GovChime
Notice ID: 69362607098c4e5dbc6b91ae7872ac9eSources SoughtArchived

Foster Spillway Gate Nut Replacement and Re-Tensioning

Archived on September 16, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM PDT
Posted
August 24, 2026
Notice type
Sources Sought
NAICS
237990: Other Heavy and Civil Engineering Construction
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION NORTHWESTERN.ENDIST PORTLAND.W071 ENDIST PORTLAND
Place of performance
1648, Oregon
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
PANNWD-26-P-0000033137
Notice ID
69362607098c4e5dbc6b91ae7872ac9e

Description

Replace quantity 192 custom made[S(1]  castle nuts approximately two inch outside diameter by two inch long made from A564 UNS 17400 Type 630 Condition H1100 material (more commonly known as 17-4). Replace quantity 48 custom made U-bolts from 1-1/8-inch diameter rod bent to eighteen inches long with a six-inch radius made from A564 UNS 17400 Type 630 Condition H1100 material. Replace quantity eight custom U-bolt spacers approximately six inch outside diameter by twelve inch long made from self-lubricated composite material. Replace quantity eight gate connection pins approximately four-inch diameter by sixteen inch long made from A564 UNS 17400 Type 630 Condition H1100 material. Supply quantity one custom made installation tool approximately two inch outside diameter by ten inches long made from A564 UNS 17400 Type 630 Condition H1100 material for the custom castle nuts. 

After replacement of the gate connection components, the wire ropes of each gate will be tensioned to equal amounts from one side of the gate to the other so that the gate does not rub side walls under vertical travel and the gate contacts the spillway ogee evenly from one side to the other. The contractor will be responsible for the release and re-tensioning of wire ropes in the preparation and finishing of work activities.

Anticipated Construction Schedule: USACE Portland District intends to advertise in November 2026 and award in December 2026. The contractor will use its discretion to select the appropriate work period given the restrictions relayed and present a proposed work schedule to USACE for approval.

Estimated Construction Cost (ECC): The current ECC is between $1,000,000 and $5,000,000.

Number and Type of Contracts: NWP contemplates awarding one (1), Firm Fixed-Price contract. The acquisition strategy decision has not yet been determined. Maximum Small business participation is being sought at both the Prime and subcontracting levels.

Anticipated Source Selection Process: The expected method to determine the best value to the government is Invitation for Bid.

Cybersecurity Maturity Model Certification (CMMC) level: The CMMC level anticipated for this requirement is CMMC Level 2 (Self). This CMMC level, or higher (see 32 CFR part 170), will be required prior to award and maintained for the duration of the contract for each contractor information system that will process, store, or transmit Federal contract information (FCI) or controlled unclassified information (CUI) during performance of the contract.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (1)

  • Sources Sought - Foster Spillway Gate Nut Replacement and Re-Tensioning Revised 24Aug2026.pdf

    624 KBAdded in Sources Sought version 3Posted
    Download

Lifecycle

  1. 1
    Version 1Sources SoughtArchived

    Foster Spillway Gate Nut Replacement and Re-Tensioning

    Notice 2f95c5ad40ac4e53a55377a5d4fd072e on SAM.gov

  2. 3
    Version 3Sources SoughtArchivedCurrent

    Foster Spillway Gate Nut Replacement and Re-Tensioning

    Notice 69362607098c4e5dbc6b91ae7872ac9e on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
PIEE Solicitation Module Link for W9127N27BA005 at the bottom of this notice for the attachment.
97%
Pre-Solicitation11/05/2026
THIS IS A TOTAL SMALL BUSINESS SETASIDE. THIS PROJECT IS A STAND-ALONE ?C? TYPE, REQUEST FOR PROPOSAL (RFP), BEST VALUE SOURCE SELECTION SOLICITATION. Construction Order of Magnitude: Between $10,000,000 - $25,000,000 This project requires the Contractor to provide all labor, materials and equipment necessary to prep, prime and paint all metal components of the spillway gates, hoists and associated equipment. Painting includes blasting and painting of each structure, minor structural girder modifications, installing/replacing rubber seals and cathodic protection anodes on each gate, and performing weld repairs in accordance with the specifications. In addition, the contractor will be required to remove and replace the ?new? set of stoplogs seal assemblies prior to the gate painting effort. Finally, the contractor shall light clean and provide a maintenance overcoat paint on both sets of stoplogs ?new? and ?old?. The North American Industry Classification System (NAICS) code for this project is 237990, Other Heavy and Civil Engineering Construction. Note No. 1: All prospective contractors, including subcontractors and suppliers, must be registered in the Procurement Integrated Enterprise Environment (PIEE) at https://piee.eb.mil before they will be permitted to download solicitation documents. Contractors must also be registered in the System for Award Management (SAM) at https://sam.gov prior to award of this contract. Solicitation documents, including plans and specifications, will be available only via the PIEE website. No CD-ROMs, paper copies, telephonic, mailed, or fax requests will be accepted. Registration in PIEE should be completed at least one (1) week prior to the anticipated issue date of the solicitation. IMPORTANT: If you are not registered, the U.S. Government is not responsible for notifying you of any changes or amendments to this solicitation. It is the contractor?s responsibility to monitor the PIEE website daily for updates. Plans and specifications will not be provided in printed format. However, the Government reserves the right to issue paper copies if deemed in its best interest. The solicitation will be provided in PDF format and requires Adobe Acrobat Reader, which is available for free at http://www.adobe.com/products/reader. Note No. 2: All bid forms, bid bonds, and other standard documents required for bid submission, including any amendments, must be in electronic format and submitted with the proposal. Note No. 3: Critical path method (network analysis system) is required. Note No. 4: For this job, a small business is defined as having average annual receipts of less than $45,000,000 for the past three or five years. Note No. 5: This solicitation includes bid options which may not be awarded. Note No. 6: Address questions concerning downloading of plans/specifications to the Contract Specialist indicated above. Note No. 7: Site Visit information will be posted with the solicitation. Note No. 8: The Request for Information (RFI) process for bidder inquiries during the advertisement period will be conducted exclusively through the ProjNet internet-based system. Detailed instructions will be provided in the RFP solicitation package, which is available solely through the Procurement Integrated Enterprise Environment (PIEE) website: https://piee.eb.mil. RFIs submitted through other means will not be accepted. The Government will make every effort to respond to all inquiries; however, responses may not be provided for all questions, particularly those submitted within 10 days of the bid opening.
86%
Combined Synopsis04/23/2026
THIS IS A TOTAL SMALL BUSINESS SETASIDE. THIS PROJECT IS A STAND-ALONE ?C? TYPE, REQUEST FOR PROPOSAL (RFP), BEST VALUE SOURCE SELECTION SOLICITATION. Construction Order of Magnitude: Between $10,000,000 - $25,000,000 This project requires the Contractor to provide all labor, materials and equipment necessary to prep, prime and paint all metal components of the spillway gates, hoists and associated equipment. Painting includes blasting and painting of each structure, minor structural girder modifications, installing/replacing rubber seals and cathodic protection anodes on each gate, and performing weld repairs in accordance with the specifications. In addition, the contractor will be required to remove and replace the ?new? set of stoplogs seal assemblies prior to the gate painting effort. Finally, the contractor shall light clean and provide a maintenance overcoat paint on both sets of stoplogs ?new? and ?old?. The North American Industry Classification System (NAICS) code for this project is 237990, Other Heavy and Civil Engineering Construction. Note No. 1: All prospective contractors, including subcontractors and suppliers, must be registered in the Procurement Integrated Enterprise Environment (PIEE) at https://piee.eb.mil before they will be permitted to download solicitation documents. Contractors must also be registered in the System for Award Management (SAM) at https://sam.gov prior to award of this contract. Solicitation documents, including plans and specifications, will be available only via the PIEE website. No CD-ROMs, paper copies, telephonic, mailed, or fax requests will be accepted. Registration in PIEE should be completed at least one (1) week prior to the anticipated issue date of the solicitation. IMPORTANT: If you are not registered, the U.S. Government is not responsible for notifying you of any changes or amendments to this solicitation. It is the contractor?s responsibility to monitor the PIEE website daily for updates. Plans and specifications will not be provided in printed format. However, the Government reserves the right to issue paper copies if deemed in its best interest. The solicitation will be provided in PDF format and requires Adobe Acrobat Reader, which is available for free at http://www.adobe.com/products/reader. Note No. 2: All bid forms, bid bonds, and other standard documents required for bid submission, including any amendments, must be in electronic format and submitted with the proposal. Note No. 3: Critical path method (network analysis system) is required. Note No. 4: For this job, a small business is defined as having average annual receipts of less than $45,000,000 for the past three or five years. Note No. 5: This solicitation includes bid options which may not be awarded. Note No. 6: Address questions concerning downloading of plans/specifications to the Contract Specialist indicated above. Note No. 7: Site Visit information will be posted with the solicitation. Note No. 8: The Request for Information (RFI) process for bidder inquiries during the advertisement period will be conducted exclusively through the ProjNet internet-based system. Detailed instructions will be provided in the RFP solicitation package, which is available solely through the Procurement Integrated Enterprise Environment (PIEE) website: https://piee.eb.mil. RFIs submitted through other means will not be accepted. The Government will make every effort to respond to all inquiries; however, responses may not be provided for all questions, particularly those submitted within 10 days of the bid opening.
86%
Pre-SolicitationOpen
Contract Award for Webbers Falls Tainter Gate Replacement and Repair.
82%
AwardedOpen
PROJECT TITLE: JOHN DAY UNIT 10 PACKING BOX REPLACEMENT PROJECT LOCATION: JOHN DAY DAM, SHERMAN COUNTY, OREGON THIS IS A FULL AND OPEN PROCUREMENT. IN ACCORDANCE WITH RFO 19.110, THIS PROJECT REQUIRES THE HUBZONE 10% PRICE EVALUATION. THE JOHN DAY DAM ON THE COLUMBIA RIVER BETWEEN SHERMAN COUNTY, OREGON, AND KLICKITAT COUNTY, WASHINGTON. THE ESTIMATED MAGNITUDE OF CONSTRUCTION IS BETWEEN $500,000.00 AND $1,000,000.00. THE NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE FOR THIS ACTION IS 237990; OTHER HEAVY AND CIVIL ENGINEERING CONSTRUCTION WITH A SMALL BUSINESS SIZE STANDARD OF $45M. AS PRESCRIBED IN DFARS 204.7504(A), THIS REQUIREMENT INCLUDES DFARS CLAUSE 252.204-7021 COMPLIANCE WITH THE CYBERSECURITY MATURITY MODEL CERTIFICATION (CMMC) LEVEL REQUIREMENTS. THE CMMC LEVEL REQUIRED BY THIS SOLICITATION IS CMMC LEVEL 1. BID OPENING WILL OCCUR ONE (1) HOUR AFTER BID CLOSING AT 2:00 PM PST DECEMBER 4TH, 2026.
80%
Solicitation12/04/2026

Additional Details

Solicitation Number

PANNWD-26-P-0000033137

Archive Date

Sep 16, 2026

Office Address

PORTLAND, OR, 97204-3495