GovChime
Notice ID: cdba0c8d77e04f638a1b98ded71f89c4Award NoticeAwardedArchived

Installation of Instron Machine

Awarded on September 1, 2026. Full description on SAM.gov.

Awarded tounder W911QY26CA056 (source: SAM.gov award notice)• $27.5K

Overview

Posted
September 10, 2026
Notice type
Award Notice
Set-aside
Small Business Set Aside - Total
NAICS
236220: Commercial and Institutional Building Construction
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-APG NATICK
Place of performance
Natick, Massachusetts, 01760
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov
Award date
Sep 1, 2026
Award amount (SAM.gov award notice)
$27.5K

Identifiers

Solicitation number
W911QY-26-R-INST
Notice ID
cdba0c8d77e04f638a1b98ded71f89c4
Award number (PIID)
W911QY26CA056

Description

Amendment 2 08/18/2026: The purpose of this amendment is to attach an updated Q&A sheet. This file is labelled as "QA Instron Update 2". Also, the due date for offerors is being extended to 08/20/2026 @1600. Amendment 1: The purpose of this amendment is to post a Q&A sheet stemming from questions asked at the site visit. This Q&A is being attached as file "QA Instron Update 1". This is a combined synopsis/solicitation for commercial services prepared in accordance with RFO FAR part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation number W911QY-26-R-INST is issued as a Request for Proposals (RFP) for the installation of an Instron Machine at Natick Soldiers Systems Center. This acquisition is 100% set aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. The applicable NAICs and PSC codes are 236220 and Z2DB respectively. The size standard for NAICs code 238190 is $45 million. Line Items, Quantities, and Units of Measure: Line Item 0001: The contractor shall remove existing Instron Machine from room S126 and move to the warehouse, install new Instron machine, raise existing walls and ceiling to accommodate new Instron machine, furnish and install power to new Instron, and furnish and install air to the new Instron. Description of Requirement: The Contractor shall provide all labor, materials, and equipment necessary to perform all work, purchase, and installation of this new Instron Machine. The contractor shall remove existing Instron Machine from room S126 and move to the warehouse, install new Instron machine, raise existing walls and ceiling to accommodate new Instron machine, furnish/install power to new Instron, and furnish/install air to the new Instron. Dates and Deliveries: F.O.B Point is destination, any deliveries are to be made at 15 General Green Ave, Natick, MA 01760. ATTN: Joshua Bulotsky. Inspection and Acceptance to be conducted via the United States Army Combat Capabilities Developmental Command – Soldier Center (CCDC-SC). The period of performance for this acquisition will be 60 working days from the date of award. Solicitation Provisions/Contract Clauses incorporated by Reference: 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements Representation. 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. 52.204-7 System for Award Management-Registration. (Deviation 2026 O0038) 52.204-9 Personal Identity Verification of Contractor Personnel. 52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) 52.204-21 Basic Safeguarding of Covered Contractor Information Systems 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment 52.204-25 Prohibition of Contracting for Certain Telecomunications and Video Surveillance Services or Equipment 52.204-26 Covered Telecommunications Equipment or Services—Representation 52.204-27 Prohibition on a ByteDance Covered Application 52.204-29 Federal Acquisition Supply Chain Security Act Orders—Representation and Disclosures. 52.204-30 Federal Acquisition Supply Chain Security Act Orders—Prohibition 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. (Deviation 2026-O0038) 52.212-1 Instructions to Offerors-Commercial Products and Commercial Services 52.212-2 Evaluation-Commercial Products and Commercial Services 52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026 O0038) 52.219-28 Post-Award Small Business Program Representation 52.222-3 Convict Labor 52.222-36 Equal Opportunity for Workers with Disabilities 52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) 52.222-90 Addressing DEI Discrimination by Federal Contractors 52.223-23 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals—Representation 52.223-23 Sustainable Products. (Deviation 2026-O0038) 52.224-3 Privacy Training 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. 52.233-3 Protest after Award. (Deviation 2026-O0038) 2026-02 SEC I 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) 52.236-2 Differing Site Conditions 52.236-3 Site Investigation and Conditions Affecting the Work 52.236-5 Material and Workmanship 52.236-6 Superintendence by the Contractor 52.236-7 Permits and Responsibilities 52.236-8 Other Contracts 52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements 52.236-10 Operations and Storage Areas 52.236-12 Cleaning Up 52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026-O0038) 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) 52.240-93 Basic Safeguarding of Covered Contractor Information Systems 52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-O0038) 52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026-O0040, Revision 1) 252.201-7000 Contracting Officer's Representative. 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 252.203-7005 Representation Relating to Compensation of Former DoD Officials. 252.204-7004 Antiterrorism Awareness Training for Contractors. 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. 252.204-7021 Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirement 252.204-7024 Notice on the Use of the Supplier Performance Risk System. 252.204-7025 Notice of Cybersecurity Maturity Model Certification Level Requirements 252.223-7008 Prohibition of Hexavalent Chromium. 252.225-7055 Representation Regarding Business Operations with the Maduro Regime. 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 252.232-7010 Levies on Contract Payments. 252.236-7000 Modification Proposals-Price Breakdown. 252.247-7023 Transportation of Supplies by Sea. Solicitation Provisions/Contract Clauses Included by Full Text: 52.211-11 Liquidated Damages-Supplies, Services, or Research and Development (Sept 2000) (a) If the Contractor fails to deliver the supplies or perform the services within the time specified in this contract, the Contractor shall, in place of actual damages, pay to the Government liquidated damages of $100 per calendar day of delay. (b) If the Government terminates this contract in whole or in part under the Default-Fixed-Price Supply and Service clause, the Contractor is liable for liquidated damages accruing until the Government reasonably obtains delivery or performance of similar supplies or services. These liquidated damages are in addition to excess costs of repurchase under the Termination clause. (c) The Contractor will not be charged with liquidated damages when the delay in delivery or performance is beyond the control and without the fault or negligence of the Contractor as defined in the Default-Fixed-Price Supply and Service clause in this contract. (End of clause) 52.212-1 Instructions to Offerors-Commercial Products and Commercial Services (Deviation 2026-O0038) (a) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. As a minimum, offers shall include- (1) The solicitation number; (2) The name, address, telephone number of the Offeror; (3) The Offeror's Unique Entity Identifier (UEI) and, if applicable, Electronic Funds Transfer (EFT) indicator; (4) Information necessary to evaluate the factors contained in the provision at 52.212-2 or as described in the solicitation; (5) Responses to provisions that require Offeror completion of information, representations, and certifications (other than those collected via the System for Award Management (SAM)); and (6) A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and any solicitation amendments. (b) Period for acceptance of offers. The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. (c) Late submissions, modifications, revisions, and withdrawals of offers. (1) Offerors are responsible for submitting offers and any modifications or revisions to the Government office designated in the solicitation by the time specified in the solicitation. (2) Any offer, modification, or revision received after the time specified for receipt of offers is "late" and will not be considered unless it is received before award is made and the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition. However, a late modification of an otherwise successful offer that makes its terms more favorable to the Government will be considered at any time it is received and may be accepted. (3) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (4) Offerors may withdraw their offers by written notice to the Government received at any time before award. (d) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with Offerors. Therefore, the Offeror's initial offer should contain the Offeror's best terms. However, the Government reserves the right to conduct discussions, if necessary. The Government may reject any or all offers if such action is in the public interest, accept other than the lowest offer, and waive informalities and minor irregularities in offers received. (e) Debriefings. If a postaward debriefing is given to requesting Offerors, the Government will disclose the following information, if applicable: (1) The agency's evaluation of the significant weak or deficient factors in the debriefed Offeror's offer. (2) The overall evaluated cost or price and technical rating of the successful Offeror and the debriefed Offeror and past performance information on the debriefed Offeror. (3) The overall ranking of all Offerors when any ranking was developed by the agency during source selection. (4) A summary of the rationale for award. (5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful Offeror. (6) Reasonable responses to relevant questions posed by the debriefed Offeror as to whether the agency followed source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities. (End of provision) 52.212-2 Evaluation-Commerical Products and Commercial Services (Feb 2026)(Deviation 2026-O0038) (a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers: 1.) Technical Acceptability 2.) Price 3.) Past Performance (b) Options (if applicable). The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s). (c) Notice of award. A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) 252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation. PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021) The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument." Definitions "Covered defense telecommunications equipment or services," "covered mission," "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation. Prohibition. Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Procedures The Offeror shall review the list of excluded parties in the System for Award Management (SAM) at https://www.sam.gov for entities that are excluded when providing any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted. Representation If in its annual representations and certifications in SAM the Offeror has represented in paragraph (c) of the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation: The Offeror represents that it will will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation. Disclosures If the Offeror has represented in paragraph (d) of this provision that it "will provide covered defense telecommunications equipment or services," the Offeror shall provide the following information as part of the offer: (1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable). (2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision. (3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known). (4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known). (End of provision) 252.232-7006 Wide Area WorkFlow Payment Instructions. WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) Definitions. As used in this clause "Department of Defense Activity Address Code (DoDAAC)" is a six-position code that uniquely identifies a unit, activity, or organization. "Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). "Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system. "Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. WAWF access. To access WAWF, the Contractor shall (1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site. (d)WAWF training. The Contractor should follow the training instructions of the WAWF Web Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/. (e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order: (1) Document type. The Contractor shall submit payment requests using the following document type(s): (i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher. (ii) For fixed price line items (A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer. ____ (Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.) (B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer. ____ (Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.) (iii) For customary progress payments based on costs incurred, submit a progress payment request. (iv) For performance based payments, submit a performance based payment request. (v) For commercial financing, submit a commercial financing request. (2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract. [Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.] (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC Issue by DoDAAC Admim DoDAAC Inspect by DoDAAC Ship to Code Ship from Code Mark for Code Service Approver (DoDAAC) Service Accepter (DoDAAC) Accept at Other (DoDAAC) LPO DoDAAC DCAA Auditor DoDAAC Other DoDAACs (*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.") (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).) (4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable. (5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. ____ (Contracting Officer: Insert applicable information or "Not applicable.") (2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed. (End of clause) 252.236-7001 Contract Drawings and Specifications. CONTRACT DRAWINGS AND SPECIFICATIONS (AUG 2000) (a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer. (b) The Contractor shall (1) Check all drawings furnished immediately upon receipt; (2) Compare all drawings and verify the figures before laying out the work; (3) Promptly notify the Contracting Officer of any discrepancies; (4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and (5) Reproduce and print contract drawings and specifications as needed. (c) In general- (1) Large-scale drawings shall govern small-scale drawings; and (2) The Contractor shall follow figures marked on drawings in preference to scale measurements. (d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications. (e) The work shall conform to the specifications and the contract drawings identified on the following index of drawings: Title File Drawing NO. (End of clause) Evaluation: Proposals will be evaluated in accordance with (IAW) RFO FAR 15.103-2 Lowest Price Technically Acceptable. The government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to this solicitation has the lowest dollar value while conforming to the technical requirements. The following factors will be used to evaluate offers: Technical capability of the proposal offered to meet Government requirements Please see attachments for salient characteristics of technical requirements Price: Services shall be priced with quantities and unit prices. A total price shall be included that details all services purchased including shipping materials. Past Performance: Offerors must submit two relevant/recent past performance credible sources. The government will evaluate potential offerors’ recent/relevant past performance to determine whether the offeror demonstrates a reasonable expectation of successful performance of the solicited requirement. The Government may employ AI as a tool to assist in the analysis and review of offeror proposals. AI tools may be used to support tasks such as summarizing proposal content, identifying compliance with request for task order proposal / solicitation requirements, and highlighting areas of potential strength, weakness, or risk. Notwithstanding the use of AI tools to support the evaluation process, all final evaluation judgements, including the assignment or assessment of adjectival ratings, best value determinations, and source selection decisions, will be made exclusively by duly appointed Government personnel. The Government retains sole responsibility for all inherently governmental functions and will not delegate decision making authority to any AI tool. The AI tools utilized by the Government will be employed in a manner consistent with applicable regulations that govern the protection of proprietary and source selection sensitive information. The AI tool will be an output-only system. Any generated report data is not saved. No proposal data will be transmitted to or processed by external, non-Government systems without appropriate safeguards and authorizations in place. Submission of Proposals: Quotations shall be submitted electronically to Kevin Morris & Trisha Scott via email at Kevin.M.Morris24.civ@army.mil and Trisha.R.Scott.civ@army.mil. All proposals are due on 19 August 2026 at 1600 EST. Proposals will only be accepted electronically via the email addresses provided above. Offerors shall submit a price proposal and technical proposal as two separate documents. A site visit is being offered on August 13th, 2026. Reach out to the aforementioned email address to confirm attendance and access requirements. All questions related to this RFP shall be submitted in writing not later than 14 August 2026 by 1600 EST to Kevin Morris via email at Kevin.M.Morris24.civ@army.mil and Trisha Scott via email at Trisha.R.Scott.civ@army.mil. For information regarding this combined synopsis/solicitation, please contact: Kevin Morris, Purchasing Agent Email: Kevin.M.Morris24.civ@army.mil

Full description on SAM.gov

Award Overview

Award Number

W911QY26CA056

Award Amount (SAM.gov award notice)

$27.5K

Award Date

Sep 1, 2026

Awardee

Awardee UEI

MMLYTN8LSET7

Awardee CAGE Code

3UJW9

Awardee Address

Chelsea, MA 02150, UNITED STATES

Original Solicitation

Notice ID: cdba0c8d77e04f638a1b98ded71f89c4

Posted Date: Sep 10, 2026

Original Response Deadline: Not specified

Contract Details

Contract data not yet available

Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (5)

  • QA Instron Update 2.xlsx

    11 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • QA Instron Update 1.xlsx

    9.6 KBAdded in Combined Synopsis/Solicitation version 2Posted
    Download
  • SOW Bldg5 Instron.pdf

    384 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • Instron E-1 04 07 2026.pdf

    103 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • Instron Installation Combined SynopSolicit.docx

    40 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download

Lifecycle

  1. 2
    Version 2Combined Synopsis/SolicitationArchived

    Installation of Instron Machine

    Notice d923d8c9a419425baba0e58032cea64d on SAM.gov

  2. 5
    Version 5Award NoticeArchivedCurrent

    Type changed from Combined Synopsis/Solicitation to Award Notice

    Installation of Instron Machine

    Notice cdba0c8d77e04f638a1b98ded71f89c4 on SAM.gov

Other notices for this solicitation

  1. Combined SynopsisRelated noticeAug 17, 2026

    Installation of Instron Machine

    Notice 4cfaa589a85c451daafd3431cb545e74 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The U.S. Army Corps of Engineers (USACE), Little Rock District (CESWL) announces its intent to solicit for an Indefinite Delivery/Indefinite Quantity (IDIQ), Multiple Award Task Order Contract (MATOC) for Design Build (DB) Construction Services in support of the Defense Health Agency?s (DHA) Sustainment, Restoration, and Modernization (SRM) program. See attached revised Pre-Solicitation Notice titled, Pre-Solicitation Notice_W9127S-26-R-A028_12Dec2025 for revised information. *Due to formatting errors within the solicitation, the evaluation criteria will also be posted as a separate attachment.
61%
Solicitation05/15/2026
The U.S. Army Corps of Engineers (USACE), Little Rock District (CESWL) announces its intent to solicit for an Indefinite Delivery/Indefinite Quantity (IDIQ), Multiple Award Task Order Contract (MATOC) for Design Build (DB) Construction Services in support of the Defense Health Agency?s (DHA) Sustainment, Restoration, and Modernization (SRM) program. See attached revised Pre-Solicitation Notice titled, Pre-Solicitation Notice_W9127S-26-R-A028_12Dec2025 for revised information.
61%
Pre-SolicitationOpen
SPECIAL NOTICE Fort Campbell Operation and Maintenance, Army (OMA) Construction and Related Facility Support Requirements Contractor Repository — Fort Campbell, KY (Federal Acquisition Regulation (FAR) 12.201-1(d) (DEVIATION 2026-O0028)) PURPOSE The Mission and Installation Contracting Command (MICC), Fort Campbell, KY, is issuing this Special Notice to identify small business concerns interested in receiving future request for quotations for various construction and related facility-support requirements at Fort Campbell, KY. In accordance with Federal Acquisition Regulation (FAR) 12.201-1(d) (DEVIATION 2026-O0028), the Government intends to establish and maintain a repository of interested and qualified small businesses concerns. The repository will be used to efficiently distribute future requirement-specific requests for quotations to firms that respond to this notice and represent that they can perform the applicable work. The Government’s objectives are to: I. Reduce administrative costs and procurement lead time; II. Improve opportunities for small business concerns; III. Promote efficiency and economy in contracting; and IV. Avoid unnecessary burdens for the Government and contractors. This Special Notice is not a solicitation, request for quotations or commitment by the Government to issue a purchase order (PO). The Government will not reimburse respondents for any costs associated with preparation or submission of a response to this notice. 1. Anticipated Requirements The Government anticipates requirements primarily associated with NAICS Code 236220, Commercial and Institutional Building Construction, including repair, alteration, maintenance, minor construction, and related facility-support work. Although NAICS Code 236220 (Size Standard: $45.0 Million. Product Service Code (PSC): Z2JZ - Repair or alteration of miscellaneous buildings.) is identified as the primary anticipated NAICS code for this notice. Individual future requirements may require a different NAICS code, product service code (PSC), size standard, scope, licensing requirement, bonding threshold, or other requirement appropriate to the specific work. Anticipated work may include, but is not limited to: General construction, repair, and alteration of facilities; Carpentry, masonry, welding, roofing, painting, electrical, plumbing, and heating, ventilation, and air conditioning (HVAC) work; Civil, site, drainage, earthwork, and related utility work; Demolition and removal services; Hoist and crane inspection, maintenance, repair, and related services; Environmental, energy-conservation, logistical, and other facility-support requirements; and Other construction or service requirements supporting Fort Campbell facilities and infrastructure. 2. Geographic Area Performance will occur at Fort Campbell, KY, (Zip Code: 42223) and may include associated facilities located within: Tennessee: Montgomery and Stewart County Kentucky: Christian and Trigg County 3. Acquisition, Eligibility, and Registration Requirements The Government anticipates executing future requirements through individual purchase orders (POs) on an as-needed basis. Individual POs are anticipated to range from $2,000 to $9,000,000. Each individual PO or associated request for quotation will specify the applicable statement of work, performance location, completion date or period of performance, submission instructions, evaluation criteria, and other terms and conditions. To be considered for future opportunities, interested contractors must meet and maintain the following requirements, as applicable to each individual requirement: Small Business Participation: This initiative is focused on expanding opportunities for small business concerns. The Government encourages participation from all small business socioeconomic categories, including Small Business (SB), Small Disadvantaged Business (SDB), 8(a) Business Development Program participants, Historically Underutilized Business Zone (HUBZone) small businesses, Service-Disabled Veteran-Owned Small Businesses (SDVOSB), and Women-Owned Small Businesses (WOSB). SAM Registration: Contractors must maintain an active registration in the System for Award Management (SAM) and possess a valid Unique Entity Identifier (UEI) to be eligible for award. Installation Access: Contractors must be able to obtain and maintain the personnel credentials, vehicle access, insurance, and other installation-access requirements necessary to perform work at Fort Campbell. Requirement-specific access instructions will be provided for each individual PO, as applicable. Insurance and Bonding: Contractors must be able to provide current and valid proof of general liability insurance and meet applicable bonding requirements at the time of award. Any required bid guarantees, performance bonds, payment bonds, or other insurance and bonding documentation will be identified in the individual request for quotation or PO. Inclusion in the contractor repository does not constitute prequalification, guarantee receipt of a future request for quotation, or guarantee award of a PO. 4. Repository Process and Future Requirement Notices This Special Notice will remain open for 12 months from the date of posting, unless cancelled earlier by the Government. The Government may renew or repost the notice annually, as needed. Firms responding to this notice may be included in the Government’s repository of interested contractors. Inclusion in the repository: Does not constitute prequalification; Does not establish a contract, blanket purchase agreement, ordering agreement, or other contractual instrument; Does not guarantee that a firm will receive a future requirement notice, be invited to quote, or receive an award; and Does not relieve a firm from meeting the terms, conditions, and evaluation criteria established for each individual requirement. When a requirement is identified that falls within the scope of this notice, the Government intends to distribute a requirement-specific notice by email to repository firms identified as potentially capable of performing that work. Each requirement-specific notice may include: A scoping statement or description of the requirement; Applicable NAICS code, PSC, and size standard; Site-visit date, time, location, and access instructions, if applicable; Submission instructions and proposal due date; Required statement of work (SOW), technical approach, pricing, or other quote content; Evaluation criteria and basis for award; and Any applicable bonding, licensing, insurance, safety, security, or other performance requirements. Site visits may be conducted for individual requirements. Attendance is not mandatory; however, attendance is strongly encouraged. The Government will evaluate quotations and make any award in accordance with the procedures, terms, and evaluation criteria stated in the individual requirement-specific notice. 5. Response Instructions Interested small business concerns should submit a capability statement by email to MICCIDEA@army.mil with the subject line: Response to Fort Campbell RFO 12.201-1(d) Contractor Repository – [Company Name] In addition to the email, please complete the repository form. The link (IDEAS Construction Repository Form) and a QR code have been provided. Responses should only include the following: I. Company Information Legal business name; Physical and mailing address; Unique Entity Identifier (UEI); Commercial and Government Entity (CAGE) code; II. Point of Contact (POC) Information Primary point of contact, title, telephone number(s), and email address. (This email and information provided on the form, will be used to send future project opportunities) Point of contact, title, telephone number(s), and email address of individual who can oblige the company. III. Socioeconomic Status Applicable socioeconomic designations, if any, such as small business, 8(a), HUBZone, service-disabled veteran-owned small business (SDVOSB), women-owned small business (WOSB), or small disadvantaged business (SDB). NOTE: This opportunity is only open to Small Businesses. IV. Bonding and Licensing Single-project and aggregate bonding capacity, if applicable; Relevant state or local licenses, certifications, and trade credentials; Any relevant safety, quality-control, or inspection certifications. V. SAM Registration Confirmation that the firm is registered in the System for Award Management (SAM) and that its registration is active, or the firm’s plan and anticipated date to obtain active registration before award. 6. General Contractor Intake Form MICC Fort Campbell maintains a General Contractor Intake Form for any business interested in doing business with Fort Campbell. The General Contractor Intake Form, available through the link (General Contractor Intake Form) below under “Links,” is separate from the MICCFTCINNOVATION contractor repository established under this Special Notice and does not limit participation to any particular North American Industry Classification System (NAICS) code, product service code (PSC), industry, or type of requirement. Please Note: Completing the General Contractor Intake Form via the online link is entirely self-contained. If completing the General Contractor Intake Form, it is not necessary to send an email per the instructions to the MICCIDEA@army.mil inbox. The email submission instructions in Section 5 are reserved solely for firms to which this Special Notice applies. Businesses may complete the General Contractor Intake Form to provide company and capability information for inclusion in a centralized contractor repository. The Government uses information submitted through this form to identify potential sources suited for specific requirements, support rapid acquisition strategies, and expedite market research for short-fuse or emergent operational needs. The Government may also use this repository to directly solicit and compete requirements among qualified, registered contractors. Contractor capability statements and data play a vital role in our process, as they help the Government determine the appropriate market research, notification, competition, and solicitation procedures for each individual requirement. However, submission of the General Contractor Intake Form, or inclusion in the general contractor repository, does not constitute prequalification; establish a contract, blanket purchase agreement, ordering agreement, or other contractual instrument; or guarantee that a firm will receive notice of a future requirement, be invited to quote, or receive an award. 7. Notice Disclaimer The Government may update this notice or issue clarifications as necessary. Firms are responsible for monitoring SAM.gov for amendments, updates, or replacement notices. This Special Notice is issued for market research and planning purposes. It does not constitute a solicitation or an obligation on the part of the Government. The Government may modify, suspend, cancel, or discontinue this notice and the associated repository process at any time. Note: Please do not submit redundant inquiries. All updates and future steps regarding the repository will be communicated directly to the email addresses gathered through this notice.
59%
Special Notice09/16/2027
THIS NOTICE IS PROVIDED FOR INFORMATION ONLY: THIS SYNOPSIS IS ONLY A NOTIFICATION A SOLICITATION IS ANTICIPATED AND FORTHCOMING. The anticipated solicitation is associated with the iDBIO MATOC 6.0, W9127S25R021, W9127S26RA044. The solicitation number has been updated to reflect W9127S27RA018. TITLE: Indefinite Delivery/Indefinite Quantity (IDIQ) Multiple Award Task Order Contracts (MATOC) For Integrated Design-Build Initial Outfitting iDBIO In Support of Military Health System (MHS). DESCRIPTION: THIS ACQUISITION IS FOR FIRM-FIXED PRICE (FFP) INDEFINITE DELIVERY/INDEFINITE QUANTITY (IDIQ) MULTIPLE AWARD TASK ORDER CONTRACTS (MATOC) FOR DESIGN BUILD (DB) CONSTRUCTION. The MHS relies on the support of the Defense Health Agency (DHA) and the US Army Corps of Engineers (USACE) – Little Rock District (CESWL) to execute its health facility program. A means to manage this program is via Indefinite Delivery/Indefinite Quantity (IDIQ) Multiple Award Task Order Contracts (MATOC). Under these contracts, the contractor provides all necessary labor, material, supervision, and equipment for the design, construction, repair/alteration, and outfitting to sustain, restore, and/or modernize hospitals, clinics, medical administration buildings, ambulatory health facilities, medical warehouses, medical labs, biological engineering labs, dental clinics, veterinary clinics, wellness centers, and any other healthcare buildings, using recapitalization funding and processes. The Scope of Work (SOW) for the resultant contracts will primarily be associated with the renovation of existing facilities but may also include major repair and new construction. Work may include mechanical (to include medical gas and plumbing), electrical, fire protection, architectural (to include building envelope), conveying systems, structural (to include antiterrorism/force protection), and civil/site infrastructure. This requirement will be performed within the continental United States (CONUS), Alaska, Hawaii and U.S. Territories (OCONUS). This work is performed in ongoing active healthcare facilities. This acquisition will be a firm-fixed price (FFP), indefinite delivery/indefinite quantity (IDIQ), multiple award task order (MATOC), for design-build construction services. It will be procured using the two- phase design-build selection procedures in accordance with Revolutionary FAR Overhaul (RFO) Federal Acquisition Regulation (FAR) 36.3. The acquisition is open to both unrestricted and small businesses. A single pool of both unrestricted and small businesses will be established with a shared capacity of $3B. The period of performance will consist of a total ordering period of seven (7) years; five-year base ordering period and a two-year option ordering period. Most projects (task orders) will range between $2M and $90M with an average performance period of 2-3 years. These services include cradle to grave project management services, design services, warehousing capabilities, delivery, installation, inventory, warranty services, commissioning and training on all new equipment/systems. The contractor must also be able to fulfill fast-tracked timelines. Timely completion of upgrades and renovations is paramount to maintaining quality, safe, infection-free facilities. Most projects will involve either multi-phased renovation projects all while maintaining on-going healthcare operations or new construction. DHA Program anticipates around six (6) task orders will be executed annually (not excluding subsequent modifications) so Contractor’s may be required to simultaneously delivery multiple projects at different locations. Projects will be mostly for Air Force clients, but other Federal/Department of Defense clients (such as Army) may also use the contract so familiarity with DOD and AF criteria is required. Using integrated project delivery (IPD) principles and Lean processes, the Contractor’s and their partners/subcontractors will be required to work closely with multiple stakeholders to include users, owner and installation representatives, government subject matter experts, architectural review boards, etc. In accordance with RFO 36.3, Two-Phase Design-Build Selection Procedures, a Two-Phase source selection process will be used to evaluate the Offerors for award. In Phase I, interested firms or joint venture entities (referred to as “Offerors”) may submit certain specified performance proposals, demonstrating their capability to successfully execute the DB contract resulting from this solicitation. The Government will evaluate the performance capability in accordance with the criteria described in the Phase 1 solicitation documents. Those offerors who are considered the most highly qualified during Phase I (a target of three (3) small business and five (5) unrestricted offerors) will be requested to submit the proposal requirements for Phase II. Specific evaluation criteria will be provided in the solicitation documents. In Phase II, the selected Offerors will submit certain specified technical design proposals for an initial task order and a price proposal. The Government will evaluate the Phase II proposals in accordance with the criteria described for Phase II in the solicitation documents, and award to the responsible Offerors, whose proposals conforms with all the terms and conditions of the solicitation and whose proposals are determined to represent the overall best value to the Government. The Government will post the solicitation and all subsequent amendments to the Government-Wide Point of Entry (GPE) SAM.GOV Web Site https://www.sam.gov. It is the Offeror's sole responsibility to obtain this solicitation and any subsequent amendments through this website. Offerors are encouraged to visit this web site and become familiar with its content and functionality prior to the solicitation issue date. Prospective Offerors must provide all information necessary to receive posting notifications. Offerors must be registered and have an active, valid registration in the System for Award Management (SAM) database. To obtain information on CCR, ORCA, & EPLS and/or how to register, visit the following web site: https://www.sam.gov. Estimated solicitation issue date is on or about November 30, 2026, Phase I Proposals are anticipated to be due on or about January 7, 2027. The North American Industry Classification System code for this procurement is 236220 - Commercial and Institutional Building Construction. The US Small Business Administration Size Standard is $45 Million. The Standard Industrial Classification (SIC) Code is 1542 - General Contractors-Nonresidential Buildings, Other than Industrial Buildings and Warehouses. Federal Service Code (FSC Code): Z2DA
59%
Pre-Solicitation01/07/2027
Invitation for Bids (IFB) Set-Aside for Small Businesses NAICS Code: 236220 - Commercial and Institutional Building Construction - The Massachusetts National Guard intends to issue an Invitation for Bids to award a single firm fixed-price contract for services, non-personal, to provide all plant, labor, transportation, materials, tools, equipment, appliances and supervision necessary for the Construction of the comprehensive HVAC system replacement and associated facility, electrical, fire protection, and building envelope improvements at Building 52, HAZMART at 810 Southampton Rd, Westfield, Massachusetts, United States, 01085. The contract duration will be 365 calendar days after notice to proceed to include inspection and punch list. This project is set aside 100% for Small Businesses. The North American Industry Classification System (NAICS) Code is 236220, with a small business size standard of $45,000,000. The magnitude of construction is $200,000 and $300,00. The tentative date for issuing the solicitation is within the next 30 days (on-or-about December 2026). The tentative date for the pre-bid conference is approximately two weeks following solicitation issuance, time and location to be provided in the solicitation. Interested contractors are encouraged to attend and shall follow conference registration and base access requirements shown in the solicitation. A site visit will follow the pre-bid conference. All questions for the pre-bid conference must be submitted by the deadline specified in the solicitation. The bid opening date is tentatively planned for approximately 30 days following the issuance of the solicitation. Actual dates and times will be identified in the solicitation. Interested offerors must be registered in the System for Award Management (SAM). To register go to SAM.gov. Instructions for registering are on the website (there is no fee for registration). The solicitation and associated information will be available only from the Contract Opportunities page at SAM.gov. Your attention is directed to FAR clause 52.219-14(e)(3) (DEVIATION 2021-O0008), LIMITATIONS ON SUBCONTRACTING, which states: -By submission of an offer and execution of a contract, the Offeror/Contractor agrees in performance of the contract for General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractors 85 percent subcontract amount that cannot be exceeded-. In accordance with RFO FAR 36.101-4, the following information is provided: (a) There are no agency-specific policies or procedures that apply to the definitization of equitable adjustments for change orders under construction contracts. (b) No data is available regarding the timely definitization of equitable adjustments for change orders under construction contracts. Tridium System (with installation by SNE Building Inc) and Monaco Enterprises Fire Alarm System are sole source/brand name specific for compatibility with existing installation systems (noted justifications will be included with solicitation).DISCLAIMER: The official plans and specifications are located on the official government webpage and the Government is not liable for information furnished by any other source. Amendments, if/when issued, will be posted to Contract Opportunities for electronic downloading. This will normally be the only method of distributing amendments prior to closing; therefore, it is the offerors responsibility to check the website periodically for any amendments to the solicitation. Websites are occasionally inaccessible for various reasons. The Government is not responsible for any loss of Internet connectivity or for an offerors inability to access the documents posted on the referenced web pages. The Government will not issue paper copies.
57%
Pre-SolicitationOpen

Additional Details

Solicitation Number

W911QY-26-R-INST

Archive Date

Sep 16, 2026

Office Address

NATICK, MA, 01760-5011