GovChime
Notice ID: b780bf70488d4e5bb509c636c915514aAward NoticeAwardedArchived

L.S Starrett Gage Block Testers

Awarded on June 22, 2026. Full description on SAM.gov.

Awarded tounder N68335-26-P-0074 (source: SAM.gov award notice)• $41.8K

Overview

Posted
June 22, 2026
Notice type
Award Notice
NAICS
332216: Saw Blade and Handtool Manufacturing
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVAIR WARFARE CTR AIRCRAFT DIV
Place of performance
Gulfport, Mississippi, 39501
Last updated
Oct 29, 2026
First published
Last updated on SAM.gov
Award date
Jun 22, 2026
Award amount (SAM.gov award notice)
$41.8K

Identifiers

Solicitation number
N6833526Q0392
Notice ID
b780bf70488d4e5bb509c636c915514a
Award number (PIID)
N68335-26-P-0074

Description

The Naval Air Warfare Center Aircraft Division (NAWCAD) Lakehurst, New Jersey awarded a contract to procure the following L.S. Starrett Gage Block Sets: QTY 1 P/N RS88A1 (CLIN 0001, Each) QTY 1 P/N SC88A1X (CLIN 0002, Each) QTY 1 P/N SS8A1X (CLIN 0003, Each) QTY 2 P/N SS88A1X (CLIN 0004, Each)

Full description on SAM.gov

Award Overview

Award Number

N68335-26-P-0074

Award Amount (SAM.gov award notice)

$41.8K

Award Date

Jun 22, 2026

Awardee

Awardee UEI

FM84JZVF9D13

Awardee CAGE Code

4J701

Original Solicitation

Notice ID: b780bf70488d4e5bb509c636c915514a

Posted Date: Jun 22, 2026

Original Response Deadline: Not specified

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

  1. 3
    Version 3Combined Synopsis/SolicitationArchived

    L.S Starrett Gage Block Testers

    Notice 1ca50aff0eb74d01b86f327ab007ee71 on SAM.gov

  2. 6
    Version 6Award NoticeArchivedCurrent

    Type changed from Combined Synopsis/Solicitation to Award Notice

    L.S Starrett Gage Block Testers

    Notice b780bf70488d4e5bb509c636c915514a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This Sources Sought notice is being posted to satisfy the requirements of Defense Federal Acquisition Regulation Supplement (DFARS) 206.302-170. The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ intends to negotiate on a sole-source basis with EAA Tools, LLC (EEA), CAGE: 5LNR7, for the award of a contract. The designated contractor, EEA, shall provide to NAWCAD Lakehurst the manufacture and delivery of the Main Rotor Spindle Pry Bars (P/N SPB-60-RS, NSN 3040-01-722-4706) for the Royal Australian Navy (RAN); Danish Defense Acquisition and Logistics Organization (DALO); and the India Navy (IN) in support of the MH-60R program. The applicable North American Industry Classification System (NAICS) code for this requirement is 332216 (Saw Blade and Handtool Manufacturing). The Product Service Code (PSC) is 3040 (Miscellaneous Power Transmission Equipment). THIS SOURCES SOUGHT IS NOT A REQUEST FOR PROPOSAL. It is a market research tool being used to determine potential and eligible small and large businesses, capable of fulfilling the requirements described herein prior to determining the method of acquisition and issuance of a Request for Proposal. The Government is not obligated to and will not pay for any information received from potential sources as a result of this Notice. EAA Tools, LLC. is the OEM, sole designer, developer and manufacturer of the Main Rotor Spindle Pry Bar. The Main Rotor Spindle Pry Bar securely attaches to spindle damper mount and provides required leverage and stability to manipulate main rotor spindle assembly on aircraft for various maintenance requirements to include access to spindle mounts bolts and pitch control rod removal/re-installation. The Government intends to solicit and negotiate this requirement under the authority of 10 U.S.C. 3204(a)(1), "Only one responsible source and no other supplies or services will satisfy agency requirements" for this action. (THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS.) Responsible, interested parties, however, may identify their interest by submitting a capabilities statement. The Government will consider all information received prior to the closing date of this notice. A determination by the Government not to compete this procurement based upon responses to this notice is solely within the discretion of the Government. The Government will not pay for any responses received. There is no commitment by the Government to issue any solicitations, make an award or awards, or be responsible for any monies expended by any interested parties before award of a contract for the efforts mentioned above. Information provided herein is subject to change and in no way binds the Government to solicit for or award a contract. No telephone responses will be accepted.
-Market Research11/12/2026
The Surface Combatant/Gas Turbines Engineering Branch of the Naval Surface Warfare Center, Philadelphia Division (NSWCPD) is the In-Service Engineering Agent (ISEA) for the Ship Service Gas Turbine Generator (SSGTG). The 250-KS4 (or Redundant Independent Mechanical Start System (RIMSS) gas turbine engine is one of two ways to start the SSGTG. It is also the only means to start a SSGTG in a dark ship scenario. The Navy is establishing intermediate-level (I-level) procedures for the replacement of turbine assemblies at Regional Maintenance Center (RMC) turbine shops. This initiative will provide the Navy with a repair capability for 250-KS4s not previously possessed, significantly reducing repair turnaround times and enabling the refurbishment of previously unusable carcasses. The procurement of specialized support equipment (SSE) is a critical prerequisite for implementing these repair procedures.Code 424 is establishing intermediate-level (I-level) procedures for the replacement of turbine assemblies at Regional Maintenance Center (RMC) turbine shops. This initiative will provide the Navy with a repair capability for 250-KS4s not previously possessed, significantly reducing repair turnaround times and enabling the refurbishment of previously unusable carcasses. The procurement of specialized support equipment (SSE) is a critical prerequisite for implementing these repair procedures.
-Pre-Solicitation11/19/2026
Pursuant to FAR 15.101(c)- This is a Request for Information only. There is no solicitation package available. This Sources Sought is being posted to satisfy the requirements of Defense Federal Acquisition Regulation Supplement (DFARS) Procedures, Guidance and Information (PGI) 206.103-170(d). The Naval Air Warfare Center Aircraft Division (NAWCAD) Lakehurst, NJ, intends to solicit, negotiate, and make an award on a sole-source basis with DANIELS MANUFACTURING CORPORATION, CAGE Code (CAGE: 11851) for a Firm Fixed-Price contract. This procurement is to acquire Wire Connector Repair Sets, Part Number (P/N) DMC2106MOD1, NSN 5180-01-665-4456 in support of the United States Navy (USN) MQ-4C Unmanned Aircraft Systems (UAS) Program. THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is issued for information and planning purposes and is issued in conformance with DFARS PGI 206.103-170; it does not constitute an Invitation for Bid (IFB), a Request for Proposals (RFP), or a Request for Quotes (RFQ). This RFI does not commit the Government to award a contract for any supply or service whatsoever. The Government WILL NOT pay for any information received in response to this RFI, and the Government will not compensate the respondent for any cost incurred in developing the response to this RFI. Respondents are notified that a formal solicitation may be announced under a separate SAM announcement. Any requests for copies of solicitations will not be addressed since this is an RFI, not an IFB, RFP, or RFQ. Responses will be treated as information only, and not as proposals. Not responding to this RFI does not preclude participation in any future RFP. Any comments provided may or may not be included in a formal solicitation. The Government will not release any information marked with a proprietary legend received in response to this RFI to any firms, agencies or individuals outside the Government without written permission in accordance with the legend. Please be advised that all submissions become Government property and will not be returned. All interested parties should send company information and descriptive literature on currently available products that meet the Navy's requirements, as described above. With the response, include a point of contact, phone number, email address, website information, CAGE code, and Business Size Status for the North American Industrial Classification System (NAICS) code of this RFI. Any responses in reference to this RFI shall be submitted electronically to the Point of Contact associated with this RFI no later than the requested responses date.
-Market Research11/09/2026
Request for quote for Diamond Saw Products. Brand name justification attached.
-Combined Synopsis11/13/2026
-Solicitation11/30/2026

Additional Details

Solicitation Number

N6833526Q0392

Archive Date

Jul 7, 2026

Office Address

JOINT BASE MDL, NJ, 08733