Notice ID: 95f5aff6f35d4eba9a9555f35efc18a4Combined Synopsis/Solicitation
Bean Exterior Repairs - Architect & Engineer Services
Archived on February 15, 2021. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM UTC−05:00
- Posted
- January 26, 2021
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 541310: Architectural Services
- Agency
- General Services AdministrationPUBLIC BUILDINGS SERVICE
Notice details
- Office
- PBS R5 ACQUISITION MANAGEMENT DIVISION
- Place of performance
- Indianapolis, IN, 46216
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- 47PF0020R0058
- Notice ID
- 95f5aff6f35d4eba9a9555f35efc18a4
Description
GSA Design Excellence Solicitation for Lead Design Architect C-Architect-Engineer Services Solicitation # 47PF0020R0058 Region: Region 5 - Great Lakes City: Indianapolis State: Indiana Contracting Officer: Jennifer Styzek Phone: (312) 353-1214 Project: Major General Emmett J Bean Federal Center: Exterior Repairs in Indianapolis, Indiana Building Type: Federal Office Building Historic Structure: [] YES [X] NO Client Agency: GSA Size: 1,660,000 GSF Parking Spaces: 3,400 Budget: ECC $27,000,000 - $37,000,000 Applicable Funding: Award dependent upon availability of funds. Total Small Business Set Aside The General Services Administration (GSA) Design Excellence Program seeks to commission architects and engineers to maintain and modernize our legacy federal buildings for the next 50 to 100 years of service. These projects are to demonstrate the value of integrated design that balances historic significance with current needs; balances aesthetics, cost, constructability, and reliability; and creates environmentally responsible and superior workplaces for civilian federal employees. In this context, GSA announces an opportunity for performance of architectural-engineering design in accordance with GSA quality standards and requirements. As required by law, all facilities will meet Federal energy targets and security requirements Project Description The Major General Emmett J. Bean Federal Center (MGEJ Bean) is located at 8899 East 56th Street in Indianapolis, Indiana. The building was named after Major General Emmett J. Bean, a commander of the Army Finance Center in St. Louis, and who coordinated the Center's move to Indianapolis. The MGEJ Bean was once part of Ft. Benjamin Harrison, a former military installation. Ft. Benjamin Harrison closed in 1995 and ownership of the building was transferred from the Department of Defense to GSA in October 1996. The Federal Center is a 3-story building of approximately 1.66 million gross square feet which is currently being used as a multi-tenant office building. It was modernized and renovated in 2003 to an office space type interior from its previous use as a DOD records storage facility and is eligible to be listed on the National Register of Historic Places MGEJ Bean has a National Register rating of 3. This project is intended to renovate and repair existing roof and facade system issues and deficiencies. In relation to the roof system, the southern two-thirds of the roof were replaced as part of the American Recovery and Reinvestment Act (ARRA) and was completed in 2011. This project will replace the northern third portion of the roof which was not replaced at that time. Additionally, the roof parapet at the facade and courtyard facades has moved outward from the face of the building and poses a safety risk. This project will install a permanent repair solution for this issue. The rooftop cooling towers have reached the end of their useful life and will be replaced as part of this project. In relation to the facade system, this project will repair multiple areas of deficiency on the exterior facades in addition to the installation of a new breathable elastomeric surface coating (or similar). Additionally, the window sealants have reached the end of their useful life and shall be replaced as part of this project. This project will also investigate potential water infiltration issues that may have occurred due to the failing window sealant. This investigation will consist of potential repairs or replacement of the interior wall construction underneath windows where water damage has occurred. Scope of Work The GSA intends to contract for comprehensive professional architectural and engineering services under GSA’s Design Excellence program to perform programming, design and construction support services including but not limited to; restoration and renovation design of various aspects of the exterior facade in addition to replacement and installation of various roofing systems, and cooling tower, concept design, design development and preparation of construction documents, cost estimating and value engineering, procurement support and construction administration and inspection services through project close out. Since this building is eligible for listing on the National Register of Historic Places, all design work must be coordinated with the GSA Historical Representatives for approval. This design shall be integrated with GSA’s concurrent Art in Architecture concept development, and conceive of strategies that account for minimizing disruptions to existing continuing adjacent occupancies during construction. The project is also to include GSA design standards for secure facilities, conformance to the P100 (Facility Standards for Public Buildings), sustainability goals, and shall comply with all other applicable local, state and federal requirements. Selection Process This is a request for qualifications (RFQ) of A/E firms/lead designers interested in contracting for this work. The A/E firm as used in this RFQ means an individual, firm, partnership, corporation, association, or other legal entity permitted by law to practice the profession of architecture or engineering that will have contractual responsibility for the project design. The lead designer is the individual or the team of designers and engineers who will have primary responsibility to develop the concept and the project design. A/E firms are advised that at least 35% of the level of contract effort must be performed in the Indianapolis, Indiana area where the project is located. The A/E firm will address the contractual relationship with the lead designer and project team in Stage II. At that time, the following specialty consultants will be required: lead engineer, acoustic, and environmental. The A/E selection will be completed in two stages as follows: In Stage I, interested lead designers and associated A/E firms will submit portfolios of accomplishment that establish the design capabilities of the lead designer and design firm. In Stage II, shortlisted lead designer teams will be interviewed. Stage I All documentation will be in an 8 1/2" x 11" format. The assembled content for the Stage I portfolio should be no more than 1/4 inch thick. The portfolio should include the following: a cover letter referencing the beta.SAM announcement and briefly describing the firm and its location, organizational makeup, and noteworthy accomplishments; Standard Form 330 Architect Engineer Qualifications Part II; and responses to the submission requirements and evaluation criteria listed below. An A/E Evaluation Board consisting of a private sector peer and representatives of the client and GSA will evaluate the submissions. The board will establish a shortlist of three to six firms. Identification of team members, other than the lead designer(s), is not required at this stage. Team member information should not be included in the Stage I portfolio. Submission Requirements and Evaluation Criteria: (1) PAST PERFORMANCE ON DESIGN (35%): The A/E firm(s) will submit a portfolio of not more than five similarly scoped projects completed in the last ten years (maximum of five pages per project). The narrative shall: address the firm’s approach to design solutions along with salient issues or features for each project and discuss how the client’s program, functional, image, mission, economic, schedule, and operational objectives were satisfied by the overall design/planning solution; address the relevance of submitted projects to the GSA project; and provide a client reference contact for each project, including name, title, address, email, and phone numbers. A representative floor plan, a building section and a minimum of two photographs must be included for each project. (2) PHILOSOPHY AND DESIGN INTENT (25%): In the lead designer’s words, (maximum of two typewritten pages) state the parameters he/she will apply to the challenges of: designing solutions of limited scope projects for major public facilities; meeting federal standards and codes; addressing sustainable design goals of construction waste management, energy efficiency, and environmental responsibility; managing work in occupied buildings; and integrating new design solutions into existing systems and infrastructure. (3) LEAD DESIGNER PROFILE (15%): Submit a biographical sketch (maximum of three pages) including education, professional experience, recognition for design efforts inclusive of the portfolio examples. Identify and describe areas of responsibility and commitment to each project. (4) LEAD DESIGNER PORTFOLIO (25%): Submit a portfolio representative of the lead designer’s ability to provide solutions that demonstrate design excellence. Address his or her participation in each project. If a single designer, submit a portfolio of up to three projects completed in the last ten years (maximum of five pages per project). If the lead designer is a team, submit graphics and a description of up to two projects from each lead designer or lead design discipline. The narrative shall address the design solution philosophy with salient issues and features for each project and discuss how the client’s program, functional, image, mission, economic, schedule, and operations and maintenance objectives were satisfied by the overall design/planning solution. Include tangible evidence such as certificates, awards, peer recognition, etc., demonstrating design excellence. Where there is duplication with criteria (1) Past Performance on Design solutions, the lead designer shall address his or her participation in the project. Stage II The shortlisted lead designers and associated A/E firms will be notified and asked to submit more detailed information indicating each member of the design team, including all outside consultants. Sufficient time will be provided for the lead designer and associated A/E design firm to establish its team. The firms will be required to complete Standard Form 330 Architect Engineer Qualifications Parts I and II that reflect the entire design team. The government will establish the detailed evaluation criteria and the date that these submittals are due and provide the selection criteria for the interviews along with the Stage I shortlist announcement. The board will interview each team. Candidates should be prepared to discuss all aspects of the criteria indicated above and evaluation criteria as established for Stage II, and demonstrate their ability to fulfill all project requirements. Emphasis will be placed on the lead designer’s understanding of the unique aspects of the project, their design philosophy, project management process, and quality assurance plan. Responses to the evaluation criteria and interview questions will be used to rank the shortlisted lead designers. IMPORTANT INFORMATION FOR STAGE I SUBMITTALS Firms having the capabilities to perform the services described in this announcement are invited to respond by submitting Standard Form 330 Architect Engineer Qualifications Part II, which must not be dated more than twelve (12) months before the date of this synopsis along with letter of interest and the portfolio to: Contracting Officer: Jennifer Styzek Delivery Address: matthew.nelson@gsa.gov and jennifer.styzek@gsa.gov Phone Number: (312) 353-1214 ALL STAGE I SUBMISSIONS ARE DUE by 4:00 PM Central Standard Time on Wednesday, June 17, 2020. The following information must be within the subject line of the email: Major General Emmett J Bean Federal Center: Exterior Repairs in Indianapolis, Indiana, Request For Qualifications #47PF0020R0058, Email __ of ___. Emails, including message body, headers, and attachments are limited to 25MB. Zip files are acceptable, but the following attachment type/extensions are not permitted in any email incoming to GSA, including inside zip files: ade, adp, asx, bas, bat, BHx, cer, chm, cmd, com, cpl, crt, dbx, dll, exe, hta, htp, inf, ins, isp, js, jse, lnk, mda, mde, mdz, msc, msi, msp, mst, nch, pcd, pif, prf, reg, scf, scr, sct, shb, shs, url, vb, vbe, vbs, wms, wsc, wsf, wsh, htm, 7z. Failure to adhere to the email limitations may result in a late submission and will be subject to FAR 52.214-7. This procurement is being made under the Small Business Competitiveness Demonstration Program (FAR 52.219-19). This procurement is a set aside and restricted to small businesses. The NAICS Code is 541310. The small business size standard is $7.5 million. HUBZone, 8(a), Service Disabled Veteran Owned Small Businesses (SDVOSB), or Women Owned Small Businesses (WOSB) are strongly encouraged to participate as prime contractors or as members of joint ventures with other small businesses. Contract will be procured under the Brooks A/E Act and FAR Part 36. The government will not allow payment for travel, living expenses, computer time or hookups for the prime or the consultants during the selection process. This is not a request for proposals.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
Solicitation:
47PF0020R0058- Market Research
- Combined Synopsis
- Market ResearchApr 27, 2020
Bean Exterior Repairs - Architect & Engineer Services
- 5×Combined SynopsisCurrentMay 17, 2020
Bean Exterior Repairs - Architect & Engineer Services
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Description The purpose of this announcement is to request new Architect / Engineer (A/E) qualification information for the General Services Administration / Public Buildings Service (GSA/PBS) A/E short selection for Continental United States (CONUS) and Outside Continental United States (OCONUS). WHAT IS THE SHORT SELECTION PROCESS? The short selection process utilizes the procedures set forth in Revolutionary FAR Overhaul (RFO) Federal Acquisition Regulation (FAR) Subsection 36.202-4 for Architect/Engineer (A/E) projects with an estimated total fee less than the simplified acquisition threshold (currently $350,000; see RFO FAR Part 2.101). The A/E's professional qualifications, the firm's geographic proximity, knowledge of the local area as identified on the A/E's SF330, and supplemental information will be used for the first preliminary screening of firms. For each proposed project, GSA will conduct discussions with at least three (3) firms to consider anticipated concepts and compare alternative methods for furnishing services. Additional information may be requested during discussions if necessary to facilitate the final ranking of firms (i.e.: past performance references, specialized experience, capacity, schedule, etc.). Upon conclusion of discussions, the top three firms will be ranked, and a price proposal will be requested from the highest ranked firm. If a fair and reasonable price cannot be negotiated with the highest ranked firm, a request for a price proposal will be sent to the second ranked firm, and so on until an award can be made at a fair and reasonable price. All acquisitions utilizing the GSA A/E short selection list (database) shall be set-aside for small business concerns unless requirements cannot be met by a small business and the Contracting Officer (CO) obtains a proper waiver. WHAT IS THE SHORT SELECTION PROCESS USED FOR? GSA will use the short selection list to award A/E contracts, valued at less than the simplified acquisition threshold (currently $350,000) in CONUS/OCONUS (NOT Estimated Cost of Construction at Award (ECCA). The firm must have NAICS code 541310 - Architectural Services, with a small business size standard of $12.5 million and/or 541330 - Engineering Services, with a small business size standard of $25.5 million. The firm must clearly notate which states/territories they have active production offices and which states they are licensed by November 1, 2026. Most work will be executed for repair and alteration projects within existing Federal Buildings and U.S. Courthouses. The estimated cost of construction at award (ECCA) for a majority of the project requirements could range from, but are not limited to, above micro-purchase threshold for construction (currently $2,000) to annual prospectus threshold (currently $3.961M) or higher. Fees for design services cannot exceed 6% of the ECCA. For more information about the 6% fee limitation, see FAR 15.404-9(c)(4)(ii) (GSA Class Deviation RFO-2025-15) and 41 U.S.C. 3905(b)(3). GSA manages a nationwide real estate portfolio of approximately 360 million rentable square feet, including preserving more than 500 historic properties nationwide. A broad range of services potentially requested under this short list may include, but are not limited to the following: 1. Core Project Life Cycle Services - These services cover the entire project lifecycle, from initial concept to post-construction closeout. Planning and Pre-Design Feasibility, pre-design, and project development studies Master planning Cost estimating Real estate market analysis Assessment and Investigation Existing conditions surveys, and field investigation Building condition survey evaluation reports (exterior and interior) Environmental investigation, reviews, inventories, and audits Energy audits and studies Design and Documentation Concept design, design development, and construction document development (both architectural and engineering) Interior design, including furniture, fixtures, and equipment (FFE) Building standard documents Construction Support and Closeout Constructability review and evaluation Submittal and shop drawing review Management and inspection (M&I) services during construction and construction inspection Building and system commissioning Post construction contract Services (PCCS); Record and close-out documents 2. Specialized Technical & System Design - Work requested often involves the assessment, repair, and upgrade of existing complex building systems. Mechanical, Electrical, and Plumbing (MEP) Full MEP services, including design of HVAC systems, electrical systems, and lighting Assessment and design for mechanical components (e.g., pumps, fans, air handlers, water distribution systems) and air distribution Design of water and waste water systems, including performance of sanitary inspections Temperature control assessment and design and BAS system assessment and integration Building Structure and Envelope Structural evaluation and design Façade evaluation and remediation design Water infiltration investigation and mitigation design safety, security, and compliance Fire and life safety evaluation and design Rehabs to improve energy efficiency and safety concerns Seismic & blast protection and vertical transportation Code compliance 3. A/E Disciplines and Expertise - A/E firms will need staff with licensed and/or specialized expertise. The following are typical disciplines and categories utilized for GSA projects. Firms do not need to have all of them, but should include the most relevant disciplines for their firm: Core Architectural and Engineering Disciplines Architecture and anterior architecture Mechanical engineering, electrical engineering, structural & civil engineering, and plumbing Historic architecture/preservation Specialized Expertise A qualified/licensed fire protection engineer (NCEES)* Security Space planning & workplace Cost estimating and scheduling Environmental services Building automation Scifs Modernization and Quality Control Building information modeling (BIM) Quality control review and report writing SUBMISSION INSTRUCTIONS To be considered for future Architect-Engineer (A/E) projects, your firm must submit a package demonstrating the applicability and comparability of its portfolio to the types of services outlined above. Please submit your complete package as a single PDF document. This file, which should be no larger than 30MB and no more than thirty (30) pages, must contain all submittal documents. Submit your PDF file as an attachment via the online “GSA A/E Short Selection Submission Form” (Link provided below). Note: Hardcopy submissions received by mail will not be filed or considered. The following information shall be submitted as part of the thirty (30) page limit (LISTED IN REQUIRED ORDER): DO NOT SUBMIT ANY PROPRIETARY INFORMATION 1. A cover letter. The letter should outline the work your firm specializes in and include a brief description of your firm's capabilities specifically related to the project examples stated above. 2. SAM Entity Registration Print Out - 1st and 2nd page only to show active registration in System for Award Management (SAM). Registration is required for award of federal contracts and you must have an active registration in SAM to be considered for project work. Contractors may register in SAM free of charge at https://sam.gov/ under the header labeled Register Your Entity or Get a Unique Entity ID. 3. Standard Form (SF) 330 - Architect-Engineer Qualifications. DO NOT include subconsultants. Please include photos of accomplished work. 4. A separate list of the licensed (or will be licensed by November 1, 2026) professionals and the State/territories of their licensing. Note: This A/E short selection process is for Primes only; consultants are NOT part of this selection process. However, submitted project experience may reference work executed with consultants. Firms should highlight their specific role and explain the work they performed alongside any consultants. Consultants will be requested by project managers during project development. Submittals that don't contain the required documentation will be returned for revision and/or non selection. Organizing your submittal package in the same order enumerated above will facilitate a more efficient review process. Questions related to this announcement shall be referred to aeshortselection@gsa.gov The following information should be easily found in your SF330 Submission: 1. Relevant Project Experience, Demonstrated Comparability and Creative Problem Solving Offerors must provide a minimum of three (3) but no more than five (5) comparable project examples that demonstrate a wide range of repair and alterations work similar in budgets and complexities to those anticipated for contracts. An additional maximum of ten (10) relevant projects completed in the last ten (10) years can be submitted in list form. Please include relevant project photographs. A comparable project is defined as an “A/E engagement involving the repair, alteration, or renovation of existing, occupied facilities, with a focus on both architectural and engineering solutions. Specifically, the project should demonstrate specialized experience in: Building system upgrades (e.g., MEP services or mechanical pump replacement) Historic preservation (especially classical building architecture) Workplace design Furthermore, a comparable project's Estimated Cost of Construction at Award (ECCA) should generally range from $50,000 to an annual prospectus threshold (currently $3.961M). Breadth of Scope: Teams must demonstrate proficiency in seamlessly incorporating architecture and engineering to solve both complex and routine design issues within existing buildings. Specialized Expertise: Highlight specialized experience in the areas most critical to the GSA/PBS mission. This must include work in: Occupied buildings Historic preservation, restoration, and adaptive reuse (special consideration will be given to firms demonstrating experience with classical building architecture and design) Building system upgrades (e.g., MEP services, mechanical pump replacement, HVAC systems, electrical systems, and building controls). Workplace design strategies, interior office redesign, and building standard documents Creative Problem Solving: Firms must demonstrate their ability to be creative and "think outside the box" when developing design solutions, especially given the constraints and challenges of government buildings and existing customer agencies while successfully navigating constraints such as schedule and budget. 2. Team Capacity, Management, and Quality Control The team’s ability to manage projects efficiently, flexibly, and collaboratively is essential for handling the unpredictable nature of GSA task orders. Contract Management and Flexibility: Demonstrate the ability to staff and manage contracts on an as-needed basis, accounting for the unpredictable issuance of work in terms of number, size, importance, and urgency. Consultant and Customer Agency Management: The A/E short selection process is for the Architecture or Engineering Prime only, but the firm must demonstrate its ability to manage its entire team. Firms must demonstrate proven success in establishing good relationships with and effectively managing future sub-consultants, as well as managing scope and communication while working with difficult customer agencies. Quality Assurance: Team must demonstrate formalized processes for quality control (QC) and a commitment to QC standards while consistently designing within the project’s budget and schedule limitations. 3. Key Personnel Education and Qualifications Key Personnel should possess the education, professional qualifications, and specific project experience that provides the best opportunity for the successful completion under this contract. Licensing: Provide a separate list of states in which the firm is licensed or will be licensed by November 1, 2026. Specialized Roles: Key Personnel must demonstrate expertise in disciplines relevant to the services outlined above, such as a Qualified Fire Protection Engineer1, historic preservation, etc. 1A Qualified Fire Protection Engineer is an individual with deep knowledge of fire physics and chemistry, meeting one of the following criteria: (a) An engineer with an undergraduate or graduate degree in fire protection/safety engineering, plus a minimum of four (4) years of relevant work experience; (b) A registered Professional Engineer (P.E. or similar) in Fire Protection Engineering; or (c) A P.E. in a related engineering discipline who is a Professional Member of the Society of Fire Protection Engineers and has passed the NCEES fire protection exam. 4. Past Performance Offerors should include CPARS (Contractor Performance Assessment Reporting System) if they have past government experience as the prime. No more than three (3) most recent relevant records. The CPARS information does not count against the thirty (30) page limit. Impact: If a firm does not have past government experience, they will not be negatively impacted during the selection process. Please register to attend the industry outreach and Q&A meeting on October 16 at 9am PDT or October 22 at 3pm EDT by completing the “A/E Short Selection Process Registration Form CONUS/OCONUS” (Link provided below). Invites will be sent out to all registered attendees approximately one week in advance. Relavant Links GSA A/E Short Selection Process for CONUS/OCONUS - Registration Form https://forms.gle/8kd1qZfZeVMag3HG9 GSA A/E Short Selection Process for CONUS/OCONUS - Q&A https://docs.google.com/document/d/1sGIs_KEnEvP99mxeB2VKBS64IVoUixEZSOLsczc_2As/edit?usp=sharing GSA A/E Short Selection Process for CONUS/OCONUS - Submission Form https://forms.gle/7Rh3FkMkubweUHveA | - | Market Research | 10/31/2026 |
*10/21/2026- Amendment posted of Questions and responses posed by contractors. Submission due date reemains the same. THIS IS A SYNOPSIS OF PROPOSED CONTRACT ACTION. FOLLOW THE INSTRUCTIONS CONTAINED IN THIS NOTICE FOR RESPONDING TO THIS OPPORTUNITY. The Federal Bureau of Prisons (FBOP), Central (CO), anticipates the need for indefinitedelivery indefinite-quantity (IDIQ), firm fixed-price contracts for supplemental architect-engineer (A-E) services, with a one (1) year base requirement and up to four (4) unilaterally exercised option years, with a possibility for a six-month extention as well. The Government is not obligated to exercise any of the option periods. While the Government anticipates multiple awards, no more than four (4) awards are expected. The services will be for various FBOP facilities throughout the United States. See the Statement of Work attachment for description of services. Most projects will take place in a fully occupied, fully operational, secure correctional environment. Most projects require complex design effort and detail along with extensive coordination between design disciplines, the institutions, and Central Office during design and construction. Firms are to perform services as required by the issuance of individual task orders. The guaranteed annual minimum amount of each contract is $10,000.00 and the estimated annual maximum is $10,000,000. The North American Industrial Classification System (NAICS) code applicable to this requirement is 541310 (Architectural Services). Interested firms must be registered in the System for Award Management (SAM) at https://SAM.gov. This requirement will be fulfilled pursuant to the Federal Acquisition Regulation (FAR) 36.6 and the Brooks Act. Pursuant to FAR Deviation 36.201(b), for any firm(s) receiving award under this requirement, no construction contract may be awarded to the firm (including any of its subsidiaries or affiliates) that designs the corresponding project Firms having the capabilities to perform the services described in this announcement are invited to respond by submitting Parts I and II of the Standard Form 330 (Architect Engineer Qualifications) dated not more than 12 months before the date of this synopsis. The current version of the form along with any extra pages/sections may be retrieved from www.gsa.gov/forms (Type in "SF330" in the Form Name or Number block for a full listing of the associated forms. *** Include a cover letter detailing your firms name and main office address (as registered in sam.gov), UEI#, Tax ID# (TIN), CAGE code, and main point of contact for your firm through out the solicitation process (phone and e-mail). Submissions should be on standard 8.5'' x 11" format. No extraneous attachments. Selection criteria will be based on the following evaluation factors in descending order of importance: Specialized Experience and Technical Competence (32%) Capacity to Accomplish the Work in the Required Time (demonstrated ability to complete projects on time) (27%) Acceptability of an Established Team of Key Personnel (23%) Professional Qualifications Necessary for Satisfactory Performance (including licensed engineers and architects licensed Nationwide)(18%) Submit details (maximum of one page per project) of not more than five significant and/or complex renovation projects completed in the past five years (Utilize Section F of the SF-330). Identify the lead designer and address the design approach with salient features for each project. Discuss how the client's program, function, image, mission, economic, schedule and operational objectives were satisfied by the overall design/planning solution. Include tangible evidence where possible such as certificates, awards, peer recognition, etc., demonstrating design excellence. Provide a client reference contact for each project, including name, title, address, phone, fax, and email. Submit resumes of key personnel outlining commitment to projects and qualifications and relevant experience as individuals and as a team. Highlight sustainability features incorporated into the project design (e.g., energy/water efficiency, waste reduction, use of recycled materials). Submit a narrative outline of not more than one page describing the firm's project management planning, coordination, scheduling and production facilities, capabilities, and techniques for both design and construction inspection (Utilize Section H of the SF-330). Submit a narrative outline (maximum one page) with examples describing the firm's ability to evaluate/develop accurate preliminary project budgets, ability to control project costs during design process, ability to design within funding limitations, methods used to coordinate construction documents, work of various engineering disciplines, and provide general production quality control (Utilize Section H of the SF-330). No fax or paper submissions. Submit electronically through the JEFS APP BOX at link below: https://jefs.app.box.com/f/336fbbe977394048827a238f901db3a3 All submissions should be in Adobe format. Title the file in the following format: 15BBNF26R70000006_ Company Name_SF330 Architect Engineer (A/E) Services for Central Office Electronic copies of each submission shall be compatible with the following software products: Adobe Acrobat Reader 11 and Microsoft Office Suite 2016. Narrative portions of the submission shall be in Adobe Acrobat portable document file (pdf) searchable text format. The Submitter shall not embed sound or video (e.g., MPEG) files into the submission files. Electronic files shall be clearly identified for each volume, section, and item. The Submitter must ensure electronic files are virus-free and shall run an anti-virus scan before submission. Submissions by mail or hand carried will not be evaluated. All responses must be received no later than Wednesday, November 4, 2026, 10:00 AM MST. It is the responsibility of the Submitter to confirm receipt by contacting Alex Jackson, Contracting Officer, at a4jackson@bop.gov. Failure to submit all required information may result in rejection. All submissions received after the exact time specified for receipt shall be treated as late submissions and will not be considered except under facts and circumstances allowed by the Federal Acquisition Regulations (FAR). Based on these submissions, a short-list of no more than six (6) firms will be selected for an interview. Firms should be prepared to discuss their submittals and to demonstrate their ability to fulfill the contract requirements. Final selection will be based on SF-330 submissions and interviews. After the SF-330 review and interview process, four (4) selected firms will be invited to submit a formal proposal and must be prepared to negotiate overhead, profit, and hourly rates for anticipated disciplines for use in negotiating firm-fixed-price contract rates as well as firm-fixed-price task orders to be completed under the contract. All contract awards and task orders thereunder are subject to a determination of fair and reasonable pricing. This acquisition is 100 percent small business set-aside. Firms must be registered in SAM.gov as a small business (see FAR provision 52.219-1 in the Representations & Certifications section of the SAM registration. If you have questions about SAM.gov, Government procurements in general, or need assistance in the preparation of your bid/proposal/offer, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org. | - | Pre-Solicitation | 11/04/2026 |
The purpose of this Update is to amended documents to answer questions and update the Performance work statment, solicitation, Total Evaluated Price (TEP) Workbook and Quality assurance plan. As such, The final proposal due date is being updated to Oct 23, 2026 at 1:00PM Central Standard Time. Please review all documents for possible changes. Questions shall be submitted electronically via email with subject line FOUO\\INFO: Solicitation 86614126R00002 Technical Question to CO Travis Sutton at Travis.L.Sutton@hud.gov, CS Christopher Rodriguez Christopher.J.Rodriguez@hud.gov on or before September 29, 2026, at 1:00PM Central Standard Time. Responses to technical questions will be posted as an amendment to this notice. 1. Description of Services: The U.S. Department of Housing and Urban Development (HUD) Office of Multifamily Housing requires contractor support to conduct onsite inspections of new construction and substantial rehabilitation of multifamily housing projects and performing various inspection tasks. These services will provide HUD with the field/site data necessary to make informed decisions regarding the construction/rehabilitation phase of HUD multifamily mortgage insurance underwriting and capital advance programs. 2. Acquisition Strategy: The Government is issuing this Request for Proposal (RFP) 86614126R00002 on SAM.gov with the intent to award a Firm-Fixed-Price (FFP)/Indefinite Delivery Indefinite Quantity (IDIQ) contract, in accordance with Revolutionary FAR Overhaul (RFO) 12/15/ as a small business set aside. This is a notice that this order is a total set-aside for small business concerns. Only proposals submitted by small business concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a small business concern will not be considered for award. 3. Services: The Contractor shall provide services in accordance with the attached Performance Work Statement (PWS), Contract Line-Item Numbers (CLINs), terms and conditions. 4. NAICS Code: 541310 5. Product Service Code (PSC): C219 6. Period of Performance: This contract will consist of one (1) Base Period: 02/01/2027 – 01/31/2032. 7. Contract type: Firm-Fixed-Price (FFP)/Multiple-Award Indefinite Delivery Indefinite Quantity (IDIQ). The government anticipates awarding up to three FFP Multiple-Award IDIQ contract(s) for each of the five (5) regions but reserves the right to combine regions into one contract award if one contractor receives an award for more than one region or expand or reduce the size of a geographic region under an awarded contract. Submitting a proposal for all regions is not required. The government will reject any regional proposal that proposes to only partially perform in the entire region. The resulting contracts will establish the terms, conditions, unit prices, ordering procedures, and maximum ordering limitations applicable to future orders for the required services. The contracts are not intended to constitute a FAR Part 17 multi-year contract or a commitment by the Government to acquire the estimated requirements for each fiscal year of the ordering period. The ordering period may extend across multiple fiscal years. The existence of an ordering period that spans multiple fiscal years does not constitute a Government commitment to acquire services in each fiscal year. Except for the Guaranteed Minimum stated in the contract, the Government does not guarantee that any particular quantity, dollar value, or level of services will be ordered during any fiscal year or during the ordering period. Individual orders will be issued only when the Government has a bona fide requirement and appropriate funding is available. Each order will be separately funded in accordance with applicable fiscal law and the terms of the resulting contract. ORDERING PERIOD The ordering period is established solely to provide the Government with a vehicle for placing orders when requirements arise. The Government does not obligate itself at IDIQ award to purchase the Best Estimated Quantities (BEQs), historical demand quantities, or any other estimated future requirements identified in this Solicitation. The Government may issue no orders or may issue orders in quantities or at times different from the estimates contained in this Solicitation, subject only to the Government's contractual obligations, including the Guaranteed Minimum. The expiration of the ordering period does not constitute a cancellation of a multiyear commitment because the Government is not making a multiyear procurement commitment under this contract. ORDERING Orders shall be issued only by authorized Government personnel in accordance with the Ordering Procedures clause. An order transmitted electronically by an authorized Contracting Officer, including by email when expressly authorized by the Ordering Procedures clause, shall constitute the Government's issuance of the task order. IDIQ Contract Minimum and Maximum Master IDIQ: · Guaranteed minimum: $133,000 · IDIQ maximum ceiling: $37,000,000 For each awarded IDIQ contract: · Guaranteed Minimum Per Region: Northeast Region: $23,000 Southeast Region: $25,000 Southwest Region: $45,000 West Region: $30,000 Midwest Region: $10,000 · Maximum IDIQ Ceiling Per Region: Northeast Region: $6,409,000 Southeast Region: $8,094,000 Southwest Region: $11,818,000 West Region: $8,286,000 Midwest Region: $2,354,000 The guaranteed minimum is the Government's minimum contractual obligation under the IDIQ contract. The maximum IDIQ ceiling is the maximum aggregate quantity/value that may be ordered under the contract, unless otherwise expressly authorized by the contract. Task-Order Limitations The minimum and maximum order limitations stated in FAR 52.216-19, as completed in this solicitation, apply to individual task orders and are separate from the guaranteed minimum and maximum ceiling of the IDIQ contract. 8. Place of performance: LOCATION OF REGIONS AND FEDERAL HOUSING ADMINISTRATION ZONES The contractor must perform the services (i.e., projects) in the following MF Housing (MFH) Region: *** To Be Determined (TBD) at Time of Award *** Northeast Region (by FHA zone): Washington D.C (000) and 13 States: Connecticut (017), Delaware (032), Maine (022), Massachusetts (023), Maryland (052), New Hampshire (024), New Jersey - North (031) and South (035), New York - Buffalo (014) and New York City (012), Pennsylvania - East (034) and West (033), Rhode Island (016), Vermont (026), Virginia (051), and West Virginia (045). Southeast Region (by FHA zone): Puerto Rico/US Virgin Islands (056) and 8 States: Alabama (062), Florida - North (063), Central (067), and South (066), Georgia (061), Kentucky (083), Mississippi (065), North Carolina (053), South Carolina (054), and Tennessee - Knoxville (087), Memphis (081), Nashville (086). Midwest Region (by FHA zone): 6 States: Illinois - Chicago (071) and Springfield (072), Indiana (073), Michigan - Detroit (044), Grand Rapids (047), and Flint (048), Minnesota (092), Ohio - Cleveland (042), Columbus (043) and Cincinnati (046), and Wisconsin (075). Southwest Region (by FHA zone): 9 States: Arkansas (082), Iowa (074), Kansas (102), Louisiana (064), Missouri - East (085) and West (084), Nebraska (103), New Mexico (116), Oklahoma - East (118) and West (117), and Texas - Fort Worth (113), Houston (114), and San Antonio (115). West Region (by FHA zone): 14 States: Alaska (176), Arizona (123), California - Los Angeles (122), Riverside (143), San Diego (129), San Francisco (121) and Northern California (136), Colorado (101), Hawaii (140), Idaho (124), Montana (093), Nevada (125), North Dakota (094), Oregon (126), South Dakota (091), Utah (105), Washington - Spokane (171) and Seattle (127), and Wyoming (109). 9. On-ramp/off-ramp provisions a. ON-RAMP PROCEDURES The Government may conduct an on-ramp during the ordering period when the Contracting Officer determines that additional contract holders are necessary or advantageous to meet Government requirements, increase competition, increase the availability of qualified small businesses, or otherwise support the Government's mission. Any on-ramp competition will be conducted pursuant to a new solicitation or other lawful competitive procedure and will use evaluation criteria and material contract terms consistent with the requirements established for the existing contract vehicle, to the maximum extent permitted by applicable law and regulation. An on-ramp award will not extend the ordering period of the existing contract. The Government does not guarantee that an on-ramp will be conducted or that any additional contract will be awarded. b. OFF-RAMP PROCEDURES The Government may remove a Contractor from the active ordering pool or decline to continue the Contractor's participation in a subsequent ordering period when authorized by the contract and applicable law. Potential grounds for off-ramping may include, but are not limited to: Failure to submit a proposal in response to multiple task-order solicitations when the Contractor was eligible and required to participate; Failure to receive an order during a specified evaluation period, when the solicitation or contract expressly establishes such criterion; Failure to satisfy material contract performance requirements; Repeated failure to satisfy required deliverables or quality standards; Failure to maintain required eligibility or representations; and Other objective criteria expressly identified in the contract. In evaluating whether off-ramping is appropriate, the Government will give priority consideration to relevant past performance on earlier orders under the contract, consistent with applicable law and the evaluation methodology stated in the contract. Off-ramping will not be based solely on a Contractor's failure to receive an order unless the solicitation expressly identifies such failure as an off-ramp criterion and the criterion is applied consistently. c. TEAMING ARRANGEMENTS After award, a Contractor may not add, remove, or substitute team members in a manner that materially changes the basis on which the Government evaluated the Contractor's proposal unless such change is permitted by the contract and applicable law and is approved by the Contracting Officer. Nothing in this provision authorizes a Contractor to modify its post-award teaming arrangement in a manner that circumvents the competition requirements applicable to the contract. 10. Questions: Questions shall be submitted electronically via email with subject line FOUO\\INFO: Solicitation 86614126R00002 Technical Question to CO Travis Sutton at Travis.L.Sutton@hud.gov, CS Christopher Rodriguez Christopher.J.Rodriguez@hud.gov on or before September 29, 2026, at 1:00PM Central Standard Time. Responses to technical questions will be posted as an amendment to this notice. 11. Proposal Submission: Proposals shall be submitted electronically via email with subject line FOUO\\INFO: Solicitation 86614126R00002 – (Insert Company Name and Region). to CO Travis Sutton at Travis.L.Sutton@hud.gov, Christopher Rodriguez at Christopher.J.Rodriguez@hud.gov on or before the closing date of October 23, 2026, at 1:00PM Central Standard Time. Email Submission Size Limitation: Email messages and attachments submitted to HUD shall comply with HUD's maximum email message/file size limitation of 28 megabytes (MBs). If a proposal submission exceeds this limitation, the Offeror shall use additional emails. Offerors are responsible for ensuring timely receipt of their complete proposal in accordance with the submission instructions. Alternate proposals: The solicitation does not authorize offerors to propose alternative terms and conditions or line items. Such alternate proposals will be considered non-compliant / non-conforming, technically unacceptable, and ineligible for award. Alternate proposals will not be evaluated. Alternate proposals will be eliminated and not further evaluated. 12. HUD Contacts: Contracting Officer: Travis Sutton Travis.L.Sutton@hud.gov Contract Specialist: Christopher Rodriguez at Christopher.J.Rodriguez@hud.gov | - | Solicitation | 10/23/2026 |
Technical and Management Services of Government Furnished Equipment (GFE) and Government Furnished Information (GFI) in support of the PAE Maritime Government Equipment Management (GEM) Program Office in support of Portfolio Acquisition Executive (PAE) Maritime and Director of International Support, Common Systems, and Training (together called PAE Maritime). This support encompasses acquisition and technical analysis and recommendations for technical logistical and new construction management as it relates to GFI/GFE for various ship classes. This is a total Small Business Set-Aside. This solicitation is open to Seaport-NxG MAC holders (Prime/Subcontractors) only. | - | Solicitation | 12/08/2026 |
THIS IS A DRAFT SEAPORT-NxG SOLICITATION TO REQUEST INPUT FROM INDUSTRY - THE GOVERNMENT MAY NOT RESPOND TO ALL QUESTIONS POSTED BUT WILL CONSIDER EACH FOR FINAL SOLICITATION. This Advance Notice/Draft is issued by Naval Surface Warfare Center (NSWC), Crane Division Contracting Department, Crane, IN on and sets forth the requirements for Direct Reporting Portfolio Manager for Robotic and Autonomous Systems (DRPM RAS) RAS 1.0 Mission Enablers (ME) and RAS 2.0 Mine Countermeasures (MCM) Professional Support Services. This requirement will be solicited as a 100% Small Business Set-Aside among current SeaPort-NxG MAC holders. Only questions from current SeaPort-NxG MAC Holders will be considered. All questions must be received by the identified Response date and time prior to issuing any official solicitation. The purpose of update 0001 is to re-post the corrected attachment, Attachment 08 - Personnel Qualifications. The posted draft solicitation included Attachment 08 - Personnel Qualifications that contained information in hidden spreadsheet tabs. Because the information was internal to the Government and not relevant to the requirements of the draft solicitation, the attachment was subsequently removed to avoid further confusion. Interested parties are advised to not consider, utilize, or rely upon the previously posted Attachment 08 - Personnel Qualifications because the document contains incorrect, irrelevant, and/or unreliable information. | - | Pre-Solicitation | 10/30/2026 |
Additional Details
Solicitation Number
47PF0020R0058
Archive Date
Feb 15, 2021
Office Address
CHICAGO, IL, 60604