GovChime
Notice ID: c487efe47fb846b7bf4ed85935bcf1e6Special NoticeArchived

Notice of Intent to Solicit and Award a Sole Source

Archived on January 17, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM EST
Posted
December 18, 2025
Notice type
Special Notice
Set-aside
No Set aside used
NAICS
333923: Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION SOUTH ATLANTIC.ENDIST WILMINGTON
Place of performance
Wilmington, North Carolina
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
PANSAD26P0000029566
Notice ID
c487efe47fb846b7bf4ed85935bcf1e6

Description

Notice of Intent to Solicit and Award a Sole Source Contract for Dredge Murden – Drag Arm Winch And Hydraulic Power Unit

The U.S. Army Corps of Engineers, Wilmington District, intends to award a sole source contract for the Dredge Murden, to provide one (1) replacement Drag-arm winch and one (1) replacement Hydraulic Power Unit (HPU).

This action will result in a firm fixed price contract.

This Notice of Intent to award a sole source contract is not a request for competitive proposals. There is no solicitation document. No RFP will be available for competitive proposals. Phone calls will not be accepted.

The North American Industry Classification System (NAICS) code is 333923 – Overhead Traveling Crane, Hoist, and Monorail System. This acquisition will be processed in accordance with FAR 13.5. The small business size standard is 1250 employees.

The statutory authority permitting other than full and open competition is 41 U.S.C 1901 or the authority of 41 U.S.C 1903 as implemented by the Federal Acquisition Regulation (FAR) Subpart 13.501, “Special documentation requirements” and specifically (a) “Sole source acquisitions.” Contracts awarded using FAR Part 13—Simplified Acquisition Procedures are exempt from the requirements of FAR Part 6—Competition Requirements.

Provide (1) replacement Drag-Arm Winch and (1) replacement Hydraulic Power Unit (HPU) for the Dredge Murden.  These items shall be direct replacements and in order to maintain exact form and fit to the current vessel configuration.

The period of performance is 120 days after contract award.  

The point of contact for this action is Contract Specialist, Jenifer Garland, who can be reached at jenifer.m.garland@usace.army.mil. Interested parties may express their interest and provide a capabilities statement NLT 2 January 2026 at 4:00 PM EST. A determination not to compete this proposed contract upon responses to this notice is solely within the discretion of the Government.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (1)

  • A12 - JA-SS_MU_Drag Winch and HPU_posting_Redacted.pdf

    413 KBAdded in Special Notice version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Special NoticeArchived

    Notice of Intent to Solicit and Award a Sole Source

    Notice 062e2119ab8f4bc698b2034a63912607 on SAM.gov

  2. 3
    Version 3Special NoticeArchivedCurrent

    Notice of Intent to Solicit and Award a Sole Source

    Notice c487efe47fb846b7bf4ed85935bcf1e6 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Low Level Cranes
66%
Solicitation11/30/2026
Salient CharacteristicsItem: Pneumatic Chain Hoist Assembly, Lug-Mounted.Brand Name or Equal To. Cisco-Eagle SKU TCRP-1627048 reference model TCRP2000P2.Quantity 2 eaches.1. Required Function. The contractor shall furnish one new, complete, commercially available pneumatically chain hoist assembly for lifting and vertically positioning loads in an overhead lifting application. The offered item shall be fully functional upon delivery and include all components identified below that are necessary for normal operation.2. Mandatory Salient Characteristics. The offered hoist assembly shall meet all of the following minimum requirements:CHARACTERISTIC. MINIMUN GOVERNMENT REQUIREMENTType. Pneumatically powered chain hoist assembly.Rated lifting capacity. Minimum rated capacity of 2 short tons i.e. 4,000 lb.Lift height. Minimum 10 foot vertical lift.Mounting configuration. Lug mounted configuration.Bottom hook. Furnished with a standard bottom hook suitable for the offered hoists rated capacity.Pendant control. Furnished with a pendant control. Pendant length shall be 7.5 feet, measured from the hoist, control connection point to the pendant control, or equivalent length necessary to provide the same operating reach.Chain container. Furnished with a canvas chain container sized to safely contain the full length of load chain associated with the required 10 foot lift.Structural, track interface. The assembly shall be compatible with the Governments existing flange, track interface identified as a 4 inch flange configuration with an applicable flange range of 3.23 inches through 6.02 inches. The vendor shall identify the specific mounting/trolley/interface dimensions of the offered item and certify compatibility with this requirement.Condition. New. Current-production equipment; used, refurbished, remanufactured, or demonstrator equipment is not acceptable.Completeness. Furnished as a complete operational assembly, including the hoist, required mounting/interface components, bottom hook, pendant control, and chain container.Documentation. Furnish manufacturer product literature, dimensional information, installation instructions, operating instructions, maintenance information, rated-capacity information, and warranty documentation.Identification Hoist shall bear permanent manufacturer identification and rated-capacity marking.The reference item identifies the item as a TCRP2000P2 hoist with a 2-ton capacity, 10-foot lift, lug mounted, standard bottom hook, 4 inch Flange 3.23-6.02 inch Flange Range, canvas chain container, and Standard-to-Lift Pendant Length - L = 7.5 ft.3. Offeror Submission RequirementsTo be considered technically acceptable, the vendor shall provide the following with its quotation.Manufacturer name and exact manufacturer part number for the item offered.Manufacturer descriptive literature, specification sheet, and dimensional drawing sufficient to verify:Rated capacity.Lift height.Lug-mount configuration.Bottom-hook configuration.Pendant length.Chain-container material and capacity andCompatibility with the stated 3.23-6.02-inch flange, interface range.If proposing an equal product, clear identification that the product is an equal product, rather than the referenced item.Warranty terms and the name and address of the warranty service point of contact.Proposed delivery lead time and shipping terms.Offerors proposing an equal product shall identify the offered make, model and provide descriptive literature or other adequate descriptive data showing that the item meets the solicitations salient characteristics.4. Technical Acceptability Language. Technical acceptability will be evaluated on a pass/fail basis. The quotation will be considered technically acceptable only if the offeror provides sufficient documentation demonstrating that the offered item meets every mandatory salient characteristic. Failure to provide adequate supporting documentation may render the quotation unacceptable.5. Delivery and Acceptance Language. Delivery shall be F.O.B. Destination to the delivery location identified in the solicitation. The Government will inspect the item upon delivery for quantity, visible shipping damage, completeness, manufacturer identification, rated-capacity marking, and compliance with the quoted make and model and required salient characteristics. Acceptance is contingent upon satisfactory inspection and verification of required documentation.
66%
Combined Synopsis11/13/2026
Low Level Cranes
66%
Solicitation10/06/2026
Hoist Stand
66%
Combined Synopsis09/24/2026
The purpose of this Sources Sought is to gain knowledge of interest, capabilities, and qualifications of firms that possess the expertise to successfully complete and perform the requirements described herein. Furthermore, this effort seeks to address any questions, recommendations, or concerns from Industry. The information gathered will assist the Government in ensuring there is adequate competition among a potential pool of responsible contractors. Prior Government contract work is not required for submitting a response under this announcement. Please refer to the attached Sources Sought documentation for the updated details of this action. The Capabilities Statement requested for this Sources Sought is not intended to be a Request for Proposal (RFP) nor an Invitation for Bid (IFB), nor does it restrict the Government to an ultimate acquisition approach. It is intended to request statements that thoroughly demonstrate interested companies existing expertise and experience (or developed plans for such) in relation to the areas specified herein. Any commercial brochures or currently existing marketing material may be submitted alongside the Capabilities Statement. Submission of a Capabilities statement is not a prerequisite to any potential future offerings, but participation will assist the U.S. Army Corps of Engineers in tailoring requirements to be consistent with industry capabilities. This announcement is for information and planning purposes only and is neither to be construed as a commitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation. All interested contractors should submit responses via email by 1000 hours Eastern Daylight Time (EDT) on 22 Sep 2026. Submit responses and information to Elena.N.Shapovalova@usace.army.mil and Eric.L.Caruso@usace.army.mil. No hard copies will be accepted. Amendment 0001 to the Sources Sought Notice is issued to revise Item 4, Acquisition Information/Project Description.
66%
Market Research09/22/2026

Additional Details

Solicitation Number

PANSAD26P0000029566

Archive Date

Jan 17, 2026