GovChime
Notice ID: fa7c7e5d2f0f47e3984fff027053030fSpecial Notice

LOLIGO SYSTEMS HARDWARE-SOFTWARE

Archived on April 27, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−06:00
Posted
April 11, 2024
Notice type
Special Notice
NAICS
334519: Other Measuring and Controlling Device Manufacturing
Agency
Department of CommerceNATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION

Notice details

Office
DEPT OF COMMERCE NOAA
Last updated
Dec 4, 2025

Identifiers

Solicitation number
143021-24-0179JRW
Notice ID
fa7c7e5d2f0f47e3984fff027053030f

Description

***THE NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATIONS (NOAA) ACQUISITION & GRANTS OFFICE (AGO), WESTERN ACQUISITION DIVISION-BOULDER (WAD), NATIONAL MARINE FISHERIES SERVICE (NMFS), INTENDS TO NEGOTIATE, ON A SOLE SOURCE BASIS, UNDER AUTHORITY OF FAR 13.106-1(b)(1), WITH LOLIGO SYSTEMS APS LOCATED IN DENMARK FOR LOLIGO SYSTEMS HARDWARE-SOFTWARE TO BE DELIVERED TO HIGHLANDS, NJ. ***THE SOLE SOURCE DETERMINATION IS BASED ON NOAAS REQUIREMENT THAT LOLIGO SYSTEMS APS IS THE ONLY VENDOR THAT MANUFACTURES AND DISTRIBUTES THIS LOLIGO SYSTEMS HARDWARE-SOFTWARE. THE LOLIGO SYSTEMS AUTORESP 3.0 SOFTWARE, TREADMILL RESPIROMETER, AND OXYGEN DIPPING PROBE ARE HIGHLY SPECIALIZED PIECES OF SCIENTIFIC EQUIPMENT THAT INTEGRATE INTO A FULLY AUTOMATED INTERMITTENT-FLOW RESPIROMETRY MULTICHANNEL SYSTEM. COLLECTIVELY THIS PURCHASE REQUEST PROVIDES THE HOWARD LAB A SYSTEM THAT CAN SIMULTANEOUSLY PERFORM MULTIPLE RESTING AND ACTIVE METABOLISM EXPERIMENTS TO PRODUCE THE REQUIRED RESEARCH DELIVERABLE. AMERICAN LOBSTERS HAVE NEVER BEEN STUDIED WITH THIS COMBINED TECHNOLOGY. LOLIGO SYSTEMS IS THE ONLY COMPANY IN THE WORLD TO CONCEPTUALIZE AND MANUFACTURE FULLY AUTOMATED AND INTEGRATED HARDWARE-SOFTWARE SYSTEMS FOR AQUATIC INTERMITTENT-FLOW RESPIROMETRY THAT ALLOW MULTI CHANNEL SIMULTANEOUS CONTROL AND RECORDING OF INTERMITTENT-FLOW RESPIROMETRY (I.E., OXYGEN CONSUMPTION RATE MEASUREMENTS). FURTHER, LOLIGO SYSTEMS IS THE ONLY COMPANY IN THE WORLD THAT HAS CONCEPTUALIZED, DEVELOPED, AND MANUFACTURED A TREADMILL SWIM TUNNEL RESPIROMETER, INCLUDING THE SPECIALIZED SOFTWARE AND HARDWARE DEVICES FOR FULLY AUTOMATED SIMULTANEOUS COMPUTERIZED EXPERIMENTS AND INTERMITTENT-FLOW RESPIROMETRY. ALL OF THESE HIGHLY SPECIALIZED PIECES OF SCIENTIFIC EQUIPMENT ARE MANUFACTURED, TESTED, AND INTEGRATED INTO SYNERGISTIC AUTOMATED AQUATIC SYSTEMS BY LOLIGO SYSTEMS. LOLIGO SYSTEMS IS THE SOLE MANUFACTURER OF AUTORESP SOFTWARE, TREADMILL SWIMTUNNEL RESPIROMETER, AND INTEGRATED OXYGEN DIPPING PROBE. DELIVERY BY 09/30/2024. ***THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS AND NO SOLICITATION PACKAGE IS AVAILABLE. HOWEVER, FIRMS THAT BELIEVE THEY CAN FULLY MEET THE GOVERNMENT'S REQUIREMENTS MAY SUBMIT SUBSTANTIATING DOCUMENTATION IN WRITING TO THE IDENTIFIED POINT OF CONTACT WITHIN 15 DAYS AFTER PUBLICATION OF THIS SYNOPSIS. SUCH DOCUMENTATION WILL BE EVALUATED SOLELY FOR THE PURPOSE OF DETERMINING WHETHER OR NOT TO CONDUCT THIS PROCUREMENT ON A COMPETITIVE BASIS. A DETERMINATION BY THE GOVERNMENT NOT TO CONDUCT A COMPETITIVE PROCUREMENT, BASED UPON RESPONSES TO THIS NOTICE, IS SOLELY WITHIN THE DISCRETION OF THE GOVERNMENT. ORAL COMMUNICATIONS ARE NOT ACCEPTABLE IN RESPONSE TO THIS NOTICE.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:143021-24-0179JRW
  1. Special NoticeCurrentApr 11, 2024

    LOLIGO SYSTEMS HARDWARE-SOFTWARE

    Notice fa7c7e5d2f0f47e3984fff027053030f on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Award made to FARO Technologies, Inc (Cage 0VGY2) in the amount of $70,864.70
68%
Sole Source / J&AOpen
This is a combined synopsis/solicitation for commercial supplies prepared in accordance with Part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation number 36C26225Q1470 is issued as a request for quote (RFQ) for scope system for endoscopic procedures. This acquisition is set-aside for Small Business concerns. This solicitation incorporates provisions and clauses and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. Model Number, Description, Quantity (ea) INS9900, HD Monitor, 16 INS9904, LED Scope, 1.9mm X 2M, 16 INS9902, HD Mini Scope, 1mm X 1M, 16 Salient Characteristics Must provide waterproofing borescope to be used at the sink. Must provide 1mm High Resolution Borescope. Must have a standalone touch monitor with a minimum of 13-inchs and provide 8.4-inch image of lumen being Inspected. Must have holsters to hold each Borescope in place on the monitor. Must be able to connect to the Pure Processing Ergonomic workstations with the Pure Processing Monitor mount. The monitors must be waterproof, as defined by the International Electro Technical Commission is IP65 and Borescopes are IP6. Must record, take pictures, and save to USB drive for documentation. Must have Automatic white balance - always in focus. Must have ergonomic one-plug borescope connector for easier handling. Must have annotation capabilities. Must have brightness adjustment for optimal imaging. The period of performance for this requirement is 90 days ARO. The Contractor shall furnish all supplies at The Greater Los Angeles VA Health Care System located at 11301 Wilshire Blvd, Los Angeles CA, 90073. Shipping included in cost. FOB is destination. NOTE: Potential offers must be aware that the items being acquired are procured as Brand Name or Equal. For those items that are “or equal”. The FAR Clause 52.211-6 Brand Name or Equal applies to this acquisition. Any items quoted as equal not conforming to the requirements of clause 52.211-6 will be considered non-responsive and not considered for award. The North American Industrial Classification System (NAICS) code for this requirement is 334516, Size Standard 1,000 Employees. The Contractor shall adhere to all federal and state laws and regulations in effect during the term of this contract. The Government intends to award a firm fixed price contract. Due to time constraints, responses to the solicitation shall be due on Thursday, September 17, 2026, at 12:00 PM PT Local Time. Offerors are advised that it is your responsibility to review and monitor the website frequently to ensure you have the most up to date information, including amendments. Correspondence or questions may be directed to Jasmine Pressley-Barnard, Contracting Officer at jasmine.pressley-barnard@va.gov with "36C26226Q1470, SCOPE SYSTEM” in the subject line within 48 hours of release of this notice. Telephone inquiries will not be honored. Inquiries after the allotted period may not be responded to due to the time constraints of the procurement. All offerors must be registered in www.sam.gov to do business with the Government. Ensure your registration is correct, current and has not expired. 52.212-2 Evaluation -- Commercial Items (Oct 2014) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Lowest priced quotation that meets all the requirements of this solicitation that is both responsive and responsible. Acceptability of equipment shall be established by review of each submitted quotation by the designated evaluator(s). (b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified with a minimum of at least sixty days, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) Must include a completed copy of the provision at 52.212-3 -- Offeror Representations and Certifications -- Commercial Items, with this solicitation or ensure SAM.gov is updated with current information. The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition. The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. The following clauses also apply: Gray Market Items (a) Gray market items are Original Equipment Manufacturers (OEM) goods sold through unauthorized channels in direct competition with authorized distributors. This procurement is for new OEM medical supplies, medical equipment and/or services contracts for maintenance of medical equipment (i.e. replacement parts) for VA Medical Centers. No remanufactures or gray market items will be acceptable. (b) Vendor shall be an OEM, authorized dealer, authorized distributor or authorized reseller for the proposed medical supplies, medical equipment and/or services contracts for maintenance of medical equipment (i.e. replacement parts), verified by an authorization letter or other documents from the OEM, such that the OEM’s warranty and service are provided and maintained by the OEM. All software licensing, warranty and service associated with the medical supplies, medical equipment and/or services contracts for maintenance of medical equipment shall be in accordance with the OEM terms and conditions. (c) The delivery of gray market items to the VA in the fulfillment of an order/award constitutes a breach of contract. Accordingly, the VA reserves the right to enforce any of its contractual remedies. This includes termination of the contract or, solely at the VA’s election, allowing the Vendor to replace, at no cost to the Government, any remanufactured or gray market item(s) delivered to a VA medical Facility upon discovery of such items. (End of clause) In addition, the following clauses shall also apply: 52.202-1 Definitions Jun 2020 52.203-3 Gratuities Apr 1984 52.203-5 Covenant Against Contingent Frees May 2014 52.203-6 Restrictions on Subcontractor Sales to the Government Jun 2020 52.203-8 Cancellation, Rescission and Recovery of Funds for Illegal or Improper Activity May 2014 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity May 2014 52.203-16 Preventing Personal Conflicts of Interest Jun 2020 52.203-17 Contractor Employee Whistleblower Rights Nov 2023 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements Jan 2017 52.204-13 System for Award Management Maintenance Oct 2018 52.204-19 Incorporation by Reference of Representations and Certifications Dec 2014 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded Jan 2025 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters Oct 2018 Deviation Nov 2025 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations Nov 2015 Deviation Nov 2025 52.219-8 Utilization of Small Business Concerns Jan 2025 Deviation Nov 2025 52.222-1 Notice to the Government of Labor Disputes Feb 1997 52.222-35 Equal Opportunity for Veterans Jun 2020 52.222-36 Equal Opportunity for Workers with Disabilities Jun 2020 52.222-37 Employment Reports on Veterans Jun 2020 52.222-40 Notification of Employee Rights Under the National Labor Relations Act Dec 2010 52.222-50 Combating Trafficking in Persons Nov 2021 52.223-23 Sustainable Products May 2024 Deviation Nov 2025 52.226-7 Drug-Free Workplace May 2024 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving May 2024 52.229-4 Federal, State and Local Taxes Feb 2013 Deviation Sep 2025 52.232-17 Interest May 2014 52.232-33 Payment by Electronic Funds Transfer – System for Award Management Jul 2013 52.232-39 Unenforceability of Unauthorized Obligations Jun 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors Dec 2013 52.233-1 Disputes May 2014 52.233-3 Protest After Award Aug 1996 52.233-4 Applicable Law for Breach of Contract Claim (OCT 2004) 52.242-13 Bankruptcy Jul 1995 52.242-14 Suspension of Work Apr 1984 52.244-2 Subcontracts Jun 2020 852.203-70 Commercial advertising Jan 2008 852.232-72 Electronic submission of payment requests Nov 2012 852.237-70 Contractor responsibilities Apr 1984 The full text of a clause may be accessed electronically at the following: http://www.acquisition.gov/comp/far/index.html http://www.va.gov/oal/library/vaar/index.asp The following provisions shall also apply: 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Transactions Sep 2024 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation Jan 2017 52.204-7 System for Award Management Oct 2018 52.207-6 Solicitation of Offers from Small Business Concerns and Small Business Teaming Arrangements or Joint Ventures (Multiple-Award Contracts) Aug 2024 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations-Representation Deviation Nov 2025 52.209-5 Certification Regarding Responsibility Matters Deviation Nov 2025 52.209-7 Information Regarding Responsibility Matters Oct 2018 52.217-5 Evaluation of Options Jul 1990 852.233-70 Protest Content/Alternative Dispute Resolution Oct 2018 852.233-71 Alternate Protest Procedure Oct 2018
66%
Combined Synopsis09/18/2026
Small-Diameter Soil Cyclic Triaxial Testing System THIS IS NOT A SOLICITATION FOR PROPOSALS THIS IS A SOURCES SOUGHT SYNOPSIS ONLY This Sources Sought is for the purpose of identifying firms that can meet the following Bureau of Reclamation Requirements. The Bureau of Reclamation (BOR) has a requirement for Small-Diameter Soil Cyclic Triaxial Testing System, under NAICS 334519 - Other Measuring and Controlling Device Manufacturing. GOVERNMENT DISCLAIMER This notice is issued solely for market research and planning purposes. It is not a solicitation and does not obligate the Government to issue a solicitation or award a contract. The Government will not pay for information submitted in response. Responses may be used to assess commercial availability, technical feasibility, potential sources, socioeconomic participation, and acquisition strategy. ANTICIPATED REQUIREMENT: New Cyclic Triaxial System - Triaxial testing system with cell. - Electronic components to connect to existing 110V power. - Pressure transducers. - 10 kN internal load cell. - Load ram assembly. - Controller system. - Data acquisition system. - Hydraulic installation kit. - Lifting system. - Base pedestal, top cap, and preparation kits for 38 mm, 50 mm, 70 mm, and 100 mm specimens. - On-specimen LVDTs with signal conditioning kit, consisting of two axial and one radial for each of the 38 mm, 50 mm, and 70 mm specimen sizes. - Displacement transducers. - Control software for advanced dynamic cyclic loading control, including load control. Minimum Overall Requirements - System shall directly interface with the GDS Instruments cyclic triaxial testing system already owned by Reclamation, including existing hardware and software. - Performance specifications conforming to ASTM D3999. - High-accuracy electromechanical actuators. - 10 kN capacity axial load cell. - Axial force accuracy of less than 0.1% of full-scale output and less than 0.4 kN for a 10 kN load cell. - USB computer interface. - 100 mm displacement range with a resolution of 0.2 micrometers. - Operating frequency of 5 Hz. - Ability to test specimens up to 101 mm in diameter. - Ability to deliver cell pressures up to 2 MPa. - Delivery of the entire system to Reclamation's Technical Service Center, Building 56, Door S-7, Denver, Colorado. - Installation and setup shall be simple enough to be completed by Reclamation personnel. Warranty, Experience, and Support Requirements - The system shall include at least a one-year warranty provided by the supplier. - The system must be provided by a supplier who can demonstrate successful construction, commissioning, and sale of at least 5 similar systems worldwide. - Supplier must have qualified service technicians available for any ongoing support, maintenance and repair. - The systems shall be plug-and-play, manufactured with new parts, and include current calibration documentation. Information Requested from Industry Interested parties should submit a concise capability statement addressing each item below and cross-reference supporting product literature. 1. Business name, address, website, point of contact, telephone number, and email address. 2. SAM.gov Unique Entity Identifier, CAGE code, and current registration status. 3. Business size and applicable socioeconomic categories under NAICS 334519, Other Measuring and Controlling Device Manufacturing. 4. Manufacturer, make, model, and commercial product name for each proposed system and major component. 5. Explanation of conformity with ASTM D3999 and any limitations or optional components. 6. Description of control and data acquisition software, dynamic loading and load-control functionality, licensing, operating-system support, and data export. 7. Warranty coverage and duration, technical support, qualified service technician availability, spare-parts availability, and repair approach. 8. Evidence of successful construction, commissioning, and sale of at least 5 similar systems worldwide. 9. Estimated delivery lead time and schedule risks. 10. Country of origin, manufacturing location, and ability to manage customs, import, shipping, and delivery to Denver, Colorado. INSTRUCTION FOR SUBMISSION: Interested parties may submit a response in an electronic format only via email to ConnieAnn Tudela-Kately, connieann_tudela-kately@ios.doi.gov no later than November 6, 2026, 5PM Eastern. Electronic files should be in Microsoft Office Word or PDF format. All information should be UNCLASSIFIED material only. Any proprietary information must be marked as such, the Sources Sought information should not exceed a total of 10 one-sided 8 1/2x11 pages, with one-inch margins, and font no smaller than 12 points.
66%
Market Research11/06/2026
Request for Proposal: RFP No. PR452359 Dilution Refrigeration Systems Amendment 01: Extends Offers Due By Date to 11/16/2026 at 5 p.m. EST Adds Attachment L - Bidder's Questions 11-03-2026 Oak Ridge National Laboratory (ORNL), managed by UT-Battelle for the US Department of Energy, is inviting you to submit a Firm Fixed Price proposal for the following item listed below. An award will be made based on the lowest priced, technically acceptable proposal. Summary of Work/Description of Items: A dilution refrigerator system consisting of a Gas Handling System Refrigerator and two identical He3/He4 dilution inserts as specified and in accordance with the attached RFP documents.
63%
Solicitation11/16/2026
63%
Market Research12/05/2026

Additional Details

Solicitation Number

143021-24-0179JRW

Archive Date

Apr 27, 2024

Office Address

SEATTLE, WA, 98115