Notice ID: e4fa5b14a4b549eda611d7b38c2b322cAward NoticeAwardedArchived
Dental Polishing Scalers
Awarded on May 19, 2026. The description is published on SAM.gov: Full description on SAM.gov.
Awarded tounder 36C24W26P0024 (source: SAM.gov award notice)• $20.6K
Overview
- Posted
- May 21, 2026
- Notice type
- Award Notice
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 339114: Dental Equipment and Supplies Manufacturing
- Agency
- Department of Veterans Affairs
Notice details
- Office
- RPO WEST (36C24W)
- Place of performance
- Bakersfield, California, 93308
- Last updated
- Oct 30, 2026
- First published
- Last updated on SAM.gov
- Award date
- May 19, 2026
- Award amount (SAM.gov award notice)
- $20.6K
Identifiers
- Solicitation number
- 36C24W26P0024
- Notice ID
- e4fa5b14a4b549eda611d7b38c2b322c
- Award number (PIID)
- 36C24W26P0024
Description
No description in the SAM.gov data feed for this notice.
Award Overview
Award Number
36C24W26P0024
Award Amount (SAM.gov award notice)
$20.6K
Award Date
May 19, 2026
Awardee
Awardee Address
Washington, DC 20002, UNITED STATES
Line Item Number
36C24W26Q0138
Original Solicitation
Notice ID: e4fa5b14a4b549eda611d7b38c2b322c
Posted Date: May 21, 2026
Original Response Deadline: Not specified
Contacts
Contracting Officer
Primary Contact
Documents
Files (1)
- Download
S02 _ 36C24W26Q0138_ updated.pdf
639 KBAdded in Solicitation version 5Posted
Lifecycle
- 2Version 2SolicitationArchived
Dental Polishing Scalers
- 5Version 5Award NoticeArchivedCurrent
Type changed from Solicitation to Award Notice
Dental Polishing Scalers
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
See attached solicitation for METRx Instruments OR Equal. This is a brand name or equal solicitation with small business set aside IAW RFO Part 12. Please see Addendum to 52.212-1 Instructions to Offerors and 52.212-2 Evaluation for important information on submitting your quote and how quotes will be evaluated. | - | Combined Synopsis | 11/13/2026 |
This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with Part 12. This announcement constitutes the only solicitation. Offers are being requested, and a separate written solicitation will not be issued. Solicitation number 36C24W26Q0233 is issued as a Request for Quotation (RFQ) for Blanket Warmer Systems. This acquisition is set aside for small business concerns. This solicitation incorporates provisions and clauses by reference. PLEASE READ ALL ATTACHMENTS | - | Combined Synopsis | 08/18/2026 |
Amendment 1 posted to reopen solicitation and set new close 11/06/2026 @ 2:00 EST. Dental/Denture - equipment | - | Combined Synopsis | 11/06/2026 |
THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 339113 (size standard of 800 Employees). Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published. The Department of Veterans Affairs (VA) San Diego Healthcare System is seeking sources capable of providing medical grade bed covers equivalent to Stryker IsoTour. The list of DRAFT characteristics is intended to be descriptive, not restrictive, of the supplies/services that are required. Statement of Work: Bed Covers Introduction: The purpose of this Statement of Work (SOW) is to establish a firm fixed-price Blanket Purchase Agreement (BPA) to procure bed covers equivalent to Stryker IsoTour covers for base plus four option years. This requirement is intended to streamline the acquisition of these specific components to ensure the continued operational readiness of medical equipment. Scope of Work: The contractor shall provide the necessary parts as specified in the technical requirements section of this SOW. This is a BPA intended for recurring requirements; the government will issue individual delivery orders against this agreement as need arises during the period of performance. Period of Performance: The BPA shall remain in effect for a base period of one (1) year from the date of establishment, with four (4) optional one-year renewal terms, subject to government funding and performance evaluation. Base: 1/1/2027 12/31/2027 Option Year 1 (OY1): 1/1/2028 12/31/2028 Option Year 2 (OY2): 1/1/2029 12/31/2029 Option Year 3 (OY3): 1/1/2030 12/31/2030 Option Year 4 (OY4): 1/1/2031 12/31/2031 Deliverables: The chart below is estimated quantities for base and all option years; quantities are not a contractual statement of precise quantities that the Government will order. The quantities given are estimated only, and no guarantee of their accuracy is either given or implied. The Government will only pay for quantities that are actually ordered per each delivery order and for which the services are fulfilled. Item Description Base Estimated Quantity OY1 Estimated Quantity OY2 Estimated Quantity OY3 Estimated Quantity OY4 Estimated Quantity Top Covers Equivalent to Stryker IsoTour 63 63 251 63 63 Bottom Covers Equivalent to Stryker IsoTour 63 63 251 63 63 Salient Characteristics: NOTE: All parts must be new, unused, and in their original manufacturer packaging. No refurbished or third-party alternative parts will be accepted. VAAR 852.212-71 Gray Market and Counterfeit Items clause applies on this acquisition. No remanufacturers or gray market items will be acceptable. The contractor shall be an Original Equipment Manufacturer (OEM), authorized dealer, authorized distributor or authorized reseller verified by an authorization letter or other signed documents from the OEM. The letter must either state specific product(s) quoted or that the quoter is an authorized distributor for all the manufacturer s products. This letter must be on the manufacturer s letterhead and contains the signature of an authorized official for the manufacturer. If the offerors fail to provide a signed letter from the OEM (unless the contractor is the OEM), your quote will not be evaluated for award. If you are the OEM, state so in your quote response. Bed covers shall not void or adversely affect any existing manufacturer warranties applicable to the Stryker Model 2872 IsoTour Gel Support Surface. The contractor shall provide documentation demonstrating compatibility with the OEM mattress system and that use of the replacement cover will not negatively impact warranty coverage. Bed covers shall be fully compatible with the Stryker Model 2872 IsoTour Gel Support Surface and shall fit the existing mattress without modification to the mattress or stretcher system. Bed covers must be medical grade. Bed covers must be fluid-resistant or fluid proof. Bed covers shall permit normal use of all existing mattress attachment mechanisms. Top covers shall be designed to fit IsoTour Gel Support Surface mattresses measuring 78.75" (200 cm) L x 35.5" (90.2 cm) W x and 9.5" (24.1 cm) H. Bottom covers shall be designed to fit mattresses measuring 84.25 (213.9 cm) in L x 35.5" (90.2 cm) W and shall securely interface with the corresponding top cover to maintain intended mattress function and patient support. Schedule: Deliverables shall be provided upon the issuance of a BPA delivery order. The contractor shall provide the following: Order Acknowledgement: Within two (2) business days of receiving the order. Shipping Notification: Including tracking numbers and expected delivery dates. The following delivery addresses are applicable, and the vendor will be instructed where to deliver order. Place of Performance: The contractor will be instructed where to deliver each delivery order. VA San Diego Healthcare System 3350 La Jolla Village Drive San Diego, CA 92161 Delivery hours 7am-3pm M-F, Federal holidays excepted VA Off-Site Warehouse 9755 Birch Canyon Pl, Ste 100 San Diego, CA 92126 Delivery hours: 7am-3pm M-F, Federal holidays excepted Federal Holidays: New Year s Day January 1 Martin Luther King s Birthday 3rd Monday in January Presidents Day 3rd Monday in February Memorial Day Last Monday in May Juneteenth Day June 19 Independence Day July 4 Labor Day 1st Monday in September Columbus Day 2nd Monday in October Veterans Day November 11 Thanksgiving Day 4th Thursday in November Christmas Day December 25th The President of the United States of America may declare additional days as a Federal holiday, and if so, this holiday will automatically be added to the list above. When a holiday falls on a Sunday, the following Monday shall be observed as a Federal holiday. When a holiday falls on a Saturday, the preceding Friday shall be observed as a Federal Holiday. Quality Assurance and Inspection: The government reserves the right to inspect all delivered items. Any parts that arrive damaged, incorrect, or fail to meet the OEM specifications defined in Section 3.0 will be rejected and returned at the vendor's expense. Replacement parts must be provided within ten (10) business days of the rejection notice. Special Instructions Invoicing: Invoices shall be submitted electronically via Tungsten or the designated government payment system, referencing the specific purchase order numbers, which shall be provided on each delivery order. If your company is interested and capable of providing the required supplies/services, please provide the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of SOW requirements. For instances where your company cannot meet the SOW requirement(s), please explain. For instances where your company can meet the SOW requirement(s), please show how your company meets/exceeds each requirement. (2) Please review the list of SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A. (3) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. (4) Is your company considered small under the NAICS code identified in this RFI? (5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of SOW? (6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). (7) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. (8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6? (9) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? (10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice? (11) Please indicate whether your product conforms to the requirements of the Buy American Act? (12) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. (13) What is estimated life span of your solution? What support/services does that entail? (14) Does your proposed equipment have FDA clearance? Please specify what FDA clearance(s) have been obtained. (15) Does your organization offer a leasing solution? Please elaborate. (16) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). (17) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. (18) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (19) Please provide your SAM.gov Unique Entity ID/Cage Code number. Responses to this notice shall be submitted via email to Hestia.Sim@va.gov. Telephone responses will not be accepted. Responses must be received no later than Friday, November 20, 2026, by 10 AM Pacific Local Time. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement. | - | Market Research | 11/20/2026 |
THIS IS NOT A SOLICITATION FOR INFORMATION AND PLANNING PURPOSES ONLY 1. Subject: Sources Sought, VA Northern California Health Care- Martinez VA Medical Center Gynecological Hysteroscopy Surgical Instruments (TruClear or Equal) This Sources Sought Notice seeks to identify qualified vendors capable of providing gynecological hysteroscopy surgical instruments equivalent to (or equal to) the TruClear product line. 2. General Information Contracting Office: Department of Veterans Affairs Network Contracting Office (NCO 21) Product Service Code (PSC): 6515 Medical & Surgical Instruments NAICS Code: 339112 Surgical Appliance & Supplies Manufacturing (Vendors may identify alternative NAICS if more appropriate.) Point of Contact: Shaun Owen, Contracting Specialist Email: shaun.owen@va.gov 3. Description of Requirement The Martinez VA Medical Center seeks capability responses from businesses able to supply Medtronic TruClear surgical equipment or functionally equivalent products to support gynecological hysteroscopy procedures. The requirement is for equipment used in visualization, diagnosis, and hysteroscopic tissue removal of intrauterine pathology, including polyps, fibroids, retained products of conception, and other uterine abnormalities. The equipment shall provide: High-definition hysteroscopic visualization of the uterine cavity; Continuous-flow inflow and outflow capability to maintain uterine distention during procedures; Compatibility with hysteroscopic tissue removal devices; Minimally invasive access for diagnostic and operative hysteroscopy procedures; Safe and efficient removal of intrauterine pathology through integrated visualization and tissue removal technology. These items may be supplied as brand name (TruClear) or equal. VA Medical Center Northern California Hysteroscope Surgical instruments Item # Part Number/ Description Qty Price Extended Amount 1 72204878 Hysteroscope Mini TruClear 3   2 7209807 HANDPIECE TRUCLEAR 3   3 72203004 GYN TRAY 3   4 72204879 Hysteroscope Plus TruClear 1    SUBTOTAL with shipping included    4. Purpose of This Notice The VA is conducting market research to: Determine industry capability and capacity; Identify potential sources, including Small Business concerns; Assess whether two or more qualified SDVOSBs or VOSBs are capable of performing. Inform the acquisition strategy. 5. Instructions to Respondents Interested vendors shall submit a non binding capability statement including the following: A. Business Information (required) Company name SAM.gov UEI Business size/status: SDVOSB, VOSB, WOSB, EDWOSB, HUBZone, 8(a), Small, Large (As required in prior postings such as 36C26127Q0154 Sources Sought) Confirm active SAM.gov registration If SDVOSB/VOSB, confirm certification through VetCert B. Capability & Experience Provide documentation demonstrating capability to supply the required Gynecological items Include prior experience with VA, DOD, or private hospital surgical instrument supply Provide product literature, brochures, or cross reference sheets for brand name or equal items C. GSA / Contract Information Indicate whether items are available under GSA/FSS/NASA SEWP/NITAAC, including contract number and expiration date State any open market availability D. Product Data Indicate whether offering TruClear brand name or equal substitutes Provide equivalency documentation (technical specifications, clinical equivalency, FDA device class if applicable) RESPONDENTS OFFERING EQUAL ALTERNATIVES: Respondents are to include the manufacturer of their equal item, the Country of Origin, and an authorized distributor letter. E. Pricing Information Provide commercial pricing or discount structures (non binding) 6. Submission Details Deadline: Response is due by 15:30 Pacific Time Friday, November 13, 2026. Submission Method: Email capability responses to: shaun.owen@va.gov Subject Line: Sources Sought Response TruClear Surgical Instruments [Company Name] 7. Disclaimer This Sources Sought/RFI is for market research only. It does not constitute a solicitation, does not obligate the Government, and is not a guarantee of future acquisitions. Responses will be used solely to inform the VA s acquisition strategy. Vendors responding to this notice are not guaranteed consideration for any future solicitation. 8. Attachments None at this stage. A formal solicitation may follow. Brand Name Item or Equal: Essential/significant physical, functional, or performance characteristics. Continuous-flow inflow and outflow capability to maintain uterine cavity distention. Working channel designed to accommodate compatible TruClear tissue removal devices. Leak-resistant sealing mechanism to minimize fluid loss during procedures. Designed for minimally invasive hysteroscopic procedures involving intrauterine pathology. a) Compatibility Must be compatible with the Medtronic TruClear hysteroscopic tissue removal system. Components must function together as an integrated system for visualization and intrauterine issue removal. b) Dimensions Per order specifications c) Industry Standard Device shall meet applicable FDA and industry standards for hysteroscopic visualization and tissue removal systems. d) Purpose- Surgical procedures on patients. e) Governing Body or Organization FDA-cleared medical device. Compliant with applicable healthcare regulatory requirements. Complete generic identification Applicable model/make/catalog number- See order Manufacturer name Medtronic Warranty - One-year parts and labor with ongoing support on all equipment. Installation/Training. n/a Security- Patented and HIPAA compliant patient database with merge and sync capabilities across all systems Per VAAR 811.104 and 811.105, I certify the following regarding the above information: The salient characteristics listed above are essential to the Government s requirements. To my knowledge, the restrictions listed above will not limit the acquisition to an item peculiar to one manufacture. | - | Market Research | 11/13/2026 |
Additional Details
Solicitation Number
36C24W26P0024
Archive Date
Jun 3, 2026
Office Address
MCCLELLAN, CA, 95652