GovChime
Notice ID: a1da2db63d9448259096a4ee84322e64Combined Synopsis/SolicitationArchived

Purchase of Skydio X10 and Accessories

Archived on September 14, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM EDT
Posted
September 10, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
No Set aside used
NAICS
336411: Aircraft Manufacturing
Agency
Department of JusticeDRUG ENFORCEMENT ADMINISTRATION

Notice details

Office
HEADQUATERS
Place of performance
Virginia Beach, Virginia
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
15DDHQ26Q00000212
Notice ID
a1da2db63d9448259096a4ee84322e64

Description

Amendment 1 adds the following information to the Description:

Award will be made to the lowest price, technically acceptable quote, for only the brand name and specific part numbers requested in the RFQ. Substitutions will be determined technically unacceptable. Quotes must include a letter from the Skydio indicating the firm as an authorized reseller of the items.

U.S. Origin and Domestic Shipping: All items delivered under this requirement must originate from and be manufactured/assembled within the United States to comply with FAR 52.225-1, Buy American - Supplies. Additionally, all final packaging and direct shipment to the designated project site must originate from a stocking location or manufacturing facility within the 50 United States. Drop-shipping or routing inventory from international ports or foreign distribution hubs directly to the final destination is not prohibited. 

The quote must indicate all items are of U.S Origin and Domestic Shipping. Pricing should be completed on the RFQ form attached to this notice. Quoters can include attachments if needed. 

This is a combined synopsis/solicitation for commercial items under RFO Part 12.201. No separate written solicitation will be issued. This solicitation is issued as a Request for Quotation (RFQ) with NAICS code 336411 and size standard 1500 Employees. This requirement is unrestricted. 

  • Requirement: Purchase of Skydio X10 Brand and Accessories. See attached RFQ 15DDHQ26Q00000212 for additional details.
  • Delivery: 12/31/2026 or sooner
  • Submission: Submit quotes electronically to Kathrine.r.leach@dea.gov by 9/14/2026 at 4:00 PM ET. 

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (2)

  • RFQ 15DDHQ26Q00000212.pdf

    3.3 MBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • Competition Restriction Justification 12.102 SAP Commercial Acquisitions - D-26-SG-0067 - redacted.pdf

    595 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationArchived

    Purchase of Skydio X10 and Accessories

    Notice 30b2d1f84d034f71b03c14eaa1129277 on SAM.gov

  2. 3
    Version 3Combined Synopsis/SolicitationArchivedCurrent

    Purchase of Skydio X10 and Accessories

    Notice a1da2db63d9448259096a4ee84322e64 on SAM.gov

  3. 6
    Version 6Award NoticeArchived

    Type changed from Combined Synopsis/Solicitation to Award Notice

    Purchase of Skydio X10 and Accessories

    Notice 01093ff3ee214650a26d92139893fba0 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Naval Air Systems Command (NAVAIR), on behalf of the F/A-18E/F and EA-18G Program Office (PMA-265), is conducting market research to determine the industrial base’s existing capability and facility capacity to provide supplemental or secondary Service Life Modification (SLM) turnkey capacity for F/A-18E/F Super Hornet and EA-18G Growler aircraft starting in FY29. The Government seeks mature, currently operational—facilities, personnel, processes, tooling, and infrastructure capable of supporting SLM workload. The Government is not seeking conceptual or developmental solutions that would require significant new construction, extensive infrastructure development, or multi-year implementation before becoming operational. The Government currently executes these requirements through a hybrid framework utilizing the Original Equipment Manufacturer (OEM) (The Boeing Company) and a Naval Aviation Enterprise organic depot (Fleet Readiness Center Southwest) under a public private partnership with the OEM. To support long-term strike fighter inventory requirements, the Government is evaluating the availability of additional commercial or second-source depot modification repair overhaul (MRO) capacity. Information submitted in response to this notice will assist the Government in determining its long-term acquisition strategy through 2038, including whether to establish an additional qualified source to supplement the current capacity or maintain the current hybrid framework mentioned above under the authority of FAR 6.103-3(b)(1) (Defense Pricing, Contracting, and Acquisition Policy (DPCAP) Class Deviation (CD) 2026-O0017) / 10 U.S.C. 3204(a)(3)(A) (Industrial Mobilization). PMA-265 anticipates a maximum SLM induction profile of up to 47 aircraft per year across the industrial base. Actual aircraft allocation among available sources may vary based on Fleet requirements, aircraft availability, demonstrated performance, schedule, and available capacity. 1. Scope of Interest The Government is seeking information on industry capability to perform the SLM workload to supplement current capacity, including but not limited to: Aircraft induction, preservation, inspection, and documentation; F/A-18E/F and EA-18G SLM Specification Modification work; Installation of applicable Structural Technical Directives (TDs) and Advanced Capability Modifications such as Block III upgrade kits; Procurement and management of all required material, including long-lead material, using corporate approaches that support anticipated year-of-execution requirements and ensure material is available for installation when required; Inspection-based repairs and structural modifications; Manufacturing or sourcing of repair parts and materials, as required; Aircraft systems troubleshooting and functional verification; Aircraft records and database updates; and Support for Functional Check Flights and coordination with Government representatives. The Government recognizes that individual respondents may be capable of supporting only a subset of this work or a limited annual quantity. Responses identifying supplemental capability, secondary capability, or potential teaming arrangements are encouraged. 2. Information Requested Interested firms are requested to provide the following information: I. Company Information Company name, address, point of contact, telephone number, and email address. Business size and applicable socioeconomic status, if any. Relevant experience performing MRO / depot-level maintenance, advanced avionic systems modification, modernization, structural repair, or sustainment work on tactical aircraft. II. Facility Information Location(s) of existing facilities proposed for this effort. Number, type, and dimensions of available aircraft bays or work positions, including usable floor area, hangar-door dimensions, overhead clearance, and any facility limitations. For planning purposes, the aircraft footprint is 45 feet wide by 61 feet long Availability of a suitable runway and airfield support for F/A-18 and EA-18G series aircraft. Current facility utilization and the earliest date capacity could be made available. Access to required security, quality assurance, tooling, material handling, and aircraft-support infrastructure. Current, or ability to obtain, Defense Security Services (DSS) facility clearance of Secret. Consistent with Executive Order 14372, Prioritizing the Warfighter in Defense Contracting, and the USW(A&S) memorandum, Prioritizing the Warfighter and Negotiation of Contractor Facilitation Costs (dated 4 May 2026), respondents shall identify whether they anticipate using their own capital to fund stand-up costs necessary to perform the proposed work and describe any Government support, reimbursement, or other enablers required to establish the proposed capability. III. Capacity and Throughput Maximum number of F/A-18E/F and/or EA-18G aircraft the company could induct and complete annually. Expected induction ramp-up profile by year. Estimated average turnaround time from induction through return to the Fleet. Constraints that may limit throughput, including workforce, facilities, supply chain, engineering support, tooling, or Government-furnished material. Ability to adjust capacity in response to changing Fleet requirements or surge demand. Availability of funds to purchase all material to protect quantity throughput and maintain a stock of consumables to perform repair incidents throughout the modification (such as addressing corrosion), parts managements to include obsolescence and manufacturing parts capability. IV. Technical Capability Experience with F/A-18-series aircraft or comparable military tactical aircraft. Capability to perform structural inspections, repairs, modifications, TD incorporation, Non-destructive Inspections (NDI), wiring/electrical work, and systems troubleshooting. Capability to manufacture repair parts or develop repair procedures when required, using Government- or original equipment manufacturer-provided engineering direction. Ability to manage material procurement, kit installation, consumables, and repair-incident-to-modification requirements. Experience coordinating with the Defense Contract Management Agency (DCMA) or similar Government quality-assurance organizations. Ability to recruit, retain, and sustain sufficient qualified personnel to support anticipated SLM workload, including structural engineering personnel eligible for appointment as Naval Air Systems Command Designated Engineering Representatives (NAVDERs) to support the engineering analysis and disposition of aircraft-specific structural findings within the scope of authority delegated by NAVAIR. Respondents should describe their current and projected staffing capacity; recruitment, retention, and succession approaches; and ability to surge personnel as workload requires. V. Cybersecurity Ability to comply with applicable Department of the Navy, NAVAIR, and Department of War cybersecurity requirements for the protection, handling, storage, transmission, and access of Government information and data in performance of the proposed work. VI. Additional Information Identify any Government support, data, tooling, facilities, training, technical assistance, or other enablers that would be needed to establish or expand SLM capability. Provide any recommended acquisition, phasing, or transition approach that would help establish supplemental capacity while minimizing risk to Fleet readiness. 3. Response Instructions Responses should be limited to ten (10) pages and submitted electronically to jacob.r.heintze.civ@us.navy.mil no later than 3 December 2026. This RFI is issued for market research and planning purposes only. It is not a solicitation, request for proposal, or commitment by the Government to award a contract or reimburse any costs associated with responding. Information received may be used to assess available industry capability, capacity, potential small-business participation, and possible acquisition approaches to provide supplemental or secondary capacity for SLM work on F/A-18E/F Super Hornet and EA-18G Growler aircraft.
57%
Market Research12/03/2026
AMD 0009 - Please review Section A of N0001926R1014-0009 for a summary of the changes included within this amendment. // REQUEST FOR PROPOSAL (RFP) Undergraduate Jet Training System (UJTS). Please access the RFP and associated attachments via the PIEE Solicitation Module Link listed within the attachments section of this notice. Related Notice(s) (sam.gov) - 25-0001_UJTS; N00019-26-R-1014 DRAFT REQUEST FOR PROPOSAL (RFP) Undergraduate Jet Training System (UJTS).
57%
Solicitation10/30/2026
This is a Request for Proposal for the Center Wing Box. This effort requires the Enhanced Service Life (ESL) Center Wing Box (CWB) kits for the C-130 Center Wing Box (CWB) program. The North American Industry Classification System Code (NAICS) for this requirement is 336411, Other Electronic Component Manufacturing, with a corresponding small business size standard of 1500 employees, and Product and Service Code (PSC) 1510. This acquisition will result in the award of a Definitive C-Type contract with Firm Fixed Priced and Cost Reimbursement – No Fee (CRNF) contract line items (CLINs). This contract will include a five (5) year period of performance (PoP) consisting of a one (1) year basic period and four (4) one (1) year options (Options I to IV). (in accordance with RFO 52.217-9, Option to Extend the Term of the Contract). This acquisition will be Sole Source (Other than Full and Open Competition) to: Lockheed Martin Corporation (CAGE Code 98897) Lockheed Martin Aeronautics Company (LMAC) 86 South Cobb Drive SE Marietta, GA 30063 CAGE Code: 98897 The statutory authority permitting other than full and open competition is RFO 6.103-1 – 10 U.S.C. 3204(a)(1), Only One Responsible Source - No Other Supplies or Services Will Satisfy Agency Requirements. All comments, recommendations, concerns, and questions in regards to this notice should be submitted to the PCO, Oya Harrison, oya.harrison.1@us.af.mil and the Contract Specialist Brontavious Harris, brontavious.harris@us.af.mil & Moneka Johnson, moneka.johnson@us.af.mil
57%
Solicitation09/21/2026
This Synopsis serves as a notice of intent that the C-130 Mobility Aircraft Contracting Branch, AFLCMC/WLNK, at Robins Air Force Base, GA, anticipates issuing a Request for Proposal (RFP) on SAM.gov under Notice ID FA8504-26-R-B005 for the C-130H Center Wing Box). This effort requires the Enhanced Service Life (ESL) Center Wing Box (CWB) kits for the C-130 Center Wing Box (CWB) program. Component Kits of supplies: AF92-1454 1560K0100076RLG, P/N 3365000-31 1560K0100076VLG, P/N 3365000-51 AF92-1532 1560K0100076RLG, P/N 3365000-31 1560K0100076VLG, P/N 3365000-51 AF93-7311 1560K0100076ALG, P/N 3365000-1 1560K0100076VLG, P/N 3365000-51 AF94-7315 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-51 AF94-7316 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-51 AF94-7318 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-51 AF94-7319 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-51 AF94-7320 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-51 AF94-7321 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-5 This acquisition will be Sole Source (Other than Full and Open Competition) to: Lockheed Martin Corporation (CAGE Code 98897) Lockheed Martin Aeronautics Company (LMAC) 86 South Cobb Drive SE Marietta, GA 30063 CAGE Code: 98897 The statutory authority permitting other than full and open competition is FAR 6.103-1 – 10 U.S.C. 3204(a)(1), Only One Responsible Source - No Other Supplies or Services Will Satisfy Agency Requirements. The North American Industry Classification System Code (NAICS) for this requirement is 336411, Other Electronic Component Manufacturing, with a corresponding small business size standard of 1500 employees, and Product and Service Code (PSC) 1510. This acquisition will result in the award of a follow-on contract with the majority being a Firm-Fixed Price (FFP) definitive quantity contract. There shall also be Cost Reimbursable – No Fee (CRNF) contract line items (CLINs) for Travel and Over and Above. This contract will include a five (5) year period of performance (PoP) consisting of a one (1) year basic period and four (4) one (1) year options (Options I to IV). (in accordance with FAR 52.217-9, Option to Extend the Term of the Contract) and Option to Extend Services, FAR 52.217-8. The approximate Request for Proposal (RFP) issue date is FY26 Q3. In accordance with FAR 5.101(c)(4)(vi) all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Drawing packages defining CWB kits for the affected aircraft were developed at Government expense under previous contracts, so the USG retains Unlimited Data Rights to the CWB kit Technical Data Packages (TDPs) Foreign Participation is not permitted. All comments, recommendations, concerns, and questions in regards to this notice should be submitted to the PCO, Oya Harrison, oya.harrison.1@us.af.mil and the Contract Specialist Brontavious Harris, brontavious.harris@us.af.mil & Moneka Johnson, moneka.johnson@us.af.mil
57%
Pre-Solicitation04/24/2026
25 March 2026 Update: The Government intends to release the Undergraduate Jet Training System (UJTS) Final Request for Proposal (RFP) by the end of the week. Please access the Final RFP and associated attachments via the PIEE Solicitation Module. DRAFT REQUEST FOR PROPOSAL (RFP) Undergraduate Jet Training System (UJTS). Please access the DRAFT RFP and associated attachments via the PIEE Solicitation Module Link listed within the attachments section of this notice. Related Notice (sam.gov) - 25-0001_UJTS.
57%
Pre-Solicitation02/23/2026

Additional Details

Solicitation Number

15DDHQ26Q00000212

Archive Date

Sep 14, 2026

Office Address

SPRINGFIELD, VA, 22152