Gatehouse Exterior Stair Repair, Townshend Lake, Townshend, VT
Archived on July 23, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM EDT
- Posted
- June 25, 2026
- Notice type
- Solicitation
- Set-aside
- Service-Disabled Veteran-Owned Small Business Set Aside
- NAICS
- 238110: Poured Concrete Foundation and Structure Contractors
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION NORTH ATLANTIC.ENDIST NEW ENGLAND.W2SD ENDIST NEW ENGLAND
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W912WJ26QA122
- Notice ID
- 043d7c3871984a749eb9f14eccdb3943
Description
THIS PROCUREMENT IS SET ASIDE FOR SERVICE DISABLED VETERAN OWNED SMALL BUSINESSES
THE WORK CONSISTS OF:
Furnish all labor, materials, and equipment necessary to complete the following Gatehouse Exterior Stair Repair at Townshend Lake, Townshend, VT in accordance with the following Statement of Work, Specifications and Drawings.
The contractor shall complete concrete, crack, and sealing repairs on the exterior stairs that are located on the West Face of the gatehouse tower. All repairs shall involve sounding and finding limits of repairs, removal of deteriorated concrete, surface preparation, concrete, crack, and sealer repairs to the stairs. The contractor shall sound all repair areas to find the extents of the repairs and shall remove the unsound concrete to a minimum depth of three (3) inches, or to the extent of unsound concrete. The contractor will then repair the unsound concrete area to the original thickness and will match the existing or intended profiles.
The contractor shall repair the cracks using either an epoxy injection or joint sealant. Cracks shall be routed, backer rod added, and sealed.
Floor drain piping shall extrude further than existing and be made of hot dipped galvanized steel and sized to be 1/8” diameter larger than existing drainpipe. A hydrophilic type of sealant will be used to combine the two sections of pipe and create a watertight seal.
The magnitude of construction is between $100,000 and $250,000.
This procurement is set-aside for Service Disabled Veteran Owned Small Business vendors. The applicable NAICS code is 238110 with a Small Business Size Standard of $19 Million.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (5)
- Download
Solicitation Survey 26QA122.pdf
310 KBAdded in Solicitation version 4Posted - Download
Solicitation W912WJ26QA122.pdf
1.5 MBAdded in Solicitation version 4Posted - Download
Amendment W912WJ26QA122-0001.pdf
1.3 MBAdded in Solicitation version 4Posted - Download
Appendix A - Plans and Drawings.pdf
6.9 MBAdded in Solicitation version 4Posted - Download
Appendix B-Specifications.pdf
269 KBAdded in Solicitation version 4Posted
Lifecycle
- 6Version 6PresolicitationArchived
Gatehouse Exterior Stair Repair, Townshend Lake, Townshend, VT
- 4Version 4SolicitationArchivedCurrent
Type changed from Presolicitation to Solicitation
Gatehouse Exterior Stair Repair, Townshend Lake, Townshend, VT
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The U.S. Army Corps of Engineers, New England District is solicitating an Invitation for Bids (IFB) for Electrical Feeder Upgrades at the Black Rock Lake Dam in Thomaston, Connecticut. This will be a 100% Small Business Set-Aside IFB procurement. The NAICS code for the work described below is 238210 with a size standard of $19M. The project is planned to be issued in July 2026 and will be set aside for Small Businesses. The period of performance will be approximately 180 days. The estimated magnitude of this project is between $750,000 and $1,250,000.The work of this project involves electrical feeder upgrades at the Black Rock Lake Dam in Thomaston, Connecticut. Specific work tasks include, but are not limited to, replacing the existing overhead dam feeder (which runs underneath a high voltage line) from the project office to a designated manhole with a buried conduit duct bank.The existing gate tower feeder is in an existing buried duct bank which runs up the dam face and in exposed conduit beneath the gate tower bridge will be removed and replaced with new. The fused disconnect at the existing overhead line end will be removed. The existing manual transfer switches in the gate tower and project office will be removed. The existing 480V Panel-A, transformer, and 120/208 Panel-B in the gate tower will be removed and replaced with new. The existing service entrance circuit breaker and its enclosure will remain and be reused. Install new propane genset in the project office parking lot. Install a new propane tank with an underground propane line connected to the genset. The new genset will be sized to power both the project office and the gate tower on loss of utility. The propane tank will be sized to provide 5 days of run time before needing to be refilled. Install a new properly sized automatic transfer switch to feed existing panel MDP-1 from either the existing utility feeder or the new propane genset. | 53% | Solicitation | 09/10/2026 |
USACE, Pittsburgh District, has an upcoming requirement to replace the siding of the Resource Managers Office at Youghiogheny River Lake. The work described herein shall be performed at the Youghiogheny Resource Managers Office (RMO) building located within the Youghiogheny River Lake project area in Confluence, Pennsylvania. The building currently serves as administrative office space for the U.S. Army Corps of Engineers. The RMO building was constructed in 1986 and is a multi-level, timber-framed structure built into the hillside overlooking the impoundment side of the dam. The exterior walls consist of 2x6 wood stud framing with 6-inch fiberglass batt insulation (R-19, foil-faced). Interior partitions consist of 2x4 wood studs with 1/2-inch gypsum wallboard. The existing exterior wall assembly consists of 1/2-inch asphalt-saturated fibrous sheathing with 5/8-inch cedar-faced T1-11 plywood siding, for a combined nominal thickness of 1-1/8 inches. Exterior trim and fascia consist of various widths of cedar lumber. The building is supported by cast-in-place concrete footings and 12-inch concrete masonry unit (CMU) foundation walls. The rear wall section and balcony framing are supported by 4 feet-0 inches wide by 5 feet-0 inches deep concrete footings, laminated wood columns (8-3/4 inches x 15 feet-0 inches), and laminated wood beams (8-3/4 inches x 15 feet-0 inches).This project consists of the removal and replacement of the existing exterior wall cladding system. The Contractor shall remove and dispose of the existing T1-11 siding and 1/2-inch asphalt-saturated fibrous sheathing in their entirety. The Contractor shall furnish and install a new exterior wall assembly consisting of 1/2-inch APA-rated structural wood sheathing, a continuous weather-resistive barrier (WRB), 3/8-inch nominal preservative-treated wood furring strips, and 5/16-inch fiber cement lap siding in accordance with manufacturer requirements. The new wall assembly is intended to match the existing wall thickness (approximately 1-1/8 inches) to maintain alignment with existing window and door openings. Minor dimensional variation within normal construction tolerances are acceptable and shall not require modification or resetting of existing windows and doors. The Contractor shall not reset, relocate, or otherwise modify existing windows and doors. Furring strips shall be installed vertically over the WRB at a maximum spacing of 16 inches on center and shall be fastened through the sheathing into wall framing members. Fiber cement siding shall be installed horizontally over the furring strips and fastened through the furring and sheathing into wall framing members. Furring strips are intended to provide a drainage and ventilation cavity and shall not be used as the sole fastening substrate for the fiber cement lap siding. The Contractor shall ensure that all fiber cement lap siding edges are supported by framing members or approved blocking in accordance with manufacturer requirements. The Contractor shall furnish and install all required trim at windows, doors, corners, and transitions. Trim material shall be fiber cement. The cedar hand railing on the balconys is to be new capped PVC or capped composite decking of matching color to fiber cement board siding. The Contractor shall provide complete flashing at all required locations, including but not limited to head flashing at windows and doors, Z-flashing at horizontal joints and transitions, and kick-out flashing at roof-to-wall intersections. All flashing shall be integrated with the WRB in a shingle-lap manner to maintain a continuous drainage plane. The work shall be completed within 180 after written Notice to Proceed. The acquisition will be procured as 100% Set-Aside for Small Business. The resulting award will be for one (1) Firm-Fixed-Price (FFP) Contract. All responsible Quoters are encouraged to participate. The Request for Quotes (RFQ) will be issued on or about 19 August 2026, online through Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov; therefore, requests for hardcopies of the solicitation will not be honored. The North American Industrial Classification System (NAICS) Code for this acquisition is 238170 - Siding Contractors. The Small Business Size Standard for this NAICS Code is $19,000,000.00. In order to submit a Bid on this project, your company must- Be registered in System for Award Management (SAM) and maintain an active registration status. Be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER Manger role. System for Award Management (SAM) Registration Registering in SAM.gov includes both entity validation and entity registration. To register in SAM: Navigate to SAM.gov Select Sign-In (top right) Select Create an Account then Follow the Instructions. After Account is Set-up, Select Sign In. Under the Entity Management widget, Select “Get Started” button. Select Register Entity. As part of entity registration, a Unique Entity ID will be assigned. For Additional Information on SAM To Register Your Entity (company), please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index . Here you will find the following, Get Started with Your Registration Check Registration Status – ACTIVE, INACTIVE, PENDING Update Your Registration Become an Entity Administrator Validate Your Entity *Access User Guides *By selecting this option, you can obtain a Quick Start Guide for Contract Registrations. Also, here you will find in addition to the User Guides - FAQs, Videos, and Definitions. PLEASE NOTE It is mandatory that all companies be registered in SAM in order to receive federal contracts. There is no charge to register or maintain your company (entity) registration. Login.gov manages usernames and passwords for SAM.gov. *Important* Registration Information Registration can take at least ten (10) business days to be active in SAM.gov. Registration must be in active status upon offer submission and remain active during award period. Registration must be renewed every 365 days to remain active. The Federal Service Desk (FSD) for SAM questions, may be contacted. Phone Number: 866-606-8220 Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ET Procurement Integrated Enterprise Environment (PIEE) Solicitation Module Registration To register for PIEE follow the below instructions. Register in PIEE: a. Navigate to https://piee.eb.mil/ b. Select Register [top right] c. Select Vendor d. Create a User ID and Password and follow the prompts [next] e. Create Security Questions [next] f. Complete your User Profile Information [next] g. Complete your Supervisor or Approving Official Information [next] h. Complete Roles i. Step 1. Select SOL-Solicitation ii. Step 2. Select Proposal Manager iii. Step 3. Click Add Roles iv. Step 4. Fill in your Location Code (CAGE Code) [next] i. Provide a justification for your registration [next] j. Follow the remaining prompts to submit your registration The Procurement Integrated Enterprise Environment (PIEE) help desk may be reached by calling telephone number 866-618-5988 for assistance. | 53% | Pre-Solicitation | 08/19/2026 |
***A pre-construction site visit is scheduled at 10:00 AM Central Time, 10 November 2026 at the Rock Island Arsenal – Joint Manufacturing and Technology Center (RIA-JMTC). Attendees will park in the South side of the JMTC building complex in lot B212 then meet Government representatives at the turnstile. All attendees will be required to wear steel-toed safety shoes and safety glasses. Reservations for this site visit are mandatory for all attendees at least one business day prior to the site visit. If you currently have badge access, you still must make a reservation for the site visit in order for the Government to control the number of attendees at any given time. You will not be allowed to attend without a reservation regardless of installation access. Vendors who do not have an access badge to RIA must request access via following: The Visitor Access Form, instructions, and “How Do I Get on Post?” flowchart can be found at https://home.army.mil/ria/about/visitor-information. Click on Pass Request Information (middle right), to Visitor Access Form and follow all instructions contained therein. POC for this action is Contract Specialist, Leigh Weeks, leigh.a.weeks2.civ@army.mil. The solicitation for this requirement will be posted on 04 November 2026. This pre-solicitation synopsis is to notify the public that a solicitation will be forthcoming for Concrete Pads in building 220 and 299. This solicitation will result in a Firm Fixed Price contract at the Rock Island Arsenal, Joint Manufacturing and Technology Center (RIA-JMTC). All details will be in the solicitation itself. Estimated issue date for the solicitation is on or around 04 November 2026. This solicitation will be issued electronically in accordance with FAR 4.502 and 5.102, therefore, hard copies will not be provided, although may be downloaded on or after the issue date by accessing SAM.gov. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain an interested party list, therefore, it is recommended that any interested parties periodically access the above internet address in order to obtain amendments which may be issued. Failure to obtain any said amendments and respond to them prior to the date and time set may render your quote nonresponsive and result in the rejection of the same. All responsible sources may submit a quote which will be considered by the Government. **Please note, this is a notice that a solicitation is anticipated to be forth coming and will be posted on or around 04 November 2026 that will have all the necessary specifications. | 52% | Solicitation | 11/20/2026 |
The U.S. Army Corps of Engineers, Wilmington District is requesting all labor, materials, and equipment necessary to install a 24ft-10in x 34ft-4in concrete pad with column foundations for a prefabricated shelter at the B. Everett Jordan Dam Tailrace Park. The Contractor shall provide all labor, quality control, equipment, fuel, supplies, and transportation necessary for the performance of the concrete pad installation in strict accordance with the Statement of Work. The resulting award issued from this request will result in one award. | 52% | Solicitation | 11/10/2026 |
Amendment posted to add a site visit for September 9th, 2026 @10:00 am. 42160 State Highway 43. Clayton, OK. | 46% | Solicitation | 09/11/2026 |
Additional Details
Solicitation Number
W912WJ26QA122
Archive Date
Jul 23, 2026
Office Address
CONCORD, MA, 01742-2751