Notice ID: 271815c857eb405da0e15401b31666b5Solicitation
Purchase and Delivery of Terrestrial Laser Scanners and accessories updated
Archived on October 9, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM UTC−06:00
- Posted
- September 16, 2024
- Notice type
- Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 334519: Other Measuring and Controlling Device Manufacturing
- Agency
- Department of AgricultureFOREST SERVICE
Notice details
- Office
- Arapaho and Roosevelt National Forest
- Place of performance
- Fort Collins, CO, 80526
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- 1240LP24Q0101
- Notice ID
- 271815c857eb405da0e15401b31666b5
Description
This is a new solicitation to replace the previous, unawarded one. This is for commercial items and quotes are being requested. If submitting a quote package, complete blocks 17 and 30 a-c of the SF1449, complete Section B, provide product descriptions of the line items listed in the specifications - Attachment 1. Complete all highlighted items listed in Section E and F of the RFQ, which includes submitting a Technical Proposal. This will be a single award, firm-fixed price supply contract. See full Request for Quotes (RFQ) document and Attachment 1 for the UPDATED minimum specifications in the Attachments section of this solicitation notice.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
1240LP24Q0101- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- SolicitationCurrentSep 16, 2024
Purchase and Delivery of Terrestrial Laser Scanners and accessories updated
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Supply and Deliver six (6) heat flux transducers for fire research applications, including water‑cooled radiant and total flux sensors meeting the specifications in the attached Statement of Work. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 1240BE27Q0015 is issued as a Request for Quotation (RFQ) for heat flux transducers used in fire research. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 334519 The small business size standard is 600 employees. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency. | - | Combined Synopsis | 11/06/2026 |
Small-Diameter Soil Cyclic Triaxial Testing System THIS IS NOT A SOLICITATION FOR PROPOSALS THIS IS A SOURCES SOUGHT SYNOPSIS ONLY This Sources Sought is for the purpose of identifying firms that can meet the following Bureau of Reclamation Requirements. The Bureau of Reclamation (BOR) has a requirement for Small-Diameter Soil Cyclic Triaxial Testing System, under NAICS 334519 - Other Measuring and Controlling Device Manufacturing. GOVERNMENT DISCLAIMER This notice is issued solely for market research and planning purposes. It is not a solicitation and does not obligate the Government to issue a solicitation or award a contract. The Government will not pay for information submitted in response. Responses may be used to assess commercial availability, technical feasibility, potential sources, socioeconomic participation, and acquisition strategy. ANTICIPATED REQUIREMENT: New Cyclic Triaxial System - Triaxial testing system with cell. - Electronic components to connect to existing 110V power. - Pressure transducers. - 10 kN internal load cell. - Load ram assembly. - Controller system. - Data acquisition system. - Hydraulic installation kit. - Lifting system. - Base pedestal, top cap, and preparation kits for 38 mm, 50 mm, 70 mm, and 100 mm specimens. - On-specimen LVDTs with signal conditioning kit, consisting of two axial and one radial for each of the 38 mm, 50 mm, and 70 mm specimen sizes. - Displacement transducers. - Control software for advanced dynamic cyclic loading control, including load control. Minimum Overall Requirements - System shall directly interface with the GDS Instruments cyclic triaxial testing system already owned by Reclamation, including existing hardware and software. - Performance specifications conforming to ASTM D3999. - High-accuracy electromechanical actuators. - 10 kN capacity axial load cell. - Axial force accuracy of less than 0.1% of full-scale output and less than 0.4 kN for a 10 kN load cell. - USB computer interface. - 100 mm displacement range with a resolution of 0.2 micrometers. - Operating frequency of 5 Hz. - Ability to test specimens up to 101 mm in diameter. - Ability to deliver cell pressures up to 2 MPa. - Delivery of the entire system to Reclamation's Technical Service Center, Building 56, Door S-7, Denver, Colorado. - Installation and setup shall be simple enough to be completed by Reclamation personnel. Warranty, Experience, and Support Requirements - The system shall include at least a one-year warranty provided by the supplier. - The system must be provided by a supplier who can demonstrate successful construction, commissioning, and sale of at least 5 similar systems worldwide. - Supplier must have qualified service technicians available for any ongoing support, maintenance and repair. - The systems shall be plug-and-play, manufactured with new parts, and include current calibration documentation. Information Requested from Industry Interested parties should submit a concise capability statement addressing each item below and cross-reference supporting product literature. 1. Business name, address, website, point of contact, telephone number, and email address. 2. SAM.gov Unique Entity Identifier, CAGE code, and current registration status. 3. Business size and applicable socioeconomic categories under NAICS 334519, Other Measuring and Controlling Device Manufacturing. 4. Manufacturer, make, model, and commercial product name for each proposed system and major component. 5. Explanation of conformity with ASTM D3999 and any limitations or optional components. 6. Description of control and data acquisition software, dynamic loading and load-control functionality, licensing, operating-system support, and data export. 7. Warranty coverage and duration, technical support, qualified service technician availability, spare-parts availability, and repair approach. 8. Evidence of successful construction, commissioning, and sale of at least 5 similar systems worldwide. 9. Estimated delivery lead time and schedule risks. 10. Country of origin, manufacturing location, and ability to manage customs, import, shipping, and delivery to Denver, Colorado. INSTRUCTION FOR SUBMISSION: Interested parties may submit a response in an electronic format only via email to ConnieAnn Tudela-Kately, connieann_tudela-kately@ios.doi.gov no later than November 6, 2026, 5PM Eastern. Electronic files should be in Microsoft Office Word or PDF format. All information should be UNCLASSIFIED material only. Any proprietary information must be marked as such, the Sources Sought information should not exceed a total of 10 one-sided 8 1/2x11 pages, with one-inch margins, and font no smaller than 12 points. | - | Market Research | 11/06/2026 |
TSC tTEM V2 SYSTEM UPGRADE with tTEM2 Software, extended functionality (subscription, 12 months) - Sources Sought | - | Market Research | 11/05/2026 |
Permanent GPS Base Station bundle and a prism with active and passive modes for tracking. Rugged batteries and a radio module and radio antennas. | - | Combined Synopsis | 09/17/2026 |
GPS Equipment | - | Combined Synopsis | 09/16/2026 |
Additional Details
Solicitation Number
1240LP24Q0101
Archive Date
Oct 9, 2024
Office Address
FORT COLLINS, CO, 80526