GovChime
Notice ID: 93b5b445f285470e8c5f40f36962f29aSolicitation

Fox Point Hurricaine Barrier: Rehabilitate Gates

Archived on September 15, 2020. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
1:00 PM UTC−04:00
Posted
September 1, 2020
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
Agency
Department of WarDepartment of the Army

Notice details

Office
W2SD ENDIST NEW ENGLAND
Place of performance
Providence, RI
Last updated
Apr 29, 2026

Identifiers

Solicitation number
W912WJ20B0010
Notice ID
93b5b445f285470e8c5f40f36962f29a

Description

The U.S. Army Corps of Engineers, New England District is issuing an Invitation for Bid (IFB) solicitation for the Rehabilitation of Canal Gates and Stop Gates at Fox Point Hurricane Barrier, Providence, Rhode Island. This procurement is set aside for small business concerns. THE BID SUBMISSION TIME IS 1:00 PM EST. THE BID OPENING TIME IS 2:00 PM EST. See solicitation for bid submission instructions. The solicitation will only be available online; in order to download the solicitation, offerors must access the Contract Opportunities at beta.SAM.gov. All responsible sources may submit a proposal which shall be considered by the New England District.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:W912WJ20B0010
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. 2×
    Pre-SolicitationMay 26, 2020

    Fox Point Hurricaine Barrier: Rehabilitate Gates

    Notice 41b864d6864a4804a8e333d8b5832081 on SAM.gov

  2. 8×
    SolicitationCurrentJul 24, 2020

    Fox Point Hurricaine Barrier: Rehabilitate Gates

    Notice 93b5b445f285470e8c5f40f36962f29a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The U.S. Army Corps of Engineers - New England District is issuing a Solicitation Notice for Dike B Generator Installation, Mansfield Hollow Dam, Mansfield Center, CT. THE WORK CONSISTS OF: The Contractor shall furnish all necessary materials, equipment, and labor required to construct and commission a new power system for the Dike B Operator unit. The scope of work involves comprehensive site preparation to support the construction of a reinforced concrete generator pad and the installation of secure perimeter fencing. The Contractor is responsible for the procurement and installation of a standalone, propane-powered generator and a corresponding propane fuel storage tanks. Following the physical installation, the Contractor shall execute all final electrical connections and integration into the existing sluice gate operator unit and control panel. All work shall comply with all applicable federal laws and codes, and shall be completed in accordance with the Statement of Work. This procurement is set-aside for small business vendors. The applicable NAICS code is 238290 with a Small Business Size Standard of $22 Million. ALL VENDORS MUST HAVE AN ACTIVE REGISTRATION IN SAM.GOV AT THE TIME OF SUBMISSION IN ORDER TO BE CONSIDERED. ANY VENDOR THAT DOES NOT HAVE AN ACTIVE SAM.GOV REGISTRATION WILL BE REJECTED AS NON RESPONSIVE.
54%
Solicitation11/18/2026
The response date has been extended to 20 July 2026 at 12:00 p.m. CDT. The Phase I attachment documents have been amended to remove the CUI header and Source Selection Information Footer on the Phase I Attachments. See line-outs. The Site Visit Location address has been amended to:29564 POWERHOUSE RD, WARSAW, MO 65355A Site Visit has been added for Phase I. THE SITE VISIT IS SCHEDULED FOR 30 JUNE 2026 AT 10:00 A.M. CDTLOCATION: 29564 POWERHOUSE RD, WARSAW, MO 6535538.261350, -93.405858POC: HOWARD R. JOHNSON IIIEMAIL: HOWARD.R.JOHNSON@USACE.ARMY.MILTELEPHONE: (816) 938-856Prospective offerors shall submit contracting and technical inquiries and questions concerning this solicitation document via Bidder Inquiry in ProjNet at www.projnet.org/projnetThe Bidder inquiry date has changed to 7 July 2026, 12:00 PM, local Kansas City time; the system will be unavailable for new inquiries after this date and time.The Proposal date has been extended to 14 July 2026 at 12:00 PM CDT.HARRY S. TRUMAN DAM POWERHOUSE ELEVATOR REPLACEMENT WARSAW, MISSOURIHST Elevator Replacement - Design Build The purpose of this project is to demolish the existing electric traction service elevator at Truman Powerhouse in Warsaw, Missouri and provide and install a new electric traction service elevator, new circuits, and new controls. All equipment/materials provided by the contractor shall be new. The elevator shall be Class C1 with a load rating of 4,500 lbs. or higher. The site visit will be scheduled during Phase 2 of this solicitation. The Government requires performance of the work described in the Statement of Work (SOW), specifications, and drawings. The contract award amount (inclusive of all contract line items (CLINs)) shall not exceed $2,400,000.00 for this project. Offerors are under no obligation to approach this amount.
54%
Solicitation07/20/2026
Title: LLA Navigation Lock Switchgear Replacement: The work is located at the Lower Granite Dam, Pomeroy, Washington. The solicitation will be issued as a Best Value Trade-Off (BVTO) Request for Proposal (RFP) and result in a single firm-fixed price construction contract. This procurement is a small business set aside. 100% Performance and payment bonds will be required for this project. The North American Industry Classification System (NAICS code for this project is 238210 Electrical Contractors and Other Wiring Installation Contractors and the associated small business size standard is $19 million. Solicitation number W912EF27RA002 will be posted to the SAM.gov Contract Opportunities website on or about mid November 2026. The proposal due date will be contained in the solicitation and any solicitation amendments that may be issued. The solicitation will be made available for download on the SAM.gov Contract Opportunities website. Offerors are responsible for checking the referenced page for any updates to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the documents posted at the referenced website. Proposals will be due approximately 30 days after the solicitation is posted. The exact proposal due date will be indicated in the solicitation. System for Award Management (SAM): Offerors must register in the SAM at https://sam.gov/content/home prior to receiving an award. NOTE: The response date that is required to post this notice is not in any way a due date for any submission. This is a pre-solicitation notice only. Scope: The scope of the work involves replacing existing medium and low voltage switchgear lineups and their associated feeder cables with modernized medium and low voltage switchgear and motor control center lineups at Lower Granite Dam Navigation Lock. The main features of work includes: Provide and install one (1) new medium voltage switch gear. Provide and install one (1) new low voltage switch gear. Provide and install two (2) new motor control center lineups. Provide modernized controls for existing electrical loads. Provide one (1) new 4,160/480-V 1,000 kVA transformer. Provide lighting load centers to replace existing panels. Provide new concrete housekeeping pads for new electrical equipment. Provide new cable trays and conduits where required by circuit reconfigurations and to bring fill ratios to levels that meet electrical codes. Provide an HMI screen to replace an existing annunciator panel. Demolish existing medium and low voltage switchgear, motor controls centers, and transformers. Demolish the existing 480VAC feeders routed from existing low voltage switchgear and motor control centers. Seal hatch and any expansion joints, or cracks, to prevent water intrusion in an existing electrical room. This work is anticipated to be performed in 2028 and 2029, with cutover power construction work being completed during the 2028 and 2029 navigation lock outages. Access to the navigation lock deck and electrical substation rooms will be available for workers and equipment. THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THE SOLICITATION EITHER BEFORE OR AFTER THE CLOSING DATE. NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS PRE-SOLICITATION NOTICE OR ANY FOLLOW-UP INFORMATION REQUEST. All on-site work shall be performed in accordance with the Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1). Establish and manage an effective on-site Safety and Health program in accordance with EM 385-1-1 that will require the development and submission of a comprehensive project specific Accident Prevention Plan for Government acceptance. In addition, develop and submit for Government acceptance Activity Hazard Analyses for each phase of work and a project specific Fall Protection Plan that comply with EM 385-1-1. A Site Safety and Health Officer (SSHO) employed by the prime contractor is required for each shift of the contractor's on-site operations. The SSHO shall possess a minimum of 5-years’ experience in construction safety on similar projects, shall have completed the 30-Hour OSHA Construction Safety training within the last 5 years, and shall have completed at least 24 hours of safety training from accredited safety training sources each year for the past 5 years. Establish and manage an effective Contractor Quality Control (CQC) System that will require the development and submission of a comprehensive project specific CQC Plan for Government acceptance. A CQC System Manager employed by the prime contractor is required to be on-site for each shift of the Contractor's operations. The CQC System Manager must possess a minimum of 5 years relevant experience in a supervisory or management position such as Quality Control Manager, Quality Assurance Manager, or Construction Manager directly involved in the management of construction quality at the project site. In addition, the CQC System Manager shall have completed the course entitled “Construction Quality Management for Contractors” within the last 5 years. Use the Government-furnished Resident Management System (RMS) – Contractor Mode to record, maintain, and submit various information throughout the contract period. RMS is a Windows-based program capable of operating on a stand-alone personal computer or on a network. The Government will make the quality control system (QCS) software available to the Contractor at time of notice to proceed. The project involves the development and management of Contractor furnished submittals for items such as pre-construction plans, product data, test reports, and contract close-out documentation as required by the technical specifications of the contract. Miscellaneous work within the project includes the delivery of As-Built Drawings, O&M Manuals, Contractor- Prepared Shop Drawings, and spare parts to the customer. Solicitation Number W912EF27RA002 will be posted to the SAM.gov approximately on around mid to late November 2026. The solicitation is a Request for Proposal Important Note: The SAM.gov Contract Opportunities Response Date listed elsewhere in this synopsis is for SAM.gov archive purposes only. It does not necessarily reflect the actual proposal due date. There is no response date included in this notice. The proposal due date and time will be contained in the solicitation and any solicitation amendments that are issued. Anticipated Award date is early to mid-March 2027. A site visit will be offered approximately 2 weeks after the solicitation is made available to offerors. See solicitation for details about the site visit. ACCESS FOR FOREIGN NATIONALS: Security clearance for foreign nationals to attend a site visit requires approximately 4 weeks; therefore, clearance should be requested immediately. To request clearance, please submit the names of all foreign nationals proposed for site visit attendance, along with documentation to verify that he/she was legally admitted into the United States and has authority to work and/or go to school in the US. Such documentation may include a US passport, Certificate of US citizenship (INS Form N-560 or N-561), Certificate of Naturalization (INS Form N-550 or N-570), foreign passport with 1-551 stamp or attached INS Form 1-94 indicating employment authorization, Alien Registration Receipt Card with photograph (INS Form 1-151 or 1-551), Temporary Resident Card (INS Form 1-688}, Employment Authorization Card (INS Form l-688A}, Reentry Permit (INS Form 1-327}, Refugee Travel Document (INS Form 1-571}, Employment Authorization Document issued by the INS which contains a photograph (INS Form I-688B}. Send this information by email to leanne.r.walling@usace.army.mil and jani.c.long@usace.army.mil Foreign nationals must have received clearance prior to being granted access to the project site.
42%
Pre-Solicitation11/13/2026
This acquisition is for a a non-personal services contract to provide facility maintenance services and certain related facility management services at Fort Hood to include operation, preventative maintenance (PM) and corrective maintenance (CM) service (M and S) for approximately 136 automatic doors, 3,375 overhead doors (some hangers), and commercial doors for preventative and corrective (on demand) maintenance at the Fort Hood Army Installation, Fort Hood, Texas. This requirement also includes certain facility management and support services, as defined in this PWS, at US Army Garrison Fort Hood. The Contractor shall provide required PM and (CM) services in compliance with all code; criteria; regulations; and Federal, State, and local laws. All work shall be performed at Fort Hood, Texas, which consists of the Main Cantonment, West Fort Hood, and all areas under the control of Fort Hoods Installation or Installation considered Real Property. AMENDMENT 1: The purpose of amendment 1 is to incorporate site visit information detail. Location: FT Hood, TX. Date: 6 August 2026 Time: 1:30 PM CST. Attachments enclosed. AMENDMENT 2: Extend proposal due date to 14 August 2026, 1:00 PM CST (Posted to GPE/Sam.gov on 7 Aug 2026). AMENDMENT 3: The purpose of amendment 3 is to incorporate revised documents. Please see the updated Solicitation Amendment 3 for details. AMENDMENT 4: The purpose of amendment 4 is to communicate revisions to the evaluation factors detailed in RFO 52.212-2, Evaluation-Commercial Products and Commercial Services. (Deviation 2026-O0038). Please see updated solicitation attachment: Solicitation Amendment 4_W912DY26RA0760001_12 Aug.
42%
AwardedOpen
CSS Project #99178 - Install Facility Lightning Protection System in Morgantown, WV (WV029)
42%
Solicitation09/23/2026

Additional Details

Solicitation Number

W912WJ20B0010

Archive Date

Sep 15, 2020

Office Address

CONCORD, MA, 01742-2751