GovChime
Notice ID: 496c9ac51da14b8aabc2d7e7211f9a04Sources SoughtArchived

Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services

Archived on June 26, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM EDT
Posted
June 8, 2026
Notice type
Sources Sought
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
333992: Welding and Soldering Equipment Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-APG
Place of performance
Aberdeen Proving Ground, Maryland, 21005
Last updated
Oct 29, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
PANAPG-26-P-0000_046078
Notice ID
496c9ac51da14b8aabc2d7e7211f9a04

Description

THIS IS A REQUEST FOR INFORMATION (RFI) ONLY, which is being issued in accordance with (IAW) Federal Acquisition Regulation FAR Part 10 as part of market research. This is not a solicitation/request for proposal and no contract shall be awarded from this synopsis. There is no solicitation package available at this time. All interested parties should send responses and any comments/questions to Mr. Noah Lane, email: noah.r.lane.civ@army.mil.  All responses must be received no later than 2:00 P.M. EST on 11 June 2026. All questions and comments must be in writing; no telephone calls will be accepted. The Government will not pay for any information received in response to this request, nor will the Government compensate any respondent for any costs incurred in developing the information provided to the Government. Capability Statements and other information received in response to this RFI will likely be used to make an small business set aside award. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (5)

  • Aberdeen Test Center Machine Shop RFI (1).pdf

    99 KBAdded in Sources Sought version 3Posted
    Download
  • 2. QASP - Welding, Machining, Painting, and Fabrication Mission Support Contract - April2026.pdf

    300 KBAdded in Sources Sought version 1Posted
    Download
  • 1 Performance Work Statement V1..docx

    155 KBAdded in Sources Sought version 1Posted
    Download
  • Labor Categories and Qualifications April2026.pdf

    233 KBAdded in Sources Sought version 1Posted
    Download
  • CDRL INFO.pdf

    109 KBAdded in Sources Sought version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Sources SoughtArchived

    Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services

    Notice 6848e622e78f4d909e63684b6df465af on SAM.gov

  2. 3
    Version 3Sources SoughtArchivedCurrent

    Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services

    Notice 496c9ac51da14b8aabc2d7e7211f9a04 on SAM.gov

  3. 4
    Version 4Presolicitation

    Type changed from Sources Sought to Presolicitation

    Draft Solicitation - Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services

    Notice 8d94b03369074557adf61e58617d6d7e on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This Combined Synopsis/Solicitation, Solicitation Number W91CRB-27-R-A002, is issued by the Army Contracting Command – Aberdeen Proving Ground (ACC-APG) for commercial services. The North American Industry Classification System (NAICS) code is 333992 (Welding and Soldering Equipment Manufacturing) with a small business size standard of 1,250 employees. This acquisition is a 100 percent Small Business Set-Aside under Product Service Code (PSC) K034. The resulting contract will be a single-award hybrid Time-and-Materials (T&M) and Firm-Fixed-Price (FFP) Indefinite Delivery/Indefinite Quantity (IDIQ) contract with a minimum guarantee of $100.00. Place of performance is the U.S. Army Aberdeen Test Center (ATC), Aberdeen Proving Ground, Maryland. The ordering period is 9 December 2026 through 8 December 2031, inclusive of a 45-day transition period. Source selection will be conducted using the Lowest Price Technically Acceptable (LPTA) process evaluating Technical, Past Performance, and Price factors on an Acceptable/Unacceptable basis. This requirement is for non-personal commercial services to provide welding, machining, painting, and fabrication support to the ATC Welding Fabrication, Machining, and Paint Shops. The contractor shall furnish the personnel, management, supervision, and resources (except Government-Furnished Property) necessary to support the Automotive, Command Staff, Live Fire, Virtual Test & Electronics, and Warfighter cores on a performance-based basis. Full technical requirements, labor category qualifications, Level of Effort estimates, Quality Assurance Surveillance Plan, Government-Furnished Property listing, and Contract Data Requirements Lists are contained in the attached solicitation package and are incorporated by reference. The posting and issue date of this Combined Synopsis/Solicitation is 2 November 2026. Questions are due no later than 9 September 2026 at 3:00 PM Eastern Standard Time. Proposals are due no later than 2:00 PM Eastern Time on 16 November 2026. Proposals shall remain valid for a period of at least 180 days from the closing date. Proposals must be submitted electronically to both Noah Lane, Contract Specialist, at noah.r.lane.civ@army.mil and Todd M. Strasavich, Contracting Officer, at todd.m.strasavich.civ@army.mil. Late proposals may not be considered. Offerors shall submit four volumes (Technical limited to 25 pages, Past Performance limited to 15 pages, Price, and Certifications/Representations). Complete submission instructions are provided in the attached solicitation package. The full solicitation package, consisting of the Performance Work Statement, Quality Assurance Surveillance Plan, Government-Furnished Property Listing, Labor Categories and Qualifications, Level of Effort Spreadsheet, and CDRL Exhibits AA through AC, is attached and incorporated by reference. Questions shall be submitted in writing to the points of contact identified above. Any amendments will be posted to SAM.gov. Offerors are responsible for monitoring SAM.gov for amendments. 4 November 2026: Consolidated list of questions recieved between 2 November 2026 to 4 November 2026 uploaded to attachments.
-Combined Synopsis11/16/2026
THIS IS A REQUEST FOR INFORMATION (RFI) ONLY, which is being issued in accordance with (IAW) Federal Acquisition Regulation FAR Part 10 as part of market research. This is not a solicitation/request for proposal and no contract shall be awarded from this synopsis. The draft solicitation package is available in the attachemnets below. All interested parties should send responses and any comments/questions to Mr. Noah Lane, email: noah.r.lane.civ@army.mil. All responses must be received no later than 11:00 A.M. EST on 2 November 2026. All questions and comments must be in writing; no telephone calls will be accepted. The Government will not pay for any information received in response to this request, nor will the Government compensate any respondent for any costs incurred in developing the information provided to the Government. Capability Statements and other information received in response to this RFI will likely be used to make an small business set aside award. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement. Updated 29 October 2026: Solicitation updated to W91CRB-27-R-A005. Notice ID remains W91CRB-27-R-A005 but final solicitation will be updated to W91CRB-27-R-A005. Draft solicitaion extended to 2 November 2026 Q&A posted Updated 30 October 2026: Addition to Section L: Property management plan Clauses added: 52.245-1 ALT 1 52.245- 2 52.245-9 252.245-7003 252.245-7005 52.208-9 52.208-90 Updated 2 November 2026: Performance Work Statement updated to include streamlined Government Furnished Propoerty (GFP) and Contractor Acquired Property (CAP) requirements.
-Pre-Solicitation11/02/2026
Welding Mig Wire
-Combined Synopsis08/27/2026
See Amendment 0001.Lock 27 Equipment Procurement Diesel Welder.
-Combined Synopsis08/27/2026
AMENDING TO CORRECT CLOSING DATE FOR MILLER DYNASTY 800 WELDER PACKAGE
-Combined Synopsis08/18/2026

Additional Details

Solicitation Number

PANAPG-26-P-0000_046078

Archive Date

Jun 26, 2026

Office Address

ABERDEEN PROVING GROU, MD, 21005-5001