GovChime
Notice ID: 3e831b984e3c4ba697567c4546117860PresolicitationArchived

15--Freefly Unmanned Aircraft Systems (UAS)

Archived on February 26, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM EST
Posted
January 27, 2026
Notice type
Presolicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
336411: Aircraft Manufacturing
Agency
Department of the InteriorDEPARTMENTAL OFFICES

Notice details

Office
IBC ACQ SVCS DIRECTORATE (00004)
Last updated
Nov 3, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
140D0426Q0044
Notice ID
3e831b984e3c4ba697567c4546117860

Description

The Department of Interior (DOI), Interior Business Center, Acquisition Services Directorate intends to negotiate a sole source blanket purchase agreement with Freefly Systems Inc. for the Freefly Alta X, Astro Max UAS, any future Freefly UAS and prototypes, as well as other payloads and other accessories (payloads, batteries, chargers, future Ground Control Stations, tablets, etc.) needed for Department of Interior (DOI) operations. The Freefly Alta X and Astro Max UAS meets and/or exceeds the Office of Aviation (OAS) standards and requirements for a UAS under 55lbs max takeoff weight and payload capacity that exceeds necessary requirements for multiple payloads, including the IGNIS. This UAS complies with Federal Acquisition Regulation (FAR) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Drone Security Drone Act - Cover Foreign Entities.

This pre-solicitation notice is not a request for competitive quotes. No solicitation documents are available and telephone requests will not be honored. However, if a firm believes it can meet the requirements it must furnish information about its products and services to the Contracting Officer by the response date of this notice. Information must be sent to the Contracting Officer, Stephanie Boles at stephanie_boles@ibc.doi.gov. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion of the Government. If no responses are received, the Government will proceed with the sole source negotiation and award with Freefly Systems Inc.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

  1. 4
    Version 4Special NoticeArchived

    15--Freefly Unmanned Aircraft Systems (UAS)

    Notice c3e8d934e1924eb6a94c08be796083d4 on SAM.gov

  2. 6
    Version 6PresolicitationArchivedCurrent

    Type changed from Special Notice to Presolicitation

    15--Freefly Unmanned Aircraft Systems (UAS)

    Notice 3e831b984e3c4ba697567c4546117860 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Unmanned Aerial System (UAS) with Aerial IgnitionCapabilities1. Scope and Objective The purpose of this solicitation is to procure a commercial-off-the-shelf (COTS) Unmanned Aerial System (UAS) equipped with an aerial ignition payload system, thermal and optical sensors, and required support equipment. The system will primarily be used for forestry, land management, and controlled burn operations. 2.Regulatory and Compliance Requirements To be considered for award, the proposed system MUST meet the following compliance standards: NDAA / Buy American Compliance: The UAS and all associated components (including sensors and payloads)must be fully compliant with Section 848 of the National Defense Authorization Act(NDAA) and the Buy American Act. DIU Blue UAS Cleared List Status: The bidder MUST explicitly state in their proposal/quote whether the proposed UAS platform is currently listed on the Defense Innovation Unit (DIU) Blue UAS Cleared List. This status is a critical factor for agency procurement routing and must be verified by the vendor. FAA Regulations: The system must comply with current Federal Aviation Administration(FAA)regulations for public or civil aircraft operations. 3. Minimum Technical Specifications 3.1.Flight Performance and Payload Flight Time: The UAS must be capable of a minimum 55-minute flight time without a payload. When carrying a heavy payload (up to 35 lbs.), it must maintain a flight time of at least 10 minutes. While operating the aerial ignition payload, flight time must be at least 22 to 30 minutes. Payload Capacity: Must each have a minimum payload capacity of 35 lbs. Range: Must support a communication range of up to 5kilometers with a clear line of sight from the controller to the aircraft. Deployment: The system must be capable of being assembled and ready for flight within 5minutes. 3.2.Environmental and Durability Temperature Range: Must be fully operable in temperatures ranging from 40 degrees Fahrenheit to 105 degrees Fahrenheit. Wind Resistance: Must be 1 each capable of stable flight in winds up to 15 meters per second. Humidity: Must be capable of operating in up to 90 percent non-condensing humidity. 3.3.Aerial Ignition System Payload Functionality: Must feature a payload capable of carrying, accurately delivering ,and dropping ignition spheres. Safety Features: Must include are mote emergency release system to physically drop or jettison the ignition payload in the event of a hung sphere to prevent damage or fire to the UAS. Must feature geo-fencing capabilities to prevent ignition spheres from being dropped outside of designated burn areas. Must include onboard sensors to detect obstructions, internal resistance, and temperature anomalies within the payload. 3.4. Sensors and Imaging Thermal Imaging: Must include a radio metric thermal camera with a minimum resolution of 640 x 512 pixel sat 30Hz. Optical Camera: Must include a Full HD visual camera with at least a 10x optical zoom capability. Multispectral Capabilities (Optional or Priced Separately): Ability to integrate multi spectral sensors (such as high-resolution panchromatic sensor, integrated thermal imager, and multiple spectral bands). 3.5. Navigation, Data, and Control Navigation: Must utilize high-precision GPS (centimeter-level accuracy, such as F9P or equivalent). Autonomy: Must support both manual flight via controller and autonomous flight missions using pre-programmed waypoints. Data Transmission: All real-time data transmission must been crypted over a 2.4Ghz frequency. Software Integration: Mission planning software must allow the importation of burn plans and maps in standard geo-referenced formats (such as PDFs, KMZs). 4. Required Equipment and Deliverables The vendor shall provide a complete, ready-to-fly package that includes, at a minimum: 1xNDAA-Compliant, DIU Blue UAS Cleared (or verified equivalent) UAS Platform 1xAerial Ignition Payload System 1x Ground Control Station (GCS) / Controller 1x Therma land Optical Camera Package 4x Sets of Flight Batteries 2x Battery Chargers (Double charger kit preferred) 2xBattery Transport Cases Spare parts kit (including spare CW and CCW propellers) 5.Training, Maintenance, and Support Training: The vendor must provide a comprehensive training seminar (minimum 3 days) for up to five (5) personnel. Maintenance Documentation: Must include comprehensive maintenance and repair instructions. Extended Care / Support Plan: The vendor will provide an annual maintenance subscription or care plan that includes: Annual inspection and calibration (Clean and Check). Software updates. Discounts on expedited labor, parts, and repair shipping. Access to dedicated technical support.
87%
Combined Synopsis08/27/2026
Item:Unmanned Aerial System (UAS) withAerial Ignition Capabilities UASBrand Name:Alta X+ IGNISPart Number:Salient Characteristics:Unmanned Aerial System (UAS) with Aerial Ignition Capabilities1. Scope and Objective The purpose of this solicitation is to procure a commercial-off-the-shelf (COTS) Unmanned Aerial System (UAS) equipped with an aerial ignition payload system, thermal and optical sensors, and required support equipment. The system will primarily be used for forestry, land management, and controlled burn operations. 2.Regulatory and Compliance Requirements To be considered for award, the proposed system MUST meet the following compliance standards: NDAA / TAA Compliance: The UAS and all associated components (including sensors and payloads) must be fully compliant with Section 848 of the National Defense Authorization Act (NDAA) and the Trade Agreements Act (TAA). DIU Blue UAS Cleared List Status: The bidder MUST explicitly state in their proposal/quote whether the proposed UAS platform is currently listed on the Defense Innovation Unit (DIU) Blue UAS Cleared List. This status is a critical factor for agency procurement routing and must be verified by the vendor. FAA Regulations: The system must comply with current Federal Aviation Administration (FAA)regulations for public or civil aircraft operations. 3. Minimum Technical Specifications 3.1.Flight Performance and Payload Flight Time: The UAS must be capable of a minimum 55-minute flight time without a payload. When carrying a heavy payload (up to 35 lbs.), it must maintain a flight time of at least 10 minutes. While operating the aerial ignition payload, flight time must be at least 22 to 30 minutes. Payload Capacity: Must have a minimum payload capacity of 35 lbs. Range: Must support a communication range of up to 5kilometers with a clear line of sight from the controller to the aircraft. Deployment: The system must be capable of being assembled and ready for flight within 5 minutes. 3.2.Environmental and Durability Temperature Range: Must be fully operable in temperatures ranging from 40 degrees Fahrenheit to 105 degrees Fahrenheit. Wind Resistance: Must be 1 each capable of stable flight in winds up to 15 meters per second. Humidity: Must be capable of operating in up to 90 percent non-condensing humidity. 3.3. Aerial Ignition System Payload Functionality: Must feature a payload capable of carrying, accurately delivering, and dropping ignition spheres. Safety Features: Must include a remote emergency release system to physically drop or jettison the ignition payload in the event of a hung sphere to prevent damage or fire to the UAS. Must feature geo-fencing capabilities to prevent ignition spheres from being dropped outside of designated burn areas. Must include onboard sensors to detect obstructions, internal resistance, and temperature anomalies within the payload. 3.4. Sensors and Imaging Thermal Imaging: Must include a radiometric thermal camera with a minimum resolution of 640 x 512 pixels at 30Hz. Optical Camera: Must include a Full HD visual camera with at least a 10x optical zoom capability. Multispectral Capabilities (Optional or Priced Separately): Ability to integrate multispectral sensors (such as high-resolution panchromatic sensor, integrated thermal imager, and multiple spectral bands). 3.5. Navigation, Data, and Control Navigation: Must utilize high-precision GPS (centimeter-level accuracy, such as F9P or equivalent). Autonomy: Must support both manual flight via controller and autonomous flight missions using pre-programmed waypoints. Data Transmission: All real-time data transmission must been crypted over a 2.4Ghz frequency. Software Integration: Mission planning software must allow the importation of burn plans and maps in standard geo-referenced formats (such as PDFs, KMZs). 4. Required Equipment and Deliverables The vendor shall provide a complete, ready-to-fly package that includes, at a minimum: 1x NDAA-Compliant, DIU Blue UAS Cleared (or verified equivalent) UAS Platform 1x Aerial Ignition Payload System 1x Ground Control Station (GCS) / Controller 1x Thermal and Optical Camera Package 4x Sets of Flight Batteries 2x Battery Chargers (Double charger kit preferred) 2xBattery Transport Cases Spare parts kit (including spare CW and CCW propellers) 5.Training, Maintenance, and Support Training: The vendor must provide a comprehensive training seminar (minimum 3 days) for up to five (5) personnel. Maintenance Documentation: Must include comprehensive maintenance and repair instructions. Extended Care / Support Plan: The vendor should offer an annual maintenance subscription or care plan that includes: Annual inspection and calibration (Clean and Check). Software updates. Discounts on expedited labor, parts, and repair shipping. Access to dedicated technical support.
87%
Combined Synopsis08/13/2026
Unmanned Aircraft System Kinetic Strike Payload
87%
Combined Synopsis03/16/2026
small unmanned aircraft systems (sUAS). See attached SSN for more Information.
87%
Market Research02/11/2026
RFI questions and answers posted on December 5, 2025. RFI questions are due by November 21, 2025. RFI responses are due by December 12, 2025. SMALL UNMANNED AIRCRAFT SYSTEMS (sUAS) LEVEL III sUAS REQUEST FOR INFORMATON DESCRIPTION: U.S. Customs and Border Protection (CBP) is conducting market research through a Request for Information (RFI) on the current availability and technological capabilities of vendors to provide Level III Small Unmanned Aircraft Systems (SUAS) to enhance USBP’s SUAS Program. THE GOVERNMENT DOES NOT INTEND TO AWARD A CONTRACT ON THE BASIS OF THIS RFI OR TO OTHERWISE PAY FOR INFORMATION RECEIVED. This RFI is issued solely for information, planning purposes, and market research only; it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP. This research does not commit the Government to contract for any supply or service. CBP will not pay for any costs associated with responding to this research. Not responding to this RFI does not preclude participation in any full future full and open competition RFP. If a solicitation is released, it will be posted to the SAM.gov (https://sam.gov) website. All submissions become the property of the Government and will not be returned. The information obtained from industries responses to this RFI may be used in the development of an acquisition strategy and future RFP.
82%
Market Research12/12/2026

Additional Details

Solicitation Number

140D0426Q0044

Archive Date

Feb 26, 2026

Office Address

HERNDON, VA, 20170