GovChime
Notice ID: 0f206c8bd8bb4f6b9543089490be7ca0Combined Synopsis/Solicitation

Large Capacity HotBox Testing Chamber

Archived on June 12, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−05:00
Posted
May 7, 2024
Notice type
Combined Synopsis/Solicitation
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W2R2 CONST ENGRG LAB
Place of performance
Champaign
Last updated
Sep 25, 2026

Identifiers

Solicitation number
W9132T24Q0021
Notice ID
0f206c8bd8bb4f6b9543089490be7ca0

Description

Amendment 01 to this solicitation has been added. This amendment is to extend the delivery dates for CLINS 0001 and 0002, as well as update the corresponding delivery expectations in section C. _____________________________________________________________ The United States Army Corps of Engineers (USACE) Engineering Research and Development Center - Construction Engineering Research Laboratory (ERDC-CERL) in Champaign, IL has a requirement for purchase and delivery of a customized Hotbox chamber unit to be utilized for heat transfer measurement to increase testing capabilities for the CERL 3D printing program. This is a combined synopsis/solicitation for commercial products in accordance with the procedures of FAR Part 12. Please review the attached solicitation document in full, however specific attention is called to Sections C & F, where full detail of the requirement is given, and to Section L which provides proposal content instructions. Information on the proposed technical approach and relevant experience are requested in proposal submissions. The deadline for questions on this solicitation is 15 May 2024, as the solicitation will close on 28 May 2024. For all questions received from interested parties, an official question and answer document will be added as an attachment to this solicitation so that the answers given are shared to the maximum extent. Any questions or proposal submissions in response to this solicitation shall be sent to: CERL-CT-QUOTES@usace.army.mil Telephone responses will not be accepted.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:W9132T24Q0021
  1. Combined Synopsis
  1. 2×
    Combined SynopsisCurrentApr 26, 2024

    Large Capacity HotBox Testing Chamber

    Notice 0f206c8bd8bb4f6b9543089490be7ca0 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
NOTICE OF INTENT TO SOLE SOURCE AND IS RESTRICTED TO SUPER SYSTEMS INC. CAGE: 3DYS7 / UEI: TK4EB1EKHDN3 Contractor Address: 7205 Edington DR, Cincinnati, Ohio, 45249-1064, United States Requirement: MAINTENANCE - ELECTRICAL PIT FURNANCE #37 SERVICE & Parts Upgrade Purpose: To have Super Systems Incorporated provide a complete electrical controls upgrade with Super System INC. proprietary controls and software to communicate with existing SKADA Super Data System already installed in Heat Treat Forge, for recording and monitoring purposes, flow rack upgrade, and an updated electrical drawing packet for Electrical Pit Furnace. *This is a notice of intent to sole source to Super Systems INC. due to proprietary control and OEM capability, which is restricted to Super Systems INC. only.*
-Special Notice11/10/2026
This Notice is a continuation of Notice ID W912P627QA001.Description of Requirement: The U.S. Army Corps of Engineers, Chicago District, intends to establish a firm-fixed-price purchase order on a sole-source basis to Innovasea Systems Inc. (UEI: L4M7A3Q5N9K1, NCAGE: L0683) of Bedford, Nova Scotia, Canada. The requirement is for the procurement of proprietary VEMCO-brand acoustic telemetry equipment. The specific items required include but are not limited to: NexTrak R1 Transponding Acoustic Receiver with battery; VR2Tx-69kHz Coded Acoustic Receiver with Transponder; and VR100 Surface Transponder and Manual Tracking Acoustic Receiver. This equipment is essential for the continuation of a 14-year-long Invasive Carp Monitoring and Response Plan and must be fully compatible and interoperable with the existing VEMCO telemetry network deployed in the Chicago Area Waterways (CAWS) and Illinois Waterway (IWW). Authority: This acquisition is being conducted under the authority of Federal Acquisition Regulation (FAR) 13.101(b) , which allows for soliciting from a single source if the contracting officer determines that only one source is reasonably available to satisfy agency requirements. Justification: This equipment is essential for the continuation of the 14-year-long Invasive Carp Monitoring and Response Plan. The existing telemetry network, valued at over 500,000 USD, is comprised exclusively of VEMCO-brand equipment, which is proprietary to Innovasea Systems Inc. The several thousand ultrasonic transmitters already deployed in the river by USACE and its key agency partners (including the U.S. Fish and Wildlife Service, Southern Illinois University, and the U.S. Geological Survey) can only be detected and decoded by VEMCO receivers. Innovasea owns the patent to this technology. Procuring equipment from any other source would render the entire existing network inoperable and jeopardize the multi-million-dollar federal program. Therefore, Innovasea is the only source capable of providing the supplies that will meet the Governments requirements for interoperability and mission continuity. Submission Instructions: This notice does not constitute a solicitation for offers, proposals, etc. However, interested firms may send a capabilities statement NO LATER THAN 4:30p.m. (CDT) on November 6, 2026. Statements should be sent to of Kyle Smith at kyle.d.smith@usace.army.mil. The email subject line must reference PANGLR-26-P-0000 033648. Award is anticipated on or about November 24, 2026. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Points of Contact: Contract Specialist Kyle Smith, kyle.d.smith@usace.army.mil; Contracting Officer Samantha L. Stiles, Samantha.L.Stiles@usace.army.mil. All responses received by the deadline will be reviewed by the Government. No telephone inquiries will be accepted.
-Special Notice11/06/2026
Fermilab is seeking to procure a Leica absolute tracker (ATS800) and accessories. Please see attached for Fermilab RFP# 387869swk and associated documentation. Please ensure that you review the RFP document fully, as it outlines how to submit a complete proposal package. Important information related to this RFP: Proposal Due Date: 5pm Central, November 4, 2026 A completed SARC and PROC-FRM-466 are required with your proposal Please reach out with any questions or comments pertaining to this RFP, thank you.
-Solicitation11/04/2026
This is a Request for Information (RFI) only. This RFI is for market research and planning purposes and does not constitute a solicitation or a promise to issue a solicitation in the future. This request for information does not commit the Government to contract for any supply or service whatsoever. The Government is not seeking proposals at this time and will not accept unsolicited proposals. Respondents are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party expense.Description of Requirement: The U.S. Army Corps of Engineers, Chicago District, is seeking sources capable of providing proprietary VEMCO-brand acoustic telemetry equipment, manufactured by Innovasea Systems Inc. This equipment is essential for the continuation of a 14-year-long Invasive Carp Monitoring and Response Plan and must be fully compatible and interoperable with the existing VEMCO telemetry network deployed in the Chicago Area Waterways (CAWS) and Illinois Waterway (IWW). The specific items required include, but are not limited to: NexTrak R1 Transponding Acoustic Receiver with battery; Decoding: Generation-2 code map. VR2Tx-69kHz Coded Acoustic Receiver with Transponder; Innovasea Decoding: Generation-2. VR100 Surface Transponder and Manual Tracking Acoustic Receiver (Model VR100-300).Capability Statement Requirements: Interested parties who believe they are capable of providing the exact VEMCO-brand items listed above are invited to submit a capability statement. The statement must include, at a minimum, the following information: Company Information including Company Name, Address, Point of Contact (Name, Email, and Phone Number). Entity Identification including Unique Entity ID (UEI) and CAGE code. Business Size including business size and socioeconomic status under NAICS code 334511 (e.g., Small Business, Woman-Owned Small Business, Service-Disabled Veteran-Owned Small Business, HUBZone, etc.). Authorization including documentation or a statement confirming your company is an Original Equipment Manufacturer (OEM) or an authorized distributor/reseller for the specific VEMCO product line required. Provide evidence of your ability to source and deliver these exact items. Technical Capability including a brief narrative describing your company experience providing similar acoustic telemetry equipment to federal or state agencies.Submission Instructions: All capability statements must be submitted electronically via email to the points of contact listed below. The email subject line must reference RFI-W912P627QA001. Contract Specialist: Kyle Smith, kyle.d.smith@usace.army.mil. Contracting Officer: Samantha L. Stiles, Samantha.L.Stiles@usace.army.mil. Responses must be received no later than the response due date and time specified in this notice. No telephone inquiries will be accepted.
-Special Notice10/13/2026
66--Cost-Per-Test, Clinical Laboratory AnalyzersSolicitation, Version R1
-Pre-Solicitation12/30/2026

Additional Details

Solicitation Number

W9132T24Q0021

Archive Date

Jun 12, 2024

Office Address

CHAMPAIGN, IL, 61822-1072