Unmanned Aircraft System (UAS)
Archived on April 15, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM EDT
- Posted
- March 9, 2026
- Notice type
- Sources Sought
- Set-aside
- No Set aside used
- NAICS
- 336413: Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Agency
- Department of JusticeATF ACQUISITION AND PROPERTY MGMT DIV
Notice details
- Office
- ATF
- Place of performance
- Washington, District of Columbia, 20226
- Last updated
- Nov 2, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- DJA26AHDQN0001
- Notice ID
- 12be254f2d1e4f189745796f331ee0a2
Description
This Request for Information (RFI) as identified in the Federal Acquisition Regulation (FAR) 15.201 (c) (7) is issued solely for market research and planning purposes. It does not constitute an Invitation for Bids, Request for Proposal, or Request for Quotes.
The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) has a requirement to obtain Unmanned Aircraft System (UAS) information. ATF is looking to gather information on companies who provide similar commodities.
Amanedment #1 is here by issued to provide all Questions and Answers received, see attachment
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Lifecycle
- 1Version 1Sources SoughtArchived
Unmanned Aircraft System (UAS)
- 3Version 3Sources SoughtArchivedCurrent
Unmanned Aircraft System (UAS)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
RFI questions and answers posted on December 5, 2025. RFI questions are due by November 21, 2025. RFI responses are due by December 12, 2025. SMALL UNMANNED AIRCRAFT SYSTEMS (sUAS) LEVEL III sUAS REQUEST FOR INFORMATON DESCRIPTION: U.S. Customs and Border Protection (CBP) is conducting market research through a Request for Information (RFI) on the current availability and technological capabilities of vendors to provide Level III Small Unmanned Aircraft Systems (SUAS) to enhance USBP’s SUAS Program. THE GOVERNMENT DOES NOT INTEND TO AWARD A CONTRACT ON THE BASIS OF THIS RFI OR TO OTHERWISE PAY FOR INFORMATION RECEIVED. This RFI is issued solely for information, planning purposes, and market research only; it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP. This research does not commit the Government to contract for any supply or service. CBP will not pay for any costs associated with responding to this research. Not responding to this RFI does not preclude participation in any full future full and open competition RFP. If a solicitation is released, it will be posted to the SAM.gov (https://sam.gov) website. All submissions become the property of the Government and will not be returned. The information obtained from industries responses to this RFI may be used in the development of an acquisition strategy and future RFP. | 80% | Market Research | 12/12/2026 |
Unmanned Aerial System (UAS) with Aerial IgnitionCapabilities1. Scope and Objective The purpose of this solicitation is to procure a commercial-off-the-shelf (COTS) Unmanned Aerial System (UAS) equipped with an aerial ignition payload system, thermal and optical sensors, and required support equipment. The system will primarily be used for forestry, land management, and controlled burn operations. 2.Regulatory and Compliance Requirements To be considered for award, the proposed system MUST meet the following compliance standards: NDAA / Buy American Compliance: The UAS and all associated components (including sensors and payloads)must be fully compliant with Section 848 of the National Defense Authorization Act(NDAA) and the Buy American Act. DIU Blue UAS Cleared List Status: The bidder MUST explicitly state in their proposal/quote whether the proposed UAS platform is currently listed on the Defense Innovation Unit (DIU) Blue UAS Cleared List. This status is a critical factor for agency procurement routing and must be verified by the vendor. FAA Regulations: The system must comply with current Federal Aviation Administration(FAA)regulations for public or civil aircraft operations. 3. Minimum Technical Specifications 3.1.Flight Performance and Payload Flight Time: The UAS must be capable of a minimum 55-minute flight time without a payload. When carrying a heavy payload (up to 35 lbs.), it must maintain a flight time of at least 10 minutes. While operating the aerial ignition payload, flight time must be at least 22 to 30 minutes. Payload Capacity: Must each have a minimum payload capacity of 35 lbs. Range: Must support a communication range of up to 5kilometers with a clear line of sight from the controller to the aircraft. Deployment: The system must be capable of being assembled and ready for flight within 5minutes. 3.2.Environmental and Durability Temperature Range: Must be fully operable in temperatures ranging from 40 degrees Fahrenheit to 105 degrees Fahrenheit. Wind Resistance: Must be 1 each capable of stable flight in winds up to 15 meters per second. Humidity: Must be capable of operating in up to 90 percent non-condensing humidity. 3.3.Aerial Ignition System Payload Functionality: Must feature a payload capable of carrying, accurately delivering ,and dropping ignition spheres. Safety Features: Must include are mote emergency release system to physically drop or jettison the ignition payload in the event of a hung sphere to prevent damage or fire to the UAS. Must feature geo-fencing capabilities to prevent ignition spheres from being dropped outside of designated burn areas. Must include onboard sensors to detect obstructions, internal resistance, and temperature anomalies within the payload. 3.4. Sensors and Imaging Thermal Imaging: Must include a radio metric thermal camera with a minimum resolution of 640 x 512 pixel sat 30Hz. Optical Camera: Must include a Full HD visual camera with at least a 10x optical zoom capability. Multispectral Capabilities (Optional or Priced Separately): Ability to integrate multi spectral sensors (such as high-resolution panchromatic sensor, integrated thermal imager, and multiple spectral bands). 3.5. Navigation, Data, and Control Navigation: Must utilize high-precision GPS (centimeter-level accuracy, such as F9P or equivalent). Autonomy: Must support both manual flight via controller and autonomous flight missions using pre-programmed waypoints. Data Transmission: All real-time data transmission must been crypted over a 2.4Ghz frequency. Software Integration: Mission planning software must allow the importation of burn plans and maps in standard geo-referenced formats (such as PDFs, KMZs). 4. Required Equipment and Deliverables The vendor shall provide a complete, ready-to-fly package that includes, at a minimum: 1xNDAA-Compliant, DIU Blue UAS Cleared (or verified equivalent) UAS Platform 1xAerial Ignition Payload System 1x Ground Control Station (GCS) / Controller 1x Therma land Optical Camera Package 4x Sets of Flight Batteries 2x Battery Chargers (Double charger kit preferred) 2xBattery Transport Cases Spare parts kit (including spare CW and CCW propellers) 5.Training, Maintenance, and Support Training: The vendor must provide a comprehensive training seminar (minimum 3 days) for up to five (5) personnel. Maintenance Documentation: Must include comprehensive maintenance and repair instructions. Extended Care / Support Plan: The vendor will provide an annual maintenance subscription or care plan that includes: Annual inspection and calibration (Clean and Check). Software updates. Discounts on expedited labor, parts, and repair shipping. Access to dedicated technical support. | 77% | Combined Synopsis | 08/27/2026 |
Item:Unmanned Aerial System (UAS) withAerial Ignition Capabilities UASBrand Name:Alta X+ IGNISPart Number:Salient Characteristics:Unmanned Aerial System (UAS) with Aerial Ignition Capabilities1. Scope and Objective The purpose of this solicitation is to procure a commercial-off-the-shelf (COTS) Unmanned Aerial System (UAS) equipped with an aerial ignition payload system, thermal and optical sensors, and required support equipment. The system will primarily be used for forestry, land management, and controlled burn operations. 2.Regulatory and Compliance Requirements To be considered for award, the proposed system MUST meet the following compliance standards: NDAA / TAA Compliance: The UAS and all associated components (including sensors and payloads) must be fully compliant with Section 848 of the National Defense Authorization Act (NDAA) and the Trade Agreements Act (TAA). DIU Blue UAS Cleared List Status: The bidder MUST explicitly state in their proposal/quote whether the proposed UAS platform is currently listed on the Defense Innovation Unit (DIU) Blue UAS Cleared List. This status is a critical factor for agency procurement routing and must be verified by the vendor. FAA Regulations: The system must comply with current Federal Aviation Administration (FAA)regulations for public or civil aircraft operations. 3. Minimum Technical Specifications 3.1.Flight Performance and Payload Flight Time: The UAS must be capable of a minimum 55-minute flight time without a payload. When carrying a heavy payload (up to 35 lbs.), it must maintain a flight time of at least 10 minutes. While operating the aerial ignition payload, flight time must be at least 22 to 30 minutes. Payload Capacity: Must have a minimum payload capacity of 35 lbs. Range: Must support a communication range of up to 5kilometers with a clear line of sight from the controller to the aircraft. Deployment: The system must be capable of being assembled and ready for flight within 5 minutes. 3.2.Environmental and Durability Temperature Range: Must be fully operable in temperatures ranging from 40 degrees Fahrenheit to 105 degrees Fahrenheit. Wind Resistance: Must be 1 each capable of stable flight in winds up to 15 meters per second. Humidity: Must be capable of operating in up to 90 percent non-condensing humidity. 3.3. Aerial Ignition System Payload Functionality: Must feature a payload capable of carrying, accurately delivering, and dropping ignition spheres. Safety Features: Must include a remote emergency release system to physically drop or jettison the ignition payload in the event of a hung sphere to prevent damage or fire to the UAS. Must feature geo-fencing capabilities to prevent ignition spheres from being dropped outside of designated burn areas. Must include onboard sensors to detect obstructions, internal resistance, and temperature anomalies within the payload. 3.4. Sensors and Imaging Thermal Imaging: Must include a radiometric thermal camera with a minimum resolution of 640 x 512 pixels at 30Hz. Optical Camera: Must include a Full HD visual camera with at least a 10x optical zoom capability. Multispectral Capabilities (Optional or Priced Separately): Ability to integrate multispectral sensors (such as high-resolution panchromatic sensor, integrated thermal imager, and multiple spectral bands). 3.5. Navigation, Data, and Control Navigation: Must utilize high-precision GPS (centimeter-level accuracy, such as F9P or equivalent). Autonomy: Must support both manual flight via controller and autonomous flight missions using pre-programmed waypoints. Data Transmission: All real-time data transmission must been crypted over a 2.4Ghz frequency. Software Integration: Mission planning software must allow the importation of burn plans and maps in standard geo-referenced formats (such as PDFs, KMZs). 4. Required Equipment and Deliverables The vendor shall provide a complete, ready-to-fly package that includes, at a minimum: 1x NDAA-Compliant, DIU Blue UAS Cleared (or verified equivalent) UAS Platform 1x Aerial Ignition Payload System 1x Ground Control Station (GCS) / Controller 1x Thermal and Optical Camera Package 4x Sets of Flight Batteries 2x Battery Chargers (Double charger kit preferred) 2xBattery Transport Cases Spare parts kit (including spare CW and CCW propellers) 5.Training, Maintenance, and Support Training: The vendor must provide a comprehensive training seminar (minimum 3 days) for up to five (5) personnel. Maintenance Documentation: Must include comprehensive maintenance and repair instructions. Extended Care / Support Plan: The vendor should offer an annual maintenance subscription or care plan that includes: Annual inspection and calibration (Clean and Check). Software updates. Discounts on expedited labor, parts, and repair shipping. Access to dedicated technical support. | 77% | Combined Synopsis | 08/13/2026 |
Unmanned Aircraft System Kinetic Strike Payload | 77% | Combined Synopsis | 03/16/2026 |
This synopsis is for informational purposes only. It shall not be constructed as a commitment by the Government to contract for any supply. The U.S. Government is not seeking order requests for proposals at this time and will not accept unsolicited proposals in response to this synopsis. Responses in any forms are not offers and the Government is under no obligations to award a contract because of this announcement. Any information submitted by respondents is strictly voluntary. RCO Bavaria is seeking to identify US and European based manufacturer or European based third-party distributor vendors with the interest and resources to enter into a Blanket Purchase Agreement (BPA) for small Unmanned Aircraft Systems (sUAS) Ready to Fly and Purpose Built Attritable Systems (PBAS) First-person View (FPV) Drone Build Kits, counter-UAS, accessories, spare parts, and supplies. NOTE: Potential vendors who are a authorized distributor of Blue UAS Cleared or Select list should NOT reply to this notice; Instead, please refer to Notice ID: W911S225QSUAS for further instructions. Vendors must be registered with the System for Award Management (SAM) and maintain this registry throughout the tenure of the agreement. Instructions to Interested Vendors: If your organization is interested in being considered for inclusion in this BPA, respond electronically to the point of contact information below. Responses must reference USAREUR-AF Small Unmanned Aircraft Systems (sUAS) Blanket Purchase Agreement in the subject field and include the following: 1) UEI Number 2) CAGE Code 3) POC's name, physical address, email address, and telephone number 4) Website Adress 5) Capability Statement | 77% | Market Research | 12/31/2028 |
Additional Details
Solicitation Number
DJA26AHDQN0001
Archive Date
Apr 15, 2026
Office Address
WASHINGTON, DC, 20226