GovChime
Notice ID: e1cfae07f28e4ab88c8e0abefe0d3752Sources SoughtArchived

Guatemala Bell Flight Training Device

Archived on December 19, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM EST
Posted
November 18, 2025
Notice type
Sources Sought
Set-aside
No Set aside used
NAICS
333310: Commercial and Service Industry Machinery Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC-ORL.W6QK ACC-ORLANDO
Place of performance
Orlando, Florida
Last updated
Nov 6, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W900KK-26-Guatemala-Bell-FTD
Notice ID
e1cfae07f28e4ab88c8e0abefe0d3752

Description

Amendment 1 - This amendment is to update the requirement to remove any reference to the multiple Bell A/C configurations. The response date remains the same, 18 December 2025 by 12:00 PM EST.

SOURCES SOUGHT NOTICE

Guatemala Bell Flight Training Device

PEO STRI - Sources Sought Notification - Foreign Military Sales (FMS), Guatemala’s Bell Flight Training Device

PURPOSE

PEO STRI is seeking information regarding the relevant experience and capabilities from industry partners interested in performing this potential requirement. This information will be used to:

  • Determine which businesses exist that can meet the requirement
  • Assess the market's technical capabilities
  • Determine rough order of magnitude on cost and schedule
  • Identify commercial practices and solutions

INTRODUCTION

US Army Contracting Command Orlando (ACC-O) is issuing this Sources Sought synopsis as a means of conducting market research to identify potential sources having interest and industry technologies available to provide: a) one (1) non-motion Flight Training Device (FTD) for the Bell 412 utility helicopter; b) delivery, installation, commissioning at CACEN (Guatemala), and c) operator/instructor training, with costs covering the simulator, training, and installation. The FTD shall provide fidelity sufficient to permit logging of simulator/instrument/training time under the applicable civil aviation authority requirements, consistent with the device’s qualified level and permitted credits. Vendors shall identify the target qualification basis and level and support initial qualification by the authority. The required simulator will be designed to enhance realism through motion cueing, offering realistic flight experience without the expense and complexity of a full-motion system.

U.S. Army Program Executive Office for Simulation, Training and Instrumentation (PEO STRI) International Programs Office (IPO) is seeking information and data for potential procurement of the capabilities previously mentioned on behalf of the country of Guatemala.

The results of this market research will contribute to determining the method of procurement if a requirement materializes. Based on the responses to this Sources Sought Notice/market research, this requirement may be set-aside for small businesses (in full or in part) or procured through full and open competition. Multiple awards may be made. All small business set-aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding submissions.

REQUIRED CAPABILITIES

The Government requires:

1. One (1) non-motion Flight Training Device (FTD) for Bell 412.

  1.1 Provide a non-motion FTD for Bell 412. Vendors shall describe the high-level design concept, including anticipated steps, tools, personnel requirements, and expected differences in hardware/software based on their experience with similar systems. Detailed design steps will be finalized during the design phase.

 1.2 Devices and controls (cyclic, collective, pedals, instrument panels, avionics) shall provide fit, form, and function consistent with the target qualification level identified by the vendor for Bell 412 configuration.

 1.3 Software and physical controls shall support Bell 412 operations, including normal, abnormal, and emergency procedures.

 1.4 Visual Database Requirement

         1.4.1 The FTD shall include a commercial visual database encompassing the entirety of Guatemala, with high-resolution  terrain, obstacles, and cultural features. The database must include at least five airports in high definition. Vendors shall describe the level of detail, resolution, and features of the visual database, including support for night operations, weather effects, and compatibility with NVG training. Vendors should also specify the process for updating the database to reflect changes in terrain, obstacles, or procedures.

 1.5 Provide an Instructor/Operator Station (IOS) with basic scenario control (start/reposition, time-of-day, weather presets, simple failures) and basic data capture/playback for debrief. Advanced analytics are not required.

 1.6 Provide documentation: Operator and Instructor manuals; Maintenance manual; As‑built configuration baseline; Spares/consumables list; Continuing qualification procedures aligned to the proposed qualification standard/authority.

 1.7 Training

      1.7.1 Provide training covering all aspects of operation of the training device, basic maintenance tasks, and IOS usage. Training will primarily be conducted in Spanish, with no requirement for English language training. However, there is a pool of personnel proficient in English who may be considered for additional training requirements.

      1.7.2 The Concept of Operations (CONOPS) for this simulator centers on two primary objectives:

               1. Proficiency Training: To ensure pilots maintain and enhance their skills in normal, abnormal, and emergency helicopter operations.

               2. Specialized Operations: To train pilots for specific missions, including:

                      a. Bambi Bucket Procedures: For firefighting and water-dropping operations.

                      b. Close Air Support (CAS): For tactical operations requiring precision and coordination.

The simulator will be used to develop skills required to respond to helicopter emergencies and conduct specialized operations. Vendors should describe how their solution supports these objectives, including the ability to simulate emergency scenarios and specialized mission profiles.

  1.8 Qualification for training credit

      1.8.1 Vendors shall identify: (a) the civil aviation authority they propose to qualify under, (b) the qualification standard to be applied, (c) the intended FTD level, and (d) the specific training credits permitted by that authority at that level (e.g., instrument procedures, normal/abnormal/emergency procedures). Devices that cannot be qualified to permit logging of simulator/instrument/training time as allowed by the authority are unacceptable.

  1.9 Optional integrated motion/acceleration cueing (not a full‑motion platform)

      1.9.1 Vendors propose an integrated motion/acceleration cueing system for the Bell 412 FTD that is explicitly designed so as not to constitute a full‑motion platform and preserves the device’s FTD classification. Describe the cueing architecture and components, travel/force/frequency limits, washout/algorithm approach, synchronization with visual/audio systems, safety and fault‑management features, maintenance impacts, and any expected effects on qualification or training credit.

2. Installation, facilities, and acceptance at CACEN (Guatemala):

    2.1 Delivery, installation, and commissioning at CACEN; minimal facility modifications are preferred. Vendors should state footprint, weight, standard power (110/220V), and basic HVAC requirements. The cost of installation, delivery, and commissioning is expected to be included within the total cost. Vendors should ensure their submissions account for these associated costs.

    2.2 On-site acceptance testing

3. Written responses to this announcement should consist of the following:

    3.1 Your firm's degree of familiarity and specific experience with implementation of training solutions to meet the training requirements.

    3.2 Resources available to develop, produce, deliver, install, and commission one (1) Bell 412 non-motion FTD, including training and documentation; and, if proposed, an integrated motion/acceleration cueing system and a Bell 412 desktop trainer.

    3.3 Your estimated time frame from contract award to final delivery.

    3.4 Your total cost associated with this effort.

    3.5 Your resources available should address production, sourcing, personnel, shipping, delivery, and 6 months support (repair and return).

4. An itemized Rough Order of Magnitude cost for each requirement listed above.

    4.1 Vendors shall also provide a separate, itemized ROMs:

        4.1.1 Non-motion FTD: Include all requirements for the Bell 412 non-motion FTD, Guatemala visual region (with at least five high-definition airports), Instructor/Operator Station (IOS), optional NVG, optional Bambi Bucket procedural module, optional CAS procedural scenario pack, Spanish training, delivery/installation, spares/consumables, and six-month support.

        4.1.2 FTD with an integrated motion/acceleration cueing system (not a full-motion platform): Include the same features and capabilities as above, plus the proposed cueing system; break out hardware, software, integration/tuning, safety features, and any facility impacts.

       4.1.3 Desktop Trainer: Include all requirements for a cost-effective desktop trainer alternative to the FTD. At a minimum, include: base desktop trainer (Bell 412), Guatemala visual region (with at least three high-definition airports), Instructor/Operator Station (IOS), optional NVG, optional Bambi Bucket procedural module, optional CAS procedural scenario pack, Spanish training, delivery/installation, spares/consumables, and six-month support.

SPECIAL REQUIREMENTS

Any resulting contract is anticipated to have a security classification level of (Not Applicable). Any resulting contract shall be compliant with the specialty metals restriction of the Berry Amendment (10 U.S.C. 2533a and 2533b) in accordance with DFARS clauses 252.225-7008 and 252.225-7009.

ELIGIBILITY

The applicable NAICS code for this requirement is 333310 (Commercial and Service Industry Machinery Manufacturing) with a Small Business Size Standard of 1,000 Employees. The Product Service Code (PSC) is 6910 (Training Aids).

*NOTE 01:  The current SBA Table of Small Business Size Standards was updated 17 March 2023; since the beginning of 2022, the SBA has regularly updated the table to account for inflation.  Businesses must update their SAM.gov profiles in order to have their small business status reflects the most current small business size standards.  Until updated, the SAM profiles will continue to display the small business status under outdated size standards.

*NOTE 02: In accordance with 13 C.F.R. 121.104, the current calculation for dollar (monetary) value based NAICS codes is average total receipts over the last five (5) completed fiscal years

*NOTE 03:  In accordance with 13 C.F.R. 121.106, the current calculation for employee based NAICS codes is average number of employees used for each pay period for the preceding completed 24 calendar months. 

SUBMISSION DETAILS

Interested businesses should submit a brief capabilities statement package (no more than ten 8.5 X 11-inch pages, font no smaller than 10 point) demonstrating ability to provide the products/systems listed in this Technical Description as outlined in Item #3. Documentation should be in bullet format. No phone or email solicitations with regards to the status of the RFP will be accepted prior to its release.

Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to Ms. Patricia Ward, Contract Specialist, Patricia.ward2.civ@army.mil and Mrs. Tanya Caceres, APM, tanya.e.caceres.civ@army.mil in either Microsoft Word (.docx) or Portable Document Format (PDF), via email no later than 12:00 Eastern Standard Time (EST) on 18 December 2025 and reference this sources sought number in subject line of e-mail and on all enclosed documents. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL.

If your organization has the potential capacity to provide the required products/systems, please provide the following information: 1) Organization name, address, primary points of contact (POCs) and their email address, FAX, Web site address, telephone number, and type of ownership for the organization; and 2) Tailored capability statements addressing the requirements of this notice, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements.

All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government.

*NOTE (LIMITATIONS ON SUBCONTRACTING):  If you are a small business interested in being the prime contractor for this effort, please be advised that FAR clause 52.219-14 (Limitations on Subcontracting) (DEVIATION 2021-O0008) was updated in September 2021.  The current clause adds the definition of “Similarly Situated Entity” and the 50% calculation for compliance with the clause.  Small business prime contractors may now count “first tier subcontractor” work performed by a “Similarly Situated Entity” as if it were performed by the prime contractor itself. 

To assist in our market research and set-aside determination for this effort, if you are a small business interested in priming this effort and plan to utilize a “Similarly Situated Entity” to meet the Limitations on Subcontracting requirements, please identify the name & Unique Entity ID/CAGE Code of the specific firm(s) you intend to partner/subcontract with to meet the requirements as well as their SB size status under the NAICS that you as the prime would assign for their workshare.  Information regarding any planned “Similarly Situated Entity” should be included in answering any questions outlined in the SSN in order to assist the Government's capability determination.

DISCLAIMER

THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (2)

  • SSN_Guatemala_Bell_Flight_Training_Device_10NOV2025.pdf

    208 KBAdded in Sources Sought version 4Posted
    Download
  • Amendment 1_SSN_Guatemala_FTD Bell 412_18NOV2025.pdf

    183 KBAdded in Sources Sought version 4Posted
    Download

Lifecycle

  1. 1
    Version 1Sources SoughtArchived

    Guatemala Bell Flight Training Device

    Notice a9d084c045bd4254b3f443bb91d4313d on SAM.gov

  2. 2
    Version 2Sources SoughtArchived

    Guatemala Bell Flight Training Device

    Notice 8232419b958f4f61b161d665901f3f22 on SAM.gov

  3. 4
    Version 4Sources SoughtArchivedCurrent

    Guatemala Bell Flight Training Device

    Notice e1cfae07f28e4ab88c8e0abefe0d3752 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Pre-Solicitation Notice The Army Contracting Command – Aberdeen Proving Ground (ACC-APG) Orlando Division is releasing the draft SOW, SPEC and Section L & M for industry feedback as part of continuing industry engagement for the Royal Saudi Land Forces (RSLF) CH-47F Chinook and UH-60M Black Hawk Flight Training Devices (FTDs) requirement. Please be advised that the system specifications (SPECs) are restricted and only releasable to authorized U.S. contractors. To initiate a release, a formal request should be submitted to the points of contact listed below. The attached draft documents are provided solely to obtain industry feedback. These documents are preliminary, are subject to change without notice, and do not constitute a solicitation or commitment by the Government. The available funding for this requirement is $58M. This notice is not a solicitation, RFP, or commitment by the Government, and it does not authorize interested parties to incur costs. The Government is under no obligation to issue a solicitation or award a contract as a result of this notice. Pre-Solicitation Conference The Government will conduct a pre-solicitation conference for interested industry representatives on 07 Dec 2026 / 9:30 – 11:30 AM EST in Partnership II Building. The purpose of the conference is to provide prospective offerors with an overview of the anticipated requirement and an opportunity to ask clarifying questions before release of the solicitation. Industry participants must RSVP no later than 30 November 2026 / 3:00PM EST. Include the Notice ID number in the subject line of your email request. Provide the following information Company Name: Unit Entity Identification (UEI) and Cage: Business Size: Attendee names and titles, email addresses, telephone number Email Point of Contact: Ms. Rosa Rivera, Contract Specialist, rosa.rivera53.civ@army.mil and Ms. Purvi Kapadia, Alternate Contract Specialist, purvi.kapadia.civ@army.mil Mr. David Coe, Assitan Program Manager, david.e.coe.civ@army.mil Interested parties are encouraged to submit questions in writing to the Government before the pre-solicitation conference. Questions should be emailed no later than 3:00PM on 18 November 2026 EST. The Government may address submitted questions during the conference and may accept additional questions during the event as time permits. Any Government responses provided during the conference are informational only. Official responses, if any, will be provided through the formal solicitation process or other authorized written notice.
95%
Pre-Solicitation11/18/2026
U.S. Army Capability Program Executive Simulation, Training, Test and Threat (CPE ST3) - Sources Sought Notification - Foreign Military Sales (FMS), Guatemala’s Bell EPX Flight Training Device PURPOSE CPE ST3 is seeking information regarding the relevant experience and capabilities from industry partners interested in performing this potential requirement. This information will be used to: Determine rough order of magnitude on cost and schedule Identify commercial practices and solutions Determine contractor capabilities that can meet the requirement INTRODUCTION See attached documents: SSN_Guatemala_FTD Bell EPX_Final_10.21.2026 Guatemala Bell 412 EPX FTD Technical Requirements_10.21.2026
95%
Market Research11/14/2026
The U.S. Department of Justice, Drug Enforcement Administration (DEA) Aviation Division (SG) has a requirement for two (2) modern, non-motion Federal Aviation Administration (FAA) approved Flight Training Devices (FTD). One FTD shall be representative of a Cessna T206H with a Garmin G1000 Avionics System and the second FTD shall be representative of a Beechcraft King Air B300 with a Garmin G1000 Avionics System.
83%
Combined Synopsis11/27/2026
Amendment 2- This amendment extends the due date for responses to 25 August 2026. Please see attached Request for Follow-on Information for the Royal Saudi Land Forces CH-47F AND UH-60M Flight Training Devices, dated 11Aug2026. Amendment 1 - This amendment extends the due date for responses to 29 June 2026. Please see attached Sources Sought Notice for the Royal Saudi Land Forces CH-47F AND UH-60M Flight Training Devices.
81%
Special Notice08/25/2026
78%
AwardedOpen

Additional Details

Solicitation Number

W900KK-26-Guatemala-Bell-FTD

Archive Date

Dec 19, 2025

Office Address

ORLANDO, FL, 32826-3224