Soldier Protection Equipment - Vital Torso Protection
Archived on February 5, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM EST
- Posted
- January 21, 2026
- Notice type
- Sources Sought
- NAICS
- 339999: All Other Miscellaneous Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-APG
- Place of performance
- Fort Belvoir, Virginia
- Last updated
- Nov 4, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W91CRB-25-VTP-FRP
- Notice ID
- 70421d0d569f4e6db14313419feb03a0
Description
Product Manager Soldier Protective Equipment (PdM SPE) is seeking information on industry capabilities and availability to support the Product Management Office (PMO) market research efforts for Vital Torso Protection (VTP) ballistic armor. The PMO requests industry provides white papers with supporting test data addressing their capability and interest in producing a Lightweight Small Arms Protective Insert (LSAPI).
This is a Request for Information (RFI) only. The request is solely for information and planning purposes. It does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. Solicitations are not currently available. Requests for a solicitation will not receive any response from the Government. This notice does not constitute a commitment by the Government to offer a contract for any supply or service whatsoever. White paper submissions are voluntary. The Government will not pay for information requested nor will it compensate respondents for any cost incurred in developing information provided to the Government.
This RFI aims to collect information from vendors on their ability to design and potentially deliver a VTP hard armor plate variant supporting the Army’s VTP Full Rate Production (FRP) requirements. The Government requests white papers with supporting test data solely for internal Government purposes (if available) to further develop and/or refine Statement of Work (SOW) requirements. Appropriate measures will be taken to manage received information and store documentation in accordance with Government standards to prevent the dissemination of sensitive information.
Back Face Deformation (BFD) measurements and test standards will adhere to current approved Government Department of Operational Test & Evaluation (DOT&E) test protocols. The technical ballistic requirements for this ballistic insert will be provided upon request from the PMO to the potential sources of supply who possess an active facility clearance. Interested parties may request copies of the technical ballistic requirements from the contracting office. This document has been designated as limited distribution material. Interested parties may request access to the secured document via the System for Award Management (SAM) system. Upon receipt of request via SAM, interested parties will be required to complete and submit a detailed Request for Access Form, which will be provided to the email the initial SAM request was made from. Interested parties are cautioned that access to the secured documents may take multiple days to process request.
The Government is seeking information in reference to two potential material solutions, a mass efficient hard armor solution and a cost-effective hard armor solution. The interested parties must be able to manufacture ballistic inserts in a Shooter’s Cut design in the standard eight (8) Army sizes. The ballistic insert must be a ceramic-based solution, be less than or equal to four (4) pounds per square foot (PSF) and be less than or equal to one (1) inch in thickness. Should achieving an areal density of four (4) PSF or less prove unattainable, offerors are requested to provide detailed specifications outlining the closest achievable areal density, along with a justification for any deviation. The Government requests that vendors focus their white paper submissions on two (2) design solutions, 1) performance sensitive design that exceeds current thresholds with a design that is less or equal to 4 pounds PSF and meets current Army BFD standards and 2) the most cost-efficient solutions that can meet or exceed the thresholds. This will help the Army gain a deeper understanding of industrial-based capabilities and potential innovations emerging in raw material solutions.
Respondents are encouraged to identify and describe any unique solutions that will result in effective and efficient operations and allow PdM SPE to refine their requirements, as necessary.
The Offeror White Paper submission shall be limited to twenty (20) pages and shall include the following information:
• Offeror's name, address, point of contact, phone number, and e-mail address.
• Offeror’s capability to meet design requirements and design sustainability.
• Offeror's capability to perform a contract of this magnitude and complexity (include in-house capability to execute comparable design work performed within the past five (5) years and a brief description of the project, customer name, timeliness of performance, customer satisfaction, and dollar value of the project & provide at least three (3) examples.
• Offeror's detailed description of their proposed design solutions capability to meet ballistic performance requirements, to include ballistic performance data against PD threats, verification of areal density, and verification of thickness, this data can be internally generated data or provided by a third party NIJ certified laboratory.
• Offeror’s shall provide general cost data for both designs given a projected quantity of 30,000 plates.
• Offerors shall develop a flow chart showing the supply chain, the work efforts at each location and production equipment to support plate manufacturing and control.
• Offerors shall identify methods for subcontractor management: subcontractor selection and rating criteria and surveillance strategy for the proposed design solutions to meet all performance requirements. Offerors shall identify their minimum and maximum production sustainment quantities for the proposed ballistic insert.
• Offeror’s business type and Business Size (HUB Zone, Service-Disabled Veteran Owned Small Business, 8(a), Woman Owned, etc.).
• Offeror’s may include any additional materials explored in the development of emerging plate innovations.
Interested vendors should provide White Papers, detailing proposed plate designs that meet the PD requirements and their level of interest in producing the VTP ballistic armor, no later than forty-five (45) days from the posting of this Notice.
White Papers shall address specific size, weight, shape, performance, and durability requirements as stated in the product description. This information shall be provided via email to Ms. Marianne Velez, marianne.e.velez.civ@army.mil and Ms. Theresa Quick theresa.s.quick.civ@army.mil.
Respondents to this notice shall designate a primary point of contact and one (1) alternate point of contact within the company. The point of contact information shall include the person’s: Name, Business Address, Email Addresses, and Telephone number. To comprehend the information contained within a response to this notice, there may be a need to seek further clarification from the respondents. This clarification shall be requested in writing through Ms. Velez and Ms. Quick.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (1)
- Requires SAM.gov sign-in
Purchase Description - AR-PD 13-01H.pdf
1.3 MBAdded in Sources Sought version 1Posted
Lifecycle
- 1Version 1Sources SoughtArchived
Soldier Protection Equipment - Vital Torso Protection
- 2Version 2Sources SoughtArchived
Soldier Protection Equipment - Vital Torso Protection
- 4Version 4Sources SoughtArchivedCurrent
Soldier Protection Equipment - Vital Torso Protection
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Riot Gear Edit- Update Set Aside Code to Total Small Business Set-AsideUpdate 0002- Update CLIN 0001 to monadnock 9146; CLIN 0002 to PASGT Helmet, and CLIN 0004 to Streamlight SL 20L. | 66% | Combined Synopsis | 09/23/2026 |
Riot Gear | 66% | Combined Synopsis | 06/10/2026 |
Amended to add Set Aside Code. Riot Gear sets | 66% | Combined Synopsis | 04/20/2026 |
See attached Sources Sought Annonuncement and attachments. | 57% | Market Research | 06/08/2026 |
1. This Request for Quote (RFQ) is for a Foreign Military Sales (FMS) procurement for Government of Columbia. 2. Vendors shall fill out all the green cells in RFQ Attachment 1 in accordance with the instructions within RFQ Attachment 1. NSN information is provided for reference only. Please quote the color/pattern requested in Column D. 3. Vendors shall also provide technical information that clearly shows how the product being proposed meets each of the specifications identified in the part number in column B of the RFQ Attachment 1. Note: Vendors will provide side-by-side compression for alternative materials being proposed. Please highlight, circle, or otherwise identify in your technical information provided where your product meets the specifications identified in the part number. 4. The Government anticipates utilizing price analysis to determine a fair and reasonable price of the vendors proposed unit prices in Unison Marketplace. Accordingly, the analytical techniques and procedures prescribed in FAR 15.404-1 for evaluating offeror quotes may be used singly or in combination with others as determined by the Contracting Officer based on competition and other factors to determine a fair and reasonable price. If after receipt of proposals the Contracting Officer determines that there is insufficient information available to determine a fair and reasonable price, then additional data other than certified cost or pricing data for use in evaluation may be required to be submitted by offerors upon the Governments request. 5. Basis of Award - In the event that no single offeror proposes all items, or no offeror proposes a fair and reasonable price on all items, the Government may make multiple awards to different offerors for portions of an individual FMS case. In this event, awards may be made to multiple offerors representing the Lowest Price Technically Acceptable (LPTA) fair and reasonable proposal for those items they proposed. To be eligible for award the vendors shall meet 2 and 3 above as well as its price be deemed fair and reasonable in accordance with number 4 above. The winning vendor will be the Lowest Price Technically Acceptable (in Unison Marketplace). Only ONE (1) quote will be acceptable. Please do not provide multiple options. 6. The Government intends to make award based on the initial quote submissions without asking questions or requesting revisions. Therefore, each offer should contain the Offeror's best terms from a price and technical standpoint. However, the Government reserves the right to ask questions at any time during the evaluation of quotes, if it is determined to be in the best interest of the Government. Questions may be asked of some, all, or none of the Offerors to enhance Government understanding of quotes; allow reasonable interpretation of the quote; or facilitate the Government's evaluation process. 7. Please note information provided in vendors proposed RFQ Spreadsheet is subject to incorporation into the awarded call. 8. Wide Area Workflow (WAWF) & shipping instructions will be given at time of award of the respective Calls. 9. Country will accept partial shipments. Drop shipments are not permitted, the vendor shall provide one (1) shipping address to be used for all items in RFQ Spreadsheet. Material must be made available for pick up within the continental U.S. 10. The award of these calls is subject to the availability of funds. The Government reserves the right to cancel this requirement without incurring any proposal fees. 11. Please submit any questions via email to Unison Marketplace by 05 November 2026 and your proposals to Unison Marketplace via by 1:00 PM (EST) on 13 November 2026. ( https://usg01.safelinks.protection.office365.us/?url=https%3A%2F%2Fmarketplace.unisonglobal.com%2Ffbweb%2FfbobuyDetails.do%3Ftoken%3DolwZ14zRF3134gls5qROoJutQ5sKd3h3qwUoQyIUgYFSCc2h%252FrlGFWI%253D&data=05%7C02%7Cjason.h.goode.civ%40army.mil%7Cf1c2cacf0250493a0b2408df338d6ba7%7Cfae6d70f954b481192b60530d6f84c43%7C0%7C0%7C639286354620870013%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=bF7NoLHWP2ff8yhpZe7MfQNS4%2BuSOhD6doMQ9nLq0pg%3D&reserved=0 ) | 54% | Market Research | 11/13/2026 |
Additional Details
Solicitation Number
W91CRB-25-VTP-FRP
Archive Date
Feb 5, 2026
Office Address
ABERDEEN PROVING GROU, MD, 21005-5001