3-Season Sleep System & Components
Archived on December 24, 2025. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM EST
- Posted
- December 3, 2025
- Notice type
- Presolicitation
- Set-aside
- Partial Small Business Set-Aside (FAR 19.5)
- NAICS
- NAICS 33999 All Other Miscellaneous Manufacturing (reported as 339990)
- Agency
- Department of WarDEFENSE LOGISTICS AGENCY
Notice details
- Office
- TROOP SUPPORT CLOTHING & TEXTILE.DLA TROOP SUPPORT
- Place of performance
- Philadelphia, Pennsylvania, 19111
- Last updated
- Nov 5, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 3-SPE1C1-25-R-0112
- Notice ID
- 8e38c64d27644a208d2b48785ee66992
Description
A request for proposals will be solicited for the 3-Season Sleep System & Components. See items and corresponding quantities below:
Complete System:
NSN: 8465-01-573-4326 - 3 Season sleep System, Regular
NSN: 8465-01-576-5222 - 3 Season Sleep System, Extra Long
MIN: 2,000 MAX:40,000
Note: The above item quantities are interchangeable as far as size combination.
Sleeping Bags :
NSN: 8465-01-574-3998 - Sleeping Bag, Regular
NSN: 8465-01-574-4004 - Sleeping Bag, Long
NSN: 8465-01-611-6040 - Sleeping Bag, Extra Long
MIN: 20,000 MAX: 400,000
Note: The above item quantities are interchangeable as far as size combination.
Components:
NSN: 8465-01-574-4005 - Bivy Cover, Regular
NSN: 8465-01-611-6047 - Bivy Cover, Extra Long
NSN: 8465-01-574-4003 - Bivy Compression Stuff Sack
NSN: 8465-01-574-4494 - Mesh Storage Bag
NSN: 8465-01-608-7503 - ECW Outer Bag, Regular
NSN: 8465-01-623-2346 - ECW outer Bag, Extra long
NSN: 8465-01-608-7507 - ECW Compression Stuff Sack
MIN: 33,500 MAX: 670,000
Note: The above item quantities are interchangeable as far as size/component combination.
This procurement will be solicited with two equal lots (50/50) of the 3SSS and components with a four (4) year Tiers. Lot #1 will be solicited as Unrestricted with evaluation preference for Hub Zone Small Business Concerns. Lot #2 will be solicited as a Small Business Set Aside. It will be an Indefinite Delivery Type Contract. Delivery destinations for these items are VSTJ (Pendergrass Distribution Center, Pendergrass, GA).
The award will utilize Low Price Technically Acceptable (LPTA) procedures; past performance will not be considered during evaluations. The government intends to award to the low priced firm who is deemed to be technically acceptable. Technical Acceptability is being defined herein as the proposal meeting the requirements of the solicitation and Berry Amendment Compliance.
One Product Demonstration Model (PDM) for NSN: 8465-01-573-4326, 8465-01-608-7503 & 8465-01-608-7507 will be required to be presented with offeror’s proposal. No revisions to the PDM will be acceptable. Certified Test Reports shall be furnished with offeror’s proposal at the time and date of the initial closing of the solicitation. The PDM will be subjected to evaluation for the below listed characteristics of GL-PD-14-01, dated 17 April 2015, the interim changes listed in the solicitation, and section M of the solicitation. The evaluation of the PDM test reports will include conformance to Finished Weight, Dimensional/Interoperability, CLO Value, Bivy Cover Base Fabric Spray Rating after 20 Launderings, Bivy Cover Base Fabric Hydrostatic Resistance after 20 Launderings, Bivy Cover Base Fabric Oxygen Permeation, Bivy Cover Base Fabric Moisture Vapor Transmission Rate (MVTR) and Compression Stuff Sack Purge Valve Leakage. Unacceptability of PDM’s that do not conform to these characteristics may result in the rejection of the entire offer. Failure to furnish PDM Test Reports by the time and date specified in the solicitation may be cause for rejection of the entire offer if not otherwise acceptable under the provisions for considering late offers.
The following clauses will be incorporated into the request for proposal:
FAR 46.202-3 “Standard Inspection Requirements”
FAR clause 52.246-2 “Inspection of Supplies – Fixed-Price (AUG 1996)”
FAR clause 52.246-15 “Certificate of Conformance (Apr 1984)”
DFARS clause 252.225-7012 “Preference for Certain Domestic Commodities (Apr 2022)”
The Defense Appropriations and Authorization Acts and other statutes (including what is commonly referred to as “The Berry Amendment”) impose restrictions on the DoD’s acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies.
Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form.
This is a pre-solicitation synopsis. The actual Request For Proposals (RFP), with information and specifics, will be posted on https://www.dibbs.bsm.dla.mil/. Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of information that will be found include: 1. On the DLA Internet Bid Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. 2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the Central Contractor Registration (CCR) system. 3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option
to accept their CCR registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance).
For information regarding this synopsis, contact Turkessa Cook-Muhammad by e-mail at Turkessa.cook@dla.mil.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
- 3Version 3PresolicitationArchivedCurrent
3-Season Sleep System & Components
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Proposed procurement for NSN 8465015733374 BAG,DROP LEG: Line 0001 Qty 250 UI EA Deliver To: PECKHAM INC By: 0113 DAYS ADO Line 0002 Qty 250 UI EA Deliver To: PECKHAM INC By: 0113 DAYS ADO Line 0003 Qty 250 UI EA Deliver To: PECKHAM INC By: 0113 DAYS ADO Approved source is 0SWN5 G0000577. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | 51% | Combined Synopsis | 11/23/2026 |
1. This Request for Quote (RFQ) is for a Foreign Military Sales (FMS) procurement for Government of Columbia. 2. Vendors shall fill out all the green cells in RFQ Attachment 1 in accordance with the instructions within RFQ Attachment 1. NSN information is provided for reference only. Please quote the color/pattern requested in Column D. 3. Vendors shall also provide technical information that clearly shows how the product being proposed meets each of the specifications identified in the part number in column B of the RFQ Attachment 1. Note: Vendors will provide side-by-side compression for alternative materials being proposed. Please highlight, circle, or otherwise identify in your technical information provided where your product meets the specifications identified in the part number. 4. The Government anticipates utilizing price analysis to determine a fair and reasonable price of the vendors proposed unit prices in Unison Marketplace. Accordingly, the analytical techniques and procedures prescribed in FAR 15.404-1 for evaluating offeror quotes may be used singly or in combination with others as determined by the Contracting Officer based on competition and other factors to determine a fair and reasonable price. If after receipt of proposals the Contracting Officer determines that there is insufficient information available to determine a fair and reasonable price, then additional data other than certified cost or pricing data for use in evaluation may be required to be submitted by offerors upon the Governments request. 5. Basis of Award - In the event that no single offeror proposes all items, or no offeror proposes a fair and reasonable price on all items, the Government may make multiple awards to different offerors for portions of an individual FMS case. In this event, awards may be made to multiple offerors representing the Lowest Price Technically Acceptable (LPTA) fair and reasonable proposal for those items they proposed. To be eligible for award the vendors shall meet 2 and 3 above as well as its price be deemed fair and reasonable in accordance with number 4 above. The winning vendor will be the Lowest Price Technically Acceptable (in Unison Marketplace). Only ONE (1) quote will be acceptable. Please do not provide multiple options. 6. The Government intends to make award based on the initial quote submissions without asking questions or requesting revisions. Therefore, each offer should contain the Offeror's best terms from a price and technical standpoint. However, the Government reserves the right to ask questions at any time during the evaluation of quotes, if it is determined to be in the best interest of the Government. Questions may be asked of some, all, or none of the Offerors to enhance Government understanding of quotes; allow reasonable interpretation of the quote; or facilitate the Government's evaluation process. 7. Please note information provided in vendors proposed RFQ Spreadsheet is subject to incorporation into the awarded call. 8. Wide Area Workflow (WAWF) & shipping instructions will be given at time of award of the respective Calls. 9. Country will accept partial shipments. Drop shipments are not permitted, the vendor shall provide one (1) shipping address to be used for all items in RFQ Spreadsheet. Material must be made available for pick up within the continental U.S. 10. The award of these calls is subject to the availability of funds. The Government reserves the right to cancel this requirement without incurring any proposal fees. 11. Please submit any questions via email to Unison Marketplace by 05 November 2026 and your proposals to Unison Marketplace via by 1:00 PM (EST) on 13 November 2026. ( https://usg01.safelinks.protection.office365.us/?url=https%3A%2F%2Fmarketplace.unisonglobal.com%2Ffbweb%2FfbobuyDetails.do%3Ftoken%3DolwZ14zRF3134gls5qROoJutQ5sKd3h3qwUoQyIUgYFSCc2h%252FrlGFWI%253D&data=05%7C02%7Cjason.h.goode.civ%40army.mil%7Cf1c2cacf0250493a0b2408df338d6ba7%7Cfae6d70f954b481192b60530d6f84c43%7C0%7C0%7C639286354620870013%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=bF7NoLHWP2ff8yhpZe7MfQNS4%2BuSOhD6doMQ9nLq0pg%3D&reserved=0 ) | 51% | Market Research | 11/13/2026 |
amended to change PSC Code and NAICS Bottom Line Up Front (BLUF)The Brigade requires the procurement of ten (10) commercial-off-the-shelf (COTS), brand-agnostic Automated 3D Digital Footwear Fitting Systems and associated annual technical service. This acquisition modernizes the Initial Entry Training (IET) Clothing Initial Issue Point (CIIP) across the Reception Battalions. It directly addresses initial issue throughput constraints, eliminates manual sizing inaccuracies, and mitigates preventable lower-extremity musculoskeletal injuries (MSKIs) among incoming trainees.Operational JustificationReception Battalions process thousands of trainees per cycle under stringent processing timelines. Traditional manual measurement devices are prone to significant operator error, fail to capture volumetric dimensions and arch compression under load, and regularly lead to improperly fitted combat footwear. Ill-fitting boots remain a primary driver of preventable sick call visits, cellulitis, severe blister friction, and training pipeline attrition during Basic Combat Training (BCT) and One Station Unit Training (OSUT). Implementing an automated digital system allows duty personnel to capture comprehensive foot dimensions in under 20 seconds per soldier, ensuring objective, repeatable fit accuracy that protects force health and training timelines.Salient CharacteristicsTo maintain full and open competition, the solicited systems must operate using non-invasive optical or sensor-based 3D surface scanning that measures standing volumetric foot dimensions under standard body weight. The units must capture dual-foot length, width, arch height, heel width, ball girth, and pressure distribution within a single scan cycle not exceeding 20 seconds. Systems must incorporate automated sizing algorithms that directly convert millimeter scan data into standard military combat boot sizing across all standard lengths and widths (Narrow, Regular, Wide, and Extra Wide). Additionally, each unit must feature a self-contained, ruggedized platform built for high-tempo daily recruit volume, an intuitive touchscreen interface for operators, and continuous software support and diagnostic calibration capability.Unit Distribution and Operational ContinuityThe ten requested systems will be allocated based on trainee reception volume and mission continuity requirements. The 120th Adjutant General (AG) Battalion will receive four (4) systems to support its high-volume throughput requirements. The 30th, 43rd, and 95th AG Battalions will each receive two (2) systems to outfit their primary CIIP processing stations. The final system will be assigned to the Brigade/LTB headquarters as an operational reserve float. This designated spare ensures that any unexpected hardware malfunction, maintenance cycle, or recalibration event at a subordinate reception battalion can be addressed immediately without disrupting intake schedules. | 51% | Combined Synopsis | 09/17/2026 |
Solicitation SPE1C1-26-R-0061 is currently available on DIBBS and will be issued as a total small business set-aside and utilize a best value tradeoff approach. The Government intends to make a single award to the responsible offeror who meets all terms and conditions of the solicitation and is determined to be the best value to the Government after an integrated assessment of technical merit and price. The proposed acquisition is for the manufacture and delivery of the modular lightweight load-carrying equipment (MOLLE) Hinge Modular System (HMS) Manpack Radio and Components, which are made in accordance with CO-PD-02-02R dated May 9, 2024. This acquisition will result in one (1) award for a firm-fixed price, indefinite delivery, indefinite quantity type contract. The contract shall be for a term of 36 months and will include three (3) separate pricing tiers. Each tier shall be for a 12-month period. FOB destination and inspection and acceptance at origin. The NAICS code is 315990 - Apparel Accessories and Other Apparel Manufacturing; the size standard is 600 employees. A. Carrier, HMS Manpack Radio Set / 8465-01-718-3331 Unit of Issue: Set (SE) Minimum QTY Annual Estimated QTY Maximum QTY Tier 1 165 SE 660 SE Tier 2 660 SE Tier 3 820 SE 2,675 SE B. Components Packboard / 8465-01-718-3341 Rucksack / 8465-01-718-3344 Bag, Accessories / 8465-01-718-3346 Pouch, Tubular, Antenna / 8465-01-718-3352 Harness, Packboard / 8465-01-718-3356 Unit of Issue: Each (EA) Quantity Over Tier 1 through Tier 3 Minimum QTY Annual Estimated QTY Maximum QTY* Packboard 0 EA 800 EA 3,000 EA Rucksack 0 EA 800 EA 3,000 EA Bag, Accessories 0 EA 800 EA 3,000 EA Pouch, Tubular, Antenna 0 EA 800 EA 3,000 EA Harness, Packboard 0 EA 800 EA 3,000 EA *The government reserves the right to make conversions of available quantities of these components provided the overall maximum quantity or maximum dollar value, when combined is not exceeded. The best value tradeoff source selection procedures will be in accordance with the DoD Source Selection Procedures dated August 20, 2022. The trade-off will allow for an integrated assessment of PDMs, past performance, and a fair and reasonable price to determine the best value to the Government. Passing PDMs and Past Performance when combined are more important than cost or price. As other evaluation factors become more equal, the evaluated price becomes more important. Refer to Section L and Section M for evaluation factor details. Offerors are advised that if they take exception to any of the terms and conditions in the solicitation, their offer may be excluded from consideration of award. The solicitation’s Non-Cost/Price Evaluation Factors, Sub-factors, and Sub-elements (listed in order of importance): a. Technical Evaluation Factor: product demonstration models (PDMs) (All sub-factors are of equal importance) i. Evaluation Subfactor: 1. Visual Requirements 2. Dimensional Requirements b. Evaluation Factor: past performance – performance confidence assessment (All sub-factors are of equal importance) i. Evaluation Subfactor: 1. Recency 2. Relevance 3. Past Quality of Products a. Sub-element: Past Quality b. Sub-element: Past Delivery Performance 1. Product Demonstration Model (PDM) Requirement: Two (2) fully assembled sets (SE) of Carrier, Radio Set, MOLLE, HMS Manpack Radio (NSN 8465-01-718-3331) shall be examined for visual and dimensional requirements. For PDM purposes, all sewn-in labels shall be sized to the requirements but left blank and are for placement purposes only. a. NOTE: No alternate materials shall be used – the only exception is color. All color substitutions shall be called out and must include drawing number and find number of component or otherwise will be classified as a defect. 2. Past Performance Evaluation: Offeror’s record of past performance must be returned with complete information provided in accordance with Section L of the subject solicitation. 3. Price Evaluation: All offered prices will be evaluated against the requirements of the solicitation. The offered prices (and if requested with initial proposal or during discussions, cost or pricing data or information other than cost or pricing data) will be evaluated in accordance with FAR 15.4 to ensure that award will be made at fair and reasonable prices. Offeror must provide a unit price for each tier and NSN within Section B of the subject solicitation. FAT Requirement: A First Article Test (FAT) is required under clause FAR 52.209-4, First Article Approval—Government Testing--Alternate I. The contractor shall bear all costs. Under this clause, two (2) fully assembled sample set (SE) shall be submitted of Carrier, Radio Set, MOLLE, HMS Manpack Radio (NSN 8465-01-718-3331) 60 days after the date of award. First article test samples will be examined for visual, dimensional, and fit (if applicable in accordance with the specification). All material shall be contractor furnished. Offerors are cautioned that all components must be of domestic origin in compliance with clause DFARS 252.225-7012 Preference for Certain Domestic Commodities. Production Lead Time (PLT): The production lead time for the first delivery order will be 90 days after FAT acceptance. All subsequent delivery orders will be 90 days after the date of order in block 3 of the delivery order(s). DLA Depots: Deliveries will be made to DLA’s third-party logistics (3PL) depots: 1. UY0157 – Peckham Inc (Lansing, MI) 2. UY0159 – LVI-OCIE SE Pendergrass Distribution Center (Pendergrass, GA) 3. SD0131 – Travis Association for the Blind (Austin, TX) FAR clause 52.215-1, Instructions to Offerors - Competitive Acquisition is incorporated in this solicitation. All offerors shall be registered in SAM to be eligible for award. All responsible sources may submit offers which, if timely received, shall be considered. Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form. It is estimated that the solicitation will be posted on https://www.dibbs.bsm.dla.mil/ within 15 days of this notice. Instructions for submitting offers will be provided within the solicitation remarks and contract sections. Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of the information that will be found include: A. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. B. To register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the System for Award Management (SAM). C. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons, and passwords for their CAGE. DIBBS Super User: * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their System for Award Management (SAM) registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as "The Berry Amendment") impose restrictions on the DoD's acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted, or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies. DLA Troop Support has launched the Technical Data Management Transformation (TDMT) system as the new DLA technical document repository for Technical Data Packages (TDP). TDMT is accessible through the DIBBS platform’s homepage. Under “DIBBS Notices” there are several topics on TDMT access, user assistance and appropriate help desk contact information for troubleshooting. NOTE: It is highly recommended that offerors ensure enrollment and access to TDMT, as it is the dedicated source to view Technical Data Packages (TDP). Offerors should ensure that multiple authorized personnel have TDMT access to avoid disruptions caused by personnel absences or availability issues. DLA Troop Support is not responsible for and will not provide accommodation if offerors fail to access TDMT in DIBBS because authorized personnel are unavailable or lack the required registration or system access. | 50% | Pre-Solicitation | 11/30/2026 |
Proposed procurement for NSN 8455015031103 CLASP,NECKTIE: Line 0001 Qty 20000 UI EA Deliver To: TRAVIS ASSOCIATION FOR THE BLIND By: 0120 DAYS ADO Line 0002 Qty 20000 UI EA Deliver To: TRAVIS ASSOCIATION FOR THE BLIND By: 0120 DAYS ADO Line 0003 Qty 20000 UI EA Deliver To: TRAVIS ASSOCIATION FOR THE BLIND By: 0180 DAYS ADO Line 0004 Qty 20000 UI EA Deliver To: TRAVIS ASSOCIATION FOR THE BLIND By: 0180 DAYS ADO Line 0005 Qty 20000 UI EA Deliver To: TRAVIS ASSOCIATION FOR THE BLIND By: 0180 DAYS ADO Line 0006 Qty 19800 UI EA Deliver To: TRAVIS ASSOCIATION FOR THE BLIND By: 0180 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically. | 45% | Combined Synopsis | 11/13/2026 |
Additional Details
Solicitation Number
3-SPE1C1-25-R-0112
Archive Date
Dec 24, 2025
Office Address
PHILADELPHIA, PA, 19111-5096