Library of Congress - Wayfinding Fabrication
Awarded on September 3, 2026. Full description on SAM.gov.
Overview
- Posted
- September 3, 2026
- Notice type
- Award Notice
- NAICS
- 339950: Sign Manufacturing
- Agency
- Library of Congress
Notice details
- Office
- CONTRACTS SERVICES
- Place of performance
- Washington, District of Columbia, 20540
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
- Award date
- Sep 3, 2026
- Award amount (SAM.gov award notice)
- $2.5M
Identifiers
- Solicitation number
- 030ADV26R0030
- Notice ID
- 4066b80235d945cf99ccc299cb895dc2
- Award number (PIID)
- LCCEI26C0003
Description
The Library of Congress Exhibits Office (EO) seeks a highly experienced sign fabricator to provide services needed to prepare, fabricate, deliver, and install wayfinding signage throughout the Thomas Jefferson building. The contractor shall provide Wayfinding signage fabrication services for the Library of Congress.
***Amendment 0001***
The purpose of this amendment is as follows:
1. To extend the proposal due date from 5/27/2026 to 6/5/2026.
2. Revise the SOW at Section C based on answers provided from questions received.
3. Attach the Q&A at section J.
4. Attach W-504 and W-505 revisions at section J.
All other terms and conditions remain the same.
***Amendment 0002***
The purpose of this amendment is to clarify that the proposal due date is 6/5/2026.
***Amendment 0003***
The purpose of this amendment is to extend the proposal due date to 6/10/2026.
Award Overview
Award Number
LCCEI26C0003
Award Amount (SAM.gov award notice)
$2.5M
Award Date
Sep 3, 2026
Awardee
Awardee UEI
P9M1N7DNLDB5
Awardee CAGE Code
1RZ03
Awardee Address
Manassas, VA 20109, UNITED STATES
Original Solicitation
Notice ID: 4066b80235d945cf99ccc299cb895dc2
Posted Date: Sep 3, 2026
Original Response Deadline: Not specified
Contract Details
Contract data not yet available
Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (14)
- Download
Amendment 030ADV26R0030 0003.pdf
119 KBAdded in Solicitation version 6Posted - Download
Amendment 030ADV26R0030 0002.pdf
119 KBAdded in Solicitation version 4Posted - Download
Attachment J-8 - W-504 and W-505 Addendum 01 260520.pdf
1.7 MBAdded in Solicitation version 3Posted - Download
Attachment J-9 - Wayfinding QA 05222026.pdf
83 KBAdded in Solicitation version 3Posted - Download
J-3 - Wayfinding SOW - REV 052226.pdf
503 KBAdded in Solicitation version 3Posted - Download
Amendment 030ADV26R0030 0001.pdf
182 KBAdded in Solicitation version 3Posted - Download
J-7 - Wage Determinations.pdf
73 KBAdded in Solicitation version 1Posted - Download
J-6 - Past Performance Questionnaire.docx
44 KBAdded in Solicitation version 1Posted - Download
J-5 - AOC Design Standards - December 2018.pdf
3.8 MBAdded in Solicitation version 1Posted - Download
J-4 - Price Schedule.xlsx
17 KBAdded in Solicitation version 1Posted - Download
J-3 - Wayfinding SOW - 040926.pdf
499 KBAdded in Solicitation version 1Posted - Download
J-1 - LOC Wayfinding Design Intent for Fabrication Tender 251211.pdf
159 MBAdded in Solicitation version 1Posted - Download
J-2 - LOC Sampling _ Prototyping Requirements v.02.pdf
990 KBAdded in Solicitation version 1Posted - Download
Solicitation 030ADV26R0030 - 04282026.pdf
493 KBAdded in Solicitation version 1Posted
Lifecycle
- 2Version 2SolicitationArchived
Library of Congress - Wayfinding Fabrication
- 5Version 5Award NoticeArchivedCurrent
Type changed from Solicitation to Award Notice
Library of Congress - Wayfinding Fabrication
Other notices for this solicitation
- SolicitationRelated noticeApr 28, 2026
Library of Congress - Wayfinding Fabrication
- SolicitationRelated noticeApr 28, 2026
Library of Congress - Wayfinding Fabrication
- SolicitationRelated noticeMay 22, 2026
Library of Congress - Wayfinding Fabrication
- SolicitationRelated noticeMay 26, 2026
Library of Congress - Wayfinding Fabrication
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Delivery and Installation of Wayfinding and Emergency Signage U.S. Embassy Vienna 1. The Contractor shall provide all labor, supervision, design-development coordination, materials, equipment, transport, tools, access equipment, fasteners, and incidentals necessary to produce and install a complete wayfinding and emergency signage system at the U.S. Embassy Vienna compound. The finished work shall include delivery and installation and must follow the Government-furnished sign schedule, location plans, evacuation plans, and the applicable OBO signage design intent for sign types SF02 and SR02. 2. Required Signs and Quantities Category / IDs; Type; Nominal size (W x H); Qty.; Key requirement Exterior: SF02; 450 x 450 mm; 3 units; Six long and six short interchangeable sections per sign. Exterior spare inserts: SF02 - To match exterior signs; 12 units; Blank interchangeable sections. Interior directional: SF02; 400 x 350 mm; 15 units; Six long and six short interchangeable sections per sign. Building directory: SF02; 400 x 1200 mm; 1 unit; Twenty-six long and twenty-six short interchangeable sections. Evacuation plans: SR02; 400 x 350 mm; 10 units; Fixed graphic panels; reproduce the Government-furnished evacuation plan content for each location. Emergency alarm tones: SR02; 230 x 400 mm; 10 units; Fixed graphic panels; two signs on each of Levels 0-4. Interior spare inserts; SF02 - To match interior signs; 24 units; Twelve blank long inserts and twelve short arrow inserts. 3. Technical and Graphic Requirements Use the Government-furnished sign IDs, destinations, floor designations, arrows, building-directory entries, evacuation graphics, legends, emergency symbols, and alarm-tone content. The Contractor shall verify each message and orientation against the location plans before fabrication. SF02 wall-mounted directional signs shall follow the OBO SF02 design intent, including interchangeable message sections, directional symbols, cropped seal where shown, Calibre typography, and translation only where required for areas accessible to the general public. SR02 alert signs shall follow the OBO SR02 design intent: painted acrylic border and face panels, direct-printed text/graphics, concealed mechanical fastening, and the applicable regulatory, warning, or explanatory border treatment. Signs shall be durable, cleanable, non-glare, colorfast, and suitable for the intended interior or exterior location. Exterior assemblies and fixings shall be weather resistant and corrosion resistant. All work and deliverables as per attached Scope of Work and supporting documents. | - | Solicitation | 12/03/2026 |
THIS ANNOUNCEMENT IS NOT A NOTICE OF SOLICITATION ISSUANCE. THIS IS A REQUEST FOR INFORMATION (RFI) FOR PLANNING PURPOSES ONLY. This RFI is issued for developing a viable solicitation that will best communicate the Government's requirements to industry. Response to this RFI is strictly voluntary and will not affect any firm's ability to submit an offer if, or when, a solicitation is released. The requested information is for planning purposes only and does NOT constitute a commitment, implied or otherwise, that a procurement action will be issued. No entitlement to payment by the Government of direct or indirect costs or charges will arise as a result of the submission of information in response to this RFI. The Government shall not be liable for or suffer any consequential damages for any improperly identified proprietary information. Proprietary information will be safeguarded in accordance with the applicable Government regulations; formal notices will be on the SAM website. **GENERAL INFORMATION** The Office of Faciities Acquition Liaison is in the process of determining the acquisition strategy for Wall Display and Installation. The Government anticipates awarding a SINGLE AWARD, under PSC code: 9905 and NAICS Code 339950. The Government is considering a FIRM FIXED PRICE procurement. Display and Schedule Requirements Wall dimensions: 250 inches wide × 98 inches high. Acrylic frames: 11 inches wide × 8.5 inches high, landscape orientation. Mounting system: Acrylic frames suspended from a wall-mounted frame using an aluminum cable system. Display lighting: Include lighting to evenly illuminate the warrants while minimizing glare on the acrylic frames. Please recommend lighting type, fixture placement, and controls. Delivery: Within 30 days after receipt of award. Installation: A 30-day timeframe. Please identify the anticipated on-site installation duration and confirm whether the installation timeframe would begin upon delivery or site readiness. The received information will be consolidated, and all inquiries will be routed to the appropriate person(s) for review and consideration. Please note, that any questions/comments received from industry will NOT be posted on the public website. | - | Market Research | 11/02/2026 |
The DCNG requires the manufacturer and installation of retroreflective vehicle decals on forty-six (46) Government vehicles. Review the attached solicitation (SF 1449) and Performance Work Statement. Take note of the evaluation criteria listed in clause FAR 52.212-2 of the Solicitation. | - | Solicitation | 11/13/2026 |
The D.C. Army National Guard (DCNG) has issued this sources sought as a means of conducting market research to identify potential vendors, including Small Business vendors, relative to NAICS 339950. Disclaimer: This sources sought notice is for informational purposes only. This is not a request for proposal (RFP), invitation for bid (IFB), or request for quote (RFQ). It does not constitute a solicitation and shall not be construed as a commitment by the Government. Responses in any form are not offers and the Government is under no obligation to award a contract as a result of this announcement. No funds shall be paid for preparation of responses to this announcement. Any information submitted by respondents to this notice is voluntary. Responses will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFP, IFB, or RFQ. If a solicitation is released, it will be synopsized on the government-wide point of entry (GPE). It is the responsibility of potential offerors to monitor the GPE for additional information pertaining to this requirement. Background: The DCNG requires the manufacturer and installation of reflective vehicle decals on approximately sixty (60) Government vehicles. The contractor shall provide all labor, materials, equipment, fabrication, and installation services necessary to complete the identification markings in accordance with Government-provided design. Required Capabilities: Decals: The vehicle decals shall be made of white, automotive-grade retroreflective vinyl suitable for exterior vehicle applications. All decals shall match the Government-provided mockups, including lettering, stars, stripes, proportions, orientation, and placement. Each vehicle shall display a unique identification number, DC-01 through DC-60. Decals shall be manufactured to cover at least 60% of the roof, sides, front, and rear areas. Decals shall be customized for each vehicle make and model while maintaining the approved design proportions. Schedule: The Government's preferred installation pace is a minimum of five (5) completed vehicles every seven (7) calendar days. Location: The Government’s preferred location of installation is on the Government Installation, Joint Base Anacostia-Bowling, in Washington, D.C. Vendor Submission Details: Interested parties are requested to submit an Interested Vendor Form and a narrative statement of no more than one page length to Amanda Britton, Amanda.L.Britton4.mil@army.mil. | - | Market Research | 11/10/2026 |
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 1284LM27Q0008 is issued as a Request for Quotation (RFQ) for boundary/survey markers with applied Forest Service specific decals. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 339950. The small business size standard is 500 employees. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency. For specifications and submittal instructions, please see the attached documents. Questions should be sent to joanne.meiers@usda.gov no later than 11/16/2026, 1700 MT. | - | Combined Synopsis | 11/24/2026 |
Additional Details
Solicitation Number
030ADV26R0030
Archive Date
Sep 13, 2026
Office Address
Washington, DC, 20540