Notice ID: c5ed3ac3874f47f8a09641cb0911b6eaAward NoticeAwarded
66--Purchase equipment to extrude material from high strength steel and nickel-based super alloys.
Awarded on September 22, 2022. Full description on SAM.gov.
Awarded tounder 89243322PFE000578 (source: SAM.gov award notice)• $1.7M
Overview
- Posted
- September 22, 2022
- Notice type
- Award Notice
- NAICS
- 333249: Classification Not Available
- Agency
- Department of Energy
Notice details
- Place of performance
- Albany, OR, 97321
- Last updated
- Dec 2, 2025
- Award date
- Sep 22, 2022
- Award amount (SAM.gov award notice)
- $1.7M
Identifiers
- Solicitation number
- 89243322QFE000329
- Notice ID
- c5ed3ac3874f47f8a09641cb0911b6ea
- Award number (PIID)
- 89243322PFE000578
Description
Purchase of Macrodyne 900 Ton Extrusion Press Paul Jablonski is the technical contact, (541) 967-5982; Paul.Jablonski@netl.doe.gov
Award Overview
Award Number
89243322PFE000578
Award Amount (SAM.gov award notice)
$1.7M
Award Date
Sep 22, 2022
Awardee
Awardee UEI
ZZH3DJW9BM29
Original Solicitation
Notice ID: c5ed3ac3874f47f8a09641cb0911b6ea
Posted Date: Sep 22, 2022
Original Response Deadline: Not specified
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
89243322QFE000329- Combined Synopsis
- Awarded
This opportunity has been awarded.
- Combined SynopsisAug 25, 2022
Request for Quotation: Extrusion Equipment
- AwardedCurrentSep 22, 2022
66--Purchase equipment to extrude material from high strength steel and nickel-based super alloys.
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Brookhaven Science Associates, LLC (herein known as “BSA”), operator of Brookhaven National Laboratory (BNL) under a Prime Contract (DE-SC0012704) with the U.S. Department of Energy (DOE), herewith solicits your quote for an Ultra-High Vacuum Suitcase. Please see attached Combined Synopsis/Solicitation 485362 and its enclosures for details. | 68% | Combined Synopsis | 11/20/2026 |
This flash sinter-forging technology from Los Alamos National Laboratory enables manufacturers to produce dense, net- or near-net-shape ceramic components in minutes rather than hours or days, while cutting energy consumption by up to 90% and significantly reducing production costs. By simultaneously applying electric current, heat, and mechanical pressure, the process consolidates shaping, densification, and finishing into a single, compact operation, eliminating much of the costly machining typically required for hard, brittle ceramics. The result is faster throughput, lower capital and operating expenses, smaller equipment footprints, and improved sustainability—while also enabling superior microstructural control and access to advanced or difficult-to-sinter materials. How it Works: The technology works by placing ceramic powder into a specially designed die and then applying three inputs at once: an electric field and current, moderate external heating, and mechanical pressure. As electricity passes directly through the ceramic, it rapidly heats the material from the inside, dramatically accelerating the bonding of particles while keeping overall furnace temperatures lower than conventional methods. At the same time, controlled pressure compresses and shapes the material as it densifies, allowing the part to reach high density while already close to its final geometry. Sensors and software coordinate the electrical, thermal, and mechanical conditions in real time, enabling precise control of the process and material behavior. By integrating electrical activation and forging into a single, tightly controlled step, the system achieves fast densification and shaping that would otherwise require multiple, time-intensive processing stages. Key Advantages: Minutes-long processing: Produces dense ceramic parts far faster than conventional sintering methods. Up to ~90% energy reduction: Direct electrical heating dramatically lowers energy use and operating costs. Near-net shaping: Forms parts during densification, greatly reducing or eliminating costly post-machining. Lower total manufacturing cost: Combines forming, sintering, and finishing into a single streamlined step. Advanced material capability: Enables difficult-to-sinter and next-generation ceramics with controlled microstructures. Compact and scalable: Smaller footprint and lower power requirements support deployment from R&D to industrial production. Market Applications: Semiconductor manufacturing (high-purity ceramic components, fixtures, insulators, wear parts) Aerospace and defense (high-temperature components, protective structures, lightweight ceramic parts) Energy and nuclear (fuel cells, solid-state batteries, nuclear and high-temperature energy ceramics) Medical and dental (implants, prosthetics, precision ceramic components) Industrial and manufacturing (wear-resistant parts, tooling components, structural ceramics) Additive and advanced manufacturing (post-processing of 3D-printed ceramic parts, rapid densification of complex shapes) Development Status: TRL 3 US Patent No. 12,465,971 LA-UR-26-23345 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | 67% | Special Notice | 05/11/2026 |
This amendment is to address several requests for clarifications associated with our Technical Specifications. Q1. Facility Access and Rigging: The specifications require installation at the R&D plateau on the NETL Pittsburgh site. Does the specific facility have a loading dock capable of receiving standard freight, and is there a clear, at-grade, or freight-elevator-accessible path to the final installation room with adequate door clearances for a 100 kW system? A1: NETL has a clear path to the final installation area with adequate door clearances for a 100 kW system. Q2. Utility Proximity: The furnace requires a 480-volt, three-phase, 60 Hz power supply supporting an overall power of at least 100 kW. Is the necessary hardwire drop or disconnect already existing within the immediate footprint of the intended installation area, or will the contractor be responsible for routing power from a distant sub-panel? A2: NETL is responsible for installing all necessary hardwire drops or disconnects. Q3. Gas Supply and Exhaust: The system requires a fueled incinerator torch to combust organic outgassing. Will the Government supply the necessary process and sweep gases (e.g, Argon, Nitrogen, Propane/Natural gas) via existing facility lines, and is there an existing facility exhaust or fume hood integration point for the torch output? A3: NETL is responsible for installing all necessary gases, gas lines, and venting lines. Q4. Lead Times and Compliance: Given that Brand Name or Equal highly customized vacuum furnaces built to NRTL, UL 508A, and NFPA 79 standards often have commercial lead times exceeding 6 to 9 months, will the anticipated RFQ allow for standard commercial lead times? Additionally, can you confirm if this procurement will be subject to the Trade Agreements Act (TAA) or strict Buy American Act (BAA) provisions? A4: NETL will accept standard commercial lead times for this procurement. This procurement will be subject to the FAR 52.225-5 Trade Agreements Act (TAA). | 55% | Market Research | 11/16/2026 |
THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ). A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED. In accordance with FAR 6.103.1, the Naval Air Warfare Center, Weapons Division, China Lake, intends to award a firm fixed price contract on a sole source basis for: To: Forge Nano Inc. at 12300 Grant st. #110 Thornton, Colorado as the only manufacturer of fluidization ALD systems, which rely on their exclusive, proprietary software. Because the technology and software licenses are strictly proprietary, no other vendor can provide or support this equipment. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES; no solicitation or RFQ will be forthcoming. However, interested parties may identify their interest and capability to respond to this requirement no later than 4:00pm PST 11/2/26. The written response shall reference solicitation number N6893626SIMACQD550000E5500000441 and must provide a clear and concise capability statement to show the ability to perform the required work without compromising the quality, accuracy, reliability and schedule. Written responses to this notice shall be submitted to email: Amy Lamberth amy.s.lamberth.civ@us.navy.mil All vendors must be registered at https://sam.gov/ prior to submitting quotes. It is recommended that all interested parties be aware that processing this additional information may take at least 10-15 days and are proactive in maintaining the SAM registrations in an 'Active' status as the government cannot award an entity without an 'Active' SAM registration. Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information (CUI) or Export Controlled Information. Access to CUI is limited, to a single point of contact (POC) per CAGE code, who is listed as the Data Custodian on the DD 2345 and approved by Defense Logistics Agency (DLA). The DD 2345 must be approved prior to requesting access to CUI in SAM.gov. Contractors are responsible for coordinating with their CAGE code’s Data Custodian POC to request access to CUI. For additional information, visit the DLA website for the Joint Certification Program: https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/. | 53% | Pre-Solicitation | 11/02/2026 |
lab equipment | 43% | Combined Synopsis | 07/24/2026 |
Additional Details
Solicitation Number
89243322QFE000329
Archive Date
Oct 7, 2022
Office Address
MORGANTOWN, WV, 26507