type
- Presolicitation
- NAICS
- 541330: Engineering Services
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W072 ENDIST LOUISVILLE
- Place of performance
- Fort Bliss, TX
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- W912QR23R0021
- Notice ID
- 3149ec62f70c444d93d25adc1b0e413e
Description
AMENDMENT 0001 - SEE ATTACHMENT FOR DETAILS ************************************************** Notice Type: Pre-solicitation Posted Date: Response Date: Archiving Policy: Automatic, 15 days after response date Archive Date: Base Notice: Architect/Engineer (A/E) Services For a Firm Fixed Price Contract to Support Multiple Power Generation, Distribution, and Control Projects at Fort Bliss, TX Classification Code: C219 -- Architect and engineering services NAICS Code: 541 -- Professional, Scientific, and Technical Services/541330 -- Engineering Services NOTICE INFORMATION Agency/Office: U.S. Army Corps of Engineers Location: USACE District, Louisville Title: Architect/Engineer (A/E) Services for a Fixed Price Contract to Support Multiple Power Generation, Distribution, and Control Projects at Fort Bliss, TX Description(s): 1.) SYNOPSIS: This announcement is open to all businesses regardless of size. The proposed services, which will be obtained by a negotiated Firm Fixed Price Contract, are for the development of comprehensive design/bid/build (D/B/B) documents to include plans, specifications, environmental reports, equipment lists, commissioning plans (including Owners Project Requirements), design analyses, draft permit applications, and other documents for multiple microgrid projects at Fort Bliss, TX. This contract is also anticipated to include services during the advertisement and construction phases of these projects. It is expected that this A/E contract will result in the concurrent production of three to four separate D/B/B packages. Each of the projects to be designed as part of this task order will provide on-site power generation, distribution, and microgrid control systems capable of supplying the critical loads in their respective areas of the Fort Bliss installation for a minimum of 14 days. One firm will be selected. If necessary, secondary selection criteria will be used as a tiebreaker between Offerors considered as technically equal. Notice to Proceed is expected to occur in May 2023. In accordance with FAR 36.604 and the supplements thereto, and upon final acceptance or termination, this contract will receive a performance evaluation. Interim performance evaluations may be prepared at any time. Performance evaluations will be maintained for use in future source selections for Architect-Engineer Services. Total contract duration is 1050 calendar days (Design of 330 calendar days and Construction duration of 720 calendar days. The anticipated value of this A-E contract requirement is between $1,000,000 and $5,000,000. Construction Options are anticipated will include Construction Phase Services. 2.) PROJECT INFORMATION: The selected offeror will be solely responsible for the designs that they produce and will become the designer of record for each individual project on their contract. Projects consist of on-site power generation, distribution, and microgrid control systems capable of supplying the critical loads in their respective areas of the Fort Bliss installation for a minimum of 14 days. Combined, these projects are expected to provide approximately 20MW of prime-rated, natural gas-powered electricity generation, as well as undetermined capacities of PV solar electrical generation and battery energy storage system (BESS). These projects have varying requirements for interconnection with existing power systems, including communicating with the private utility providers control systems to allow automated switching between grid and generator power, peak shaving, and other features. The only new buildings expected to be required are ancillary features such as small control houses. Projects will include advanced metering, SCADA, antiterrorism and cybersecurity measures, site improvements, extensions of utilities including natural gas lines, metering of natural gas, and integration into the existing Enterprise Energy Data Reporting System (EEDRS). A/E services will consist of the following activities: preparation of construction solicitations for design-bid-build (complete design) projects; site investigation/assessment of existing conditions; value engineering services; engineering services during construction (shop drawing review, site inspection, etc.); design of demolition or deconstruction; hazardous materials survey, analysis, and abatement methodology; sustainable design; construction cost estimates and schedules; technical studies/analysis in support of design for new construction and renovation. Additional A/E support services may include: civil site design; geotechnical studies; design for the renovation of existing facilities; environmental compliance; National Environmental Policy Act documentation; controlled waste and flammable storage design; asbestos, lead and PCB surveys and/or abatement; and utility investigations. Other A/E services beyond traditional design may include: site selection; DD form 1391 development; facility assessments; and value engineering workshops. Construction cost estimating will be accomplished for all design projects using the current generation and version of Micro-Computer Aided Cost Estimating System (MII) software (software and database is available from the Government for a nominal fee). This project is not expected to require design using BIM technology, which utilizes computer aided design (CAD) technology with information loaded within three dimensional models. However, if any BIM design is required by the scope of work, the A/E firm is responsible for the training and associated training costs for both primary and back-up BIM team members. BIM products will be produced in the current version of either the AECOSIM or Revit as specified in each task order. Traditional CAD deliverables, if required by this contracts scope of work, shall include Microstation (.dgn) or AutoCAD (.dwg) files as specified by the scope of work. The estimated cost range for each associated construction contract is between $1,000,000 and $5,000,000 and between $5,000,000 and $10,000,000. 3.) SELECTION CRITERIA: Selection criteria in descending order of importance are listed below. "a" through "d" are primary criteria; "e" is a secondary criteria. a. Professional Qualifications: The government's evaluation of professional qualifications will consider overall experience, education, training, certifications, registrations, relevant experience, and longevity with the firm. Offerors that propose team members who have worked, in the same role, on successful power generation projects will be rated more favorably. b. Specialized Experience and Technical Competence: The government's evaluation of Specialized Experience and Technical Competency will consider the degree to which each of the proposed team members in SF330 Section E, and the example projects in SF330 Section F, demonstrate the Specialized Experience and Technical Competencies below. The team members and projects to be evaluated for each competency are shown below in square brackets. Non-designers will be evaluated on their experience working in the role for which they are being proposed (i.e., for subfactor 1 below, the proposed project manager will be evaluated on his or her experience as a project manager on a design of paralleled, multi-megawatt, fossil fuel powered generators.) 1. Design of paralleled, multi-megawatt, fossil fuel powered generators [Roles 1 through 8; projects] 2. Design of a microgrid control system [Roles 1,2,3, and 8; projects] 3. Design of a solar power generation plant of at least one Megawatt. [Roles 1,2,3, and 8; projects] 3. Design of a Battery Electric Storage System of at least one megawatt-hour [Roles 1,2,3, and 8; projects] 5. Design or modification of a medium-voltage substation [Roles 1,2,3,6,7, and 8; projects] 6. Construction cost estimating using MCACES MII [Role 8] 7. Facilitation of design charrettes [Role 1] 8. Use of Specs Intact [Roles 2, 4, 6] Additional consideration will be given to offerors who provide a Design Quality Management Plan in SF330 Section H that demonstrates a clear understanding of USACE quality management policies and that details quality management activities that will be used in addition to those required by USACE policy. c. Capacity: The government's evaluation of the offeror's capacity narrative included in the Design Quality Management Plan in SF330 Section H will consider the offeror's ability to complete the work in the required time with the understanding that this contract will require the production of at least three designs simultaneously. d. Past Performance: The government's evaluation of past performance will consider the offeror's ability to design projects within funding limitations, comply with performance schedules, provide high quality design products, and minimize cost and time growth of the project during construction. e. Small Business Participation: Extent of participation of small businesses (including women-owned), small disadvantaged businesses, historically black colleges and universities, and minority institutions in the proposed contract team, measured as a percentage of the total estimated effort. 4.) SUBMISSION REQUIREMENTS: Interested firms having the capabilities to perform this work must submit 1 digital copy of SF 330 Part I and 1 digital copy of SF 330 Part II for the prime firm and all consultants to the above address not later than the response date indicated above. Solicitation packages are not provided. This is not a request for proposal. SUBMISSIONS TO THIS PROPOSAL ANNOUNCEMENT MUST BE SUBMITTED ELECTRONICALLY THROUGH DOD SAFE. No paper copies, CD-ROMs or facsimile submissions will be accepted. Electronic Proposal Submission is required through the Armys Electronic File Sharing Service, DOD SAFE (https://safe.apps.mil). The DOD SAFE Application is used to send large files to individuals that would normally be too large to send via email. There are no user accounts for SAFE. Authentication is handled via email. Anyone has access to DOD SAFE and the application is available for use by anyone. The SAFE Getting Started Guide has information on how to utilize the system (https://safe.apps.mil/about.php). Instructions for uploading are as follows: 1. Send an email to the Contract Specialist to receive the link to drop off your proposal. This will need to be completed five (5) business days prior to the proposal due date. a. Alexa Dukes, Contract Specialist at Alexa.L.Dukes@usace.army.mil 2. You will receive an email with the link to submit your drop off. The link will be provided no later than two (2) business days prior to the proposal due date. 3. Short Note to the Recipients: Click the Add Files or Drag and Drop your files. For file description, enter W912QR23R0021-FIRMNAME. 4. Click Upload button to send documents. 5. Guest Users will need to check their email to verify their email address before the recipients will be notified. (Government-issued Common Access Cards (CACs) are not required). File Size Limitations: offerors are advised to follow the DOD SAFE instruction for uploading files. DOD SAFE supports delivery up to 8GB. If needed, Offerors are advised to break the files down to smaller sections in order to upload it to the system. In such cases, please divide the sections as logically as possible and be sure to clearly name the files as specified below. File Naming Convention: To ensure your submission is received and processed appropriately, it is important that interested parties CAREFULLY ensure their electronic files adhere to the following naming convention: W912QR23R0021- FIRMNAME- VOLUME I W912QR23R0021- FIRMNAME- VOLUME II Each file name shall begin with the solicitation number followed by the firms name and a brief file description. Please see examples above. File Organization: Although hard copies are not accepted, each file shall be clearly indexed and logically assembled. Font size shall be 10 point font or larger. Pages shall be letter sized (larger page sizes such as 11x17 foldouts, etc. will be counted as two pages). Proposals shall be in narrative format, organized, and titled so that each section of the proposal follows the order and format of the factors. Information presented should be organized so as to pertain to only the evaluation factor in the section that the information is presented. Information pertaining to more than one evaluation factor should be repeated in each section for each factor. Upload Completion and Deadline: Interested offerors shall submit proposals no later than the date and time specified on the solicitation document. The time and date of the proposal receipt will be upload completion/delivery time and date recorded within DOD SAFE site. Do not assume that electronic submission will occur instantaneously. Large files (e.g. 10MB or more) will take some time to upload. Offerors should time their upload effort with prudence by not waiting until the last few minutes- this will allow for unexpected delays in the transmittal process. Offerors are encouraged to keep a copy of the upload confirmation for their record. Submissions after the deadline will be considered late and will be processed in accordance with FAR 15.208. Electronic Files: Files shall be in their native format (i.e .doc, .xls, .ppt, etc), or if in .pdf format, shall be in searchable text. Text and graphics portfolios of the electronic copies shall be in a format readable by Microsoft Office or Adobe applications. Data submitted in a spreadsheet format shall be readable by MS Excel (all cells and formulars shall be unlocked). Any information, presented in a proposal that the Offeror wants safeguarded from disclosure to other parties must be identified and labeled in accordance with the requirements of Provision FAR 52.215-1, Instruction to Offerors- Competitive Acquisition (Jan 2017), subparagraph (e). The Government will endeavor to honor the restrictions against release requested by Offerors, to the extent permitted under United States law and regulations. Offerors must submit a current and accurate SF 330, Part II, for each proposed sub-consultant. Any firm with an electronic mailbox responding to the solicitation should identify such address in the SF 330, Part I. Please identify the SAM Unique Entity ID number of the office(s) performing the work in Block 5 of the SF 330, Part I. SAM Unique Entity ID may be obtained by through SAM.gov. The proposal shall be submitted as one file. Font size shall be 10 or larger on white letter-sized paper (8 inches by 11 inches). The SF 330 will be no longer than 100 pages in length (excluding the SF 330, Part IIs) and Section H will be 20 pages or less in length. Each printed side of a page will count as one page. Do not furnish portfolios, prints, magazines, newspaper clippings, or CDs of completed projects. All requirements of this notice must be met for a firm to be considered responsive. Additional instructions and clarifications for SF330: SF330 Section D: The offerors shall submit an organizational chart as required by SF330 Section D. Offerors can submit a folded 11 x 17 organizational chart as part of their submission. This will be considered only one page of their submission. SF330 Section E: The individuals identified by the project roles on the SF330 may not have multiple duties or be "dual- hatted." Offerors shall provide individual resumes in SF330 Section E for each of the individuals listed below in lines 1 through 8. Individuals included in SF330 Section E must possess the degrees, certifications, and registrations listed below and must have performed in their respective role (e.g. project manager, electrical engineer lead designer, electrical engineer checker) for the amount of time listed below. Any additional resumes beyond the numbers identified in the below listing will not be evaluated. Role Required Registration/Certification; Minimum Education Required years of experience in this role 1. Project Manager Registered Professional Engineer; B.S. electrical or mechanical engineering 15 2. Electrical Engineer Lead Designer Registered Professional Engineer; B.S. electrical engineering 15 3. Electrical Engineer Checker Registered Professional Engineer; B.S. electrical engineering 15 4. Mechanical Engineer Lead Designer Registered Professional Engineer, B.S. mechanical engineering 15 5. Mechanical Engineer Checker Registered Professional Engineer, B.S. mechanical engineering 15 6. Registered Communication Distribution Designer (RCDD) BICSI-certified RCDD; B.S. electrical, communications, or computer Engineering 10 7. Registered Communication Distribution Design (RCDD) Checker BICSI-certified RCDD; B.S. electrical, communications, or computer engineering 10 8. Lead Cost Estimator Certified Cost Professional or equivalent; no degree requirement 15 SF330 Section F: For all example projects included in SF330 Section F, project design must have been completed within the last 5 years. Completion is defined as when the project can be advertised for construction. Of the up to five projects included in SF330 Section F, a minimum three of the projects must have been design/bid/build projects, fully designed by the offeror, each of which included a minimum of 3 MW of medium-voltage fossil fuel power generation, utilizing multiple paralleled generators, which tied into an existing power grid at the substation level. A minimum of two of the projects must have been design/bid/build projects, fully designed by the offeror, each of which included solar power generation of at least 1MW and battery electric storage systems (BESS) of at least 1MW-hour. SF330 Section H: In SF330 Section H, include an evaluation of performance from the client/owner for all example projects included in SF330 Section F. If desired, performance evaluations may also be included for additional projects listed in the resumes provided in Section E. Performance evaluations will not be counted against the 20-page limit of SF330 Section H or the 60-page limit for the entire SF330. In SF330 Section H, each offeror shall present a Design Quality Management Plan including an explanation of the firm's management approach; management of sub-consultants (if applicable); quality control procedures (for plans, specification, design analysis and electronic documents); confirmation that the proposed team members are not over-committed; an organizational chart showing the inter-relationship of management and various team components (including sub-consultants); and a matrix showing which team members listed in Section E worked, in the same roles as they are being offered for this solicitation, on which example projects listed in Section F. In SF330 Section H, all large businesses shall present a Small Business and Small Disadvantaged Business Subcontracting Plan in accordance with Public Law 95-507 as part of the response to this RFP. The number of pages of the Small Disadvantaged Business Plan do not count against the total page count for the response to the RFP. Additionally, estimate the proposed extent of participation of Small Business, Small Disadvantaged Business, Woman-Owned Small Business, HUBZone Small Business, Service-Disabled Veteran-Owned Small Business and Veteran Owned Small Business team members in the contract team using a chart showing each firm that is a team member, their small business category, and their proposed level of participation measured as a percentage of the overall estimated effort (i.e. a table with 3 columns, respectively entitled 'Firm Name', 'Small Business Category', and '% Participation'). Release of firm status will occur within 10 days after approval of any selection. All responses on SF 330 to this announcement must be received no later than 4:00 p.m. Eastern Time on 27 February 2023. No other general notification to firms under consideration for this project will be made. Facsimile transmissions will not be accepted. Solicitation packages are not provided, and no additional project information will be given to firms during the announcement period. To be eligible for award, a firm must be registered in the System for Award Management (SAM) database, via the SAM Internet site at https://www.sam.gov. OFFEROR'S QUESTIONS AND COMMENTS Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://www.ProjNet.org/ProjNet. As noted below, offerors shall not submit their proposals via ProjNet. Offerors shall submit their proposals in accordance with the provisions stated in the solicitation. To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into system. The Solicitation Number is: W912QR23R0021 The Bidder Inquiry Key is: AD398B-96PRUU Specific Instructions for ProjNet Bid Inquiry Access: 1. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen. 2. Identify the Agency. This should be marked as USACE. 3. Key. Enter the Bidder Inquiry Key listed above. 4. Email. Enter the email address you would like to use for communication. 5. Select Continue. A page will then open stating a user account was not found and will ask you to create one using the provided form. 6. Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system. 7. Select Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system. Specific Instructions for Future ProjNet Bid Inquiry Access: 1. For future access to ProjNet, you will not be emailed any type of password. You will utilize your Secret Question and Secret Answer to log in. 2. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen. 3. Identify the Agency. This should be marked as USACE. 4. Key. Enter the Bidder Inquiry Key listed above. 5. Email. Enter the email address you used to register previously in ProjNet. 6. Select Continue. A page will then open asking you to enter the answer to your Secret Question. 7. Enter your Secret Answer and click Login. Once this is completed you are now logged into the system. From this page you may view all bidder inquiries or add an inquiry. Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team. Offerors are requested to review the specification in its entirety and to review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP. Information concerning the status of the evaluation and/or award will NOT be available after receipt of bids/proposals. NOTES: 1. Offerors shall not submit their proposals via ProjNet, but in accordance with the provisions stated in the solicitation. Any questions regarding acceptable means of submitting offers shall be made directly to the Contract Specialist identified in the solicitation. 2. Government responses to technical inquiries and questions relating to proposal procedures or bonds that are submitted to ProjNet in accordance with the procedures above are not binding on the Government unless an amendment is issued on Standard Form 30. In the case of any conflicts, the solicitation governs. Any changes or revisions to the solicitation will be made by formal amendment. Government responses will be limited to: (a) Notice that an amendment will be issued; (b) Reference to an existing requirement contained in the solicitation; or (c) Notice that a response is not necessary. The ability to enter technical inquiries and questions relating to proposal procedures or bonds will be disabled five (5) days prior to the closing date stated in the solicitation. No Government responses will be entered into the ProjNet system within two (2) days prior to the closing date stated in the solicitation.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W912QR23R0021- Pre-Solicitation
Formal solicitation typically follows within 30–60 days. (estimate)
- 2×Pre-SolicitationCurrentJan 27, 2023
Ft. Bliss ERCIP Microgrid Improvement A/E Services
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This award is for Phased Array Tracking Radar to Intercept of Target (PATRIOT) Advanced Capability-3 (PAC-3) Guidance Processor Unit Redesign (GPUR) Seeker Block V (SBV) Flight Test Support. The effort includes system level testing, data analysis, problem resolution and flight test and analysis support. Award was made to Lockheed Martin Missiles and Fire Control (LMMFC), 1701 West Marshall Drive, Grand Prairie, Texas 75051: CAGE code 64059, as other than full and open competition, as authorized by under the authority of Title 10 United States Code (U.S.C.) 3204 (a)(1), as implemented by FAR 6.302-1(a)(2)(ii)(A) and (B), whereas there is only one responsible source and no other supplies or services will satisfy agency requirements, when it is likely that award to any other source would result in substantial duplication of cost to the Government that is not expected to be recovered through competition, to include awarding to any other source would result in unacceptable delays in fulfilling the agency’s requirements. | - | Awarded | Open |
*****RECENT UPDATE 4 February 2026: Redacted J&A posted IAW FAR 6.305***** THIS IS A NOTICE OF INTENT TO AWARD SOLE SOURCE AND IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. This synopsis is hereby issued in accordance with FAR Part 5.203, to announce the Government's intent to award a 8-month, Firm Fixed-Price Bridge Contract, on a noncompetitive basis to Trideum Corporation (CAGE 351S9) for the Joint Base San Antonio (JBSA) Mission Training Complex Capabilities Support (MTCCS) effort. This is a notice of intent to award a sole source contract under statutory authority 10 U.S.C. 2304(c)(l) set forth in Federal Acquisition Regulation (FAR) 6.302-1 and Defense Federal Acquisition Regulation Supplement Procedures, Guidance, and Information 206-302-1, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Army Contracting Command-Orlando (ACC-ORL} and JBSA have identified a need to award a sole source contract to Trideum Corp (CAGE 351S9), to continue performance of JBSA MTCCS requirements. The current JBSA MTCCS Task Order expires 28 JAN 26. The contemplated sole source contract will include a limited performance period of five (5) months, commencing 29 JAN 2026 - 30 SEP 2026, ensuring continuation of mission command (MC) training at the JBSA Mission Training Complexes (MTCs). Services performed under this sole source contract will include the continuation of non-personal services to support the Mission Training Complex (MTC) to units stationed at and supported by Joint Base San Antonio (JBSA). No other contractor is in the position to assemble a large team of administrative, program management and subject matter experts (SMEs) who specialize in providing individual through collective Mission Command (MC} training, by the expiration of the current JBSA MTCCS contract performance period (28 JAN 26}. Award to anyone other than the incumbent contractor (Trideum) would result in a significant break in service. Award of this limited Bridge Contract is result of decrements identified in the Program Objective Memorandum for Fiscal Years FY27 through FY31 (POM 27-31), and as a result, the JBSA MTC will close at the end of FY26. This is NOT a request for competitive quotes. The Government intends to negotiate solely under statutory authority 10 U.S.C. 2304(c}(l) set forth in Federal Acquisition Regulation (FAR) 6.302-1. Any interested firms must identity their interest and capability to respond to the requirement no later than 15 business days after this notice posts. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Please respond by 24 DEC 2025 at 1300 hours Eastern Standard Time (EST). Your response must include your stated technical knowledge of and experience with mission command (MC) training and information to demonstrate the Contractor's ability to complete Phase-In activities and commence full performance by the end of the current JBSA contract (28 JAN 2026). Send your response to Will Bass via willie.c.bass2.civ@army.mil. All responding contractors must be registered to the System for Award Management (SAM). | - | Special Notice | 12/24/2026 |
This notice is for informational purposes only. Under the authority of FAR 6.302-1(a), the U.S. Army Corps of Engineers (USACE) Southwest District - Forh Worth intends to issue a contract action on a sole-source basis to Burns & McDonnell, Inc (CAGE: 1VKQ1) ("Designer of Record" or "DOR"). This sole-source contract action will acquire architect-engineer (A-E) design and construction support services from the DOR, to complete the Site Improvements for the ACC, Phase 4 project at JBSA-Lackland AFB, Texas 78236. These site improvements were once designed under a Design-Build Contract W9126G18C0077. The AE services will include updating the design documents to current site conditions and design criteria. The scope of the design includes the construction of open areas and parking lots, a wet detention pond, a walking trail, lighting around the detention pond, and associated pedestrian features. The services also include support during solicitation through award of construction and an Option to provide Construction Phase Services (CPS). The AE shall update the site improvements that were descoped from Construction Contract W9126G18C0077, Modification 007, dated April 21, 2021, to ensure compliance with current codes and that the project design reflects these updates. | - | Special Notice | 12/04/2025 |
US ARMY CORPS OF ENGINEERS (USACE) — LATIN AMERICA AND CARIBBEAN DISTRICT INDUSTRY DAY ANNOUNCEMENT: DAY 1 — ARCHITECTURE & ENGINEERING (A/E) SERVICES Requirement: Callao Naval Base, Peru, Infrastructure Modernization - AE Customer Agency: Peruvian Navy Notice ID: W51DQV27Z1CV8 NAICS Code: 541330 – Engineering Services Event Date: Wednesday, December 1, 2026 Location: Centro Naval Sede San Borja, Lima, Peru RSVP Deadline: November 18, 2026, at 3:00 pm CT General Overview The U.S. Army Corps of Engineers (USACE), Latin America & Caribbean District, is hosting an Industry Day event in Lima, Peru, to engage with industry partners regarding the upcoming acquisition of the Callao Naval Base, Peru, Infrastructure Modernization Project and NAMRU-S O&M Project. To provide focused engagement for distinct industry sectors, the event is structured over three specialized days: Day 1 (Tuesday, December 1, 2026): Callao Naval Base, Peru, Infrastructure Modernization Project - Architecture & Engineering (A/E) Services (NAICS 541330) Day 2 (Wednesday, December 2, 2026): Callao Naval Base, Peru, Infrastructure Modernization Project - Construction (NAICS 236220) Day 3 (Thursday, December 3, 2026): U.S. Navy Medical Research Unit South (NAMRU-S) Lima and Iquitos, Peru - Facilities Operation and Maintenance (O&M) Services (NAICS 561210) This announcement specifically covers Day 1 (A/E Services). Separate announcements address Day 2 (Construction) and Day 3 Facilities Operation and Maintenance (O&M). Purpose of the Event The purpose is to present the planned Architectural and Engineering (A/E) requirements in support of shoreside and port facility modernization at Callao Naval Base, brief prospective prime design firms and specialized consultants on USACE engineering criteria and U.S. Federal contracting standards, provide walk-in technical guidance on federal vendor registrations, and conduct private one-on-one market research capability briefings. Summary of the Sessions The program includes three distinct sessions: A/E Design: A comprehensive briefing detailing project scope, facility design packages, site conditions, host-nation and DoD design standards, BIM requirements, procurement timelines, and USACE compliance guidelines. One-on-One Capability Briefings: Private, scheduled 15-minute briefings reserved for prospective A/E firms to present specialized technical and managerial capabilities directly to the USACE acquisition panel. Federal Systems Registration Support: Individual, walk-in technical assistance to help prospective firms navigate SAM.gov, Unique Entity Identifier (UEI), and NCAGE. Please note: This announcement is issued solely for market research and informational planning purposes. It does not constitute a Request for Proposals (RFP), an Invitation for Bids (IFB), or an obligation on the part of the U.S. Government. No contract award will result directly from this event. Logistics & Schedule Date: December 1, 2026 Hours: 08:30 – 4:00 PM CT/Local Lima Time Location: Centro Naval Sede San Borja Av. San Luis S/Nº Cdra. 24, Urb. San Borja Sur, Lima, Peru Daily Schedule Note: A detailed schedule of presentations, networking intervals, and allocated session times is currently being finalized. The specific daily agenda will be published in a forthcoming update to this announcement prior to the event. Event Details & Specific Sessions Session 1: A/E Seminar & Design Scope Briefing USACE engineering, project management, and contracting representatives will deliver a detailed technical presentation covering: Master planning, site layout, and architectural vision for the Callao Naval Base modernization. Design criteria, geotechnical and seismic considerations, coastal environment durability standards, and Unified Facilities Criteria (UFC). Building Information Modeling (BIM), specialized mechanical/electrical/plumbing (MEP), fire protection, environmental permitting, and host-nation building codes. Overview of the federal A/E Brooks Act selection process (FAR Part 36.6), evaluation criteria, submission requirements (Standard Form 330), and milestone schedules. Session 2: One-on-One Capability Briefings (Pre-Registration Required) Prospective A/E firms (including formal Joint Ventures and Prime Mentor-Protégé partnerships) may request a dedicated 15-minute private session with the USACE technical and acquisition panel. Objective: Market research to assess industry interest, multi-disciplinary engineering depth, regional design experience, BIM/CADD capabilities, and past performance. Availability: Time slots are limited and will be confirmed on a strictly first-come, first-served basis upon receipt and validation of the RSVP form. Session 3: Federal Systems Registration Support Throughout the day, USACE specialists will host an individual support station to assist contractors with: Firms interested in receiving support should bring a computer Navigating NATO Commercial and Government Entity (NCAGE) code applications. Obtaining a Unique Entity Identifier (UEI) and activating an account in SAM.gov. Project & Requirement Overview Project Description The contemplated acquisition covers comprehensive multi-disciplinary Architecture and Engineering (A/E) services. The scope of work encompasses: Topographic, hydrographic, and geotechnical site investigations and soil stabilization analysis. Comprehensive seismic engineering compliant with Peruvian seismic zones and DoD structural criteria. Concept development, 35% preliminary design, 65% intermediate design, and final 100% ready-to-advertise design packages and technical specifications. Multi-discipline engineering including civil, structural, architectural, MEP, specialized fire suppression, industrial ventilation, cold-chain refrigeration, and telecommunications. Environmental assessments, stormwater management planning, and host-nation regulatory compliance support. Complete Furniture, Fixtures, & Equipment (FF&E) interior design packages. Development of construction cost estimates (MII format) and construction phasing schedules. Summary of Facility Packages: Building 110 Primary Function: Spare Parts Warehouse Key Technical Considerations: Heavy-duty slab design, industrial racking integration, material handling flow, automated logistics staging. Building 115 Primary Function: Clothing & Gear Warehouse Key Technical Considerations: High-density pallet storage, humidity and climate control, inventory distribution bays. Building 112 Primary Function: Material Warehouse Key Technical Considerations: Bulk staging, overhead crane/hoist accommodations, heavy equipment ingress/egress ramps. Building 113 Primary Function: Customs Warehouse Key Technical Considerations: Secure bonded holding areas, host-nation customs inspection layout, physical security infrastructure. Building 114 Primary Function: Petroleum, Oil, and Lubricants (POL) Warehouse Key Technical Considerations: Secondary containment, explosion-proof electrical systems, specialized foam/water fire suppression, environmental drainage controls. Building 111 Primary Function: Medicine & Medical Supplies Warehouse Key Technical Considerations: Temperature/humidity-controlled storage (cold chain capability), pharmaceutical-grade clean finishings, backup power integration. Building 120 Primary Function: DIRNOTEMAT & Quality Control Building Key Technical Considerations: Administrative offices, testing and quality inspection laboratories, specialized testing benches, IT/telecom infrastructure. Site & Ancillary Works Primary Function: Infrastructure & Integration Key Technical Considerations: Site grading, structural fill, perimeter security, access roads, utility connections, complete FF&E packages, and host-nation compliant permitting. Streamlined RSVP & Venue Access Instructions Due to facility capacity constraints and military installation security protocols at Centro Naval, advance registration is mandatory. Attendance is limited to a maximum of three (3) representatives per company. To simplify the registration process, interested firms must follow this two-step procedure: Step 1 — Email Request: Send an email to Claudia Montero at Claudia.M.Montero@usace.army.mil, and cc Renee Booth, Meranda.R.Booth@usace.army.mil, and Jaclyn Yocum, Jaclyn.C.Yocum@usace.army.mil , no later than November 18, 2026, at 3:00 pm CT. Subject Line: RSVP Request: Callao Naval Base AE Industry Day (Dec 1, 2026) – [Company Name] Message Body: State your company name, point of contact, contact email address, and interest in attending Day 1 (A/E Services). Step 2 — Registration Form & Official Confirmation: Upon receipt of your email, Ms. Montero will reply with the official RSVP & Security Access Form. Complete the form (which collects attendee details, security credentials, and interest in 1-on-1 sessions or SAM.gov support) and return it via email. Upon review and clearance, Ms. Montero will issue an Official RSVP Confirmation Notice containing venue access instructions, check-in requirements, and confirmed one-on-one time slots (if requested). Event Documentation & Post-Event Postings To promote dynamic in-person dialogue and networking among prospective prime and subcontracting partners, detailed session slide decks, complete meeting agendas, and formal Q&A transcripts will not be published prior to the event. Pre-Event Distribution: Only logistical directions, security guidelines, and RSVP updates will be released prior to December 2, 2026. Post-Event Distribution: Following the conclusion of the event, the official presentation deck, the attendee directory (to facilitate joint ventures and teaming arrangements), and all formal Government answers to submitted questions will be posted publicly to SAM.gov under this Notice ID. Submission of Questions Pre-Event Questions: Email the POCs listed below. During the Event: Attendees may submit oral questions during designated Q&A periods or provide written questions on index cards distributed during registration. Post-Event Questions: Following the event, participants may submit technical and procurement inquiries via email to the points of contact listed below. All responses will be consolidated and posted publicly to SAM.gov. Federal Systems Registration (SAM.gov & PIEE) Prospective A/E firms are strongly encouraged to initiate federal vendor registrations immediately. Any resulting solicitation will incorporate FAR 52.204-7 (System for Award Management), mandating an active SAM registration at the time of proposal submission and contract award. Registration is free. Domestic (U.S.) Firms: Obtain a Unique Entity Identifier (UEI) and ensure an active record in SAM.gov. A CAGE code is assigned during registration. International / Peruvian Firms: Obtain a NATO Commercial and Government Entity (NCAGE) code: Non-NATO entities (including Peru) must register via the NATO Support and Procurement Agency (NSPA) portal: NSPA NCAGE Portal. Entities in NATO member or sponsored nations: Consult the NATO AC/135 Directory. Request a UEI through SAM.gov, ensuring company legal name and address match the NCAGE record exactly. Finalize registration on SAM.gov. Points of Contact (POCs) Claudia Montero - Administrative Management Assistant, USACE Latin America and Caribbean District Email: Claudia.M.Montero@usace.army.mil Renee Booth - Contracting Officer, USACE Latin America and Caribbean District Email: Meranda.R.Booth@usace.army.mil Jaclyn Yocum – Contracting Specialist, USACE Latin America and Caribbean District Email: Jaclyn.C.Yocum@usace.army.mil *********************************************************************************** CUERPO DE INGENIEROS DEL EJÉRCITO DE LOS EE. UU. (USACE) - DISTRITO DE AMÉRICA LATINA Y EL CARIBE NUNCIO DE DÍA DE LA INDUSTRIA - DÍA 1 — SERVICIOS DE ARQUITECTURA E INGENIERÍA (A/E) Requerimiento: Modernización de la Infraestructura de la Base Naval del Callao, Perú Agencia Cliente: Marina de Guerra del Perú ID de Aviso: W51DQV27Z1CV8 Código de NAICS: 541330 – Engineering Services Fecha del Evento: 1 de diciembre de 2026 Lugar: Centro Naval Sede San Borja, Lima, Peru Fecha limite para RSVP: 18 de noviembre de 2026, 3:00 pm hora Lima Descripción General El Cuerpo de Ingenieros del Ejército de los Estados Unidos (USACE), Distrito del Caribe, está organizando un evento del Día de la Industria en Lima, Perú, para interactuar con socios de la industria respecto a la próxima adquisición del Proyecto de Modernización de la Infraestructura de la Base Naval del Callao, Perú, y el Proyecto de Operación y Mantenimiento (O&M) de NAMRU-S. Con el fin de proporcionar un enfoque específico para los distintos sectores de la industria, el evento se estructura en tres días especializados: Día 1 (Martes 1 de diciembre de 2026): Proyecto de Modernización de la Infraestructura de la Base Naval del Callao, Perú — Servicios de Arquitectura e Ingeniería (A/E) (NAICS 541330) Día 2 (Miércoles 2 de diciembre de 2026): Proyecto de Modernización de la Infraestructura de la Base Naval del Callao, Perú — Construcción (NAICS 236220) Día 3 (Jueves 3 de diciembre de 2026): Unidad de Investigación Médica de la Marina de los EE. UU. Sur (NAMRU-S) Lima e Iquitos, Perú — Servicios de Operación y Mantenimiento (O&M) de Instalaciones (NAICS 561210) Este anuncio cubre específicamente el Día 1 (Servicios de A/E). Existen anuncios separados para el Día 2 (Construcción) y el Día 3 (Operación y Mantenimiento de Instalaciones). Propósito del Evento El propósito es presentar los requerimientos planificados de Arquitectura e Ingeniería (A/E) en apoyo a la modernización de las instalaciones portuarias y terrestres en la Base Naval del Callao, informar a las posibles firmas de diseño principales y consultores especializados sobre los criterios de ingeniería de USACE y los estándares de contratación federal de los EE. UU., brindar orientación técnica directa para el registro de proveedores federales, y llevar a cabo sesiones individuales privadas de presentación de capacidades para investigación de mercado. Resumen de las Sesiones El programa incluye tres sesiones distintas: Diseño de A/E: Una sesión informativa detallada sobre el alcance del proyecto, paquetes de diseño de instalaciones, condiciones del sitio, estándares de diseño de la nación anfitriona y del Departamento de Defensa (DoD), requerimientos BIM, cronogramas de adquisición y pautas de cumplimiento de USACE. Sesiones Individuales de Capacidades (One-on-One): Reuniones privadas y programadas de 15 minutos reservadas para que las firmas de A/E interesadas presenten directamente sus capacidades técnicas y de gestión especializadas ante el panel de adquisiciones de USACE. Soporte para el Registro en Sistemas Federales: Asistencia técnica individual presencial para ayudar a las firmas interesadas a navegar en SAM.gov, Identificador Único de Entidad (UEI) y NCAGE. Nota: Este anuncio se emite únicamente con fines de investigación de mercado y planificación informativa. No constituye una Solicitud de Propuestas (RFP), una Invitación a Licitación (IFB), ni una obligación por parte del Gobierno de los EE. UU. No se adjudicará ningún contrato directamente como resultado de este evento. Logística e Itinerario Fecha del Evento: miércoles 1 de diciembre de 2026 Hora: 08:30 – 4:00 PM CT/ Hora Lima Ubicación: Centro Naval Sede San Borja, Av. San Luis S/Nº Cdra. 24, Urb. San Borja Sur, Lima, Perú Nota sobre el Itinerario Diario: Actualmente se está finalizando un cronograma detallado de las presentaciones, intervalos de networking y tiempos asignados para las sesiones. La agenda diaria específica se publicará en una actualización próxima a este anuncio antes del evento. Detalles del Evento y Sesiones Específicas Sesión 1: Seminario de A/E e Informativa del Alcance del Diseño Representantes de ingeniería, gestión de proyectos y contratación de USACE ofrecerán una presentación técnica detallada que cubrirá: Planificación maestra, distribución del sitio y visión arquitectónica para la modernización de la Base Naval del Callao. Criterios de diseño, consideraciones geotécnicas y sísmicas, estándares de durabilidad en entornos costeros y Criterios Unificados de Instalaciones (UFC). Modelado de Información de Construcción (BIM), sistemas especializados de mecánica/electricidad/plomería (MEP), protección contra incendios, permisos ambientales y códigos de construcción de la nación anfitriona. Descripción general del proceso federal de selección de A/E bajo la Ley Brooks (FAR Parte 36.6), criterios de evaluación, requisitos de presentación (Formulario Estándar 330) y cronogramas de hitos. Sesión 2: Sesiones Individuales de Capacidades (Se requiere registro previo) Las firmas de A/E interesadas (incluidas las asociaciones en participación (Joint Ventures) formales y alianzas Mentor-Protégé) pueden solicitar una sesión privada dedicada de 15 minutos con el panel técnico y de adquisiciones de USACE. Objetivo: Investigación de mercado para evaluar el interés de la industria, la capacidad de ingeniería multidisciplinaria, la experiencia de diseño regional, las capacidades en BIM/CADD y el historial de desempeño. Disponibilidad: Los cupos son limitados y se confirmarán en estricto orden de llegada tras la recepción y validación del formulario RSVP. Sesión 3: Soporte para el Registro en Sistemas Federales Durante el día, especialistas de USACE dispondrán de una estación de soporte individual para ayudar a los contratistas con: Navegación y solicitud del código de Entidad Comercial y Gubernamental de la OTAN (NCAGE). Obtención del Identificador Único de Entidad (UEI) y activación de la cuenta en SAM.gov. Importante: Las firmas interesadas en recibir soporte deben traer una computadora portátil. Descripción General del Proyecto y Requerimientos Descripción del Proyecto La adquisición contemplada cubre servicios integrales multidisciplinarios de Arquitectura e Ingeniería (A/E). El alcance del trabajo incluye: Investigaciones topográficas, hidrográficas y geotécnicas del sitio, y análisis de estabilización de suelos. Ingeniería sísmica integral que cumpla con las zonas sísmicas peruanas y los criterios estructurales del DoD. Desarrollo de conceptos, diseño preliminar al 35%, diseño intermedio al 65%, y paquetes de diseño final al 100% listos para licitación con especificaciones técnicas. Ingeniería multidisciplinaria que incluye civil, estructural, arquitectónica, MEP, supresión de incendios especializada, ventilación industrial, refrigeración de cadena de frío y telecomunicaciones. Evaluaciones ambientales, planificación del manejo de aguas pluviales y apoyo para el cumplimiento regulatorio con la nación anfitriona. Paquetes completos de diseño de interiores para Mobiliario, Accesorios y Equipamiento (FF&E). Desarrollo de estimaciones de costos de construcción (formato MII) y cronogramas de fases de construcción. Resumen de Paquetes de Instalaciones A continuación, se detallan los edificios e infraestructura contemplados en el alcance del diseño: Edificio 110 - Almacén de repuestos Diseño de losas de alta resistencia, integración de estanterías industriales, flujo de manejo de materiales, área de preparación logística automatizada. Edificio 115 - Almacén de Ropa y Equipamiento Almacenamiento de palets de alta densidad, control de humedad y climatización, bahías de distribución de inventario. Edificio 112 - Almacén de Materiales Almacenamiento a granel, adecuación para grúas pórtico/polipastos superiores, rampas de ingreso/egreso para equipos pesados. Edificio 113 - Almacén de aduana Áreas de retención aduanera seguras, diseño para inspección de aduanas locales, infraestructura de seguridad física. Edificio 114 - Almacén de Petróleo, Aceites y Lubricantes — POL Contención secundaria, sistemas eléctricos a prueba de explosiones, sistemas especializados de supresión de incendios por espuma/agua, controles de drenaje ambiental. Edificio 111 - Almacén de Medicinas y Suministros Médicos Almacenamiento con control de temperatura y humedad (capacidad de cadena de frío), acabados limpios de grado farmacéutico, integración de energía de respaldo. Edificio 120 - Edificio de DIRNOTEMAT y Control de Calidad Oficinas administrativas, laboratorios de prueba e inspección de calidad, bancos de prueba especializados, infraestructura de TI y telecomunicaciones. Obras del Sitio y Auxiliares - Infraestructura e integración Nivelación del terreno, relleno estructural, seguridad perimetral, vías de acceso, conexiones de servicios públicos, paquetes completos de FF&E y tramitación de permisos de acuerdo con la normativa de la nación anfitriona. Instrucciones para RSVP y Acceso al Lugar del Evento Debido a las limitaciones de capacidad de las instalaciones y a los protocolos de seguridad militar en el Centro Naval, el registro previo es obligatorio. La asistencia está limitada a un máximo de tres (3) representantes por empresa. Para simplificar el proceso de registro, las firmas interesadas deben seguir este procedimiento de dos pasos: Paso 1 — Solicitud por Correo Electrónico: Envíe un correo electrónico a Claudia Montero, Claudia.M.Montero@usace.army.mil), con copia a Renee Booth Meranda.R.Booth@usace.army.mil, y Jaclyn Yocum, Jaclyn.C.Yocum@usace.army.mil, a más tardar el 18 de noviembre de 2026 a las 3:00 pm CT. Línea de Asunto: RSVP Request: Callao Naval Base AE Industry Day (Dec 1, 2026) – [Nombre de la Empresa] Cuerpo del Mensaje: Indique el nombre de su empresa, punto de contacto, correo electrónico de contacto y su interés en asistir al Día 1 (Servicios de A/E). Paso 2 — Formulario de Registro y Confirmación Oficial Al recibir su correo, la Sra. Montero responderá con el Formulario Oficial de RSVP y Acceso de Seguridad. Complete el formulario (que recopila detalles de los asistentes, credenciales de seguridad e interés en sesiones 1 a 1 o soporte para SAM.gov) y devuélvalo por correo electrónico. Tras la revisión y aprobación, la Sra. Montero emitirá un Aviso de Confirmación de RSVP Oficial que contendrá las instrucciones de acceso al lugar, los requisitos de registro de entrada y los horarios de las sesiones individuales (si fueron solicitadas). Documentación del Evento y Publicaciones Posteriores Para promover un diálogo presencial dinámico y el networking entre los posibles socios principales y subcontratistas, no se publicarán las presentaciones detalladas de las sesiones, las agendas completas ni las transcripciones oficiales de preguntas y respuestas antes del evento. Distribución Previa al Evento: Solo se publicarán las indicaciones logísticas, las pautas de seguridad y las actualizaciones de RSVP antes del 2 de diciembre de 2026. Distribución Posterior al Evento: Tras la conclusión del evento, la presentación oficial, el directorio de asistentes (para facilitar consorcios y acuerdos de equipo) y todas las respuestas gubernamentales formales a las preguntas presentadas se publicarán en SAM.gov bajo este ID de Anuncio. Envío de Preguntas Preguntas Previas al Evento: Envíe un correo electrónico a los puntos de contacto (POC) enumerados abajo. Durante el Evento: Los asistentes podrán formular preguntas verbales durante los periodos designados para preguntas y respuestas o entregar preguntas por escrito en tarjetas que se distribuirán durante el registro. Preguntas Posteriores al Evento: Después del evento, los participantes podrán enviar consultas técnicas y de adquisiciones por correo electrónico a los puntos de contacto indicados. Todas las respuestas se consolidarán y se publicarán en SAM.gov. Registro en Sistemas Federales (SAM.gov y PIEE) Se recomienda a las firmas de A/E interesadas que inicien de inmediato sus registros como proveedores federales. Cualquier solicitud resultante incorporará la cláusula FAR 52.204-7 (System for Award Management), que exige un registro activo en SAM al momento de presentar la propuesta y de la adjudicación del contrato. El registro es gratuito. Firmas Locales (EE. UU.): Obtener un Identificador Único de Entidad (UEI) y asegurar un registro activo en SAM.gov. El código CAGE se asigna automáticamente durante el registro. Firmas Internacionales / Peruanas: Obtener un código de Entidad Comercial y Gubernamental de la OTAN (NCAGE): Las entidades no pertenecientes a la OTAN (incluyendo al Perú) deben registrarse a través del portal de la Agencia de Apoyo y Adquisiciones de la OTAN (NSPA): Portal NSPA NCAGE. Entidades en naciones miembros o patrocinadas por la OTAN: Consultar el Directorio AC/135 de la OTAN. Solicitar un UEI a través de SAM.gov, asegurando que el nombre legal y la dirección de la empresa coincidan exactamente con el registro NCAGE. Finalizar el registro en SAM.gov. Puntos de Contacto (POCs) Para cualquier consulta relacionada con este evento, por favor comuníquese con los siguientes representantes: Claudia Montero - Asistente de Gestión Administrativa, Distrito de América Latina y el Caribe de USACE Correo Electrónico: Claudia.M.Montero@usace.army.mil Renee Booth - Oficial de Contrataciones, Distrito de América Latina y el Caribe de USACE, Correo Electrónico: Meranda.R.Booth@usace.army.mil Jaclyn Yocum - Especialista en Contrataciones, Distrito de América Latina y el Caribe de USACE Correo Electrónico: Jaclyn.C.Yocum@usace.army.mil | - | Special Notice | 11/18/2026 |
| - | Awarded | Open |
Additional Details
Solicitation Number
W912QR23R0021
Archive Date
Not specified
Office Address
LOUISVILLE, KY, 40202-2230