GovChime
Notice ID: 76da2462d53042679383ee09dee94215Sources SoughtArchived

Custom Magneto-resistive Sensors

Archived on January 6, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM EST
Posted
December 8, 2025
Notice type
Sources Sought
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Notice details

Office
DEPT OF COMMERCE NIST
Place of performance
Gaithersburg, Maryland, 20899
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
NIST-SS26-CHIPS-35
Notice ID
76da2462d53042679383ee09dee94215

Description

NIST-SS26-CHIPS-35

PLEASE NOTE THIS A SOURCES SOUGHT NOTICE ONLY

Title: Custom Magneto-resistive Sensors

BACKGROUND

The NIST Sensor Science Division is responsible for advancing the measurement science, standards, and applications for sensing optical power, temperature, humidity, pressure, vacuum, flow, and related physical phenomena to support U.S. industry and trade.  Our laboratory performs measurements and calibrations using magnetic and infrared optical detectors, and we fabricate our own measurement systems around custom detectors optimized for use with these systems. The custom-designed magneto-resistive sensors to be purchased will be used as part of a scanning magnetic microscope we are developing for acquisition of 3D thermal images in semiconductor packages.

NIST requires fabrication of custom magneto-resistive sensors according to a design that meets our specifications. The contract will begin with initial design drawings from the manufacturer, and after review and modifications, the final design will be approved by both parties before fabrication begins. These sensors will be used for magnetic field detection in a scanning magnetic microscope we are developing for the CHIPS Metrology Project 03.12 (3D Thermal Imaging of Advanced Packages).

These are the minimum requirements are as follows:

Line Item 0001:

Custom Magneto-resistive Sensors Detailed Requirements

**The sensors delivered must be bare-die detectors, meeting the following specifications:

1) Frequency range

a) detectors must operate from DC to 100 kHz

b) 1/f knee must be at frequency of 1 kHz or below

2) Field sensitivity

a) £1 nT/(Hz)0.5 at 10 kHz

b) £1 nT/(Hz)0.5 at 1 kHz

c) £10 nT/(Hz)0.5 at 100 Hz

3) Operating conditions

a) The sensor must be able to operate in saturation fields up to 100 mT, where the saturating field can be DC or AC

b) Magnetometer, gradiometer, and Wheatstone bridge designs are all acceptable if they can meet all the specifications required

c) In-plane or perpendicular sensing are acceptable as long as all technical specifications are met

d) Operating temperature of at least 10 °C – 85 °C

4) Dimensions

a) Sensor size must be £ 2 mm x 2mm

b) It must be possible for the sensor to be placed within 1 mm of the surface of a device under test

5) Deliverable specifications

a) At least one wafer of sensors will be delivered (minimum 100 sensors), preferably diced into individual chips. In the bid, manufacturers have the option to quote the price for a second wafer, undiced.

b) Multiple designs can be fabricated on the wafer to test different geometries.  Single sensor designs are required, but linear arrays up to 50 devices are also possible

c) Sensors must be delivered according to the timeline in the Deliverables section, and the final wafer design must be approved by both parties before fabrication

d) Documentation of wafer sensor CAD, measured specifications, operation instructions must be provided.  Technical support must be offered for 1 year.

HOW TO RESPOND TO THIS NOTICE

In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response.  Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed at the bottom of this notice as soon as possible, and preferably before the closing date and time of this notice.

•           Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company’s Unique Entity ID (UEI).

•           Details about what your company is capable of providing that meets or exceeds NIST’s minimum requirements and its past experience with design and manufacture of magneto-resistive sensors. Any relevant past performance.

•           Identify any aspects of the description of the requirements in the BACKGROUND section above that could be viewed as unduly restrictive or create unnecessary barriers that adversely affect your firm’s ability to fully participate in a procurement for such services and explain why.  Please offer suggestions for how the requirements could be organized or structured to encourage the participation of small businesses.

•           For the NAICS code

o          Indicate whether your company is (a) a small business or (b) other than small business.  See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information.

o          If you believe the NAICS and/or Product Service Code code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS/PSC code that you believe would be more appropriate for the planned procurement.

•           If your firm has existing Federal Supply Schedule contract(s) or other contracts for products or services against which the Department may be able to place orders, identify the contract number(s) and other relevant information.

•           Describe your firm’s experience (as a prime, subcontractor, or consultant) providing the products or services described in Background section.

•           Provide any other information that you believe would be valuable for the Government to know as part of its market research for this requirement.

•           Please let us know if you would like to engage to get a better understanding of the requirement or need additional information about the Government’s requirement for the products or services described in the Background section.

QUESTIONS REGARDING THIS NOTICE

Questions regarding this notice may be submitted via email to the Primary Point of Contact listed in this notice. Questions should be submitted so that they are received by 5:00 p.m. Eastern Time on December 12, 2025.  Questions will be anonymized and answered via sources sought notice amendment following the question submission deadline.

IMPORTANT NOTES

The information received in response to this notice will be reviewed and considered so that the NIST may appropriately solicit for its requirements in the near future. 

This notice should not be construed as a commitment by the NIST to issue a solicitation or ultimately award a contract. 

This notice is not a request for a quotation. Responses will not be considered as proposals or quotations.

No award will be made as a result of this notice. 

NIST is not responsible for any costs incurred by the respondents to this notice.

NIST reserves the right to use information provided by respondents for any purpose deemed necessary and appropriate.

Thank you for taking the time to submit a response to this request.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

  1. 1
    Version 1Sources SoughtArchived

    Custom Magneto-resistive Sensors

    Notice 1d6e41667c2a4188bf0675c67c35ea7d on SAM.gov

  2. 3
    Version 3Sources SoughtArchivedCurrent

    Custom Magneto-resistive Sensors

    Notice 76da2462d53042679383ee09dee94215 on SAM.gov

  3. 8
    Version 8Combined Synopsis/SolicitationArchived

    Type changed from Sources Sought to Combined Synopsis/Solicitation

    Custom Magneto-resistive Sensors

    Notice 766ae56e1ae846d5b1cc13ab66f09340 on SAM.gov

  4. 9
    Version 9SolicitationArchived

    Type changed from Combined Synopsis/Solicitation to Solicitation

    Custom Magneto-resistive Sensors

    Notice 63696beb78e846cbaade56a75b8846d2 on SAM.gov

  5. 12
    Version 12SolicitationArchived

    Custom Magneto-resistive Sensors

    Notice fcf1074a91cf4a0a917040f50a49df47 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-Market Research11/20/2026
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.
-Market Research11/28/2026
-Market Research12/05/2026
-Market Research12/03/2026
Answers to Questions attached. Questions are due by 11:00 AM Monday, 16 November 2026. The proposal due date has not been extended.
-Solicitation11/23/2026

Additional Details

Solicitation Number

NIST-SS26-CHIPS-35

Archive Date

Jan 6, 2026

Office Address

GAITHERSBURG, MD, 20899