Notice ID: 419448cdb7db4df79ba9b85b21fa0614Special NoticeArchived
66A Rotary feedthrough for VOiD deposition system
Archived on August 18, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 9:00 AM CDT
- Posted
- July 29, 2026
- Notice type
- Special Notice
- Set-aside
- No Set aside used
- NAICS
- 333912: Air and Gas Compressor Manufacturing
- Agency
- National Aeronautics and Space Administration
Notice details
- Office
- NASA SHARED SERVICES CENTER
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 80NSSC26938965Q
- Notice ID
- 419448cdb7db4df79ba9b85b21fa0614
Description
*PLEASE NOTE* THIS IS NOT A REQUEST FOR QUOTES. ANY PRICE OFFERS RECIEVED WILL NOT BE REVIEWED / ACCEPTED AT THIS TIME. A price quote alone generally does not provide sufficient information to evaluate a vendor's technical capability. See the attached SOW. All correspondence must reference ID# to ensure visibility. Synopsis: NASA/NSSC has a requirement for 66A Rotary feedthrough for VOiD deposition system. NASA/NSSC intends to issue a sole source contract to KURT J LESKER CO, 1925 Route 51 Clairton, Pennsylvania 15025-3681, under the authority of FAR 12.102(a). It has been determined that KURT J LESKER CO is the sole provider of 66A Rotary feedthrough for VOiD deposition system NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 333912. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 9:00 a.m. Central Standard Time on 8/3/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . Primary Point of Contact: Monica Wilson Procurement Assistant monica.d.wilson@nasa.gov Secondary Point of Contact: Karen Artis Contract Specialist karen.l.artis@nasa.gov
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Monica Wilson
Secondary Contact
Karen Artis
Documents
Files (1)
- Download
SATPC0041927 Tab 04 4 SPECS.pdf
126 KBAdded in Special Notice version 3Posted
Lifecycle
- 3Version 3Special NoticeArchivedCurrent
66A Rotary feedthrough for VOiD deposition system
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ). A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED. In accordance with FAR 6.103.1, the Naval Air Warfare Center, Weapons Division, China Lake, intends to award a firm fixed price contract on a sole source basis for: To: Forge Nano Inc. at 12300 Grant st. #110 Thornton, Colorado as the only manufacturer of fluidization ALD systems, which rely on their exclusive, proprietary software. Because the technology and software licenses are strictly proprietary, no other vendor can provide or support this equipment. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES; no solicitation or RFQ will be forthcoming. However, interested parties may identify their interest and capability to respond to this requirement no later than 4:00pm PST 11/2/26. The written response shall reference solicitation number N6893626SIMACQD550000E5500000441 and must provide a clear and concise capability statement to show the ability to perform the required work without compromising the quality, accuracy, reliability and schedule. Written responses to this notice shall be submitted to email: Amy Lamberth amy.s.lamberth.civ@us.navy.mil All vendors must be registered at https://sam.gov/ prior to submitting quotes. It is recommended that all interested parties be aware that processing this additional information may take at least 10-15 days and are proactive in maintaining the SAM registrations in an 'Active' status as the government cannot award an entity without an 'Active' SAM registration. Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information (CUI) or Export Controlled Information. Access to CUI is limited, to a single point of contact (POC) per CAGE code, who is listed as the Data Custodian on the DD 2345 and approved by Defense Logistics Agency (DLA). The DD 2345 must be approved prior to requesting access to CUI in SAM.gov. Contractors are responsible for coordinating with their CAGE code’s Data Custodian POC to request access to CUI. For additional information, visit the DLA website for the Joint Certification Program: https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/. | 60% | Pre-Solicitation | 11/02/2026 |
SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for 2WG S-Band Rotary Joint. NASA/NSSC intends to issue a sole source contract to EVERAXIS AB Torshamnsgatan 30F Kista 164 40 Sweden under the authority of FAR 12.102(a). It has been determined that EVERAXIS AB is the sole provider of 2WG S-Band Rotary Joint. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Wallops Flight Facility (WFF). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 334519. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 12:00 p.m. Central Standard Time on 10/19/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . Primary Point of Contact: (Note from Tiffany on Teams: When posting on SAM.GOV make sure you are adding the Contracting Officer as an alternate point of contact. ****REMOVE THIS SENTENCE PRIOR TO POSTING**** | 56% | Special Notice | 11/02/2026 |
*PLEASE NOTE* THIS IS NOT A REQUEST FOR QUOTES. ANY PRICE OFFERS RECIEVED WILL NOT BE REVIEWED / ACCEPTED AT THIS TIME. A price quote alone generally does not provide sufficient information to evaluate a vendor's technical capability. See the attached SOW. SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for High-precision X-ray beamline slits for integration into a custom-built X-ray reflectometer system. NASA/NSSC intends to issue a sole source contract to JJ X-RAY A/S, Hørsholm 2970 Denmark, under the authority of FAR 12.102(a). It has been determined that JJ X-RAY A/S is the sole provider of High-precision X-ray beamline slits for integration into a custom-built X-ray reflectometer system NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 334516. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 9:00 a.m. Central Standard Time on 11/3/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . Primary Point of Contact: Monica Wilson Procurement Assistant III monica.d.wilson@nasa.gov Alternate Point of Contact: SHARI TRIGG, LEAD CONTRACT SPECIALIST, shari.trigg@nasa.gov | 47% | Special Notice | 11/03/2026 |
This amendment is to address several requests for clarifications associated with our Technical Specifications. Q1. Facility Access and Rigging: The specifications require installation at the R&D plateau on the NETL Pittsburgh site. Does the specific facility have a loading dock capable of receiving standard freight, and is there a clear, at-grade, or freight-elevator-accessible path to the final installation room with adequate door clearances for a 100 kW system? A1: NETL has a clear path to the final installation area with adequate door clearances for a 100 kW system. Q2. Utility Proximity: The furnace requires a 480-volt, three-phase, 60 Hz power supply supporting an overall power of at least 100 kW. Is the necessary hardwire drop or disconnect already existing within the immediate footprint of the intended installation area, or will the contractor be responsible for routing power from a distant sub-panel? A2: NETL is responsible for installing all necessary hardwire drops or disconnects. Q3. Gas Supply and Exhaust: The system requires a fueled incinerator torch to combust organic outgassing. Will the Government supply the necessary process and sweep gases (e.g, Argon, Nitrogen, Propane/Natural gas) via existing facility lines, and is there an existing facility exhaust or fume hood integration point for the torch output? A3: NETL is responsible for installing all necessary gases, gas lines, and venting lines. Q4. Lead Times and Compliance: Given that Brand Name or Equal highly customized vacuum furnaces built to NRTL, UL 508A, and NFPA 79 standards often have commercial lead times exceeding 6 to 9 months, will the anticipated RFQ allow for standard commercial lead times? Additionally, can you confirm if this procurement will be subject to the Trade Agreements Act (TAA) or strict Buy American Act (BAA) provisions? A4: NETL will accept standard commercial lead times for this procurement. This procurement will be subject to the FAR 52.225-5 Trade Agreements Act (TAA). | 46% | Market Research | 11/16/2026 |
Building Filters / Submission Requirements and Technical Compliance - Submission Method: Only bids submitted through the official solicitation portal will be accepted. Emailed submissions will not be considered.Brand Name or Equal: This solicitation is brand name or equal. If quoting an equal product, the bidder must demonstrate that the product meets or exceeds all salient physical, functional, or performance characteristics listed in the description.Mandatory Documentation: A completed Buy American form is required. Bids submitted without a completed form may be deemed non-responsive and rejected.Shipping and Invoicing: Prices must include all shipping, packaging, and inspection charges. A single shipment and invoice are required. Multiple shipments require prior written approval from the WDTC S2P2 Point of Contact (POC). | 46% | Combined Synopsis | 11/16/2026 |
Additional Details
Solicitation Number
80NSSC26938965Q
Archive Date
Aug 18, 2026
Office Address
STENNIS SPACE CENTER, MS, 39529