GovChime
Notice ID: ccff6d16c42243fb89bd501865284ea9Solicitation

Architect Engineer Services (Design Excellence) - Frank E. Moss Seismic Upgrade, Backfill and Renovation

Archived on May 6, 2020. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM UTC−07:00
Posted
April 20, 2020
Notice type
Solicitation
NAICS
541310: Architectural Services
Agency
General Services AdministrationPUBLIC BUILDINGS SERVICE

Notice details

Office
PBS R8 ACQUISITION MANAGEMENT DIVISION
Place of performance
Salt Lake City, 84101
Last updated
Sep 25, 2026

Identifiers

Solicitation number
47PJ0020R0035
Notice ID
ccff6d16c42243fb89bd501865284ea9

Description

CONSULTING AND SUBCONTRACTING OPPORTUNITIES April 20, 2020 - Potential consulting or subcontract opportunties are available with each of the shortlisted A/E Firms (in alphabetical order below). Interested and qualified small businesses should submit their relevant qualifications via email directly to the shortlisted A/E Firms to express interest (note: the Government will not facilitate (other than this posting) any of the consulting and/or subcontracting opportunities). Please use the subjet line "Moss Qualifications" in your email submission to each of the A/E Firms. BEYER BLINDER BELLE AND THORNTON TOMASSETTI Point of Contact: Gretchen Pfaehler, AIA, Partner, gpfaehler@bbbarch.com civil survey and utility engineers landscape architecture audio visual engineering hazmat/industrial hygiene lighting design vertical transportation food service parking partnering session facilitators DLR GROUP AND KPFF Point of Contact: Edward Bledowski, AIA, Principal in Charge, ebledowski@dlrgroup.com local mechanical/pPlumbing engineering (100 mile radius of the Frank E. Moss Courthouse) local electrical engineering (100 mile radius of the Frank E. Moss Courthouse) low voltage lighting design IT telecommunications data security design architectural materials conservator fine art conservator civil engineering surveyor geotechnical engineering landscape architect fire detection and suppression life safety vertical transportation wayfinding and signage placemaking cost estimating cost estimating QA/QC HOK + TRIVERS Point of Contact: Maggie Stamm, maggie.stamm@hok.com mechanical engineering electrical engineering plumbing engineering acoustic engineering low voltage cost consulting security civil engineering environmental consultant telecommunications protective design/blast engineering waterproofing architecture interior design historic preservation _______________________________________________________________________________ SHORTLIST ANNOUNCEMENT April 9, 2020 - The list of shortlisted A/E firms (including lead designers) for Architect Engineer Services for the Frank E. Moss Seismic Upgrade, Backfill and Renovation project is provided as follows: In alphabetical order, the following firms are shortlisted for A/E services the Frank E. Moss US Courthouse Seismic Upgrade, Backfill, and Building Renovation Project, solicitation number 47PJ0020R0035: Firm Name(s): Beyer Blinder Belle and Thornton Tomasetti, Inc. Lead Designer(s): Hany Hassan and Mark Tamaro Address: Beyer Blinder Belle 3307 M Street, NW, Suite 301 Washington, DC 20007 Thornton Tomasetti, Inc. 2001 K Street, NW, Suite 600 North Washington, DC 20006 Firm Name(s): DLR Group and kpff Lead Designer(s): Paul Westlake, Jr., Matthew Jennings, Mark Tobin Address: DLR Group 1401 Lawrence St., Suite 1000 Denver, CO 80202 KPFF 111 SW Fifth Avenue Suite 2600 Portland, OR 97204 Firm Name(s): HOK + Trivers Lead Designer(s): Tim Gaidis, Benjamin Mohr, and Amy Gilbertson Address: HOK 10 S. Broadway, Suite 200 St. Louis, MO 63102 Trivers 100 N. Broadway, Suite 1800 St. Louis, MO 63102 As stated in the initial solicitation, the GSA intended to conduct an A/E networking session. During this session shortlisted firms would have presented potential subcontracting/consulting opportunities to small business firms and small business firms would have presented their qualifications to shortlisted firms. The intent of this networking session was to assist the selected A/E in meeting small business subcontracting goals and to assist small business with identifying potential subcontract opportunities. In light of recent events, this physical networking session will no longer be held in person. Rather, shortlisted A/E Firms will provide the Contracting Officer with a written narrative clearly identifying potential subcontract/consultant opportunities. These written narratives will be posted to the Beta.Sam.gov website on April 20, 2020. Small businesses may contact the shortlisted firms directly to discuss their qualifications. _______________________________________________________________________________ January 2, 2020: The primary objectives of this project are to improve the overall seismic performance of the building for the safety of its occupants in accordance with the PBS P100; back-fill the Frank E. Moss US Courthouse with federal agencies some of which are currently housed in private market leases within the Salt Lake City metropolitan area; preserve and rehabilitate significant historic spaces; and invest in building systems that are at the end of their useful life, improving the overall performance of the building and tenant comfort. General Information: NAICS: 541310, Architectural Services NAICS Size Standard: $8 million This single notice satisfies both the publicizing and response requirements of FAR 5.203(a) and FAR 5.203(d) Architect Engineer Budget: $7.5 - $9 million Estimated Cost of Construction: $85 million Questions: All questions related to solicitation 47PJ0020R0035 shall be submitted, in writing via email, to the Contracting Officer no later than 3:00 PM Standard Time, January 23, 2020. Questions received after this cutoff may not receive a response.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:47PJ0020R0035
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. 9×
    SolicitationCurrentJan 2, 2020

    Architect Engineer Services (Design Excellence) - Frank E. Moss Seismic Upgrade, Backfill and Renovation

    Notice ccff6d16c42243fb89bd501865284ea9 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Description The purpose of this announcement is to request new Architect / Engineer (A/E) qualification information for the General Services Administration / Public Buildings Service (GSA/PBS) A/E short selection for Continental United States (CONUS) and Outside Continental United States (OCONUS). WHAT IS THE SHORT SELECTION PROCESS? The short selection process utilizes the procedures set forth in Revolutionary FAR Overhaul (RFO) Federal Acquisition Regulation (FAR) Subsection 36.202-4 for Architect/Engineer (A/E) projects with an estimated total fee less than the simplified acquisition threshold (currently $350,000; see RFO FAR Part 2.101). The A/E's professional qualifications, the firm's geographic proximity, knowledge of the local area as identified on the A/E's SF330, and supplemental information will be used for the first preliminary screening of firms. For each proposed project, GSA will conduct discussions with at least three (3) firms to consider anticipated concepts and compare alternative methods for furnishing services. Additional information may be requested during discussions if necessary to facilitate the final ranking of firms (i.e.: past performance references, specialized experience, capacity, schedule, etc.). Upon conclusion of discussions, the top three firms will be ranked, and a price proposal will be requested from the highest ranked firm. If a fair and reasonable price cannot be negotiated with the highest ranked firm, a request for a price proposal will be sent to the second ranked firm, and so on until an award can be made at a fair and reasonable price. All acquisitions utilizing the GSA A/E short selection list (database) shall be set-aside for small business concerns unless requirements cannot be met by a small business and the Contracting Officer (CO) obtains a proper waiver. WHAT IS THE SHORT SELECTION PROCESS USED FOR? GSA will use the short selection list to award A/E contracts, valued at less than the simplified acquisition threshold (currently $350,000) in CONUS/OCONUS (NOT Estimated Cost of Construction at Award (ECCA). The firm must have NAICS code 541310 - Architectural Services, with a small business size standard of $12.5 million and/or 541330 - Engineering Services, with a small business size standard of $25.5 million. The firm must clearly notate which states/territories they have active production offices and which states they are licensed by November 1, 2026. Most work will be executed for repair and alteration projects within existing Federal Buildings and U.S. Courthouses. The estimated cost of construction at award (ECCA) for a majority of the project requirements could range from, but are not limited to, above micro-purchase threshold for construction (currently $2,000) to annual prospectus threshold (currently $3.961M) or higher. Fees for design services cannot exceed 6% of the ECCA. For more information about the 6% fee limitation, see FAR 15.404-9(c)(4)(ii) (GSA Class Deviation RFO-2025-15) and 41 U.S.C. 3905(b)(3). GSA manages a nationwide real estate portfolio of approximately 360 million rentable square feet, including preserving more than 500 historic properties nationwide. A broad range of services potentially requested under this short list may include, but are not limited to the following: 1. Core Project Life Cycle Services - These services cover the entire project lifecycle, from initial concept to post-construction closeout. Planning and Pre-Design Feasibility, pre-design, and project development studies Master planning Cost estimating Real estate market analysis Assessment and Investigation Existing conditions surveys, and field investigation Building condition survey evaluation reports (exterior and interior) Environmental investigation, reviews, inventories, and audits Energy audits and studies Design and Documentation Concept design, design development, and construction document development (both architectural and engineering) Interior design, including furniture, fixtures, and equipment (FFE) Building standard documents Construction Support and Closeout Constructability review and evaluation Submittal and shop drawing review Management and inspection (M&I) services during construction and construction inspection Building and system commissioning Post construction contract Services (PCCS); Record and close-out documents 2. Specialized Technical & System Design - Work requested often involves the assessment, repair, and upgrade of existing complex building systems. Mechanical, Electrical, and Plumbing (MEP) Full MEP services, including design of HVAC systems, electrical systems, and lighting Assessment and design for mechanical components (e.g., pumps, fans, air handlers, water distribution systems) and air distribution Design of water and waste water systems, including performance of sanitary inspections Temperature control assessment and design and BAS system assessment and integration Building Structure and Envelope Structural evaluation and design Façade evaluation and remediation design Water infiltration investigation and mitigation design safety, security, and compliance Fire and life safety evaluation and design Rehabs to improve energy efficiency and safety concerns Seismic & blast protection and vertical transportation Code compliance 3. A/E Disciplines and Expertise - A/E firms will need staff with licensed and/or specialized expertise. The following are typical disciplines and categories utilized for GSA projects. Firms do not need to have all of them, but should include the most relevant disciplines for their firm: Core Architectural and Engineering Disciplines Architecture and anterior architecture Mechanical engineering, electrical engineering, structural & civil engineering, and plumbing Historic architecture/preservation Specialized Expertise A qualified/licensed fire protection engineer (NCEES)* Security Space planning & workplace Cost estimating and scheduling Environmental services Building automation Scifs Modernization and Quality Control Building information modeling (BIM) Quality control review and report writing SUBMISSION INSTRUCTIONS To be considered for future Architect-Engineer (A/E) projects, your firm must submit a package demonstrating the applicability and comparability of its portfolio to the types of services outlined above. Please submit your complete package as a single PDF document. This file, which should be no larger than 30MB and no more than thirty (30) pages, must contain all submittal documents. Submit your PDF file as an attachment via the online “GSA A/E Short Selection Submission Form” (Link provided below). Note: Hardcopy submissions received by mail will not be filed or considered. The following information shall be submitted as part of the thirty (30) page limit (LISTED IN REQUIRED ORDER): DO NOT SUBMIT ANY PROPRIETARY INFORMATION 1. A cover letter. The letter should outline the work your firm specializes in and include a brief description of your firm's capabilities specifically related to the project examples stated above. 2. SAM Entity Registration Print Out - 1st and 2nd page only to show active registration in System for Award Management (SAM). Registration is required for award of federal contracts and you must have an active registration in SAM to be considered for project work. Contractors may register in SAM free of charge at https://sam.gov/ under the header labeled Register Your Entity or Get a Unique Entity ID. 3. Standard Form (SF) 330 - Architect-Engineer Qualifications. DO NOT include subconsultants. Please include photos of accomplished work. 4. A separate list of the licensed (or will be licensed by November 1, 2026) professionals and the State/territories of their licensing. Note: This A/E short selection process is for Primes only; consultants are NOT part of this selection process. However, submitted project experience may reference work executed with consultants. Firms should highlight their specific role and explain the work they performed alongside any consultants. Consultants will be requested by project managers during project development. Submittals that don't contain the required documentation will be returned for revision and/or non selection. Organizing your submittal package in the same order enumerated above will facilitate a more efficient review process. Questions related to this announcement shall be referred to aeshortselection@gsa.gov The following information should be easily found in your SF330 Submission: 1. Relevant Project Experience, Demonstrated Comparability and Creative Problem Solving Offerors must provide a minimum of three (3) but no more than five (5) comparable project examples that demonstrate a wide range of repair and alterations work similar in budgets and complexities to those anticipated for contracts. An additional maximum of ten (10) relevant projects completed in the last ten (10) years can be submitted in list form. Please include relevant project photographs. A comparable project is defined as an “A/E engagement involving the repair, alteration, or renovation of existing, occupied facilities, with a focus on both architectural and engineering solutions. Specifically, the project should demonstrate specialized experience in: Building system upgrades (e.g., MEP services or mechanical pump replacement) Historic preservation (especially classical building architecture) Workplace design Furthermore, a comparable project's Estimated Cost of Construction at Award (ECCA) should generally range from $50,000 to an annual prospectus threshold (currently $3.961M). Breadth of Scope: Teams must demonstrate proficiency in seamlessly incorporating architecture and engineering to solve both complex and routine design issues within existing buildings. Specialized Expertise: Highlight specialized experience in the areas most critical to the GSA/PBS mission. This must include work in: Occupied buildings Historic preservation, restoration, and adaptive reuse (special consideration will be given to firms demonstrating experience with classical building architecture and design) Building system upgrades (e.g., MEP services, mechanical pump replacement, HVAC systems, electrical systems, and building controls). Workplace design strategies, interior office redesign, and building standard documents Creative Problem Solving: Firms must demonstrate their ability to be creative and "think outside the box" when developing design solutions, especially given the constraints and challenges of government buildings and existing customer agencies while successfully navigating constraints such as schedule and budget. 2. Team Capacity, Management, and Quality Control The team’s ability to manage projects efficiently, flexibly, and collaboratively is essential for handling the unpredictable nature of GSA task orders. Contract Management and Flexibility: Demonstrate the ability to staff and manage contracts on an as-needed basis, accounting for the unpredictable issuance of work in terms of number, size, importance, and urgency. Consultant and Customer Agency Management: The A/E short selection process is for the Architecture or Engineering Prime only, but the firm must demonstrate its ability to manage its entire team. Firms must demonstrate proven success in establishing good relationships with and effectively managing future sub-consultants, as well as managing scope and communication while working with difficult customer agencies. Quality Assurance: Team must demonstrate formalized processes for quality control (QC) and a commitment to QC standards while consistently designing within the project’s budget and schedule limitations. 3. Key Personnel Education and Qualifications Key Personnel should possess the education, professional qualifications, and specific project experience that provides the best opportunity for the successful completion under this contract. Licensing: Provide a separate list of states in which the firm is licensed or will be licensed by November 1, 2026. Specialized Roles: Key Personnel must demonstrate expertise in disciplines relevant to the services outlined above, such as a Qualified Fire Protection Engineer1, historic preservation, etc. 1A Qualified Fire Protection Engineer is an individual with deep knowledge of fire physics and chemistry, meeting one of the following criteria: (a) An engineer with an undergraduate or graduate degree in fire protection/safety engineering, plus a minimum of four (4) years of relevant work experience; (b) A registered Professional Engineer (P.E. or similar) in Fire Protection Engineering; or (c) A P.E. in a related engineering discipline who is a Professional Member of the Society of Fire Protection Engineers and has passed the NCEES fire protection exam. 4. Past Performance Offerors should include CPARS (Contractor Performance Assessment Reporting System) if they have past government experience as the prime. No more than three (3) most recent relevant records. The CPARS information does not count against the thirty (30) page limit. Impact: If a firm does not have past government experience, they will not be negatively impacted during the selection process. Please register to attend the industry outreach and Q&A meeting on October 16 at 9am PDT or October 22 at 3pm EDT by completing the “A/E Short Selection Process Registration Form CONUS/OCONUS” (Link provided below). Invites will be sent out to all registered attendees approximately one week in advance. Relavant Links GSA A/E Short Selection Process for CONUS/OCONUS - Registration Form https://forms.gle/8kd1qZfZeVMag3HG9 GSA A/E Short Selection Process for CONUS/OCONUS - Q&A https://docs.google.com/document/d/1sGIs_KEnEvP99mxeB2VKBS64IVoUixEZSOLsczc_2As/edit?usp=sharing GSA A/E Short Selection Process for CONUS/OCONUS - Submission Form https://forms.gle/7Rh3FkMkubweUHveA
-Market Research10/31/2026
This is a Sources Sought Notice only. This notice does not constitute a Request for Qualifications (RFQ), Request for Proposals (RFP), or Invitation for Bids (IFB), nor does it represent a commitment by the Government to issue a solicitation or award a contract. This Sources Sought Synopsis is issued solely for market research and planning purposes to determine the availability and adequacy of potential sources. It is not a Request for Proposals or Quotes and imposes no obligation on the Government to acquire any goods or services. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The Government reserves the right to determine the appropriate acquisition approach based on the results of this market research. Responders should not anticipate feedback regarding their submissions. The Government will not pay for any costs incurred in responding to this Synopsis; all costs associated with responding are solely at the responding party's expense. The information provided herein is subject to change and is non-binding on the Government. The purpose of this notice is to conduct market research to identify potential and qualified sources, assess industry capabilities, and establish effective acquisition strategies, including potential small business set-aside opportunities. No reimbursement will be provided for any costs associated with submitting information in response to this announcement or any follow-up information requests. Overview The General Services Administration (GSA), Public Buildings Service (PBS), is conducting market research to establish Multiple-Award Indefinite-Delivery, Indefinite-Quantity (IDIQ) contracts for comprehensive, multidisciplinary Architect-Engineer (A/E) services. These contracts are intended to provide integrated, sustainable, and adaptive design solutions across federally owned and leased real property nationwide. The Government anticipates awarding multiple contracts with multi-year ordering periods (5 year base with one 5 year option) to support GSA zones and client agencies across the United States and its territories. Expected typical project size is to be above the simplified acquisition threshold of $350,000. The potential place of performance for services rendered under this contract is on an as-needed basis for federal projects anywhere in the United States and its territories. This will require the capability to travel to GSA and other Government agency office locations nationwide. In some instances, performance of services is expected to require the capability for contractors to dispatch personnel to multiple locations simultaneously. The applicable North American Industry Classification System (NAICS) code for this requirement is 541310 (Architectural Services) & 541330 (Engineering Services), which has a small business size standard of $12.5 million and $25.5 million respectively. Scope of Services Services provided under the resulting IDIQ contracts will encompass a comprehensive range of professional A/E design and engineering disciplines. Scopes of work for individual task orders may include, but are not limited to, the following: 1. Core Project Life Cycle Services - These services cover the entire project lifecycle, from initial concept to post-construction closeout. Planning and Pre-Design Feasibility, pre-design, and project development studies Master planning Cost Estimating Real Estate Market Analysis Assessment and Investigation Existing conditions surveys, and field investigation Building condition survey evaluation reports (exterior and interior) Environmental investigation, reviews, inventories, and audits Energy audits and studies Design and Documentation Concept design, Design development, and Construction document development (both architectural and engineering) Interior design, including Furniture, Fixtures, and Equipment (FFE) Building standard documents Construction Support and Closeout Constructability review and evaluation Submittal and shop drawing review Management and inspection (M&I) services during construction and Construction inspection Building and system commissioning Post Construction Contract Services (PCCS); Record and close-out documents 2. Specialized Technical & System Design - Work requested often involves the assessment, repair, and upgrade of existing complex building systems. Mechanical, Electrical, and Plumbing (MEP) Full MEP services, including design of HVAC systems and electrical systems and lighting Assessment and design for mechanical components (e.g., pumps, fans, air handlers, water distribution systems) and air distribution Design of water and waste water systems, including performance of sanitary inspections Temperature control assessment and design and BAS system assessment and integration Building Structure and Envelope Structural evaluation and design Façade evaluation and remediation design Water infiltration investigation and mitigation design Safety, Security, and Compliance Fire and Life Safety evaluation and design Rehabs to improve energy efficiency and safety concerns Seismic & Blast protection and Vertical Transportation Code Compliance 3. Required AE Disciplines and Expertise - AE firms will need staff with licensed and/or specialized expertise in the following disciplines: Core Architectural and Engineering Disciplines Architecture and Interior Architecture Mechanical Engineering, Electrical Engineering, Structural & Civil Engineering, and Plumbing Historic Preservation Specialized Expertise A Qualified/Licensed Fire Protection Engineer (NCEES)* Security Space Planning & Workplace Cost Estimating and Scheduling Environmental Services Modernization and Quality Control Building Information Modeling (BIM) Quality control review and Report writing Submission Requirements Interested firms are invited to submit a written Capability Statement. Submissions must not exceed five (5) pages in length and must address the following elements: A. Company Profile Official company name, street address, telephone number, and primary website URL. Unique Entity Identifier (UEI) and Commercial and Government Entity (CAGE) Code. Office location(s) and primary design production facilities. Business size status under NAICS 541310 or 541330 (Large Business or Small Business). Applicable SBA socio-economic certifications (e.g., 8(a), HUBZone, Service-Disabled Veteran-Owned Small Business [SDVOSB], Woman-Owned Small Business [WOSB], or Economically Disadvantaged WOSB [EDWOSB]). B. Relevant Experience Summarize three to five (3–5) relevant projects completed within the past ten (10) years. Demonstrate experience in projects of similar scale, scope, and complexity, such as federal workplace design, major repairs and alterations, or complex building systems. Include project title, customer/agency point of contact, contract value, role (Prime or Subcontractor), and a brief narrative of the work performed. C. Nationwide Capacity Demonstrate organizational capacity to manage and execute multiple task orders simultaneously across diverse geographic locations nationwide. Describe key disciplines maintained in-house versus those typically fulfilled through subcontractor or joint venture arrangements. Submission Instructions Responses must be submitted electronically via email to the primary procurement contacts listed below: Submission Deadline: Primary Contact: Point of Contact Email: Subject Line Format: Sources Sought Response - National A/E IDIQ - [Firm Name] Hard copies, telephonic inquiries, and late submissions will not be reviewed or acknowledged. All information provided in response to this notice will be used strictly for market research and acquisition planning purposes. This notice encourages participation from qualified small business concerns, including socio-economic program participants, to assist GSA in evaluating the feasibility of small business set-asides for this procurement. All prospective offerors are responsible for monitoring SAM.gov for updates, future notices, or potential solicitations related to this requirement.
-Market Research11/13/2026
Final QUESTIN/ANSWERS Spreadsheet uploaded. _____________________________________________________________________________ QUESTIONS/ANSWERS POSTED. Solicitation extended to 10 Nov 2026, 10am(CT). ______________________________________________________________________________ Amendment 0001 - 1st paragraph page 1, changed quantity of 400 to 100 and 25 to 10. _______________________________________________________________________________ Requirement - Helium Inspection Services. Read all attachments. Please make certain Cage Code is current.
-Solicitation11/10/2026
REQUEST FOR INFORMATION TURNKEY INDUSTRIAL PLANT SYSTEMS & SUPPORT The Ogden Air Logistics Complex (OO-ALC) at Hill AFB, UT seeks information and feedback from our industry partners for a potential upcoming requirement. Please answer the questions listed at the bottom of this document with as much detail as possible. Additional feedback, insights and recommendations are welcomed. Please send responses to both of the email addresses listed below: Shawna Dudis at shawna.dudis@us.af.mil Travis Dean at travis.dean@us.af.mil Responses are information only and shall not be used as an offer or proposal. Overview: This anticipated requirement will (1) facilitate support for multiple groups within OO-ALC that have an ongoing need for integrated solutions of turnkey Depot Industrial Plant Equipment (DIPE) systems and subsystems and (2) provide engineering services that enable the day-to-day repair, modification and maintenance missions of various OO-ALC groups. The expectation is that the successful awardee must be able to support the DIPE solutions and day-to-day engineering services for multiple groups. The Government is currently contemplating a competition that initial market assessments indicate will result in a small business set-aside. The applicable NAICS Code is expected to be 541330 – Engineering Services. Please see the attached document for full details.
-Market Research11/24/2026
84 Radar Evaluation Squadron (RADES) Support - See attached draft PWS
-Market Research10/27/2026

Additional Details

Solicitation Number

47PJ0020R0035

Archive Date

May 6, 2020

Office Address

LAKEWOOD, CO, 80225