Delivery order HHSN29200024PAIGE INDUSTRIAL SERVICES, INC.

Description of requirement

TAS::75 0838::TAS (ITEM# 1) (REQ# 140181) BASE PART 1/2 - WR# HDQ90064 - RENOVATE ANIMAL SPACE - BLDG GRC - LOG # 0004 - DESIGN-BUILD - UPGRADES TO BUILDING SYSTEMS TO INSTALL AUTOCLAVES - LUIS LEBRON. CT# HHSN292200900010I-HHSN29200024.CAN 8362256 ORF FY-2010 TAS::75 0838::TAS 08003820100DB0SOW FOLLOWS:GERONTOLOGY RESEARCH CENTER (GRC) AUTOCLAVE UPGRADEWR #: HDQ90064INSTITUTE POC: LOUIS SCHECHTERPROJECT SCOPE OF WORK(CONSTRUCTION)PREPARED BYOFFICE OF RESEARCH FACILITIES CONSTRUCTION MANAGEMENT BRANCHNATIONAL INSTITUTES OF HEALTH, BETHESDABUILDING 13 SUITE 2S75ENG. LUIS LEBRON - PROJECT OFFICER301.402.8033(REVISION: FINAL)1. PROJECT BACKGROUND AND DESCRIPTIONTHE PROJECT SCOPE OF WORK (SOW) INCLUDES THE CONSTRUCTION FOR THE INSTALLATION OF ONE BULK AUTOCLAVE LOCATED ON THE 2ND FLOOR OF THE GERONTOLOGY RESEARCH CENTER (GRC) AT THE JOHNS HOPKINS BAYVIEW CAMPUS, BALTIMORE MARYLAND. WORK ALSO INCLUDES THE DESIGN COMPLETION AND CONSTRUCTION FOR THE REMOVAL AND REPLACEMENT OF ONE BULK AUTOCLAVE LOCATED ON THE BASEMENT LEVEL.BOTH NEW AUTOCLAVES ARE GOVERNMENT FURNISHED, GOVERNMENT INSTALLED EQUIPMENT (GFGI). REMOVAL OF THE EXISTING BASEMENT AUTOCLAVE AND THE COMPLETE INSTALLATION OF EACH NEW AUTOCLAVE, INCLUDING ASSOCIATED HARDWARE AND APPURTENANCES, RIGGING, CONTROLS AND LIFTS ARE PROVIDED UNDER SEPARATE CONTRACTS WITH EACH SUPPLIER/MANUFACTURER UNLESS OTHERWISE NOTED ON THE PROJECT DESIGN DRAWINGS. THE CONTRACTOR SHALL PROVIDE ALL SUPPORTING ARCHITECTURAL, STRUCTURAL, MECHANICAL, PLUMBING AND ELECTRICAL WORK AS INDICATED ON THE PROJECT DESIGN DRAWINGS. ALL WORK ASSOCIATED WITH THE INSTALLATION OF THE NEW AUTOCLAVES, INCLUDING PRECISE LOCATIONS FOR POINTS OF CONNECTION FOR ALL INDICATED UTILITIES, SHALL BE CLOSELY COORDINATED WITH EACH AUTOCLAVE SUPPLIER/MANUFACTURER.THE TWO GFGI AUTOCLAVES ARE AS FOLLOWS:- BASEMENT: NEW, RV INDUSTRIES MODEL 568478 W/ SECTIONAL CHAMBER.- SECOND FLOOR: PRE-OWNED, GETINGE GE-2200 MODEL 15222. THE 2ND FLOOR BULK AUTOCLAVE WILL BE LOCATED IN A NEW ENCLOSED SPACE CREATED IN A ROOF AREA PREVIOUSLY USED AS ANIMAL KENNEL SPACE (ABANDONED). SEVERAL EXISTING ANIMAL HOLDING ROOMS AND ADJACENT CORRIDORS WILL BE RECONFIGURED TO CREATE PATHS OF TRAVEL THAT SEPARATE DIRTY AND CLEAN EQUIPMENT RACKS. IN ADDITION TO HOUSING THE NEW AUTOCLAVE AND SUPPORT SPACE FOR MAINTAINING THE UNIT, THE NEW ENCLOSED SPACE ON THE 2ND FLOOR WILL CONTAIN A CLEAN STORAGE AND STAGING AREA. WORK WILL INCLUDE RENOVATION AN EXISTING DRY STORAGE AREA TO BE ANOTHER CLEAN STORAGE AND STAGING AREA. APPROXIMATELY 946 SF OF EXISTING SPACE ON THE SECOND FLOOR WILL BE COMPLETELY RENOVATED AND ANOTHER 2621 SF WILL BE AFFECTED BY THIS WORK.WORK ASSOCIATED WITH THE RECONFIGURED 2ND FLOOR SPACE AND INSTALLATION OF THE 2ND FLOOR AUTOCLAVE, INCLUDES THE INSTALLATION OF A NEW 26 NOMINAL TON GAS FIRED/DX ROOFTOP UNIT, EXHAUST SYSTEM, DUCTWORK, STAINLESS STEEL EXHAUST HOODS, PLUMBING TO RECONFIGURE ROOF DRAINS, FLOOR DRAINS AND ANIMAL HOLDING ROOM SINKS, LIGHTING, POWER, TELEPHONE AND FIRE ALARM.ALL WORK ASSOCIATED WITH THE 2ND FLOOR SPACE AND INSTALLATION OF THE 2ND FLOOR AUTOCLAVE SHALL BE COMPLETED, TESTED AND OPERATIONAL PRIOR TO REMOVAL AND REPLACEMENT OF THE BASEMENT AUTOCLAVE.WORK ASSOCIATED WITH THE INSTALLATION OF THE BASEMENT AUTOCLAVE, INCLUDING ALL RELATED, MECHANICAL, ELECTRICAL AND STRUCTURAL WORK, SHALL BE BASED ON THE INFORMATION PROVIDED ON THE PROJECT DESIGN DRAWINGS. THE FINAL DESIGN OF ALL BASEMENT WORK SHALL BE COMPLETED AS A DESIGN-BUILD AND SHALL INCLUDE A DESIGN AND CONSTRUCTION ALLOWANCE FOR FINAL ARCHITECTURAL, STRUCTURAL, MECHANICAL AND ELECTRICAL DESIGN, UPGRADE OF THE EXISTING EXHAUST AND MAKEUP AIR SYSTEMS FOR THE NEW BASEMENT AUTOCLAVE AND TWO BASEMENT CAGE WASHERS. GC SHALL COORDINATE REQUIREMENTS FOR EXHAUST AND MAKEUP AIR SYSTEM WITH NIH AT PRE-BID WALK-THOUGH. INSTALLATION OF THE NEW BASEMENT AUTOCLAVE WILL REQUIRE CUTTING AND RAISING A PORTION