Mats and Wall Pads for the TSA Training Center at ACY
Archived on October 8, 2025. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM EDT
- Posted
- September 22, 2025
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 339920: Sporting and Athletic Goods Manufacturing
- Agency
- Department of Homeland SecurityTRANSPORTATION SECURITY ADMINISTRATION
Notice details
- Office
- MISSION ESSENTIALS
- Last updated
- Nov 7, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 70T05025Q7670N007
- Notice ID
- 25f3a531fbf84514ac450576a6212435
Description
9/22/25 Update: The solicitation is amended to extend the Quote due date to 23 September 2025 at 12PM Eastern.
9/18/25 Update: Amended the solicitation document to remove the Required Site Visit section from the Statement of Work. Clarified below in bold under (xv) that Quotes are to be emailed to kurt.allen@tsa.dhs.gov.
9/10/22 Update: Attached the Question and Answer Tracker.
This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.
(ii)The solicitation number is 70T05025Q7670N007 and is issued as an request for quotation (RFQ). The solicitation and its attachments are attached. Please read everything carefully.
(iii)A statement that the solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-05.
(iv)NAICS code is 339920 and small business size standard is 750 employees.
(v)A list of line item number(s) and items, quantities, and units of measure - See attached solicitation documents.
(vi)Description of requirements for the items to be acquired - See attached solicitation documents.
(vii)Date(s) and place(s) of delivery and acceptance and FOB point - See attached solicitation documents.
(viii)The provision at 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services does apply.
(ix)The provision at 52.212-2, Evaluation-Commercial Products and Commercial Services does not apply.
(x)A completed copy of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services is required - Attached.
(xi)The clause at 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services, applies to this acquisition.
(xii)The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services, applies to this acquisition - See attached solicitation documents.
(xiii)A statement regarding any additional contract requirement(s) or terms and conditions (such as contract financing arrangements or warranty requirements) determined by the contracting officer to be necessary for this acquisition and consistent with customary commercial practices - See attached solicitation documents.
(xiv)A statement regarding the Defense Priorities and Allocations System (DPAS) and assigned rating, if applicable - NA.
(xv)The date, time and place quotes are due - 23 September 2025 at 12pm Eastern. Quotes are to be emailed to kurt.allen@tsa.dhs.gov. Quotes that are not in compliance with the INSTRUCTIONS contained in Section 5 of the attached solicitation will be removed from award consideration.
(xvi)The name and telephone number of the individual to contact for information regarding the solicitation - Kurt Allen, 571-459-3858, kurt.allen@tsa.dhs.gov.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (5)
- Download
70T05025Q7670N007 A1 - Mats and Wall Pads for the TSA Training Center at ACY.pdf
595 KBAdded in Combined Synopsis/Solicitation version 3Posted - Download
70T05025Q7670N007 - Mats and Wall Pads for the TSA Training Center at ACY.pdf
652 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Question and Answer Tracker - 70T05025Q7670N007.xlsx
11 KBAdded in Combined Synopsis/Solicitation version 2Posted - Download
Attachment 1 - Reps and Certs and Pricing Table.xlsx
11 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Attachment 2 - 52.212-3 Offeror Reps and Certs.docx
42 KBAdded in Combined Synopsis/Solicitation version 1Posted
Lifecycle
- 1Version 1Combined Synopsis/SolicitationArchived
Mats and Wall Pads for the TSA Training Center at ACY
- 2Version 2Combined Synopsis/SolicitationArchived
Mats and Wall Pads for the TSA Training Center at ACY
- 3Version 3Combined Synopsis/SolicitationArchived
Mats and Wall Pads for the TSA Training Center at ACY
- 5Version 5Combined Synopsis/SolicitationArchivedCurrent
Mats and Wall Pads for the TSA Training Center at ACY
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
5 FOOT BEAVER FIT PERFORMANCE LOCKER | - | Combined Synopsis | 11/18/2026 |
This is a combined synopsis/solicitation for commercial items prepared in accordance with the FAR Overhaul Part 12 and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Offers are being requested, and a separate written solicitation will not be issued. Solicitation 70ZU0127P21008B00 is issued as a Request for Quotation (RFQ) This solicitation incorporates provisions and clauses by reference. Full text of provisions and clauses may be accessed electronically at www.acquisition.gov. This acquisition is Brand Name Mandatory. Brand name part is mandatory to be considered for award. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order. No down payments or advanced payments will be made to the awarded vendor. Award will be made on a Best Value Basis as result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency. Best Value will be evaluated by who meets all technical requirements, who meets our required time frame and by price. All quotes shall be emailed to Courtney Gustin via Courtney.C.Gustin@uscg.mil and shall be received no later than 13 NOV 26 at 10:00 am (eastern). All emails quotes shall have 70ZU0127P21008B00 in subject of email. Item 1) NSN: 5330-12-348-0104 GASKET UPPER FLANGE GASKET ON THE INTERCOOLER USED ON THE MTU 8V396 EACH GASKET MUST BE INDIVIDUALLY PACKAGED AND MARKED MFG: ROLLS-ROYCE SOLUTIONS GMBH PN: 55811100014 QTY: 15 EA Item 2) NSN: 5330-12-348-0103 GASKET GASKET USED AS PART OF THE INTERCOOLER ASSEMBLY ON THE MTU 8V396 TE94 DIESEL ENGINES EACH GASKET MUST BE INDIVIDUALLY PACKAGED AND MARKED MFG: ROLLS-ROYCE SOLUTIONS GMBH PN: 55811100013 QTY: 15 KT *** WE HAVE A HISTORY OF THESE GASKETS BEING DAMAGED FROM SHIPPING AND HANDLING. PP&M REQUIREMENTS MUST BE FOLLOWED FOR THIS MATERIAL. *** INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MILSTD-2073-1E METHOD 42. PLACE BETWEEN SHEET OF, OR IN FOLD OF, CORRUGATED FIBERBOARD OF SUFFICIENT STIFFNESS TO RESIST BENDING, OVERWRAP WITH WATERPROOF WRAPPING PAPER CONFORMING TO PPPB-1055 AND SEAL WITH PRESSURE SENSITIVE TAPE CONFORMING TO ASTM-D5486 OR ADHESIVE CONFORMING TO MMMA-260. SEAL IN BAGS CONFORMING TO CLASS B, C OR E OF MIL-DTL-117, USING STIFFENING MATERIAL INTERNALLY IF NEEDED TO MAINTAIN RIGIDITY. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY. ALL MARKINGS SHALL BE PLACED SO VISIBLE BY FORKLIFT OPERATOR, IF APPLICABLE. ALL ITEMS ARE INSPECTED WHEN DELIVERED TO THE COAST GUARD WAREHOUSE. FAILURE TO MEET THE REQUIREMENTS FOR PACKAGING, PACKING, MARKING (PP&M) AND BAR-CODING WILL RESULT IN THE ITEM(S) BEING REJECTED AND POSSIBLY RETURNED TO THE VENDOR. THIS WILL DELAY PAYMENT. ANY QUESTIONS CONCERNING THE PP&M REQUIREMENTS OR BAR-CODING SHOULD BE ADDRESSED WITH THE CONTRACTING OFFICER PRIOR TO CONTRACT AWARD. REQUIRED DELIVERY DATE: 07 DECEMBER 2027 SHIP-FOB DESTINATION TO: USCG SFLC RECEIVING ROOM – BLDG. 88 2401 HAWKINS POINT ROAD BALTIMORE, MD 21226 FAR CLAUSES: This order is subject to but not limited to the following Federal Acquisition Regulations: 52.204-19 Incorporation by Reference of Representations and Certifications. 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services. 52.212-2 Evaluation-Commercial Products and Commercial Services. 52.212-4 Contracts Terms and Conditions. 52.219-6 Notice of Total Small Business Set-Aside. 52.222-50 Combat Trafficking in Persons 52.222-90 Addressing DEI Discrimination by Federal Contractors. 52-225-1 Buy American-Supplies 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving 52.247-34 F.O.B. Destination | - | Combined Synopsis | 11/13/2026 |
This is a combined synopsis/solicitation for commercial items prepared in accordance with the FAR Overhaul Part 12 and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Offers are being requested, and a separate written solicitation will not be issued. Solicitation 70ZU0127P21001B00 is issued as a Request for Quotation (RFQ) This solicitation incorporates provisions and clauses by reference. Full text of provisions and clauses may be accessed electronically at www.acquisition.gov. This acquisition is unrestricted. It is anticipated that a non-competitive sole source purchase order shall be awarded as a result of this synopsis/solicitation. Concerns having the expertise and required capabilities to provide this item are invited to submit complete information discussing the same within two (2) calendar days from the day this notice posted. The data must include sufficient details to allow the Coast Guard to evaluate the proposal relative to the requirements. The information submitted must include a letter from the OEM verifying the offeror is an authorized distributor verifying the OEM will supply genuine OEM parts. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order. No down payments or advanced payments will be made to the awarded vendor. Award will be made on a Best Value Basis as result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency. Best Value will be evaluated by who meets all technical requirements, who meets our required time frame and by price. All quotes shall be emailed to Courtney Gustin via Courtney.C.Gustin@uscg.mil and shall be received no later than 05 NOV 26 at 10:00 am (eastern). All emails quotes shall have 70ZU0127P21001B00 in subject of email. Item 1) NSN: 5330-12-338-7330 ODMS GASKET GASKET FOR CRANKCASE BREATHER ON THE MTU 8V-396-TE94. MFG: ROLLS-ROYCE SOLUTIONS GMBH PN: 5500180280 QTY: 190 EA Item 2) NSN: 5330-01-018-7159 ODMS GASKET OIL FILTER GASKET FOR THE ZF2500 REDUCTION GEAR ON THE 87 WPB VESSELS. MFG: ZAHNRADFABRIK FRIEDRICHSHAFEN AG PN: 0501303905 QTY: 104 EA Item 3) NSN: 5330-01-018-7079 ODMS RING, SEALING RING SEALING, GASKET USED AS PART OF THE ZF REDUCTION GEAR ON THE 87 WPB VESSELS. MFG: DIN DEUTSCHES INSTITUT PN: 0634 801 098 QTY: 120 EA Item 4) NSN: 5331-01-018-8007 ODMS PACKING, PREFORMED THIS ITEM IS THE PREFORMED PACKING PART OF THE DUPLEX FUEL FILTER. MFG: ROLLS-ROYCE SOLUTIONS GMBH PN: 700294125000 QTY: 400 EA Item 5) NSN: 5330-12-156-4539 ODMS GASKET MTU SEALING RING USED AS PART OF THE MTU 8V396 DIESEL ENGINES. MFG: ROLLS-ROYCE SOLUTIONS GMBH PN: 07603.047.97 QTY: 240 EA Item 5) NSN: 5330-12-156-4539 ODMS GASKET MTU SEALING RING USED AS PART OF THE MTU 8V396 DIESEL ENGINES. MFG: ROLLS-ROYCE SOLUTIONS GMBH PN: 07603.047.97 QTY: 240 EA Item 6) NSN: 4610-01-396-1460 ODMS FILTER ,REVERSE OSMOSIS MFG: MEISSNER FILTRATION PRODUCTS INC DI PN: 33-0005 QTY: 70 EA ***EACH ITEM LISTED SHALL BE INDIVIDUALLY PRESERVED AND PACKAGED AS APPROPRIATE IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY. ALL MARKINGS SHALL BE PLACED SO VISIBLE BY FORKLIFT OPERATOR, IF APPLICABLE. ALL ITEMS ARE INSPECTED WHEN DELIVERED TO THE COAST GUARD WAREHOUSE. FAILURE TO MEET THE REQUIREMENTS FOR PACKAGING, PACKING, MARKING (PP&M) AND BAR-CODING WILL RESULT IN THE ITEM(S) BEING REJECTED AND POSSIBLY RETURNED TO THE VENDOR. THIS WILL DELAY PAYMENT. ANY QUESTIONS CONCERNING THE PP&M REQUIREMENTS OR BAR-CODING SHOULD BE ADDRESSED WITH THE CONTRACTING OFFICER PRIOR TO CONTRACTAWARD. REQUIRED DELIVERY DATE: 12 DECEMBER 2026 SHIP-FOB DESTINATION TO: USCG SFLC RECEIVING ROOM – BLDG. 88 2401 HAWKINS POINT ROAD BALTIMORE, MD 21226 All invoicing for Purchase Order will now be entered and processed through www.ipp.gov. FAR CLAUSES: This order is subject to but not limited to the following Federal Acquisition Regulations: 52.204-19 Incorporation by Reference of Representations and Certifications. 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services. 52.212-2 Evaluation-Commercial Products and Commercial Services. 52.212-4 Contracts Terms and Conditions. 52.222-50 Combat Trafficking in Persons. 52.222-90 Addressing DEI Discrimination by Federal Contractors. 52-225-1 Buy American-Supplies. 52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act. 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. 52.247-34 F.O.B. Destination. | - | Combined Synopsis | 11/05/2026 |
SPORTS EQUIPMENT & APPAREL | - | Combined Synopsis | 10/28/2026 |
5FT BEAVER FIT HEAVY PERFORMANCE LOCKER | - | Combined Synopsis | 09/30/2026 |
Additional Details
Solicitation Number
70T05025Q7670N007
Archive Date
Oct 8, 2025
Office Address
Springfield, VA, 20598