Repair of JTE Antenna NSN: 5985-01-599-9815
Archived on January 30, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM MST
- Posted
- January 13, 2026
- Notice type
- Solicitation
- Set-aside
- No Set aside used
- NAICS
- 811210: Electronic and Precision Equipment Repair and Maintenance
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- AIR FORCE MATERIEL COMMAND.AIR FORCE SUSTAINMENT CENTER.FA8250 AFSC PZAAA
- Last updated
- Nov 4, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- FA825026Q0091
- Notice ID
- 59e4a9ee42704e7cbc4644282a800e96
Description
Item Description: JTE Antenna
NSN: 5985-01-599-9815 FD
Part Number: 200532033-1, 0242-800
Quantity: 1
Response Date: 05 January 2026
SCOPE OF WORK: For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services, required to inspect and, if necessary, restore to serviceable condition. Services to be performed will not be essential in a crisis situation. Work consists of one of two efforts: Test, teardown, and evaluation (TT&E) only or TT&E and repair.
TEST, TEARDOWN, AND EVALUATION: The contractor shall perform visual, mechanical and electrical testing of the end item, reusable or replacement component parts, and materials according to the schedule in the contract to determine the condition of the end item. Upon completion of this task, all of the components of the end item requiring repair or replacement will be identified by part number, NSN (if applicable), nomenclature, and location in the assembly. This information will be reported in writing to the Procurement Contracting Officer (PCO)/ Defense Contract Management Agency (DCMA) Administrative Contracting Officer (ACO) and, if necessary, approval to repair will be negotiated. If no further repair is required, the asset must be returned in serviceable like new condition.
REPAIR: (NTE) The contractor shall perform the repair or replacement of all failed parts and components. Each end item must be cleaned, configured, refinished, and tested to meet the original specifications of the end item. The end item shall be returned in serviceable like new condition.
***RESTRICTED TO PREQUALIFIED SOURCES***
Qualification Requirements: See FAR Part 52.209-1 The requirements of FAR 9.202(a) apply. Sources must be qualified prior to being considered for award. Interested vendors that have not been previously approved for this acquisition must submit a Source Approval Request (SAR) package to the Source Development Small Business Office or the Contracting Officer. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification in the attached Repair Qualification Requirements (Section C document). If requesting access to the technical data package (TDP), please email the contract specialist and contracting officer with a current copy of your DD2345 and JCP printout.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (11)
- Download
ATTACHMENT_5_SPI.pdf
1.9 MBAdded in Solicitation version 1Posted - Download
ATTACHMENT_10_CDRLs.pdf
805 KBAdded in Solicitation version 1Posted - Download
ATTACHMENT_9_RQR.pdf
198 KBAdded in Solicitation version 1Posted - Download
ATTACHMENT_4_PACKAGING_SOW.pdf
139 KBAdded in Solicitation version 1Posted - Download
ATTACHMENT_3_PACKAGING_REQUIREMENTS.pdf
77 KBAdded in Solicitation version 1Posted - Download
ATTACHMENT_7_RDL.pdf
56 KBAdded in Solicitation version 1Posted - Download
ATTACHMENT_8_IUID.pdf
59 KBAdded in Solicitation version 1Posted - Download
ATTACHMENT_2_ITEM_DESCRIPTION.pdf
58 KBAdded in Solicitation version 1Posted - Download
ATTACHMENT_6_PWS.docx
62 KBAdded in Solicitation version 1Posted - Download
ATTACHMENT_1_CAVAF.docx
52 KBAdded in Solicitation version 1Posted - Download
FA825026Q0091.pdf
138 KBAdded in Solicitation version 1Posted
Lifecycle
- 1Version 1SolicitationArchived
Repair of JTE Antenna NSN: 5985-01-599-9815
- 2Version 2SolicitationArchived
Repair of JTE Antenna NSN: 5985-01-599-9815
- 4Version 4SolicitationArchivedCurrent
Repair of JTE Antenna NSN: 5985-01-599-9815
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5998-01-598-5645 & NSN: 5998-01-598-5644 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): NORTHROP GRUMMAN SYSTEMS CORPORATION CAGE: 1L4J7 ADDRESS: 1740 Wehrle DR Buffalo, New York 14221-7032, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 120 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development. | 100% | Market Research | 12/07/2026 |
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5840-01-659-4499 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): APPLIED SYSTEMS ENGINEERING INC CAGE: 3Z966 ADDRESS: 7510 Benbrook PKWY Benbrook, Texas 76126-2112, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 320 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development. | 100% | Market Research | 12/07/2026 |
The contractor shall provide all management, tools, equipment, and labor necessary to test, evaluate, repair, and restore F-16 UCADC components to a serviceable Condition Code A in accordance with OEM specifications, approved Technical Orders (TOs), and USAF engineering dispositions. Cosmetic restoration to like-new appearance is not required. These are Just-In-Time (JIT) unprogrammed repairs to maintain operational readiness and meet required turnaround times.Applicable Items: NSN 5998-01-399-5953 | P/N 8518945-902 | Circuit Card Assembly NSN 5998-01-399-8603 | P/N 8518948-903 | Circuit Card Assembly NSN 5998-01-399-8605 | P/N 8518951-902 | Circuit Card Assembly NSN 6130-01-410-9195 | P/N 8518938-902 | Power Supply Assembly NSN 6685-00-149-1026 | P/N 4007515-903 | Pressure Transducer NSN 6685-00-259-3013 | P/N 4007515-902 | Pressure Transducer NSN 5998-01-406-3089 | P/N 8518937-901 | Circuit Card Assembly NSN 5998-01-406-3087 | P/N 8518983-903 | Circuit Card AssemblyFor further details, please see the attached sources sought synopsis PDF. | 80% | Market Research | 11/20/2026 |
This requirement is to obtain a new 5 year IDIQ non-commercial requirements repair services contract to procure repair and refurbishment total of best estimate 50 Phase Shifter Driver (PSDU) or 10 per year. The PSDU which is part of the Antenna in the AN/APG-68 Radar used on the F-16 Aircraft. A commensurate level of expertise, not limited to signal conditioning, high current op amps, and surface mount parts are required to qualify for this repair, and potential sources must demonstrate capability. All work performed by the contractor shall comply with the specification and technical data requirements set forth in the Performance Based Work Specification (PWS) and by OEM drawings. Items returned to serviceable condition are required to pass the Acceptance Test procedures (ATP) identified in drawing 562R218H01 paragraph 4.2.2. The PSDUs are military unique and is not a commercial part or non-developmental items. Standards required are in the engineering drawings 562R218H01 cited in RDL. | 78% | Solicitation | 02/23/2026 |
The Department of the Air Force, Air Force Life Cycle Management Center (AFLCMC/ESKA), Robins Air Force Base, Georgia, intends to award a five (5) year, Firm-Fixed-Price (FFP) Requirements Indefinite Delivery Contract (IDC) on a sole-source basis to Crane Electronics, Inc. (CAGE: 09062) for the repair and return of system components in support of the AN/ALQ-131 Electronic Warfare (EW) systems for Foreign Military Sales (FMS) customers. The statutory authority permitting other than full and open competition is 10 U.S.C. 3204(a)(1), as implemented by Revolutionary FAR Overhaul, RFO 6.103-1, "Only one responsible source and no other supplies or services will satisfy agency requirements." The Original Equipment Manufacturer (OEM), Northrop Grumman Systems Corporation, retains proprietary ownership of all technical data and has officially designated its sister organization, Crane Electronics, as the sole authorized repair source. As a result, Crane is uniquely qualified as the only source that possesses the intellectual property, specialized test equipment, and engineering expertise necessary to meet the Government's requirements. REQUIREMENT SCOPE AND COMPONENTS This requirement is for the procurement of Specialized Aircraft Support Services (SASS), including the Test, Tear-Down, and Evaluation (TT&E), repair, modernization, and condemnation of critical system components for the AN/ALQ-131 Electronic Countermeasure (ECM) pods in support of FMS customers. The specific National Stock Numbers (NSNs) and their respective Best Estimate Quantities (BEQs) are as follows: Band 3 High Voltage Power Supply (Repair/Modification) -- NSN: 6130-01-620-4346EW -- Sub-NSNs: 6130-01-492-4527EW and 6130-01-042-9844EW -- BEQ: 2 per year (Base and all ordering periods) RX Processor -- NSN: 6130-01-603-6656EW -- BEQs: 3 in the Base Period, and 2 for each subsequent ordering period Band 4/5 High Voltage Power Supply -- NSN: 6130-01-565-7448EW -- BEQ: 5 per year (Base and all ordering periods) Band 4 Low Voltage Supply -- NSN: 6130-01-220-2914 -- BEQs: 4 in the Base Period, 4 in Ordering Period 1, 4 in Ordering Period 2, and 2 in each subsequent period Condemnation (Applicable to all above NSNs) -- NSN: Multiple -- BEQ: 2 per year (Base and all ordering periods) PERIOD OF PERFORMANCE The contract structure consists of five (5) one-year ordering periods. The total contract period of performance will not exceed five and a half (5.5) years, which includes the authority under FAR 52.217-8, Option to Extend Services. SUBMISSION INSTRUCTIONS This publication is a pre-solicitation notice of intent only and is not a request for competitive proposals. However, in accordance with FAR Part 5 requirements, any responsible source that believes it can meet this requirement may submit a Capability Statement, which shall be considered by the agency. Capability statements must provide clear and convincing evidence that the source possesses immediate access to the required proprietary OEM technical data, drawings, and specialized test equipment. Submit capability statements electronically to the Contracting Point of Contact listed below no later than 4:00 PM Eastern Time on 5 November 2026. CONTRACTING OFFICE CONTACT INFORMATION Agency: Department of the Air Force Command: Air Force Life Cycle Management Center (AFLCMC) Office: AFLCMC/ESYK, Electronic Warfare Contracting Branch Address: Robins AFB, GA 31098 Point of Contact: Thomas Royal, Contracting Officer Email: thomas.royal.1@us.af.mil | 75% | Pre-Solicitation | 11/05/2026 |
Additional Details
Solicitation Number
FA825026Q0091
Archive Date
Jan 30, 2026
Office Address
HILL AFB, UT, 84056-5825