B2 and B1 Retrofit Material Kits and Installs
Archived on October 14, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 11:59 PM EDT
- Posted
- September 29, 2026
- Notice type
- Presolicitation
- NAICS
- 336411: Aircraft Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVAIR.NAVAIR HQS.NAVAL AIR SYSTEMS COMMAND
- Place of performance
- 0, Maryland, 20670
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- N00019-26-RFPREQ-WPM262-0263
- Notice ID
- d393b11d3a2d40f2ba6e606fd1fc6677
Description
The Naval Air Systems Command (NAVAIR), Patuxent River, MD, intends to enter into sole source negotiations and subsequently award a Firm Fixed Price (FFP) modification under BOA N00019-25-G-0003 Delivery Order N00019-26-F-1093. The anticipated modification is for the procurement of material and labor needed to retrofit two (2) air vehicles (B-2 and B-1) to an IFC-4.2.3 configuration. Contract award is anticipated for the fourth quarter of fiscal year 2027. The anticipated period of performance will be for approximately 66 months.
This synopsis is published for informational purposes only. (THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS). This requirement will be procured in accordance with FAR 6.103-1, only one responsible source and no other supplies or services will satisfy agency requirements. NGSC is the sole designer, developer, manufacturer, integrator, and producer of the MQ-4C Triton air vehicles and ground stations. Therefore, NGSC is the only source with the requisite knowledge of the Triton design, operation, and maintenance to successfully provide the necessary engineering, systems integration, and sustainment support. Unless otherwise stated herein, no formal request for proposal or additional written information is currently available. A determination by the Government not to compete is solely within the discretion of the Government. This synopsis is published for information purposes only.
Subcontracting opportunities should be sought directly from NGSC.
IMPORTANT ADDITIONAL INFORMATION FOR INTERESTED PARTIES: There are no commitments by the Government to issue any solicitations, make an award, or to be responsible for any monies expended by any interested parties before award of a contract for the efforts mentioned above. Information provided herein is subject to change and in no way binds the Government to solicit for or award a contract. No telephone responses will be accepted.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
- 3Version 3PresolicitationArchived
B2 Retrofit Material Kit and Install
- 4Version 4PresolicitationArchived
B2 Retrofit Material Kit and Install
- 5Version 5PresolicitationArchived
B2 Retrofit Material Kit and Install
- 7Version 7PresolicitationArchivedCurrent
B2 and B1 Retrofit Material Kits and Installs
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Naval Air Systems Command (NAVAIR), Patuxent River, MD, intends to negotiate and award an Order under a Basic Ordering Agreement (BOA) with General Atomics Aeronautical Systems, Inc (GA-ASI) to provide comprehensive Engineering Logistics Support (ELS) for the Marine Air-Ground Task Force (MAGTF) Unmanned Aircraft System (UAS) Expeditionary / Medium Altitude / Long Endurance (MUX/MALE) program, aiming to ensure the operational readiness, sustainment, and continuous improvement of USMC-unique payloads and systems. This critical support encompasses a broad range of activities including, but not limited to, program management, logistics, spares analysis, engineering services (e.g., troubleshooting, non-standard maintenance, configuration management, Engineering Change Proposals (ECPs), reach-back), lead systems integration (LSI), Field Maintenance Artisans (FMAs), Logistics Support Representatives (LSRs), Payload Operator Training, Diminishing Manufacturing Sources and Material Shortages (DMSMS) mitigation, airworthiness, cybersecurity, software sustainment, and technical data management. The proposed contract action is a follow-on effort for which the Government intends to solicit and negotiate with only one source under the authority of 10 U.S.C. 3204(a)(1) and FAR Overhaul 6.103-1, "Only One Responsible Source and No Other Type of Supplies or Services will Satisfy Agency Requirements." GA-ASI is the sole designer, developer, manufacturer, and integrator of the MQ-9, and therefore, is the only contractor with the requisite knowledge, experience, and technical data that can meet the Government's requirements on a timely basis and in a cost-effective manner. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. Interested parties, however, may identify their interest and capability by responding to the requirement. The Government will consider all information received prior to the closing date of this synopsis. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete the proposed contract action based upon responses to this notice is solely within the discretion of the Government. No phone inquiries will be entertained. Responses shall be made in writing by E-mail to the attention of Ms. Sarah Fyock or Ms. Sharina Miller using the contact information provided in this synopsis. Companies interested in subcontracting opportunities should contact GA-ASI directly at GA-ASISmall-Business@ga-asi.com. | - | Pre-Solicitation | 11/14/2026 |
The Naval Air Systems Command (NAVAIR), Aerial Targets Program Office (PMA-208), located at Patuxent River, MD, intends to negotiate and award a sole-source, Firm-Fixed-Price (FFP) contract to Northrop Grumman Systems Corporation (NGSC), San Diego, CA. The contemplated action is for the Full Rate Production (FRP) of the BQM-34S Subsonic Aerial Target (SSAT) system, encompassing a base period for FRP Lot 1 and options for FRP Lots 2, 3, and 4. The anticipated production quantity is twenty-five (25) BQM-34S targets per lot, representing a total potential quantity of up to one hundred (100) target systems across all lots. Award is projected for the third quarter (Q3) of Fiscal Year (FY) 2030, with contract deliveries spanning through FY 2036. The BQM-34S SSAT is a recoverable, subsonic aerial target system primarily utilized for naval weapon systems test and evaluation (T&E) and operational Fleet training exercises. This requirement will be procured under the statutory authority permitting other than full and open competition pursuant to 10 U.S.C. 3204(a)(1), as implemented by FAR 6.103-1, Only one responsible source and no other supplies or services will satisfy agency requirements. NGSC is the sole designer, developer and manufacturer of the BQM-34S SSAT. NGSC is the only known source possessing the requisite knowledge, maintenance and repair experience, and noncommercial technical data and software rights to meet the Government’s requirements for the BQM-34S SSAT System. IMPORTANT ADDITIONAL INFORMATION FOR INTERESTED PARTIES: This synopsis is published for informational purposes only. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. All responsible sources may submit a capability statement, which will be considered by the agency. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Companies interested in subcontracting opportunities should contact NGSC directly via ATTN: AISR&T/RQ-4 or Kelsey Silver at P.O. Box 509066, San Diego, CA 92150-9066. There are no commitments by the Government to issue any solicitations, make an award or awards, or to be responsible for any monies expended by any interested parties before award of a contract for the efforts mentioned above. Information provided herein is subject to change and in no way binds the Government to solicit for or award a contract. No telephone responses will be accepted. | - | Pre-Solicitation | 11/03/2026 |
The Naval Air Systems Command (NAVAIR), NAS Patuxent River, MD, intends to award Northrop Grumman Systems Corporation (NGSC), San Diego, CA, a sole source Indefinite Delivery Indefinite Quantity (IDIQ) contract in support of the MQ-4C program. The anticipated IDIQ is for the procurement of Engineering, Sustainment, and Logistical efforts in support of the MQ-4C Triton Unmanned Aircraft System for the United States Navy (USN) and Royal Australian Air Force (RAAF). Anticipated efforts include, but are not limited to: Non-Reccuring Engineering, Software and Cyber Sustainment activities, Integrated Logistic Support, Engineering Change Proposals, Technical Directive activities, Trade Studies, and Engineering Investigations. Contract award is anticipated for the third quarter of fiscal year 2027. The anticipated ordering period will be for approximately 48-months. This requirement will be procured in accordance with the statutory authority permitting other than full and open competition under Title 10 U.S.C 3204(a)(1), as implemented by FAR 6.103-1, “Only one responsible source and no other supplies or services will satisfy agency requirements.” As the sole designer, developer and manufacturer of the MQ-4C Triton UAS, NGAS is the only source with the requisite knowledge, experience, engineering expertise, and technical data required to meet the Government’s requirements within the program’s cost and schedule constraints. Note: THIS IS NOT A REQUEST FOR PROPOSAL. No contract will be awarded on the basis of offers received in response to this notice. All responsible sources may submit a capability statement that will be considered. There are no commitments by the Government to issue any solicitations, make an award, or to be responsible for any monies expended by any interested parties before award of a contract for the efforts mentioned above. A determination not to compete this requirement is within the discretion of the Government. Companies interested in subcontracting opportunities should contact Northrop Grumman Systems Corporation – Aerospace Systems attention: Vicky Harper-Hall, Socio-Economic Programs Sector Manager, email: vicky.harper-hall@ngc.com or phone (310) 331-3824. | - | Pre-Solicitation | 11/02/2026 |
The Naval Air Systems Command (NAVAIR), on behalf of the F/A-18E/F and EA-18G Program Office (PMA-265), is conducting market research to determine the industrial base’s existing capability and facility capacity to provide supplemental or secondary Service Life Modification (SLM) turnkey capacity for F/A-18E/F Super Hornet and EA-18G Growler aircraft starting in FY29. The Government seeks mature, currently operational—facilities, personnel, processes, tooling, and infrastructure capable of supporting SLM workload. The Government is not seeking conceptual or developmental solutions that would require significant new construction, extensive infrastructure development, or multi-year implementation before becoming operational. The Government currently executes these requirements through a hybrid framework utilizing the Original Equipment Manufacturer (OEM) (The Boeing Company) and a Naval Aviation Enterprise organic depot (Fleet Readiness Center Southwest) under a public private partnership with the OEM. To support long-term strike fighter inventory requirements, the Government is evaluating the availability of additional commercial or second-source depot modification repair overhaul (MRO) capacity. Information submitted in response to this notice will assist the Government in determining its long-term acquisition strategy through 2038, including whether to establish an additional qualified source to supplement the current capacity or maintain the current hybrid framework mentioned above under the authority of FAR 6.103-3(b)(1) (Defense Pricing, Contracting, and Acquisition Policy (DPCAP) Class Deviation (CD) 2026-O0017) / 10 U.S.C. 3204(a)(3)(A) (Industrial Mobilization). PMA-265 anticipates a maximum SLM induction profile of up to 47 aircraft per year across the industrial base. Actual aircraft allocation among available sources may vary based on Fleet requirements, aircraft availability, demonstrated performance, schedule, and available capacity. 1. Scope of Interest The Government is seeking information on industry capability to perform the SLM workload to supplement current capacity, including but not limited to: Aircraft induction, preservation, inspection, and documentation; F/A-18E/F and EA-18G SLM Specification Modification work; Installation of applicable Structural Technical Directives (TDs) and Advanced Capability Modifications such as Block III upgrade kits; Procurement and management of all required material, including long-lead material, using corporate approaches that support anticipated year-of-execution requirements and ensure material is available for installation when required; Inspection-based repairs and structural modifications; Manufacturing or sourcing of repair parts and materials, as required; Aircraft systems troubleshooting and functional verification; Aircraft records and database updates; and Support for Functional Check Flights and coordination with Government representatives. The Government recognizes that individual respondents may be capable of supporting only a subset of this work or a limited annual quantity. Responses identifying supplemental capability, secondary capability, or potential teaming arrangements are encouraged. 2. Information Requested Interested firms are requested to provide the following information: I. Company Information Company name, address, point of contact, telephone number, and email address. Business size and applicable socioeconomic status, if any. Relevant experience performing MRO / depot-level maintenance, advanced avionic systems modification, modernization, structural repair, or sustainment work on tactical aircraft. II. Facility Information Location(s) of existing facilities proposed for this effort. Number, type, and dimensions of available aircraft bays or work positions, including usable floor area, hangar-door dimensions, overhead clearance, and any facility limitations. For planning purposes, the aircraft footprint is 45 feet wide by 61 feet long Availability of a suitable runway and airfield support for F/A-18 and EA-18G series aircraft. Current facility utilization and the earliest date capacity could be made available. Access to required security, quality assurance, tooling, material handling, and aircraft-support infrastructure. Current, or ability to obtain, Defense Security Services (DSS) facility clearance of Secret. Consistent with Executive Order 14372, Prioritizing the Warfighter in Defense Contracting, and the USW(A&S) memorandum, Prioritizing the Warfighter and Negotiation of Contractor Facilitation Costs (dated 4 May 2026), respondents shall identify whether they anticipate using their own capital to fund stand-up costs necessary to perform the proposed work and describe any Government support, reimbursement, or other enablers required to establish the proposed capability. III. Capacity and Throughput Maximum number of F/A-18E/F and/or EA-18G aircraft the company could induct and complete annually. Expected induction ramp-up profile by year. Estimated average turnaround time from induction through return to the Fleet. Constraints that may limit throughput, including workforce, facilities, supply chain, engineering support, tooling, or Government-furnished material. Ability to adjust capacity in response to changing Fleet requirements or surge demand. Availability of funds to purchase all material to protect quantity throughput and maintain a stock of consumables to perform repair incidents throughout the modification (such as addressing corrosion), parts managements to include obsolescence and manufacturing parts capability. IV. Technical Capability Experience with F/A-18-series aircraft or comparable military tactical aircraft. Capability to perform structural inspections, repairs, modifications, TD incorporation, Non-destructive Inspections (NDI), wiring/electrical work, and systems troubleshooting. Capability to manufacture repair parts or develop repair procedures when required, using Government- or original equipment manufacturer-provided engineering direction. Ability to manage material procurement, kit installation, consumables, and repair-incident-to-modification requirements. Experience coordinating with the Defense Contract Management Agency (DCMA) or similar Government quality-assurance organizations. Ability to recruit, retain, and sustain sufficient qualified personnel to support anticipated SLM workload, including structural engineering personnel eligible for appointment as Naval Air Systems Command Designated Engineering Representatives (NAVDERs) to support the engineering analysis and disposition of aircraft-specific structural findings within the scope of authority delegated by NAVAIR. Respondents should describe their current and projected staffing capacity; recruitment, retention, and succession approaches; and ability to surge personnel as workload requires. V. Cybersecurity Ability to comply with applicable Department of the Navy, NAVAIR, and Department of War cybersecurity requirements for the protection, handling, storage, transmission, and access of Government information and data in performance of the proposed work. VI. Additional Information Identify any Government support, data, tooling, facilities, training, technical assistance, or other enablers that would be needed to establish or expand SLM capability. Provide any recommended acquisition, phasing, or transition approach that would help establish supplemental capacity while minimizing risk to Fleet readiness. 3. Response Instructions Responses should be limited to ten (10) pages and submitted electronically to jacob.r.heintze.civ@us.navy.mil no later than 3 December 2026. This RFI is issued for market research and planning purposes only. It is not a solicitation, request for proposal, or commitment by the Government to award a contract or reimburse any costs associated with responding. Information received may be used to assess available industry capability, capacity, potential small-business participation, and possible acquisition approaches to provide supplemental or secondary capacity for SLM work on F/A-18E/F Super Hornet and EA-18G Growler aircraft. | - | Market Research | 12/03/2026 |
***Start of Notice Description 20261109*** To ensure clarity for submission of questions related to the N0001927R1025 solicitation, the Government provides the following update to paragraph three (3) of the 27 October 2026 N0001927R1025 formal Request for Proposal (RFP) posting: Questions related to the solicitation are due not later than midnight (12:00am) 09 November 2026 and shall be submitted using the Excel file titled “Question and Answer Form_Final_RFP_Offeror Name” posted with the solicitation. Questions shall be submitted via email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil) on or before the 09 November 2026 submission date. While submission of questions will be accepted up to midnight (12:00am) 09 November 2026, interested parties are encouraged to submit as early as possible to facilitate timely review and response by the Government. ***End of Notice Description 20261109*** ***Start of Notice Description 20261027*** The Naval Air Systems Command (NAVAIR), on behalf of PMA-271 (Airborne Strategic Command, Control and Communications Program Office), posts formal Request for Proposal (RFP) N0001927R1025 for the E-6B Mercury Depot Maintenance, Repair and Overhaul (MRO) effort. This notice is a follow-on to the E-6B MRO DRAFT Request for Proposal Notice N00019-25-RFPREQ-APM271-0012. NAVAIR intends to award a single source Indefinite Delivery Indefinite Quantity (IDIQ) contract for MRO services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. This IDIQ is anticipated to include one (1) five-year base ordering period with the option for one (1) additional five-year ordering period from Fiscal Years (FYs) 2027 through 2036. Planned award is during fourth quarter of Government FY 2027. Questions related to the solicitation are due not later than 09 November 2026 and shall be submitted using the Excel file titled “Question and Answer Form_Final_RFP_Offeror Name” posted with the solicitation. Questions shall be submitted via email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil) on or before the 09 November 2026 submission date. Proposals are due not later than the date and time as specified in Block 9 of the SF 33. However, potential Offerors are encouraged to submit portions of their proposal associated with past performance 14 calendar days prior to that submission date. See Section L paragraph 3.1 of the solicitation document for details. Access to Final RFP: The solicitation, including all attachments, is posted in the Solicitation Module of the U.S. Government PIEE website with restricted access and will only be made available to companies incorporated in the United States as verified via SAM.gov. The final RFP and associated attachments may contain Controlled Unclassified Information (CUI) and may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Request Access Procedures: Accordingly, all requests for access to the final RFP and associated attachments must be in writing and shall include a statement that the company intends to submit as a prime contractor, as well as a certified copy of a DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service at (800) 352-3572 or https://www.dla.mil/Logistics-Operations/Services/JCP/#jointcertification-program-jcp-office; company name, address, and CAGE code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module). After obtaining a certified DD Form 2345, each potential Offeror shall transmit via email its written request for access to the final RFP and associated attachments, with the certified DD Form 2345 attached to the email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil). Prior to granting access to the final RFP and associated attachments, the Government will verify that the company requesting the data is incorporated within the United States based on CAGE code listing in SAM.gov. Upon review of the potential Offeror’s written request and verification of potential Offeror’s status in SAM.gov, the Government will provide the potential Offeror access to the final RFP and associated attachments in the Solicitation Module of the U.S. Government PIEE website. Companies that had previously requested and been granted access to the DRAFT Request for Proposal under Notice N00019-25-RFPREQ-APM271-0012, have already been provided access in PIEE to the formal RFP under Notice N0001927R1025. The Government may also provide separately, via the dissemination method described below, technical documents to assist potential Offerors with developing their proposals. Access to Other Technical Documents: (Potential Prime Contractor Requests Only) Technical documents have been made available to assist with developing proposals. Some of the technical documents may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Accordingly, all requests for access to technical documents must follow the “Request Access Procedures” described above. Upon review of the potential Offeror’s written request and approved DD Form 2345, the Government will provide the potential Offeror access to the technical documents via the DoD SAFE website (previously AMRDEC) - https://safe.apps.mil/. The data custodian listed in Block 3 of DD Form 2345 will receive a link, via e-mail, to the package download page as well as a password. The password is unique for each recipient and will be disabled once SAFE detects that the user successfully downloaded each file within the package. CUI Disclaimer: Distribution of CUI by a potential Offeror to that potential Offerors team members, partners, subcontractors, suppliers and/or vendors shall be the responsibility of the potential Offeror and shall be limited to a need-to-know basis. All guidance contained herein with regard to handling, distribution and destruction of CUI data shall be flowed down to all subcontractors and team members. Those who access or take receipt of any technical data shall comply with all laws, export controls and distribution statements associated with the document. ***End of Notice Description 20261027*** | - | Solicitation | 12/11/2026 |
Additional Details
Solicitation Number
N00019-26-RFPREQ-WPM262-0263
Archive Date
Oct 14, 2026
Office Address
PATUXENT RIVER, MD, 20670-5000