GovChime
Notice ID: 91a4b0a6fe2f49f4a2b6ab8fc958bb4dSolicitationArchived

Repair of Mini-Mutes Circuit Card Assembly

Archived on December 6, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM MST
Posted
November 12, 2025
Notice type
Solicitation
Set-aside
No Set aside used
NAICS
811210: Electronic and Precision Equipment Repair and Maintenance
Agency
Department of WarDepartment of the Air Force

Notice details

Office
AIR FORCE MATERIEL COMMAND.AIR FORCE SUSTAINMENT CENTER.FA8250 AFSC PZAAA
Last updated
Nov 6, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
FA825026Q0035
Notice ID
91a4b0a6fe2f49f4a2b6ab8fc958bb4d

Description

***For those interested in qualifying please review the Repair Qualification Requirements (RQR)***

Please review the Performance Work Statement (PWS) for details.

NOTE: It is the responsibility of the offeror to ensure their proposal has been successfully emailed to the Primary Contact of this contract opportunity. After sending an email with your proposal, please send another email with no attachments to verify the Primary Contact received your proposal. Please review all documents thoroughly. If there are any questions, please don't hesitate to email the Primary Contact.


PR Number(s): FD20202600035
Line Item: 0001
NSN: 5998014771786FD CIRCUIT CARD ASSEMB
P/N: 3050777-101, 
Description: Self-contained module of interconnected electronic components, for use in NHA.
Supp. Description: Fiberglass/Epoxy
Quantity: 1.0000 EA

Delivery: *30 Days *ARO After Receipt of Carcass
   Destn: PLANT,,   ,          . 
   Quantity: 1.00
   Unit of Issue: EA

PR Number(s): FD20202600035
Line Item: 0002
NSN: 5998014771786FD CIRCUIT CARD ASSEMB
P/N: 3050777-101, 
Description: Self-contained module of interconnected electronic components, for use in NHA.
Supp. Description: Fiberglass/Epoxy
Quantity: 1.0000 EA

Delivery: *180 Days *ARO After Completion of Study
   Destn: SW3210,HILL AFB              UT 84056-5734,49 ,84056-5734. 
   Quantity: 1.00
   Unit of Issue: EA

PR Number(s): FD20202600035
Line Item: 0003
NSN: 5998014913752FD CIRCUIT CARD ASSEMB
P/N: 3050945-101, 
Description: Single Board Computer
Supp. Description: Laminate
Quantity: 3.0000 EA

Delivery: *30 Days *ARO After Receipt of Carcass
   Destn: PLANT,,   ,          . 
   Quantity: 3.00
   Unit of Issue: EA

PR Number(s): FD20202600035
Line Item: 0004
NSN: 5998014913752FD CIRCUIT CARD ASSEMB
P/N: 3050945-101, 
Description: Single Board Computer
Supp. Description: Laminate
Quantity: 3.0000 EA

Delivery: *180 Days *ARO After Completion of Study
   Destn: SW3210,HILL AFB              UT 84056-5734,49 ,84056-5734. 
   Quantity: 3.00
   Unit of Issue: EA

PR Number(s): FD20202600035
Line Item: 0005
NSN: 5998014988206FD CIRCUIT CARD ASSEMB
P/N: 3050945-120, 
Description: Self-contained module of interconnected electronic components, for use in NHA.
Supp. Description: Fiberglass/Epoxy
Quantity: 4.0000 EA

Delivery: *30 Days *ARO After Receipt of Carcass
   Destn: PLANT,,   ,          . 
   Quantity: 4.00
   Unit of Issue: EA

PR Number(s): FD20202600035
Line Item: 0006
NSN: 5998014988206FD CIRCUIT CARD ASSEMB
P/N: 3050945-120, 
Description: Self-contained module of interconnected electronic components, for use in NHA.
Supp. Description: Fiberglass/Epoxy
Quantity: 4.0000 EA

Delivery: *180 Days *ARO After Completion of Study
   Destn: SW3210,HILL AFB              UT 84056-5734,49 ,84056-5734. 
   Quantity: 4.00
   Unit of Issue: EA

PR Number(s): FD20202600035
Line Item: 0007
Data

Description: IAW DD Form 1423-1. Data Item No.A001, A002, A003 CAVAF CDRL
Quantity: 1.0000 EA

Delivery: *24 Hours   *ARO After a supply or maintenance action
   Destn: FB2029,HILL AFB              UT 84056,49 ,84056-4056. 
   Quantity: 1.00
   Unit of Issue: EA

PR Number(s): FD20202600035
Line Item: 0008
Data

Description: IAW DD Form 1423-1 Data Item No.B001 Repair Item Inspection Report.
Quantity: 2.0000 EA

Delivery: *7 Calendar Days   *ARO After completion of the contract
   Destn: FY2073,HILL AFB              UT 84056-5820,49 ,84056-5820. 
   Quantity: 2.00
   Unit of Issue: EA

PR Number(s): FD20202600035
Line Item: 0009
Data

Description: IAW DD FORM 1423-1 DATA ITEM No. C001 Counterfeit Prevention Plan
Quantity: 2.0000 EA

Delivery: *30 Calendar Days   *ARO After contract award
   Destn: FY2073,HILL AFB              UT 84056-5820,49 ,84056-5820. 
   Quantity: 2.00
   Unit of Issue: EA

PR Number(s): FD20202600035
Line Item: 0010
Data

Description: IAW DD Form 1423-1 Data Item No. D001 Engineering Change Proposal
Quantity: 3.0000 EA

Delivery: *14 Calendar Days   *ARO After completion of TT&E, AS NEEDED
   Destn: FY2073,HILL AFB              UT 84056-5820,49 ,84056-5820. 
   Quantity: 3.00
   Unit of Issue: EA
 

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (10)

  • Attachment_9_CDRLs.pdf

    834 KBAdded in Solicitation version 1Posted
    Download
  • Attachment_5_PWS.docx

    65 KBAdded in Solicitation version 1Posted
    Download
  • Attachment_8_RQRs.pdf

    615 KBAdded in Solicitation version 1Posted
    Download
  • Attachment_6_RDLs.pdf

    110 KBAdded in Solicitation version 1Posted
    Download
  • FA825026Q0035.pdf

    479 KBAdded in Solicitation version 1Posted
    Download
  • Attachment_4_Packaging_SOW.pdf

    139 KBAdded in Solicitation version 1Posted
    Download
  • Attachment_3_Packaging_Requirements.pdf

    77 KBAdded in Solicitation version 1Posted
    Download
  • Attachment_7_IUIDs.pdf

    132 KBAdded in Solicitation version 1Posted
    Download
  • Attachment_2_Item_Descriptions.pdf

    72 KBAdded in Solicitation version 1Posted
    Download
  • Attachment_1_CAVAF.docx

    52 KBAdded in Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1SolicitationArchived

    Repair of Mini-Mutes Circuit Card Assembly

    Notice 7d44be5908234271b92a18d6dddbb784 on SAM.gov

  2. 3
    Version 3SolicitationArchivedCurrent

    Repair of Mini-Mutes Circuit Card Assembly

    Notice 91a4b0a6fe2f49f4a2b6ab8fc958bb4d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
REQUEST FOR INFORMATION (RFI) Subject: Multiple Threat Emitter System (MUTES) & Mini-MUTES Data Package Assembly: Teardown, Test, and Evaluation (TT&E) and Technical Data Package (TDP) Development THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is issued solely for information and planning purposes – it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. This request for information does not commit the Government to contract for any supply or service whatsoever. Further, the U.S. Government is not at this time seeking proposals and will not accept unsolicited proposals. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party’s expense. Not responding to this RFI does not preclude participation in any future RFP, if any is issued. If a solicitation is released, it will be synopsized on Sam.gov. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement. The DAF is seeking industry partners with the capability to perform a comprehensive Teardown, Test, and Evaluation (TT&E) on the Azimuth (AZ) and Elevation (EL) Data Package assemblies used on the AN/MST-T1A MUTES and Mini-MUTES ground-based radar systems. PLEASE SEE THE RFI ATTACHMENT FOR ADDITIONAL INFORMATION CONCERNING THIS RFI. Requests for technical data must be requested through the points of contact below. Requests must include a copy of your JCP printout or DD 2345.
92%
Special Notice11/05/2026
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5998-01-598-5645 & NSN: 5998-01-598-5644 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): NORTHROP GRUMMAN SYSTEMS CORPORATION CAGE: 1L4J7 ADDRESS: 1740 Wehrle DR Buffalo, New York 14221-7032, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 120 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
81%
Market Research12/07/2026
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5840-01-659-4499 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): APPLIED SYSTEMS ENGINEERING INC CAGE: 3Z966 ADDRESS: 7510 Benbrook PKWY Benbrook, Texas 76126-2112, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 320 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
81%
Market Research12/07/2026
1. NOTICE: This is not a solicitation but rather a Sources Sought to determine potential sources for information and planning purposes only.1.1 The purpose of this Sources Sought is to conduct market research to determine if responsible sources exist, to assist in determining if this effort can be competitive and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210 which has a corresponding Size standard of $34M. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small business to include Service-Disabled Veteran-Owned, Hubzone, and Women-Owned small business concerns. The government requests that interested parties respond to this notice if applicable and identify your small business status to the identified NAICS code. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners.1.2 This sources sought synopsis does not constitute an Invitation for Bids (IFB), a Request for Quote (RFQ), or a Request for Proposal (RFP) and it should not be construed as a commitment of any kind by the government to issue a formal solicitation or ultimately award a contract. The U.S. Government is in no way liable to pay for or reimburse any companies or entities that respond to this announcement. Any costs incurred by interested companies in response to this announcement will NOT be reimbursed.2. Program Details:The Air Force is issuing this repair sources sought announcement as part of a market research survey to determine if additional sources exist that could become qualified for repair and restoration of the F-16 Radar Multiplier Assembly. The contractor would be required to repair and restore the F-16 Radar Multiplier Assembly to a serviceable condition, but not like new cosmetically. Responses to this Notice shall consist of an initial white paper (not to exceed 3 pages) describing the offeror?s capabilities with regard to trouble shooting, testing and repairing the F-16 items. The specific parts involved are as follows: FSC: 6625NIIN: 01-124-0226MMAC: WFPart #: 12604334-1NSN#: 6625-01-124-0226 Interested organizations who feel they possess the necessary capabilities should respond by providing the Government the following information: a point of contact, address, telephone, and fax numbers, email address, UEI number, CAGE code, and/or tax ID number, as well as size category, (large, small, small disadvantaged, etc.), a brief summary of the company?s capabilities, description of facilities, personnel, related manufacturing experience, and existing safety approvals (refer to the white paper listed above).Provide any supporting information such as commercial literature, catalogues, manuals, etc. If a respondent chooses to utilize the services of sub-tier vendors or subcontractors, those vendors or subcontractors must meet the criteria specified herein as well. Responses to this Notice are due on or before 04-17-2026. All information marked as proprietary information will be safeguarded to prevent disclosures to non-government personnel and entities.NOTE: Source Approval Request (SAR) packages are not the same as a Sources Sought Response. For instructions on how to become a qualified approved source contact the listed Source Development Specialist. Offerors must possess access to all appropriate data. Data verification information can be found in the RQR and RDL report for the items listed above. Technical Data Package and Drawing requests are to be made to The Public Sales Office at Tech Order Manuals: AFLCMC.LZP.PUBSALES@us.af.mil Engineering Data/Drawings: AFLCMC.LZP.TINKERPUBLICSALES@us.af.milFor instructions on how to become a qualified approved source, see the RQR and RDL attached to this posting. Please e-mail all SAR packages to the following:Tracey Beringer, Source Development Specialist, tracey.beringer@us.af.milVeronika Pett, veronika.pett@us.af.milDarin Rector, darin.rector@us.af.milThe announcement on Sam.gov is just for responses to the sources sought notice and is not a deadline for SAR submission. You may submit a SAR at any time.
80%
Market Research04/18/2026
The contractor shall provide all management, tools, equipment, and labor necessary to test, evaluate, repair, and restore F-16 UCADC components to a serviceable Condition Code A in accordance with OEM specifications, approved Technical Orders (TOs), and USAF engineering dispositions. Cosmetic restoration to like-new appearance is not required. These are Just-In-Time (JIT) unprogrammed repairs to maintain operational readiness and meet required turnaround times.Applicable Items: NSN 5998-01-399-5953 | P/N 8518945-902 | Circuit Card Assembly NSN 5998-01-399-8603 | P/N 8518948-903 | Circuit Card Assembly NSN 5998-01-399-8605 | P/N 8518951-902 | Circuit Card Assembly NSN 6130-01-410-9195 | P/N 8518938-902 | Power Supply Assembly NSN 6685-00-149-1026 | P/N 4007515-903 | Pressure Transducer NSN 6685-00-259-3013 | P/N 4007515-902 | Pressure Transducer NSN 5998-01-406-3089 | P/N 8518937-901 | Circuit Card Assembly NSN 5998-01-406-3087 | P/N 8518983-903 | Circuit Card AssemblyFor further details, please see the attached sources sought synopsis PDF.
77%
Market Research11/20/2026

Additional Details

Solicitation Number

FA825026Q0035

Archive Date

Dec 6, 2025

Office Address

HILL AFB, UT, 84056-5825