GovChime
Notice ID: 39cfc19ea146403284dbd6cb892e742cPresolicitationArchived

Power Plant and Electrical Distribution System Upgrades at the U.S. Consulate General in Kolkata, India

Archived on June 29, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM GMT+2
Posted
May 28, 2026
Notice type
Presolicitation
Set-aside
No Set aside used
NAICS
238210: Electrical Contractors and Other Wiring Installation Contractors
Agency
Department of State

Notice details

Office
ACQUISITIONS - RPSO FRANKFURT
Place of performance
Kolkata
Last updated
Oct 29, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
19GE5026R0088
Notice ID
39cfc19ea146403284dbd6cb892e742c

Description

The Regional Procurement Support Office, Frankfurt provides the following Pre-Solicitation Notice regarding the issuance of a Request for Proposal (RFP) for:

Power Plant and Electrical Distribution System Upgrades at the U.S. Consulate General in Kolkata, India

The Regional Procurement Support Office in Frankfurt, Germany, intends to issue a Firm Fixed-Price Construction type contract during the third quarter of calendar year 2026.

The successful contractor shall provide construction services, contract coordination, and supervision, including but not limited to the management and construction necessary to meet the requirements of the contract within the established timeframe.

The United States Government Department of State (DOS), Bureau of Overseas Building Operations (OBO) requires Power Plant and Electrical Distribution System Upgrades at the U.S. Consulate General in Kolkata, India.

The project will selectively improve the electrical backup power system by replacing all four existing generators, upgrading outdated switchgears, implementing flood mitigation measures around the existing utility building, and upgrading the Power Plant and Electrical Distribution System to current code requirements to support the continued operations of the existing U.S. Consulate General compound.

The magnitude of this project is anticipated to be between $5.000.000,00 and $7.000.000,00.

Pursuant to the Foreign Service Buildings Act of 1926, as amended (22 U.S.C. 302), competition is limited to American-owned firms and firms from countries that grant substantially equal access to American companies for comparable diplomatic and consular construction projects. The definition of “American-owned firm” is set forth in DOSAR provision 636.236-71, which will be included in the forthcoming solicitation. In accordance with DOSAR 636.104-70(c), qualifying American-owned firms will receive a ten percent price evaluation preference, provided that two or more such firms submit responsive offers.

Companies interested in the solicitation should express their interest by written correspondence, no later than June 14, 2026, 15:00 CEST at the following email addresses baltaa@state.gov and MUST include the following information: Name of Firm, Name, Telephone, Email Address of Point of Contact and Complete Physical and Mailing Address of Firm. Please do not telephone.

Firms shall be knowledgeable in written and spoken English.

The solicitation package/documents shall not be placed on SAM.gov.  Only companies submitting a letter of interest and complete “Application for Solicitation Document” check list attached hereto may receive a copy of the solicitation package/documents when available.

APPLICATION FOR SOLICITATION DOCUMENTATION CHECK LIST

In applying for the solicitation material, you are acknowledging that your company can reach compliance with the following highlighted requirements included in the solicitation.

In accordance with DOSAR 652.242-73 AUTHORIZATION AND PERFORMANCE (AUG 1999), it will be necessary for your organization to possess authorization to operate and do business in the country in which this contract will be performed. Contractors shall be required to provide:

a.   A thorough description as to what steps you have taken to investigate all requirements to obtain authorization to perform in the given country,

b.   Details of your findings and a description of what your organization will be required to undertake to obtain licensing, and

c.   Specific information concerning the period of time you anticipate it will take to obtain appropriate authorization.

You will be required to provide information that clearly shows you are able to perform work in India.  Any entry or work visa issues requirements must be clearly discussed with a plan to mitigate any risk clearly identified. 

Irrevocable Letters of Credit (ILOC):  The successful contractor will be required to provide the government with surety in the form of Irrevocable Letters of Credits totaling 40% of the value of the contract. 

If you have been SAM* registered, please include below. Please note that the requirement to be SAM registered, will be a mandatory requirement upon contract award.

UEI number: _______________________      SAM Registered:      (     ) Yes     (     ) No

*          System for Award Management: https://sam.gov

The failure to provide the above documentation when submitting your proposal may result in your proposal being found technically unacceptable and removed from the competition without further discussions.

Solicitation and award will be subject to the laws and regulations of the United States of America. This requirement is being competed utilizing full and open competition procedures.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

ANDRA BALTA

Secondary Contact

Documents

No documents available.

Lifecycle

  1. 3
    Version 3PresolicitationArchivedCurrent

    Power Plant and Electrical Distribution System Upgrades at the U.S. Consulate General in Kolkata, India

    Notice 39cfc19ea146403284dbd6cb892e742c on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
See attached documents. Update 0002 revises question due by date. Update 0003 extends the due by date.
60%
Combined Synopsis08/19/2026
This is a combined synopsis/solicitation for commercial construction items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 127EAX27Q0015 is issued as a Request for Quotation (RFQ) for Electrical Upgrades to the Grant County Aeriel Fire Base and Tanker Cache on the Gila National Forest. This project consists of furnishing and installing a complete, code-compliant electrical distribution system to support a designated concrete pad area at the tanker base/fire cache, and the upgrade of an existing electrical/motor control panel serving the retardant pumping system. The completed system shall be suitable for continuous outdoor service in a high-use industrial environment and designed for durability, safety, and future expansion. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 238210. The small business size standard is $19M. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency.
57%
Combined Synopsis12/11/2026
REQUEST FOR INFORMATION (RFI) / MARKET RESEARCH NOTICE: This is a request for information (RFI) for market intelligence and for informational purposes only. This announcement does not constitute a solicitation or a request for proposal (RFP), and no solicitation is currently available. Participation in this RFI is strictly voluntary. The Government will not be obligated to award any agreement or contract because of this RFI, nor will it reimburse respondents for any costs associated with the preparation or submission of information. Submitting a response will not affect a firm’s ability to submit a proposal should formal solicitation be issued in the future. NAICS CODE: 238210 Electrical Contractors and Other Wiring Installation Contractors SMALL BUSINESS STANDARD: $19,000,000.00 NOTE: While Other Transaction Authority is not subject to FAR based small business regulations, this NAICS code is provided for market research to help the Government understand the size and demographics of the interested industrial base. PROGRAM/PROJECT OVERVIEW: The 11th Contracting Squadron (11 CONS), District of Washington, has a requirement to execute the design-build upgrades, repairs, and/or replacements to the deteriorated Electrical Switching Stations located at B18 and B168 on Joint Base Anacostia Bolling (JBAB) that includes developing a solution to establish a connection by high voltage electrical redundancy cable. The Government is evaluating the feasibility of executing these requirements via Progressive Design-Build (PDB) utilizing an Other Transaction (OT) Agreement under the statutory authority of 10 U.S.C. § 2808a. This project summary establishes the operational requirements, technical baseline, and acquisition framework for the Progressive Design-Build (PDB) Other Transaction Authority (OTA) effort to modernize Joint Base Anacostia-Bolling’s (JBAB) primary electrical infrastructure. Project Title JBAB Electrical Switching Stations (ESS B18 & B168) Modernization & Grid Redundancy Location Joint Base Anacostia-Bolling (JBAB), 11th Wing Acquisition Strategy Progressive Design-Build (PDB) via Other Transaction Authority (OTA) Primary Objective Engineer comprehensive design packages to repair, upgrade, and interconnect deteriorated electrical switching infrastructure Primary Deliverables 100% executable design packages, specifications, and implementation schedules for ESS upgrades, facility hardening, cable routing, and smart-grid wireless SCADA/telemetry Scope Breakdown by Facility & Component ESS B18 (Switching Station Upgrade) • Full replacement of legacy switchgear with FR3 fluid, air-insulated switchgear (per latest UFC 3-550-01) • Life-cycle cost and sustainability integration (UFC 1-200-02) • Thermal partition separating switchgear room from power generation bay • Dedicated HVAC system and air conditioning ductwork • Sized space heating units • High-efficiency interior LED lighting ESS B168 (Repair, Upgrade & Hardening) • Complete switchgear replacement mirroring ESS B168b using FR3 air-insulated switchgear (UFC 3-550-01) • Sustainable design practices (UFC 1-200-02) • Dedicated single HVAC unit and duct system • Interior/exterior high-efficiency LED flood/task lighting • Raised roof profile with comprehensive crack sealing/insulation • Foundation pillar repairs, crawl space waterproofing, and rainwater gutter system • Motorized roll-up door, cyber/physical cypher-locked access doors, and motorized loading dock ramp with widened sidewalk High-Voltage Redundancy Cables • Design 4-circuit bidirectional interconnect (8 cables total) connecting ESS B18 and ESS B168 • Baseline routing derived from 2025 Engineering Study • Mandatory underground routing preference across base footprint • Aerial routing permitted strictly as secondary exception where subsurface obstructions prevent underground installation Wireless SCADA & Grid Telemetry • Air Force long-term smart-grid wireless connectivity architecture • Cell-enabled control panels reporting directly to electric shop web interface without physical comm trunk lines • Relay-to-control panel comm wiring for ESS B18 and ESS B168 • Additional telemetry control panel integrated into ESS B4505 (sub-station to B18) to monitor sub-station power load profiles Key Technical Standards & Compliance Baseline UFC 3-550-01 Exterior Electrical Power Distribution Mandates modern FR3 biodegradable, fire-resistant fluid dielectric air-insulated switchgears, significantly mitigating environmental and thermal hazards. UFC 1-200-02 High Performance and Sustainable Building Requirements Governs energy efficiency, life-cycle cost effectiveness, indoor environmental quality, and durable materials integration. PDB / OTA Authority Prototype / Collaboration Framework Fosters early contractor involvement during Phase 1 design, mitigating unforeseen site and subsurface risk prior to Phase 2 construction commitment. INFORMATION REQUESTED: Interested industry partners are requested to respond to the following questions to help shape the final acquisition strategy: Company Profile: Q1. Business Name Q2. Address Q3. Point of Contract (Name, Title) Q4. Phone Number Q5. Email Address Q6. Unique Entity ID Q7. Cage Code Q8. Socioeconomic Status (Other Than Small, Small, 8(a), SDVOSB, etc.) Q9. Participating Role (Prime Contractor, Subcontractor, Design Firm, Other) Other Transaction Authority (OTA) & Statutory Compliance: Q10. OTA Experience – Describe your firm’s previous experience, if any, executing projects utilizing OTA. Q11. What project characteristics make PDB OTA particularly advantageous or disadvantageous for this requirement? Progressive Design-Build (PDB) / Early Contractor Involvement: Q12. What minimum level of detail (e.g., Statement of Need, conceptual site plans, target budget) does your firm require prior to entering Phase 1 (Design/Pre-construction) to feel confident in the project's viability? Q13. What collaborative mechanisms (such as joint design charrettes, target-value design workshops, or phased scoping approvals) do you recommend the Government implement in the first 30-90 days to rapidly transition from a "blank page" to a mutually agreed-upon baseline? Q14. Describe your experience executing Progressive Design-Build, Construction Manager at Risk (CMAR), or other highly collaborative delivery methods where designer and builder worked collaboratively with the owner before locking in a Guaranteed Maximum Price (GMP). Feedback on the Acquisition Strategy & Alternatives: Q15. Does the proposed PDB-OTA strategy incentivize your firm to participate? Why or why not? Q16. Are there alternative acquisition strategies, commercial phasing arrangements, or risk-sharing terms that the Government has not considered that would yield a higher quality facility, faster delivery, or lower cost? Bonding Capability: Q17. Specify your maximum bonding (single and aggregate) as a sole prime contractor and/or as a joint venture. SUBMISSION INSTRUCTIONS: Please submit your responses by 30 November 2026 at 1000 Eastern Standard Time (EST) to Mr. Terry Agena at terry.agena.1@us.af.mil and MSgt Quortez Dorsey quortez.dorsey@us.af.mil. The Government welcomes candid industry feedback and recommendations regarding commercial practices, agreement terms, project phasing, risk sharing, governance, pricing approaches, and other considerations that could improve successful execution of these projects under 10 U.S.C. § 2808a. Interested firms are encouraged to add themselves to the Interested Vendors List associated with this announcement on SAM.gov to receive future updates. Note: Do not submit proprietary trade secrets, protected technologies, or classified information in your response. All feedback received will be handled as public market research to shape the Government's final acquisition approach.
57%
Market Research11/30/2026
11/4/2026 - Abstract posted. -- 10/21/2026 - Amendment 0005 - Incorporate revised response to bidder's question #13, update construction wage determination, and extend bid due date to November 4, 2026, no later than 2:00 pm CST. -- 10/15/2026 - Amendment 0004 - Invite bidders who submitted acceptable technical proposals in Step-One to submit a bid in Step-Two. Step-Two Bid due date is October 28, 2026, no later than 2:00 pm CST. Only American Alarm Co., Inc. and Elite Pacific Construction, Inc. are allowed to submit bids. Further bid instructions will be e-mailed to these contractors. -- 8/17/2026 - Amendment 0003 - Extend Step-One technical proposals due date to August 26, 2026, no later than 1:00 pm CST. -- 8/5/2026 - Amendment 0002 - Incorporate bidder's question with response. -- 8/3/2026 - Amendment 0001 - Incorporate pre-bid site visit meeting minutes, sign-in sheet, photo, responses to bibbers' questions, increase period of performance. Correct soliciation number on Instructions for Two-Step Sealed Bidding document. -- THIS IS A COMBINED SYNOPSIS-SOLICITATION OF PROPOSED CONTRACT ACTION. The Federal Bureau of Prisons (FBOP) is issuing a Two-Step Invitation for Bid (IFB). The solicitation will result in one (1) firm-fixed-price contract for a project titled Upgrade Fire Detection System at the Federal Detention Center (FDC) located in Honolulu, Hawaii. FDC Honolulu is a federal correctional institution located at 351 Elliott Street, Honolulu, HI 96819. The project consists of furnishing all equipment, materials, and labor for the complete construction to upgrade the fire detection system at the FDC Honolulu. The specification and construction drawings included in the attachments of this solicitation provides the requirements for the project. Site Visit: A site visit is planned for Tuesday, July 21, 2026. The details are in solicitation attachment Instructions for Two-Step Sealed Bidding, pages 3-4. Invitation For Bid (IFB) Evaluation Criteria: This solicitation and resulting contract is using the Two-Step Sealed Bidding procurement method as described in FAR Deviation 14.211. The two-step procedure is a combination of competitive procedures designed to obtain the benefits of sealed bidding while ensuring only technically acceptable firms participate in the priced sealed bid. The process allows for the Step-One technical proposal submission and evaluation to be performed to identify firms eligible for Step-Two. Contractors participating in the solicitation will submit a technical proposal in accordance with the solicitation attachments Instructions for Two-Step Sealed Bidding and Step-One Technical Proposal Factors. Submissions will be evaluated for acceptability in accordance with solicitation attachment Step-One Technical Proposal Evaluation. Under this bidding process, Step-One consists of the request for technical proposal, evaluation, and (if necessary) discussion of a technical proposal. The submission requirements of Step One, Request for Technical Proposal, shall not include any prices or pricing information. Only one (1) technical proposal may be submitted by each offeror. The technical proposals will be evaluated for technical acceptability. A notice of “acceptable” or “unacceptable” will be forwarded to each Step-One offeror upon completion of the technical proposal evaluation and final determination. The names of the offerors that submitted acceptable technical proposals will be listed on the Government’s SAM.gov solicitation posting for the benefit of prospective subcontractors. In Step-Two, an amendment to the solicitation will be issued along with any updates to the technical specifications and construction drawings to only those bidders whose technical proposals are determined to be acceptable in Step-One. The normal sealed bidding process in FAR Part 14 will be followed in Step-Two. Only bids based upon technical proposals determined to be acceptable, either initially or as a result of discussions for Step- One, will be considered for award. Bidders must comply with the 100% completed specifications and construction drawings and the bidder’s acceptable technical proposal. Bid bonds are not required to be submitted with the Step-One technical proposal. Bid bonds will be required to be submitted with the Step-Two bid submission. Payment and Performance Bonds will be required for the full amount (100%) at the time of contract award before the Notice to Proceed (NTP) can be issued. Any secured/locked documents (Specifications and Drawings) with the solicitation will require an active vendor registration at https://SAM.gov as well as your Marketing Partner Identification Number (MPIN) associated with your System for Award Management (SAM) registration. The controlled documents will not be emailed. If you encounter problems accessing these documents, please contact the Federal Service Desk at 866-606-8220. Pursuant to Federal Acquisition Regulation (FAR) Companion 36.101-3, the estimated magnitude of the project lies between $5,000,000 and $10,000,000. (NOTE: This range is not meant to imply that the project has necessarily been estimated/budgeted to the maximum of the selected range. It merely conveys that the estimate/budget lies somewhere within that range). The North American Industrial Classification System (NAICS) code applicable to this requirement is 238210 with a corresponding small business size standard of $19 million. The solicitation will be distributed solely through the SAM database at https://SAM.gov. Hard copies of the solicitation will not be made available. The website provides download instructions. All future information about this solicitation, including any amendments, will also be distributed solely through this website. Interested parties are responsible for continuously monitoring this website to ensure that they have the most recent information about this proposed contract action. This is a 100 percent small business set-aside. In order to qualify for award, your business size metrics information entered in your SAM registration must be less than or equal to the size standard specified above (see provision 52.219-1 in the Representations & Certifications section of your registration and view the table therein listing NAICS codes and your indicated business size relative to the assigned NAICS code above). Each bidder's SAM registration will be reviewed by the Government to confirm that your business size meets the small business size standard requirement. All bidders are urged to double check their SAM registration and update as necessary, including the size metrics information. This solicitation is intended only for those who would be entering into a Prime contract with the FBOP for the entirety of this project. The FBOP does not award subcontracts. Subcontracts (if applicable/necessary) are the responsibility of the Prime contractor. The FBOP has no privity of the contract with subcontractors. IMPORTANT: Any contractor interested in obtaining a contract award with the FBOP must be registered in the System for Award Management (SAM) at https://SAM.gov. If you have questions about SAM.gov, Government procurements in general, or need assistance in the preparation of your bid/proposal/offer, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org.
56%
Combined Synopsis11/04/2026
I. PURPOSE AND DISCLAIMER**********************The U.S. Army Corps of Engineers (USACE), Chicago District, is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support the requirement for upgrading our Commercial Gear Backup Power (CGBP) and associated control system at our electronic fish barrier located in Romeoville, Illinois. We are seeking to identify qualified Small Business concerns (including 8(a), HUBZone, SDVOSB, WOSB, and Small Business Joint Ventures/Teaming Arrangements) and Other-Than-Small Business concerns capable of performing this requirement. The intention is to procure these services on a competitive basis.**********************BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES (IN FULL OR IN PART) OR PROCURED THROUGH FULL AND OPEN COMPETITION, and multiple awards MAY be made. All Small Business Set-Aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.**********************DISCLAIMER**********************THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMMATION PERTAINING TO THIS REQUIREMENT. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought.********************************************II. COMPREHENSIVE TECHNICAL DESCRIPTION and PROJECT SCOPE********************************************The Chicago Sanitary and Ship Canal (CSSC) Electric Dispersal Barrier facility requires a complex industrial electrical power generation, backup power, and automation and control system modernization project. This system is a critical component of the federal effort to prevent the movement of invasive aquatic species between the Great Lakes and Mississippi River basins. **********************Specifically, USACE needs to upgrade the backup generator and switchgear control systems at Permanent Barrier 1 (PB1) to correct unreliable operation caused by deficiencies in the original design, configuration, and wiring. The project requires replacing generator controllers, modernizing breaker controls and communications, and rebuilding the control software and operator interfaces to improve reliable operation on utility and backup power. Work will require testing, operator training, and a phased changeover to maintain continuous barrier operations. Work will be performed at an active, mission-critical facility requiring careful coordination with ongoing operations, planned equipment outages, and system changeovers to maintain operational readiness and minimize disruptions. A critical requirement is the integration of new equipment into an active industrial facility while protecting existing operations. The anticipated work may include engineering, design review, equipment upgrades and replacement, control system programming, integration, testing, and commissioning of interconnected electrical and industrial automation systems. ******************************************************************TECHNICAL CAPABILITIES:******************************************************************The project requires specialized expertise in: a) generator synchronization and load management, b) switchgear automation, c) protective relaying, d) programmable logic controllers (PLCs), e) human-machine interfaces (HMIs), industrial communications, and associated monitoring and data management systems.**********************Contractors must possess the technical capabilities necessary to work with the existing systems and integrate new equipment while maintaining compatibility and functionality. The existing facility incorporates Rockwell Automation ControlLogix PLCs, FactoryTalk View SE, FactoryTalk Transaction Manager, Microsoft SQL Server, Basler generator synchronization and control equipment, Schweitzer Engineering Laboratories (SEL) protective relays and RTAC equipment, and DEIF generator controllers. ATTACHMENT NOTICE: Interested parties must carefully review Attachment 1 (Equipment_SOW.xlsx PB1 Equipment Modernization and SOW Matrix) attached to this notice in PIEE, the DoW Procurement Integrated Enterprise Environment, which details the specific equipment removals, modifications, additions, hard-wired control conversions, I/O transitions, and as-built drawing updates (across four separate contractor drawing sets) required under our anticipated scope.**********************Contractors must demonstrate their capability of obtaining a specialized Master Systems Integrator (MSI) or Industrial Automation and Control Systems (IACS) engineering firm to perform any needed engineering, programming, integration, testing, commissioning, and troubleshooting of the complex interconnected industrial control systems.**********************Contractors must demonstrate their ability to obtain qualified personnel. Qualified personnel include Electrical Generating Systems Association (EGSA) certified technicians or personnel possessing equivalent documented qualifications to support generator-related engineering, design reviews, integration, testing, and commissioning. If proposing to use equivalent, provide what documentation your firm considers as equivalent for USACE consideration.**********************The contractor must possess the technical and organizational capabilities to execute phased modifications, coordinate authorized shutdowns and system changeovers, implement temporary control arrangements where necessary, perform pre-commissioning and acceptance testing, and develop contingency measures to minimize operational disruptions and maintain the safety, reliability, and continuity of existing barrier operations.**********************III. REQUESTED INFORMATION FROM INTERESTED PARTIES********************************************Interested firms are invited to submit a Capability Statement (not to exceed 10 pages) addressing the following four (4) sections after reviewing the technical capability narrative above and Attachment 1 (Equipment_SOW.xlsx):SECTION A: ADMINISTRATIVE AND BUSINESS SIZE********************************************1. Company Name, Address, Point of Contact, telephone number and email, CAGE Code, and Unique Entity Identifier (UEI).**********************2. Business Size under NAICS 238210 ($19.0M Size Standard) and all applicable socioeconomic designations.**********************3. If proposing as a Small Business, confirm your understanding of FAR 52.219-14 (Limitations on Subcontracting) and your ability to perform at least 25% of the cost of contract performance (excluding the cost of materials) with your own organization or similarly situated small business entities. **********************4. Should this requirement be solicited as Full and Open Competition, other-than-small-business offerors will be required to submit an acceptable Small Business Subcontracting Plan in accordance with RFO 19.109 and FAR 52.219-9, as applicable. All respondents are asked to: a) Describe your experience meeting small business subcontracting goals on comparable construction or modernization projects, b) Identify potential subcontracting opportunities for small businesses within the attached scope of work, c)Provide preliminary estimated subcontracting percentages by socioeconomic category (e.g., WOSB, SDVOSB, HUBZone, SDB), and d) Identify anticipated challenges and strategies to maximize small business participation during execution.**********************SECTION B: TECHNICAL AND INTEGRATION EXPERIENCE********************************************1. TECHNICAL CAPABILITIES. Tailored capability statements addressing the particulars of this effort under the technical capabilities section above, with appropriate documentation supporting claims of organizational and staff capability. Detail what specific technical skills does your company possess which ensure capability to perform the tasks. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements, as well as experience of managing similar teams in the past.********************2. EQUIPMENT LIST REVIEW: Confirm your firm has reviewed Attachment 1 (Equipment_SOW.xlsx) and describe up to three (3) comparable projects executed within the past seven (7) years involving turnkey switchgear/generator control remediation, hard-wired relay conversions, and multi-vendor integration (Rockwell ControlLogix, SEL Relays/RTAC, Basler, and FactoryTalk View SE). Clearly delineate whether experience is based upon the prime, or any proposed subcontractors.**********************3. CERTIFICATIONS AND QUALIFICATIONS: Confirm your proposed teams compliance with the EGSA certification requirement or identify the equivalent documented qualifications your personnel possess to support this scope. Identify whether your proposed lead personnel hold: (a) Control Systems PE Licensure, (b) EGSA Certification, or (c) CSIA/Rockwell Integrator Certification.**********************4. PHASED CUTOVER AND FAT: Describe your firms capability to perform Factory Acceptance Testing (FAT), simulation prior to site delivery and execute a phased cutover at an active 24hr, 7day a week facility without unplanned outages.**********************SECTION C: COMMERCIAL SOLUTIONS AND LEAD-TIME********************************************1. COMMERCIAL SOLUTIONS: Based on your review of Attachment 1, identify what commercial solutions or minor modifications are available in the marketplace to meet these functional requirements.**********************2. ESTIMATED LEAD-TIME: Provide an estimated lead-time required to procure the necessary hardware components and complete the on-site upgrades, testing, drawing updates, and commissioning.********************************************IV. INSTRUCTIONS FOR RESPONSE SUBMISSION**********************Please submit capability packages electronically through the PIEE Solicitations Portal or via email to the designated Point of Contact by December 2, 2026, at 1:00 PM CST. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to the Contract Specialist, Jane Doe, in either Microsoft Word or Portable Document Format (PDF). All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government.**********************The Government will evaluate market information to ascertain potential market capacity to: 1) provide services consistent, in scope and scale, with those described in this notice and otherwise anticipated; 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements; 3) implement a successful project management plan. **********************All questions must be submitted to the contract specialist.
54%
Market Research12/02/2026

Additional Details

Solicitation Number

19GE5026R0088

Archive Date

Jun 29, 2026

Place of Performance Country

INDIA

Office Address

WASHINGTON, DC, 20520