Notice ID: 1532237a854a49b1b5e1d3bb8baa84a5Award NoticeAwardedArchived
RTAMS Audio/Visual CM/PM Services
Awarded on May 14, 2025. Full description on SAM.gov.
Awarded tounder M6739925D0003 (source: SAM.gov award notice)• $124.8K
Overview
- Posted
- May 16, 2025
- Notice type
- Award Notice
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 334310: Audio and Video Equipment Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- COMMANDING OFFICER
- Place of performance
- Twentynine Palms, CA, 92278
- Last updated
- Nov 13, 2026
- First published
- Last updated on SAM.gov
- Award date
- May 14, 2025
- Award amount (SAM.gov award notice)
- $124.8K
Identifiers
- Solicitation number
- M6739925Q0015
- Notice ID
- 1532237a854a49b1b5e1d3bb8baa84a5
- Award number (PIID)
- M6739925D0003
Description
For the convenience of the government, the solicitation has been extended until Tuesday May 06, 2025. Please see attached Amendment 0001 for Questions and answers. Site Visit is scheduled and highly recommended. On Site visit Thursday, April 24, 2025 at 1 pm PDT. For a site visit appointment, the point of contact is Mr. Brad Covert, Training Resource Officer , phone: 760-830-4777. Participants as instructed will meet at USMC/MCAGCC/MAGTFTC Twentynine Palms, CA, 92278. PERFORMANCE WORK STATEMENT (PWS) Range Training Area Maintenance Section (RTAMS) A/V CM/PM Svcs Scope This Performance Work Statement (PWS) describes repair services for the Range Training Area Maintenance Section (RTAMS) audio and visual (A/V) equipment in the identified rooms in Building 1707, Marine Corps Base, Twentynine Palms, CA. The objective is to maintain the current equipment in operational condition to the maximum extent possible, minimizing the need for equipment upgrades and ensuring continued functionality. The Contractor shall provide all labor, management, supervision, and non-furnished tools necessary to perform the repair of the items as identified in the attachment. Work Site Locations The work will be performed at the following location: Building 1707, Marine Corps Base, Twentynine Palms, CA Classrooms: 103 (Classroom A), 104 (Classroom B), 105 (Classroom C), 106 (Classroom D), 108 (Conference room), 111 (Training room). The four (4) primary classrooms share a standardized A/V configuration. The conference room and (RMTK) room contains standalone systems with unique configurations. A site visit is strongly recommended. Performance Requirements/Tasks The contractor shall perform the following tasks in accordance with the standards and expectations outlined in this PWS: 3.1: Preventative Maintenance (PM) Visits The contractor shall perform quarterly visits to all work site locations, ensuring focus on preventative maintenance, reliability and the prolonged functionality of the A/V systems. These visits shall include: Cleaning of all Audio/Visual equipment. Conducting comprehensive system functionality tests to proactively recognize potential issues. Inspecting and maintaining all UPS battery components for the Audio/Visual equipment. Implementing minor adjustments or firmware updates to optimize system performance. Provide a detailed PM report, to include findings and any necessary recommendations, shall be submitted within 10 working days of each visit. The installed equipment includes Planar display screens and TrippLite UPS systems. Internal A/V hardware components include devices manufactured by AMX and EXTRON. Specific models may vary and can be confirmed during onsite inspections. 3.2: Corrective Maintenance (CM) and Repairs The contractor shall diagnose, troubleshoot, and repair issues affecting the functionality of the Audio/Visual systems in the designated rooms. This includes addressing deficiencies identified during inspections, routine maintenance, or as reported by end users to ensure operational efficiency. The contractor shall take all necessary corrective actions to restore full system functionality and provide recommendations for sustaining long-term performance. All CM repairs shall be documented, and a detailed report shall be provided within 10 working days of completion. Equipment replacement should be brand name or equal and interoperable with the existing systems. 3.3: Over and Above Work Each CM task order will require the contractor to submit a quote (to the CO/COR) identifying the materials and repair parts needed for completion of CM tasks. Over and Above work material/supplies shall be determined to be fair and reasonable and negotiated if necessary prior to performance of the work (max 52 per YR). The government has the right to purchase required supplies and materials from another source due to the lack of price reasonableness from the contractor. Emergency Support Contractor must be prepared to provide at a minimum, two 24 48 hour emergency response service calls annually, as directed through the Contracting Officer Representative (COR) and the Technical Point of Contact (TPOC). The COR/TPOC will be presented at the time of award. Developing problems on equipment will be communicated via phone with a requested support window of three (3) business days. Standard requests will be scheduled via email coordination. Remote help desk support shall be included as a required component of services and must be available for issue resolution and coordination outside of scheduled on-site support. Contractor Quality Assurance The contractor shall establish and maintain an effective quality assurance system to ensure compliance with the performance requirements standards of this PWS. The system shall include: Regular internal inspections and audits. Documentation of inspection results and the corrective actions taken. Compliance with government-specified quality control procedures. Reporting procedures for non-conformance issues and resolution timelines. The government reserves the right to conduct performance evaluations and quality assurance inspections to ensure compliance with contractual requirements. The contractor shall also cooperate fully with government representatives COR/TPOC in the evaluation process. Warranty All new equipment furnished by the contractor shall be accompanied by a manufacturers standard warranty. The contractor shall be solely responsible for ensuring that warranty repairs are made. Hours of Work All work will be conducted during standard work hours, Monday through Friday, 0800 1700 Pacific Time. Alternate work hours may be pre-arranged with the Contracting Officer Representative (COR) or Technical Point of Contact (TPOC) provided at the time of award. Contractors shall reserve service calls in advance, to avoid conflicts with room scheduling or occupancy. While no special access to the rooms is required, scheduling should account for room availability. Contracting Officer Representative (COR) The designated COR shall be the technical point of contact for the Government. The COR shall be appointed in writing by the Contracting Officer of the Regional Contracting Office (RCO). Upon learning of any discrepancy during the service period, the COR will contact the contractor and coordinate a resolution. All logistical coordination and contact with the contractor shall be initiated by the designated COR. The COR shall coordinate with the contractor their base access to the installation. Only authorized representatives may render contractor services, unless the list is subsequently modified by mutual agreement between the contractor and the COR to add/delete or terminate authorized representatives. The COR shall review and certify the contractors Invoice in Wide Area Workflow (WAWF) to ensure that services cited have been performed; and are consistent and reasonable for the effort completed during the period covered by the Invoice. The COR shall monitor the contractors service progress, costs, and quality of performance; notify the contractor of deficiencies observed during surveillance and direct appropriate action to effect correction. The COR shall record and report to the Contracting Officer any incidents of faulty or nonconforming service, delays or problems. The COR is not authorized to make changes or provide monetary adjustments to the contract. The only authority that can make contractual changes is the Contracting Officer of the Regional Contracting Office at (760) 830-5118. The designated COR will be assigned upon award. All contractor technicians must be eligible for base access and have no background offenses that would bar them from entering a U.S. military installation. Base access will be facilitated through government sponsorship.
Award Overview
Award Number
M6739925D0003
Award Amount (SAM.gov award notice)
$124.8K
Award Date
May 14, 2025
Awardee
Awardee UEI
RY5JGX8KWHV5
Delivery Order Number
M6739925F0152
Original Solicitation
Notice ID: 1532237a854a49b1b5e1d3bb8baa84a5
Posted Date: May 16, 2025
Original Response Deadline: Not specified
Task Orders Under This IDV
Top 10 by total obligated
- $41.5KSigned Jun 4, 2026
- $39.6KSigned May 16, 2025
- $20.6KSigned May 26, 2026
- $6.7KSigned Sep 17, 2025
More From This Vendor
Top 5 most recent
- $41.5KSigned Jun 4, 2026
- $20.6KSigned May 26, 2026
- $138.4KSigned May 21, 2026
- $21.5KSigned Apr 28, 2026
- $29.6KSigned Apr 1, 2026
Contacts
Documents
Lifecycle
- 3Version 3SolicitationArchived
RTAMS Audio/Visual CM/PM Services
- 5Version 5Award NoticeArchivedCurrent
Type changed from Solicitation to Award Notice
RTAMS Audio/Visual CM/PM Services
Other notices for this solicitation
- SolicitationRelated noticeApr 16, 2025
RTAMS Audio/Visual CM/PM Services
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Additional Details
Solicitation Number
M6739925Q0015
Archive Date
May 29, 2025
Office Address
TWENTYNINE PALMS, CA, 92278-8108