Notice ID: 1b7ac19f88b210341001b9899fa137e0Award NoticeAwarded
Two Rail-Mounted Industrial Grade Robotic Manipulator Arms (1 Large and 1 Small) for Use in Automated Construction Research - Kuka Brand or equal
Awarded on September 29, 2017. Full description on SAM.gov.
Awarded tounder W9132T17P0067 (source: SAM.gov award notice)• $258.5K
Overview
- Posted
- October 2, 2017
- Notice type
- Award Notice
- NAICS
- Unknown NAICS (as reported): 333999
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W2R2 CONST ENGRG LAB
- Place of performance
- 2902 Newmark Dr, Champaign, IL, 61822
- PSC
- 38: CONSTRUCT/MINE/EXCAVATE/HIGHWY EQPT
- Last updated
- Dec 5, 2025
- Award date
- Sep 29, 2017
- Award amount (SAM.gov award notice)
- $258.5K
Identifiers
- Solicitation number
- W9132T17T0077
- Notice ID
- 1b7ac19f88b210341001b9899fa137e0
- Award number (PIID)
- W9132T17P0067
Description
`Synopsis/Solicitation: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation: quotes are being requested and a written solicitation will not be issued. The solicitation number is W9132T17T0077 and is being issued as a request for quotation (RFQ). The associated North American Industry Classification System (NAICS) code is 333999, All Other Miscellaneous General Purpose Machinery Manufacturing, size standard 500 employees. The U.S. Army Engineer Research and Development Center (ERDC), Construction Engineering Research Laboratory (CERL) has a requirement to procure Two (2) Kuka brand name or equal rail-mounted industrial grade robotic manipulator arms - one large, and one small - for use in automated construction research delivered to Engineer Research and Development Center, Construction Engineering Research Laboratory (ERDC-CERL), Champaign, Illinois. The large robotic manipulator arm would be used for the purpose of developing large scale three-dimensional (3D)-printing techniques. The small robotic manipulator arm would be used for the purpose of testing out the 3D-printing code developed in-house and doing development of 3D-printing at a smaller scale. Both arms shall be capable of being optionally mounted in fixed configurations. Please reference the attached written RFQ for specifications and all applicable provisions and clauses. Please provide responses to this notice no later than 18 September 2017 at 11:59 AM, Central Standard Time (CST), to: CERL-CT-QUOTES@usace.army.mil Telephone responses will not be accepted. *Note: In order to be eligible for award of a Government contract, vendors must be actively registered in the System for Award Management (SAM), have no active exclusions, and complete representations and certifications. This system combines data that was formerly contained in the Central Contractors Registration (CCR), Online Representation and Certifications (ORCA), and the Excluded Parties List System (EPLS). For more information, review the SAM website at https://www.sam.gov.
Award Overview
Award Number
W9132T17P0067
Award Amount (SAM.gov award notice)
$258.5K
Award Date
Sep 29, 2017
Awardee
Original Solicitation
Notice ID: 1b7ac19f88b210341001b9899fa137e0
Posted Date: Oct 2, 2017
Original Response Deadline: Not specified
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W9132T17T0077- Combined Synopsis
- Awarded
This opportunity has been awarded.
- 5×Combined SynopsisSep 7, 2017
Two Rail-Mounted Industrial Grade Robotic Manipulator Arms (1 Large and 1 Small) for Use in Automated Construction Research - Kuka Brand or equal
- AwardedCurrentOct 2, 2017
Two Rail-Mounted Industrial Grade Robotic Manipulator Arms (1 Large and 1 Small) for Use in Automated Construction Research - Kuka Brand or equal
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Rock Island Arsenal has a requirement for the following item. The Government intends to make a firm fixed price (FFP) award to the lowest priced, responsive, responsible vendor whose quote, conforms to the RFQ requirements and represents the lowest total evaluated price. Discussions are not anticipated. Payment will be completed via Wide Area Work Flow (WAWF) Quote must include shipping to Rock Island Arsenal, IL 61299 Site Visit is set for November 10th, 2026 at 10 AM Central Standard Time Quotes are due by 6 PM, November 27, 2026 Certificate of Conformance in required | 46% | Combined Synopsis | 11/27/2026 |
Industrial Kitchen Equipment | 45% | Combined Synopsis | 12/24/2025 |
PLEASE NOTE: TWO ADDENDUMS HAVE BEEN INCORPORATED INTO THIS SOLICITATION AND THE CONTRACTING OFFICER HAS CHANGED. PLEASE PROVIDE ONE SIGNED COPY OF ALL RELATED ADDENDUMS WITH ANY FINAL PROPOSAL. CHANGES IN BOLD BELOW. More documentation to follow. Argonne National Laboratory (ANL) seeks a Supplier to design, fabricate, deliver, support installation, and commission a custom industrial furnace for R&D testing of fuel-flexible burners using natural gas and hydrogen blends from 0–100% H₂. The furnace shall support direct-fired and indirect-fired burner configurations and meet all requirements in the attached Statement of Work, including performance, facility interfaces, applicable codes, and safety requirements. Award will be made on a BEST VALUE basis. Technical acceptability will be evaluated on AN ADJECTIVAL SCALE. BUSINESS PROPOSALS WILL BE EVALUATED ON PASS/FAIL. Among responsible offerors determined technically acceptable and compliant with solicitation requirements, ANL will award to the offeror with the best overall value, where the Technical Proposal is of greater importance to the Price Proposal and Business Management Proposal. Offerors shall submit: Completed proposal that meets the requirements stated in the Request for Proposal Document Technical Proposal, Business/Management Proposal, and Price Proposal Country of Origin information for the furnace and major components. Lead time from PO through final delivery, FOB Destination, Lemont, IL 60439, including major design, fabrication, delivery, and commissioning milestones. Completed and signed ANL-70B Representations and Certifications. Any proposed exceptions or deviations. All proposal documentation requested under Best Value Evaluation Criteria (Enclosure 3) Offers that do not meet mandatory requirements or do not provide adequate supporting documentation may be found technically unacceptable. Country of Origin shall be provided in accordance with FAR 52.225-1, Buy American—Supplies. Please direct questions to the Contracting Officer. Thank you in advance for your participation. | 42% | Solicitation | 12/01/2026 |
This synopsis is for informational purposes only. This is not a request for quote and no solicitation exists. The Mission & Installation Contracting Command (MICC), Fort Drum, NY is seeking multiple businesses willing to enter into a Blanket Purchase Agreement (BPA) for supplies under North American Industry Classification System Code (NAICS) 333998: All Other Miscellaneous General Purpose Machinery Manufacturing. The small business size standard for this industry is 700 employees. The Contractor shall supply general hardware and lumber items for the Department of Public works on Fort Drum NY. The Contractor must be located within a 30 mile radius of Fort Drum. The Contractor must be able to accept the Government Purchase Card (GPC). Calls over the $10,000 limit may be paid through Wide Area Workflow (WAWF). To register and access WAWF, go to https://wawf.eb.mil/. There will be times when the Government will utilize Unison Global in order to compete the calls. The Contractor shall register with Unison Global once the Master Blanket Purchase Agreement is signed. The website to register is http://www.unisonglobal.com/, email:info@fedbid.com, phone: 877-933-3243 BPAs will be evaluated annually and may remain in place for up to five years. When establishing these BPAs the Government will consider: Price; Socio-economic status; past performance, where past performance information exists; and technical capabilities. As prescribed in FAR 52.204-7, interested parties must be registered and current in the System for Award Management (SAM), representations and certifications must also be on record. These registrations can be done through the System for Award Management (SAM) for free at http://www.sam.gov/portal/public/SAM/. SAM registration must be complete prior to entering into a BPA. Any interested party may inquire with the following Contract Specialists via email: samara.e.johnson.civ@army.mil, jeffery.l.frans.civ@army.mil, and ernie.a.ixtlahuac.civ@army.mil. Any correspondence relating to this synopsis should have “Hardware BPA" notated in the subject field and shall be emailed to every contract specialist listed in this notice and include the following: Unique Entity ID (UEI) CAGE Code Tax ID Number POC’s name, physical address, email address, and telephone number Website address (if applicable) Small business size, socioeconomic categories, and type of ownership for the organization | 39% | Market Research | 01/16/2027 |
Building Filters / Submission Requirements and Technical Compliance - Submission Method: Only bids submitted through the official solicitation portal will be accepted. Emailed submissions will not be considered.Brand Name or Equal: This solicitation is brand name or equal. If quoting an equal product, the bidder must demonstrate that the product meets or exceeds all salient physical, functional, or performance characteristics listed in the description.Mandatory Documentation: A completed Buy American form is required. Bids submitted without a completed form may be deemed non-responsive and rejected.Shipping and Invoicing: Prices must include all shipping, packaging, and inspection charges. A single shipment and invoice are required. Multiple shipments require prior written approval from the WDTC S2P2 Point of Contact (POC). | 39% | Combined Synopsis | 11/16/2026 |
Additional Details
Solicitation Number
W9132T17T0077
Archive Date
Oct 14, 2017
Office Address
CHAMPAIGN, IL, 61822-1072