SOLICITATION:W912CH26QA072 CARRIER ASSEMBLY REFERENCE
Archived on September 25, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM EDT
- Posted
- August 27, 2026
- Notice type
- Solicitation
- NAICS
- 334519: Other Measuring and Controlling Device Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.ACC-CTRS.ACC-DTA.W6QK ACC- DTA
- Place of performance
- Texarkana, Texas, 75507
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W912CH-26-Q-A072
- Notice ID
- 8bbc473770434b5f810dccd93a029afa
Description
The Army Contracting Command – Detroit Arsenal (ACC-DTA) is issuing this Request for Quotation (RFQ) for the procurement of the Carrier Assembly Reference.
This solicitation, W912CH-26-Q-A072, will result in a Firm-Fixed Price (FFP) Contract, One-Time Buy with a 100% Option for the procurement of the following:
Noun: Carrier Assembly Reference
NSN: 6665-01-539-5590
Quantity: 371 Each (EA)
Option Quantity: 371 EA
First Article Test Report: Required
There is an export controlled Technical Data Package (TDP) associated with this procurement, distribution code D, limiting access to the Department of War (DoW) and U.S. DoD contractors only. Please refer to Section C for additional information.
Military preservation, packing, and marking are required and shall be accomplished in accordance with Section D, all applicable requirements of MIL-STD-2073-1, and the Special Packaging Instruction (SPI).
Joint Certification Program (Export Control): You must be certified under the United States/Canada Joint Certification Program (JCP) to be granted access to the TDP for this solicitation. (https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/). When requesting access to this solicitation’s TDP, please submit your firm’s approved DD2345 to the Point of Contact of this posting for review and approval.
The intended solicitation, and any amendments, will be issued electronically. The Government is under no obligation and is in fact unable to maintain a mailing list. Interested parties shall periodically access SAM.gov to obtain any amendments which may be issued. Failure to obtain any amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal nonresponsive and result in the rejection of the proposal.
Please submit one copy of your offer, in accordance with Section A of the solicitation, to be considered for award. Proposals are due no later than Friday September 25, 2026 at 4:00 PM Eastern Standard Time (EST). All offers submitted in response to this solicitation shall be valid for a minimum of 90 calendar days following the offer due date.
NOTICE: All contractors who provide goods/services to the Department of War (DoW) must be registered in the System for Award Management (SAM).
All questions pertaining to this RFQ shall be directed in writing to:
Jonice Green
CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL
E-MAIL: jonice.d.green.civ@army.mil
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (2)
- Requires SAM.gov sign-in
TDP_Army Package - TPP-EH6C0028EH ePDM Common A.1[1].zip
27 MBAdded in Solicitation version 1Posted - Download
Solicitation - W912CH26QA072.pdf
2.6 MBAdded in Solicitation version 1Posted
Lifecycle
- 1Version 1SolicitationArchived
SOLICITATION:W912CH26QA072 CARRIER ASSEMBLY REFERENCE
- 3Version 3SolicitationArchivedCurrent
SOLICITATION:W912CH26QA072 CARRIER ASSEMBLY REFERENCE
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Request for Preproposals for Vehicle Integrated Platform Enhanced RADIAC (VIPER): Non-GM Alternative Sensor Prototype for Tracked Tactical Ground Vehicles This requirement will be handled through the procedures established in the Broad Other Transaction Authority Announcement (BOTAA) Supporting Other Transaction Authority Agreements for Prototype Development Efforts for the JPEO CBRND – Combating Weapons of Mass Destruction (“JPEO-CBRND CWMD BOTAA-24-01”). Please review the BOTAA announcement and submission requirements in full prior to submitting a Pre-Proposal. Ensure that your submission references “CWMD BOTAA-24-01 VIPER_27-TRACK." Link to BOTAA: https://sam.gov/workspace/contract/opp/2d04622b25364669857a6a61c576ade9/view Pre-proposals are due no later than 12:00 PM EST on December 10, 2026. The full request for pre-proposals is attached to this posting. | 66% | Pre-Solicitation | 12/10/2026 |
Amended to add set aside code. The proposed Coordinate Measuring Machine shall meet or exceed the following minimum requirements: 2.1 Machine Structure and Measuring Volume a. Fixed bridge or equivalent high-precision bridge-style Coordinate Measuring Machine. b. Measuring volume shall be no less than: X-Axis: 900 mm Y-Axis: 1,500 mm Z-Axis: 800 mm c. Machine shall utilize a tri-cision, thermally stable bridge construction or an equivalent structural design that provides equal or superior stiffness, geometric stability, and measurement performance. d. Machine shall include vibration damping technology or an equivalent vibration isolation solution suitable for a production inspection environment. 2.2 Performance Requirements. The CMM shall provide performance equal to or better than the following: a. Maximum volumetric measurement speed of not less than 510 mm per second. b. Maximum acceleration capability of not less than 1,700 mm per second . c. Length measurement error (MPEE) of 1.5 plus per 333 microns or lower in accordance with ISO 10360-2. d. Maximum permissible probing error (MPL) of 1.5 microns or less. e. Maximum permissible scanning performance (MPE THP) of 2.9 microns or less within a 45-second test cycle. Based on ISO1360 specifications. Equivalent performance metrics validated through recognized industry standards will be considered.2.3 Probe and Sensor Configuration a. Machine shall include a motorized articulating probe head capable of automatic indexing. b. Probe head shall provide indexing increments of 7.5 degrees or finer. c. System shall include an X1H scanning probe or an equivalent high-speed contact scanning probe capable of continuous surface data acquisition and precision feature measurement. 2.4 Controller Requirements a. Machine shall include an HH-C-V2.1 controller or a controller of equal or greater capability. b. Controller shall support high-speed scanning, automatic probe head operation, CAD-based inspection programming, fast probe mode and network integration. c. System shall include a DC241 motion control system operating on 115V power or an equivalent controller providing equal or greater functionality. 2.5 Thermal Compensation a. Machine shall include thermal compensation capability equivalent to Kit Clima Thermal Compensation Version 19 or newer. b. System shall provide automatic linear thermal compensation for both workpiece and scale measurements. c. Thermal compensation system shall continuously monitor environmental conditions and apply correction factors during measurement operations. 2.6 Air Preparation System a. Machine shall include an air dryer and filtration package compatible with 110V operation. b. Air preparation equipment shall be sized appropriately for continuous operation of the supplied CMM. 33. SOFTWARE REQUIREMENTS 3.1 Inspection Software a. System shall include PC-DMIS CAD plus 2 Version 2026.1 or newer, or an equivalent CAD-based metrology software platform. b. Software shall support: CAD model import and interrogation, GD and T evaluation, Automated inspection routines, Contact scanning applications, Report generation 3.2 Probe Management Software a. System shall include PC-DMIS Tip Changer Module Version 2026.1 or newer, or equivalent automated probe management functionality. b. Software shall support automatic probe qualification and probe exchange operations.4. FIXTURING REQUIREMENTS a. Contractor shall provide a modular fixturing system consisting of a minimum 30-inch fixture system and associated component kit. b. Fixturing system shall support flexible setup of prismatic and complex workpieces. 5. INSTALLATION AND ACCEPTANCE a. Contractor shall provide delivery, installation, startup, calibration, and operational checkout. b. Following installation, contractor shall perform a complete machine performance verification in accordance with ISO 10360-2 and -5 standards. c. Acceptance shall occur after successful completion of installation and documented verification testing.6. TRAINING REQUIREMENTS The contractor shall provide classroom-based operator and programmer training including a. One (1) PC-DMIS Level 1 training course or equivalent introductory metrology software training. b. One (1) PC-DMIS Level 2 training course or equivalent advanced metrology software training. Equivalent training programs shall cover machine operation, CAD-based programming, probe management, reporting, scanning, and advanced inspection techniques.7. WARRANTY AND SUPPORT a. Contractor shall provide a minimum one-year comprehensive warranty covering parts, labor, and travel. b. Contractor shall provide MyCare Premium coverage or an equivalent premium support program. c. Premium support shall include technical assistance, software maintenance updates, Machine Certification and priority service response. d. Offerors proposing alternate support programs shall clearly identify service levels and written response times and commitments. | 63% | Combined Synopsis | 07/02/2026 |
The Joint Product Manager for Chemical, Biological, Radiological and Nuclear (CBRN) Sensing (JPdM CS), under the Joint Project Manager for Chemical, Biological, Radiological and Nuclear Integrated Early Warning (JPM CBRN IEW), under the Portfolio Management Executive Chemical, Biological, Radiological and Nuclear Defense (PME CBRND) within the Department of War (DoW), is conducting market research to identify potential industry sources capable of providing a Biological Warfare Agent (BWA) identification capability for integration into the U.S. Navy's Enhanced Maritime Biological Detection (EMBD) system. As a backward-compatible replacement for the Joint Biological Point Detection System (JBPDS) Identifier, the EMBD Identification Subsystem (IDS) automatically provides confirmatory identification of Biological Warfare Agents (BWAs) in liquid samples. In operation, the EMBD Collector gathers the sample externally and routes it to the IDS via the EMBD Fluid Transfer System (FTS). Please see the attached formal Request for Information (RFI) for full details. | 59% | Market Research | 12/07/2026 |
The Meteorology Branch at White Sands Missile Range (WSMR) requires the procurement of a Scintillometer and required supplies which are fully detailed in the attached Product Description. If you are proposing an equivalent product, please provide adequate documentation supporting the salient characteristics which meet the requirement. | 59% | Combined Synopsis | 11/03/2026 |
SODAR and RASS | 59% | Combined Synopsis | 02/12/2026 |
Additional Details
Solicitation Number
W912CH-26-Q-A072
Archive Date
Sep 25, 2026
Office Address
WARREN, MI, 48397-5000