Notice ID: ea921ab780c349d998dffa9ef926ea11Solicitation
Hydro System Maintenance Services
Archived on July 7, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 AM UTC−04:00
- Posted
- June 27, 2023
- Notice type
- Solicitation
- NAICS
- 333310: Commercial and Service Industry Machinery Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W40M MRCO EAST
- Place of performance
- Fort Liberty, NC, 28310
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- W91YTZ23Q0098
- Notice ID
- ea921ab780c349d998dffa9ef926ea11
Description
See the attached Amendment, Solicitation and Sole Source Justification.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
W91YTZ23Q0098- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- Pre-SolicitationJun 22, 2023
Hydro System Maintenance Services
- 2×SolicitationCurrentJun 22, 2023
Hydro System Maintenance Services
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
US Army Contracting Command Aberdeen Proving Ground Orlando Division will host a Hybrid PALT Industry Update on Tuesday, November 10, 2026 from 1100-1200 ET at the following location: Central Florida Tech Grove, 1st floor Partnership IV building, 12809 Science Drive, Orlando, FL. ******** The session will be hosted by ACC-APG Orlando Division, with contributors from US Army CPE ST3 and USMC PM TRASYS. The session can accommodate a maximum of 160 industry partners for in-person attendance and up to 300 participants via MS Teams. Each participant must register/RSVP for the in-person or virtual session to attend. *******The deadline to register for either in-person or virtual attendance is Friday, October 30, 2026; 11:59 PM ET. ******The deadline to submit questions is also Friday October 30, 2026; 11:59 PM ET. Questions submitted after this deadline will not be answered during the PALT Industry update. ********* Link to register/RSVP: https://forms.osi.apps.mil/r/9fMXhcHKy6 Note: Instructions for joining the session will be provided via email a few days prior to the actual session date. IMPORTANT NOTES REGARDING IN-PERSON ATTENDANCE: Individuals who register for in-person attendance must present a Government issued photo ID to gain entrance to the Tech Grove facility. Due to limited parking at the Partnership IV/Tech Grove facility, we strongly advise that attendees DO NOT PARK in the reserved spots. In-person attendees are encouraged to park in the parking lot on the southeast corner of Science Drive and Technology Parkway, adjacent to the entrance to NSA Orlando main gate and proceed on foot to the Partnership IV - Central Florida Tech Grove, 12809 Science Drive, Orlando, FL 32826. ------------------------------------------------------------------------------------------------------------------ If you elect to submit a question, we ask that you pose a specific and complete question, DO NOT write only a program acronym or name. A complete question will assist the respective Government stakeholders in providing focused and accurate answers during the session. We will first address the questions we received in advance, and if there is time remaining, open the floor for additional questions. Information provided by the Government during this hybrid PALT Industry Update will be limited to updates pertaining to specific procurements. The Government will not provide any procurement sensitive information that would violate the integrity of the source selection process. We will continue to post updated versions of our ACC-Orlando Workload Point of Contact chart at the ACC-APG public website: https://www.army.mil/acc-apg#org-industry ****** The 8 September 2026 PALT slides are attached to this notice for reference. ****** *****************For VIRTUAL attendees: MS Teams “Guest” access instructions are listed below: Notes: You are not required to create a MS TEAMS account to join the session. In fact, to ensure you will be able to join the session, please be sure that you are NOT signed in to any MS TEAMS account when attempting to join the session as an external guest within Army 365 TEAMS. Additionally, DO NOT attempt to join the session using the APP version of TEAMS when prompted (You must join using the "website" instead). When accessing the session via the URL provided below, you must use either EDGE or Chrome as your browser. See the attached document for additional reference. Access Instructions (please follow carefully): Copy and paste the following URL to join the MS TEAMS session (using EDGE or Chrome as the browser): https://dod.teams.microsoft.us/l/meetup-join/19%3adod%3ameeting_bb516ef9df194f1fa56fb0647764c470%40thread.v2/0?context=%7b%22Tid%22%3a%22fae6d70f-954b-4811-92b6-0530d6f84c43%22%2c%22Oid%22%3a%226eda250c-0a51-4e96-b374-4a192c6702eb%22%7d Meeting ID: 993 922 096 871 Passcode: LM2cz6xK 2. After going to the site, click "cancel" to prevent opening in the app version of TEAMS. Then select "join on the web instead" and allow permissions for microphone and camera. 3. Since you will be joining as a GUEST, you MUST enter your FIRST and LAST Name, then select "join now". If you are not granted access within a couple seconds, or you get the message "waiting for others to join", you are likely not in the right meeting and will need to attempt to re-join from the using the link again. ---------------------------------------------------------------------------- NOTE: If you are unable to join the session via TEAMS, you can join the session via audio. Dial-in information for the session is as follows: Dial in by phone : +1 571-616-7941,,776094929# United States, Engleside Phone conference ID: 776 094 929# | - | Special Notice | Open |
Pre-Solicitation Notice The Army Contracting Command – Aberdeen Proving Ground (ACC-APG) Orlando Division is releasing the draft SOW, SPEC and Section L & M for industry feedback as part of continuing industry engagement for the Royal Saudi Land Forces (RSLF) CH-47F Chinook and UH-60M Black Hawk Flight Training Devices (FTDs) requirement. Please be advised that the system specifications (SPECs) are restricted and only releasable to authorized U.S. contractors. To initiate a release, a formal request should be submitted to the points of contact listed below. The attached draft documents are provided solely to obtain industry feedback. These documents are preliminary, are subject to change without notice, and do not constitute a solicitation or commitment by the Government. The available funding for this requirement is $58M. This notice is not a solicitation, RFP, or commitment by the Government, and it does not authorize interested parties to incur costs. The Government is under no obligation to issue a solicitation or award a contract as a result of this notice. Pre-Solicitation Conference The Government will conduct a pre-solicitation conference for interested industry representatives on 07 Dec 2026 / 9:30 – 11:30 AM EST in Partnership II Building. The purpose of the conference is to provide prospective offerors with an overview of the anticipated requirement and an opportunity to ask clarifying questions before release of the solicitation. Industry participants must RSVP no later than 30 November 2026 / 3:00PM EST. Include the Notice ID number in the subject line of your email request. Provide the following information Company Name: Unit Entity Identification (UEI) and Cage: Business Size: Attendee names and titles, email addresses, telephone number Email Point of Contact: Ms. Rosa Rivera, Contract Specialist, rosa.rivera53.civ@army.mil and Ms. Purvi Kapadia, Alternate Contract Specialist, purvi.kapadia.civ@army.mil Mr. David Coe, Assitan Program Manager, david.e.coe.civ@army.mil Interested parties are encouraged to submit questions in writing to the Government before the pre-solicitation conference. Questions should be emailed no later than 3:00PM on 18 November 2026 EST. The Government may address submitted questions during the conference and may accept additional questions during the event as time permits. Any Government responses provided during the conference are informational only. Official responses, if any, will be provided through the formal solicitation process or other authorized written notice. | - | Pre-Solicitation | 11/18/2026 |
NOTICE OF AREA OF INTEREST (AOI) RELEASE: Alternative Sources of Water for Small Units. The Army Contracting Command - Detroit Arsenal (ACC-DTA) has officially released the "Alternative Sources of Water for Small Units" Area of Interest (AoI) for a portable tactical water purification system. This notice serves as an administrative routing announcement to direct all interested vendors and industry partners to the active posting. A conformed copy of the ACC-DTA CSO (W912CH-26-S-0001, Amendment 42), along with all relevant attachments and instructions for submission, can be found directly on SAM.gov at the following public link: https://sam.gov/workspace/contract/opp/5924710e5ec74f8ebff94b0418fc9f03/view Please monitor the link above for any future updates, questions and answers (Q&As), or amendments related to this AoI. All submissions must be completed in accordance with the guidelines found in the conformed CSO Amendment 42 package. | - | Market Research | 11/06/2026 |
Army Contracting Command- Detroit Arsenal (ACC-DTA) intends to solicit and award a five year, Firm Fixed Price (FFP), Requirements Contract. This action will be restricted to DRS Network & Imaging Systems LLC. The Government does not intend to use FAR Part 12 for the acquisition. Noun: Sensor Gimbal GS207 NSN: 5836-01-556-9112 P/N: 7002925-7 Notes: We expect to post the solicitation in 2 to 4 weeks. "CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a mailing list. The burden is therefore on any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal nonresponsive and result in the rejection of the proposal. NOTICE TO ALL CONTRACTORS: All contractors who provide goods/services to the Department of Defense (DoD) must be registered in the System for Award Management (SAM). You may register via the Internet at https://www.sam.gov/SAM/pages/public/loginFAQ.jsf. Further information may be obtained through the internet at: https://www.sam.gov/SAM/pages/public/loginFAQ.jsf Joint Certification Program (EXPORT CONTROL): You must be certified under the United States/Canada Joint Certification Program (JCP) (https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/) to be granted access to the technical data (TDP) for this solicitation. | - | Pre-Solicitation | 11/12/2026 |
U.S. Army Capability Program Executive Simulation, Training, Test and Threat (CPE ST3) - Sources Sought Notification - Foreign Military Sales (FMS), Guatemala’s Bell EPX Flight Training Device PURPOSE CPE ST3 is seeking information regarding the relevant experience and capabilities from industry partners interested in performing this potential requirement. This information will be used to: Determine rough order of magnitude on cost and schedule Identify commercial practices and solutions Determine contractor capabilities that can meet the requirement INTRODUCTION See attached documents: SSN_Guatemala_FTD Bell EPX_Final_10.21.2026 Guatemala Bell 412 EPX FTD Technical Requirements_10.21.2026 | - | Market Research | 11/14/2026 |
Additional Details
Solicitation Number
W91YTZ23Q0098
Archive Date
Jul 7, 2023
Office Address
FORT BELVOIR, VA, 22060-5580