GovChime
Notice ID: bcb3f2ba20b24683ba471b86c8dd3a8fSources SoughtArchived

Sources Sought Notice - Common Robotic System - Heavy and Man Transportable Robotic System Inc. II Post Production Software Sustainment Services

Archived on December 11, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM EST
Posted
November 19, 2025
Notice type
Sources Sought
NAICS
334511: Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC WRN.W6QK ACC- DTA
Place of performance
Franklin, Massachusetts, 02038
Last updated
Nov 6, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W56HZV-24-R-0156
Notice ID
bcb3f2ba20b24683ba471b86c8dd3a8f

Description

SOURCES SOUGHT NOTICE

I. Description of Intent

This notice is to gauge the availability of vendors that are capable and interested in meeting the Government’s sustainment requirements for the Common Robotic System – Heavy (CRS-H) and the Man Transportable Robotic System Increment II (MTRS Inc. II). The Product Manager for Robotic and Autonomous Systems (PdM RAS) overall requirement for the CRS-H and MTRS Inc. II includes all software and hardware to fulfill Life Cycle Sustainment Support.  This notice is also being used to gauge the availability of vendors that can provide software (SW) and hardware (HW) development to address obsolescence of which Teledyne FLIR Unmanned Ground Systems, Inc. is the Original Equipment Manufacturer (OEM).

II. General Information:

a. Requirement Overview

PdM RAS is issuing a Sources Sought Notice as a means of conducting market research only to identify parties having an interest and the resources to support this requirement.  The information gained will be used for preliminary planning and to determine the availability of qualified contractors to provide CRS-H/MTRS Inc. II sustainment support. The information received will be used by the Government to facilitate the decision-making process and, if a solicitation is issued subsequent to this notice, information received from respondents will aid in the decision of whether to issue a solicitation as a competitive set-aside for qualified Small Businesses, Vendors with General Services Administration (GSA) Schedules, or whether to issue a solicitation as an unrestricted full and open competition.  The Government assumes no financial responsibility for cost incurred with providing information in response to this announcement or any follow-up information requests.  This notice does not constitute a Request for Proposal (RFP) and is not to be construed as a commitment by the Government for any purpose other than market research.  Respondents will not be notified of the results regarding the sources sought.

Any subsequent contract would be Firm-Fixed Price (FFP) with a period of performance of five years from the date of award. 

b. Proprietary Information

The U.S. Government appreciates the time and effort taken to respond to this survey. The U.S. Government acknowledges its obligations under 18 U.S.C. §1905 to protect information qualifying as “confidential” under this statute. [To avoid possible confusion with the meaning of the term “confidential” in the context of Classified Information,” we will use the term “PROPRIETARY.”] Pursuant to this statute, the U.S. Government is willing to accept any trade secret or PROPRIETARY restrictions placed on qualifying data forwarded in response to the survey questions and to protect it from unauthorized disclosure subject to the following:

1.       Clearly and conspicuously mark qualifying data with the restrictive legend (all caps) “PROPRIETARY” with any explanatory text, so that the U.S. Government is clearly notified of what data needs to be appropriately protected.

2.       In marking such data, please take care to mark only those portions of the data or materials that are truly confidential (over breadth in marking inappropriate data as “PROPRIETARY” may diminish or eliminate the usefulness of your response - see item 6 below). Use circling, underscoring, highlighting or any other appropriate means to indicate those portions of a single page which are to be protected.

3.       The U.S. Government is not obligated to protect unmarked data. Additionally, marked data that is already in the public domain or in the possession of the U.S. Government or third parties, or is afterward placed into the public domain by the owner or another party through no fault of the U.S. Government will not be protected once in the public domain. Data already in the possession of the U.S. Government will be protected in accordance with the U.S. Government's rights in the data.

4.       Confidential data transmitted electronically, whether by physical media or not, whether by the respondent or by the U.S. Government, shall contain the “PROPRIETARY” legend, with any explanatory text, on both the cover of the transmittal e-mail and at the beginning of the file itself. Where appropriate for only portions of an electronic file, use the restrictive legends ‘PROPRIETARY PORTION BEGINS:” and “PROPRIETARY PORTION ENDS.”

5.       In any reproductions of technical data or any portions thereof subject to asserted restrictions, the U.S. Government shall also reproduce the asserted restriction legend and any explanatory text.

6.       The U.S. Government sometimes uses support contractors in evaluating responses. Consequently, responses that contain confidential information may receive only limited or no consideration since the Respondent’s marking of data as “PROPRIETARY” will preclude disclosure of same outside the U.S. Government and therefore will preclude disclosure to these support contractors assisting the evaluation effort. The U.S. Government will use its best efforts to evaluate those responses that contain confidential information without using support contractors consistent with the resources available.

Submission Instructions:

All responding to this notice shall provide specific information to include a summary of its company’s capabilities.

Information to be provided shall include a Capability Statement which demonstrates the skills, experience, knowledge, and capabilities necessary to perform the Government’s requirement to provide:

  1. Development of SW and HW to support obsolesces and latent defects. 

          Software:

  • Develop a software release and deliver to the Government for distribution to fielded systems.
  • This includes:
  • Security updates to maintain an Authority to Operate (ATO).
  • Software bugs or latent defects discovered in fielded systems.

          Hardware:

  • Develop hardware solutions and deliver prototype solutions to the Government.
  • This includes:
  • Addressing obsolete parts.
  • Latent defects discovered in fielded systems.

      2. Support of Government tests to validate SW and HW changes. 

  • This includes Field Service Representative(s) support at Government test sites.
  • Providing any contractor test data.

      3. Descriptions of procedure changes and work package callouts and/or images to Army Technical Manuals as a result of SW and HW updates.

      4. Conduct Depot Level hardware updates to fielded systems if internal hardware components become obsolete.

The Capability Statement should include:

  1. Contact information Including: Company Name:

Address:

Point of Contact: Phone Number: Email Address: DUNS/Cage Code: Website Address: Type of Organization:

Business Type(s): [ ] Large Business (LB), [ ] Small Business (SB), [ ] HUBZone (HZ), [ ] Service Disabled Veteran Owned Small Business (SDVOSB), [ ] Woman Owned Small Business (WOSB), [ ] 8(a) Business Development Program, [ ] Small Disadvantaged Business (SDB), [ ] Veteran Owned Small Business (VOSB).

        2.  A statement indicating if your company possesses the capability to provide the entire range of parts and services for the robot called for in this requirement. Does your company have the ability to provide any, some, or all of the parts identified in this requirement? Does your company have the ability to provide depot level repair and maintenance services? Provide a table to list each part/service you are experienced with and capable of providing.

       3. Does your company have experience as a prime contractor providing the system, parts and services of the same or similar type effort(s) (to include size and complexity) within the past five years? If yes, please provide the following information:

Contract number(s):

Dollar value(s):

Point of Contact (POC):

POC Email address:

POC Phone number:

Brief description of your direct support of the effort: Similarity of scope, effort, complexity:

     4. Potential sources should only submit the minimum information necessary and shall not exceed ten pages.  Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding its submissions.  The Government may contact potential sources for additional information as required.

      5. Interested parties are encouraged to be registered in the System for Award Management, www.sam.gov prior to responding to this Sources Sought Notice.

      6. Interested parties that consider themselves qualified to perform the above listed requirements are invited to submit a response to this Sources Sought no later than 1700 EST 26 NOV 2025.

      7. Responses to this Sources Sought Notice shall be submitted via email to Zenon Chovich at zenon.a.chovich.civ@army.mil.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

  1. 3
    Version 3PresolicitationArchived

    Synopsis - Common Robotic System - Heavy and Man Transportable Robotic System Inc. II Post Production Software Sustainment Services

    Notice 603c6d1914b94a56b46d06b4ec0cc1e2 on SAM.gov

  2. 4
    Version 4Sources SoughtArchived

    Type changed from Presolicitation to Sources Sought

    Synopsis - Common Robotic System - Heavy and Man Transportable Robotic System Inc. II Post Production Software Sustainment Services

    Notice 2c669db38e1c48caaf0bbd0e8ee0cb70 on SAM.gov

  3. 6
    Version 6Sources SoughtArchivedCurrent

    Sources Sought Notice - Common Robotic System - Heavy and Man Transportable Robotic System Inc. II Post Production Software Sustainment Services

    Notice bcb3f2ba20b24683ba471b86c8dd3a8f on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This statement provides notice that the government anticipates awarding a contract for engineering services for sustainment of the AAQ-13 Navigation Pod, sub-assemblies, and Line Replaceable Units (LRU's). Sustainment consists of the evaluation and resolution of system maintenance deficiencies, resolution of parts obsolescence deficiencies, integration between F-15E and the LANTIRN Nav pod, performance of sustainment studies and technical services in support of the analysis, review of Government engineering change proposals, reliability and maintainability (R&M), and Information Assurance (IA) support. The proposed contract action is for services for which the government intends to negotiate and award a five-year sole source contract to Lockheed Martin Corporation (CAGE: 04939), 5600 West Sand Lake Road, Orlando, FL 32819. This is in accordance with Federal Acquisition Regulation (FAR) 6.302-1. All responsible sources may submit a capability statement of proposal, which shall be reviewed by the U.S. Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. In accordance with Air Force Instruction (AFI) 16.201, foreign participation is not permitted at the prime contractor level. All potential offerors should contact the Contracting Specialist/Procuring Contracting Officer identified above for additional information, questions, and/or concerns. The period of performance will last for a total of one (1) 12-month basic period and (4) 12-month ordering periods. The place of performance will be at Robins Air Force Base, GA or the subcontractors' facilities.
57%
Solicitation04/02/2021
The Contractor shall furnish all labor, materials, and services to provide the U.S. Army Corps of Engineers, Wilmington District, Multi-Purpose Vessel (MPV) Brandy Station and the Dredge Murden with On-Site Support and Vessel Positioning Solutions.
52%
Solicitation09/15/2026
SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for 50 VASI Pressure Transducers. NASA/NSSC intends to issue a sole source contract to G P 50 NEW YORK, LTD. 2770 Long RD Grand Island, New York 14072-1223 United States under the authority of FAR 12.102(a). It has been determined that G P 50 NEW YORK, LTD. is the sole provider of VASI Pressure Transducers. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Goddard Space Flight Center (GSFC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 334519. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 11/16/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . Primary Point of Contact: Laura Quave Procurement Specialist II laura.a.quave@nasa.gov
51%
Special Notice11/16/2026
SYNOPSIS: This Sources Sought Announcement is to assist the US Army DEVCOM Soldier Center to identify potential sources to provide expert engineering support to trouble shoot process control system providing steam water and air. Must have expertise in process control plumbing and control valves for steam systems. Must have expertise in Allen Bradley PLC programming. The Government requests that responses be submitted electronically to mary.k.prebensen.civ@army.mil and Wesley.s.shaw.civ@army.mil by November 26th, 2026 by 5pm EST. Background: The Government (DEVCOM Soldier Center) is in need of expert engineering support to diagnose current PLC and piping system which support multiple hydraulic press systems. The existing system controls water, steam and air to molding tooling, and the PLC operates on custom Allen-Bradley control software. As it stands, the system is physically installed, however does not provide necessary temperature control in either manual or automatic modes. Issues may be traced to the original system design, pipe rack installation, PLC programming or some combination of the three. Description: Expert engineering services are sought to diagnose newly installed PLC control system to ensure that it can meet system design requirements, can be operated safely and reliably, and is adaptable for future operation and changing requirements. A new PLC system has been designed and installed per a list of system requirements, however is not able to control temperature per design requirements either due to control logic, poor valve selection or related piping design/installation. SC requires a 3rd party engineering service to validate as-built drawings against the installed system, verify/update PLC programming, provide necessary hardware changes to bring the system up to full operability. Specific System Specifications: Electric steam boiler provides 125psi dry steam as primary heat source for molding tooling. Standalone chiller provides chilled water at ~60 psi, and house air provides air for purge and mist functions. The Allen-Bradley PLC system controls the various media through a series of modulating valves to heat or cool the tooling. The PLC is intended to have recipe writing and management for automated control. Basic recipe for our process includes steam heat via pressure control to desired temperature setpoint, hold for ~1 hr while controlling temperature. The tooling is then cooled with chilled water at a controlled cooling rate. Our standard tooling includes an upper and lower platen, and the PLC has capability to control these independently. Additional system requirements will be included if there is a future RFP. Current known system issues: System will not maintain equivalent temperature for upper and lower platens during heat up or hold. System will not control cooling rate based on system feedback loop. System trend screen not displaying data correctly. System alarms remain untested. Mist function does not function without vibration of piping rack. Unique Vendor qualifications: Potential vendor must be US based and employ US citizens identified to work on the PLC system due to sensitivity of materials and products produced by the installation laboratory. Potential vendor must be licensed in process system design with specific expertise in steam controls. Potential vendor must be able to read modify and update Allen Bradly system code. Deliverables: Full system walkdown and comparison to As-built drawings. Analysis of system design, layout, valve selection, PLC operability as compared to provided list of system requirements. List of proposed design changes to meet system requirements and cost of implementation. Install required hardware and make required changes to system software. May subcontract for implementation of hardware changes. Provide updated As-built drawings for plumbing systems, electrical systems, PLC controls systems. System demonstration and verification to the As-built drawings provided Modified code in digital and hardcopy. Verified system manual. Full system demonstration and minimum 1 day training on system operation. Delivery Date: Government estimates work will be completed within 6 months of date of contract award. Government Furnished Property (Equipment/Materials/Information/Computer Utilization): All work to be performed on site at SC with access to existing PLC and piping rack. Interested parties are invited to submit a response to this Sources Sought Announcement. THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Army has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned. Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized in the SAM.gov website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject. RESPONSES: Interested parties may identify their interest and capability by sending responses regarding this requirement to DEVCOM Soldier Center via e-mail to mary.k.prebensen.civ@army.mil and Wesley.s.shaw@army.mil no later than November 26th, 2026 by 5:00 p.m. EST. The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party. Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. If you hold a GSA Federal Supply Schedule contract, please identify your contract number. QUESTIONS: Any questions for clarification may be emailed to mary.k.prebensen.civ@army.mil and Wesley.s.shaw@army.mil no later than November 20th, 2026 by 5:00 p.m. EST. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement.
45%
Market Research11/26/2026
High-Precision GNSS Survey System
45%
Combined Synopsis09/10/2026

Additional Details

Solicitation Number

W56HZV-24-R-0156

Archive Date

Dec 11, 2025

Office Address

WARREN, MI, 48397-5000