GovChime
Notice ID: 0697c417f1374a379e41f41c5f922afdAward NoticeAwarded

Z--Grid Tied PV System, NPS-LABE

Awarded on August 3, 2023. Full description on SAM.gov.

Awarded tounder 140P8423C0007 (source: SAM.gov award notice)• $676.2K

Overview

Posted
August 4, 2023
Notice type
Award Notice
NAICS
238210: Electrical Contractors and Other Wiring Installation Contractors
Agency
Department of the Interior

Notice details

Place of performance
Tulelake, CA, 96134
Last updated
Sep 9, 2025
Award date
Aug 3, 2023
Award amount (SAM.gov award notice)
$676.2K

Identifiers

Solicitation number
140P8423R0009
Notice ID
0697c417f1374a379e41f41c5f922afd
Award number (PIID)
140P8423C0007

Description

GRID TIED PV SYSTEM, LAVA BEDS NATIONAL MONUMENT, SISKIYOU COUNTY, CALIFORNIA.

Full description on SAM.gov

Award Overview

Award Number

140P8423C0007

Award Amount (SAM.gov award notice)

$676.2K

Award Date

Aug 3, 2023

Awardee

Awardee UEI

L7FCLP7KBAW3

Original Solicitation

Notice ID: 0697c417f1374a379e41f41c5f922afd

Posted Date: Aug 4, 2023

Original Response Deadline: Not specified

Contacts

Documents

No documents available.

Lifecycle

Solicitation:140P8423R0009
  1. Pre-Solicitation
  2. Solicitation
  3. Awarded

This opportunity has been awarded.

  1. Pre-SolicitationApr 12, 2023

    Z--Grid Tied PV System, NPS-LABE

    Notice 1140b1c6fd93483aae43729953914cfa on SAM.gov

  2. 3×
    SolicitationApr 29, 2023

    Z--Grid Tied PV System, NPS-LABE

    Notice 41a6537873cd46368a3f87a3dc910ea4 on SAM.gov

  3. AwardedCurrentAug 4, 2023

    Z--Grid Tied PV System, NPS-LABE

    Notice 0697c417f1374a379e41f41c5f922afd on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
I. PURPOSE AND DISCLAIMER**********************The U.S. Army Corps of Engineers (USACE), Chicago District, is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support the requirement for upgrading our Commercial Gear Backup Power (CGBP) and associated control system at our electronic fish barrier located in Romeoville, Illinois. We are seeking to identify qualified Small Business concerns (including 8(a), HUBZone, SDVOSB, WOSB, and Small Business Joint Ventures/Teaming Arrangements) and Other-Than-Small Business concerns capable of performing this requirement. The intention is to procure these services on a competitive basis.**********************BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES (IN FULL OR IN PART) OR PROCURED THROUGH FULL AND OPEN COMPETITION, and multiple awards MAY be made. All Small Business Set-Aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.**********************DISCLAIMER**********************THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMMATION PERTAINING TO THIS REQUIREMENT. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought.********************************************II. COMPREHENSIVE TECHNICAL DESCRIPTION and PROJECT SCOPE********************************************The Chicago Sanitary and Ship Canal (CSSC) Electric Dispersal Barrier facility requires a complex industrial electrical power generation, backup power, and automation and control system modernization project. This system is a critical component of the federal effort to prevent the movement of invasive aquatic species between the Great Lakes and Mississippi River basins. **********************Specifically, USACE needs to upgrade the backup generator and switchgear control systems at Permanent Barrier 1 (PB1) to correct unreliable operation caused by deficiencies in the original design, configuration, and wiring. The project requires replacing generator controllers, modernizing breaker controls and communications, and rebuilding the control software and operator interfaces to improve reliable operation on utility and backup power. Work will require testing, operator training, and a phased changeover to maintain continuous barrier operations. Work will be performed at an active, mission-critical facility requiring careful coordination with ongoing operations, planned equipment outages, and system changeovers to maintain operational readiness and minimize disruptions. A critical requirement is the integration of new equipment into an active industrial facility while protecting existing operations. The anticipated work may include engineering, design review, equipment upgrades and replacement, control system programming, integration, testing, and commissioning of interconnected electrical and industrial automation systems. ******************************************************************TECHNICAL CAPABILITIES:******************************************************************The project requires specialized expertise in: a) generator synchronization and load management, b) switchgear automation, c) protective relaying, d) programmable logic controllers (PLCs), e) human-machine interfaces (HMIs), industrial communications, and associated monitoring and data management systems.**********************Contractors must possess the technical capabilities necessary to work with the existing systems and integrate new equipment while maintaining compatibility and functionality. The existing facility incorporates Rockwell Automation ControlLogix PLCs, FactoryTalk View SE, FactoryTalk Transaction Manager, Microsoft SQL Server, Basler generator synchronization and control equipment, Schweitzer Engineering Laboratories (SEL) protective relays and RTAC equipment, and DEIF generator controllers. ATTACHMENT NOTICE: Interested parties must carefully review Attachment 1 (Equipment_SOW.xlsx PB1 Equipment Modernization and SOW Matrix) attached to this notice in PIEE, the DoW Procurement Integrated Enterprise Environment, which details the specific equipment removals, modifications, additions, hard-wired control conversions, I/O transitions, and as-built drawing updates (across four separate contractor drawing sets) required under our anticipated scope.**********************Contractors must demonstrate their capability of obtaining a specialized Master Systems Integrator (MSI) or Industrial Automation and Control Systems (IACS) engineering firm to perform any needed engineering, programming, integration, testing, commissioning, and troubleshooting of the complex interconnected industrial control systems.**********************Contractors must demonstrate their ability to obtain qualified personnel. Qualified personnel include Electrical Generating Systems Association (EGSA) certified technicians or personnel possessing equivalent documented qualifications to support generator-related engineering, design reviews, integration, testing, and commissioning. If proposing to use equivalent, provide what documentation your firm considers as equivalent for USACE consideration.**********************The contractor must possess the technical and organizational capabilities to execute phased modifications, coordinate authorized shutdowns and system changeovers, implement temporary control arrangements where necessary, perform pre-commissioning and acceptance testing, and develop contingency measures to minimize operational disruptions and maintain the safety, reliability, and continuity of existing barrier operations.**********************III. REQUESTED INFORMATION FROM INTERESTED PARTIES********************************************Interested firms are invited to submit a Capability Statement (not to exceed 10 pages) addressing the following four (4) sections after reviewing the technical capability narrative above and Attachment 1 (Equipment_SOW.xlsx):SECTION A: ADMINISTRATIVE AND BUSINESS SIZE********************************************1. Company Name, Address, Point of Contact, telephone number and email, CAGE Code, and Unique Entity Identifier (UEI).**********************2. Business Size under NAICS 238210 ($19.0M Size Standard) and all applicable socioeconomic designations.**********************3. If proposing as a Small Business, confirm your understanding of FAR 52.219-14 (Limitations on Subcontracting) and your ability to perform at least 25% of the cost of contract performance (excluding the cost of materials) with your own organization or similarly situated small business entities. **********************4. Should this requirement be solicited as Full and Open Competition, other-than-small-business offerors will be required to submit an acceptable Small Business Subcontracting Plan in accordance with RFO 19.109 and FAR 52.219-9, as applicable. All respondents are asked to: a) Describe your experience meeting small business subcontracting goals on comparable construction or modernization projects, b) Identify potential subcontracting opportunities for small businesses within the attached scope of work, c)Provide preliminary estimated subcontracting percentages by socioeconomic category (e.g., WOSB, SDVOSB, HUBZone, SDB), and d) Identify anticipated challenges and strategies to maximize small business participation during execution.**********************SECTION B: TECHNICAL AND INTEGRATION EXPERIENCE********************************************1. TECHNICAL CAPABILITIES. Tailored capability statements addressing the particulars of this effort under the technical capabilities section above, with appropriate documentation supporting claims of organizational and staff capability. Detail what specific technical skills does your company possess which ensure capability to perform the tasks. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements, as well as experience of managing similar teams in the past.********************2. EQUIPMENT LIST REVIEW: Confirm your firm has reviewed Attachment 1 (Equipment_SOW.xlsx) and describe up to three (3) comparable projects executed within the past seven (7) years involving turnkey switchgear/generator control remediation, hard-wired relay conversions, and multi-vendor integration (Rockwell ControlLogix, SEL Relays/RTAC, Basler, and FactoryTalk View SE). Clearly delineate whether experience is based upon the prime, or any proposed subcontractors.**********************3. CERTIFICATIONS AND QUALIFICATIONS: Confirm your proposed teams compliance with the EGSA certification requirement or identify the equivalent documented qualifications your personnel possess to support this scope. Identify whether your proposed lead personnel hold: (a) Control Systems PE Licensure, (b) EGSA Certification, or (c) CSIA/Rockwell Integrator Certification.**********************4. PHASED CUTOVER AND FAT: Describe your firms capability to perform Factory Acceptance Testing (FAT), simulation prior to site delivery and execute a phased cutover at an active 24hr, 7day a week facility without unplanned outages.**********************SECTION C: COMMERCIAL SOLUTIONS AND LEAD-TIME********************************************1. COMMERCIAL SOLUTIONS: Based on your review of Attachment 1, identify what commercial solutions or minor modifications are available in the marketplace to meet these functional requirements.**********************2. ESTIMATED LEAD-TIME: Provide an estimated lead-time required to procure the necessary hardware components and complete the on-site upgrades, testing, drawing updates, and commissioning.********************************************IV. INSTRUCTIONS FOR RESPONSE SUBMISSION**********************Please submit capability packages electronically through the PIEE Solicitations Portal or via email to the designated Point of Contact by December 2, 2026, at 1:00 PM CST. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to the Contract Specialist, Jane Doe, in either Microsoft Word or Portable Document Format (PDF). All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government.**********************The Government will evaluate market information to ascertain potential market capacity to: 1) provide services consistent, in scope and scale, with those described in this notice and otherwise anticipated; 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements; 3) implement a successful project management plan. **********************All questions must be submitted to the contract specialist.
57%
Market Research12/02/2026
This is a inviation for bid, for construction services to replace Fire Alarms and Intrusion Systems at SACN.
56%
Solicitation11/30/2026
PROJECT TITLE: REPLACE DETERIORATED LIGHTING SYSTEM IN BLDG #12400 (1F-2F)PROJECT LOCATION: CAMP HUMPHREYSTHIS IS NON-WORK PLAN TASK ORDER FOR MATOC CONTRACTORS ONLY.A. ONLY PROPOSALS FOR THIS REQUIREMENT ARE BEING SOLICITED BY THE MATOC CONTRACTORS FOR THE FOLLOWING MATOC CONTRACTS ISSUED BY 411TH CONTRACTING SUPPORT BRIGADE (CSB). PROPOSALS FROM OFFERORS OTHER THAN THESE MATOC CONTRACTORS WILL NOT BE CONSIDERED FOR THE AWARD. CONTRACT NUMBERS: W91QVN-24-D021, 0023, 0024, 0025, 0026, 0028, 0029, 0030, 0031, 0032, 0033, 0034, 0035, 0036, 0037, 0038, 0080, 0083, 0100, 0104, AND 0109.B. SITE VISIT: ALL MATOC OFFERORS WHO INTEND TO PROPOSE ON THIS SOLICITATION ARE STRONGLY RECOMMENDED TO ATTEND THE SITE VISIT. SEE SITE VISIT SCHEDULE.C. IF THE CONTRACTOR IS UNABLE TO SUBMIT AN OFFER IN RESPONSE TO THE RFP, THE CONTRACTOR SHALL SUBMIT NO OFFER LETTER BY CLOSING DATE AND TIME SPECIFIED IN THE SOLICITATION.D. PURSUANT TO FAR 36.204, THE ESTIMATED PRICE RANGE OF THIS PROJECT IS BETWEEN $500,000 AND $1,000,000.E. SUBJECT TO THE AVAILABLITY OF FUNDS (SAF): FUNDS ARE NOT PRESENTLY AVAILABLE FOR THIS ACQUISITION. NO CONTRACT AWARD WILL BE MADE UNTIL APPROPRIATE FUNDS ARE MADE AVAILABLE.
53%
Combined Synopsis08/07/2026
Login at https://piee.eb.mil and search for 'W90VN726RA011' to obtain more details.*
52%
Combined Synopsis04/27/2026
11/4/2026 - Abstract posted. -- 10/21/2026 - Amendment 0005 - Incorporate revised response to bidder's question #13, update construction wage determination, and extend bid due date to November 4, 2026, no later than 2:00 pm CST. -- 10/15/2026 - Amendment 0004 - Invite bidders who submitted acceptable technical proposals in Step-One to submit a bid in Step-Two. Step-Two Bid due date is October 28, 2026, no later than 2:00 pm CST. Only American Alarm Co., Inc. and Elite Pacific Construction, Inc. are allowed to submit bids. Further bid instructions will be e-mailed to these contractors. -- 8/17/2026 - Amendment 0003 - Extend Step-One technical proposals due date to August 26, 2026, no later than 1:00 pm CST. -- 8/5/2026 - Amendment 0002 - Incorporate bidder's question with response. -- 8/3/2026 - Amendment 0001 - Incorporate pre-bid site visit meeting minutes, sign-in sheet, photo, responses to bibbers' questions, increase period of performance. Correct soliciation number on Instructions for Two-Step Sealed Bidding document. -- THIS IS A COMBINED SYNOPSIS-SOLICITATION OF PROPOSED CONTRACT ACTION. The Federal Bureau of Prisons (FBOP) is issuing a Two-Step Invitation for Bid (IFB). The solicitation will result in one (1) firm-fixed-price contract for a project titled Upgrade Fire Detection System at the Federal Detention Center (FDC) located in Honolulu, Hawaii. FDC Honolulu is a federal correctional institution located at 351 Elliott Street, Honolulu, HI 96819. The project consists of furnishing all equipment, materials, and labor for the complete construction to upgrade the fire detection system at the FDC Honolulu. The specification and construction drawings included in the attachments of this solicitation provides the requirements for the project. Site Visit: A site visit is planned for Tuesday, July 21, 2026. The details are in solicitation attachment Instructions for Two-Step Sealed Bidding, pages 3-4. Invitation For Bid (IFB) Evaluation Criteria: This solicitation and resulting contract is using the Two-Step Sealed Bidding procurement method as described in FAR Deviation 14.211. The two-step procedure is a combination of competitive procedures designed to obtain the benefits of sealed bidding while ensuring only technically acceptable firms participate in the priced sealed bid. The process allows for the Step-One technical proposal submission and evaluation to be performed to identify firms eligible for Step-Two. Contractors participating in the solicitation will submit a technical proposal in accordance with the solicitation attachments Instructions for Two-Step Sealed Bidding and Step-One Technical Proposal Factors. Submissions will be evaluated for acceptability in accordance with solicitation attachment Step-One Technical Proposal Evaluation. Under this bidding process, Step-One consists of the request for technical proposal, evaluation, and (if necessary) discussion of a technical proposal. The submission requirements of Step One, Request for Technical Proposal, shall not include any prices or pricing information. Only one (1) technical proposal may be submitted by each offeror. The technical proposals will be evaluated for technical acceptability. A notice of “acceptable” or “unacceptable” will be forwarded to each Step-One offeror upon completion of the technical proposal evaluation and final determination. The names of the offerors that submitted acceptable technical proposals will be listed on the Government’s SAM.gov solicitation posting for the benefit of prospective subcontractors. In Step-Two, an amendment to the solicitation will be issued along with any updates to the technical specifications and construction drawings to only those bidders whose technical proposals are determined to be acceptable in Step-One. The normal sealed bidding process in FAR Part 14 will be followed in Step-Two. Only bids based upon technical proposals determined to be acceptable, either initially or as a result of discussions for Step- One, will be considered for award. Bidders must comply with the 100% completed specifications and construction drawings and the bidder’s acceptable technical proposal. Bid bonds are not required to be submitted with the Step-One technical proposal. Bid bonds will be required to be submitted with the Step-Two bid submission. Payment and Performance Bonds will be required for the full amount (100%) at the time of contract award before the Notice to Proceed (NTP) can be issued. Any secured/locked documents (Specifications and Drawings) with the solicitation will require an active vendor registration at https://SAM.gov as well as your Marketing Partner Identification Number (MPIN) associated with your System for Award Management (SAM) registration. The controlled documents will not be emailed. If you encounter problems accessing these documents, please contact the Federal Service Desk at 866-606-8220. Pursuant to Federal Acquisition Regulation (FAR) Companion 36.101-3, the estimated magnitude of the project lies between $5,000,000 and $10,000,000. (NOTE: This range is not meant to imply that the project has necessarily been estimated/budgeted to the maximum of the selected range. It merely conveys that the estimate/budget lies somewhere within that range). The North American Industrial Classification System (NAICS) code applicable to this requirement is 238210 with a corresponding small business size standard of $19 million. The solicitation will be distributed solely through the SAM database at https://SAM.gov. Hard copies of the solicitation will not be made available. The website provides download instructions. All future information about this solicitation, including any amendments, will also be distributed solely through this website. Interested parties are responsible for continuously monitoring this website to ensure that they have the most recent information about this proposed contract action. This is a 100 percent small business set-aside. In order to qualify for award, your business size metrics information entered in your SAM registration must be less than or equal to the size standard specified above (see provision 52.219-1 in the Representations & Certifications section of your registration and view the table therein listing NAICS codes and your indicated business size relative to the assigned NAICS code above). Each bidder's SAM registration will be reviewed by the Government to confirm that your business size meets the small business size standard requirement. All bidders are urged to double check their SAM registration and update as necessary, including the size metrics information. This solicitation is intended only for those who would be entering into a Prime contract with the FBOP for the entirety of this project. The FBOP does not award subcontracts. Subcontracts (if applicable/necessary) are the responsibility of the Prime contractor. The FBOP has no privity of the contract with subcontractors. IMPORTANT: Any contractor interested in obtaining a contract award with the FBOP must be registered in the System for Award Management (SAM) at https://SAM.gov. If you have questions about SAM.gov, Government procurements in general, or need assistance in the preparation of your bid/proposal/offer, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org.
51%
Combined Synopsis11/04/2026

Additional Details

Solicitation Number

140P8423R0009

Archive Date

Aug 18, 2023

Office Address

POINT REYES STATION, CA, 94956