GovChime
Notice ID: d0b43b732eb74c8990e39bd555bcc55bSolicitationArchived

10 AEDs (Defribillators)

Archived on September 17, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM CDT
Posted
August 31, 2025
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
339113: Surgical Appliance and Supplies Manufacturing
Agency
National Aeronautics and Space Administration

Notice details

Office
NASA SHARED SERVICES CENTER
Last updated
Nov 9, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
80NSSC25913705Q
Notice ID
d0b43b732eb74c8990e39bd555bcc55b

Description

SEE THE ATTACHED RFQ AND SOW.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (2)

  • SATPC0039626 Tab 10 OPEN MARKET RFQ.pdf

    536 KBAdded in Solicitation version 1Posted
    Download
  • SATPC0039626 TAB 10 SOW REDACTED.pdf

    50 KBAdded in Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1SolicitationArchived

    10 AEDs (Defribillators)

    Notice e21a848628e7475d9df9b5aedf27929a on SAM.gov

  2. 3
    Version 3SolicitationArchivedCurrent

    10 AEDs (Defribillators)

    Notice d0b43b732eb74c8990e39bd555bcc55b on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Sources Sought Notice Sources Sought Notice Sources Sought Notice - RFI Attachment Sources Sought Notice Page 1 or 4 DISCLAIMER: THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS SYNOPSIS IS NOT A REQUEST FOR QUOTE, PROPOSAL, OR BID. This notice is not a solicitation as defined by FAR 2.101, therefore it shall not be construed as a commitment by the government to enter into a contract, nor does it restrict the government to an acquisition approach. All information contained in this Request for Information (RFI) is preliminary as well as subject to amendment and is in no way binding on the government. Information submitted in response to this notice is voluntary; the government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the government. The government is requesting that restrictive or proprietary markings not be used in response to this notice. If a solicitation is released, it will be synopsized in the Federal Contract Opportunities website or General Services Administration (GSA). It is the responsibility of the interested parties to monitor these sites for additional information pertaining to this RFI. 1. Title: Shukla Universal Screw Extraction Systems (Brand Name or Equal) 2. Purpose: The Department of Veterans Affairs (VA), Network Contracting Office 16, is conducting market research to identify qualified sources capable of furnishing the brand-name items listed below or equal products for the Michael E. DeBakey VA Medical Center, Houston, Texas. This notice is issued for planning purposes only and is not a solicitation, request for quotation, invitation for bid, or promise of a future procurement. The Government will not pay for information submitted in response to this notice. The Operative Care Line requires orthopedic extraction and removal systems used in trauma, total joint, spine, shoulder, and related surgical procedures. The current clinical need is to replace existing instrumentation while preserving safe integration with the facility s established surgical workflows and currently owned Shukla Medical sets. Item Brand-Name Reference Description Qty/Unit 1 S9MAXI-TR Extraction System, Trauma Maxi 1 EA 2 S9MINI Removal System, Screw, Mini, Small Bone Screw V4 2 EA 3 S9SCREW Removal System, Screw, Broken & Stripped V3; extractors, 4 each; drill bits, 2 each 1 EA 4 S9KNEE Extraction System, Knee 1 EA 5 S9BLADE Blade System, Osteotome 2 EA 6 S9HIP Extraction System, Hip Stem 1 EA 7 S9SPINE-PLUS Removal System, Spine, Cervical, Thoracic, and Lumbar; includes two instrument trays V4 1 EA 8 S9SHLDR Extraction System, Shoulder 1 EA 9 S9SHLDR-BLADE Blade System, Shoulder, Flexible Osteotome 1 EA 3. Minimum Salient Characteristics for Equal Products: Provide complete, procedure-ready systems that perform the same clinical function as each corresponding brand-name reference item. Include the specialized drivers, extractors, drill bits, osteotomes, handles, adapters, and organization/sterilization trays ordinarily required for the identified system s intended surgical use. Be designed for precision removal and, where applicable, insertion of orthopedic hardware, including large bone screws and broken or stripped screws. For the spine system, support cervical, thoracic, and lumbar applications and include two instrument trays. For shoulder and osteotome systems, provide instrumentation suitable for the stated shoulder extraction or flexible osteotome function. Be compatible with the medical center s existing instruments, trays, sterilization processes, and clinical workflow without requiring undocumented adapters, modifications, or additional capital equipment. The respondent shall identify any exceptions or additional items required for full functionality. Be reusable surgical-grade instrumentation and capable of cleaning, disinfection, and steam sterilization consistent with VA facility practices. Provide the manufacturer s validated reprocessing and sterilization instructions. Be supplied new, not used or refurbished, with product labeling, instructions for use, and applicable warranty and support information. Be commercially available and compliant with all applicable FDA requirements for the offered intended use. Respondents shall identify the applicable clearance, listing, registration, or exemption status. The Small Business Administration (SBA) size standard for the North American Industry Classification System (NAICS) code is 339113 Surgical Appliance and Supplies Manufacturing with a size standard of 800 employees. Product Supply Code (PSC) 6515 Medical and Surgical Instruments, Equipment, and Supplies. The anticipated type of contract shall be a Single Award, Firm Fixed Price. 3. Responses Requested: The following questions must be answered in response to this RFI. Answers that are not provided shall be considered non-responsive to the RFI: Name of potential Contractor that possess the capability to fulfill this requirement. Contractors shall also provide the following: Point(s) of contact name: _______________________________________________ Address: ____________________________________________________ Telephone number: ___________________________________________ Email address: _______________________________________________ UEI #: ____________________________________ CAGE Code: _______________________________ Is your company considered a small business concern, SB, SDVOSB, VOSB, HUBZone, or 8A concern, with the requisite NAICS code identified above? Can your company provide training as outlined in the attached SOW? Is your company available under any Government Wide Agency Contract (GWAC), Solutions for Enterprise-Wide Procurement (SEWP), National Acquisition Center (NAC), GSA Schedule, Federal Supply Schedule (FSS), Indefinite Delivery Indefinite Quantity (IDIQ), and/or Blanket Purchase Agreement (BPA)? The VA does not accept grey market items; therefore, the Vendor must attach an Authorized Distribution Letter as an approved and authorized vendor on OEM letterhead by the manufacturer as evidence of proof to be viewed by the government to be considered as part of the Market Research and responsiveness to this Sources Sought notice. 4. Opportunity/Market Pricing: The MEDVAMC is seeking information from potential vendors on their ability to provide the required items/equipment. THIS IS A SOURCES SOUGHT REQUEST FOR INFORMATION (RFI) ONLY. Small Business concerns are encouraged to provide responses to this RFI in order to assist the MEDVAMC in determining potential levels of competition and general market pricing available in the industry. Vendors are requested to submit estimated market research pricing along with their responses to the above. The estimated pricing will be considered when determining the procurement strategy for the forthcoming solicitation. 5. RFI responses are due by 3:00pm Central Time by close date listed above The subject line shall reference that Request for Information (RFI) number above. NO SOLICITATION EXISTS AT THIS TIME. Please provide the information you deem relevant in order to respond to the specific inquiries of the RFI. Information provided will be used solely by MEDVAMC as Market Research and will not be released outside of the MEDVAMC Purchasing and Contracting Team. If no responses to this notice are received from an authorized distributor of the cited brand name items listed above, then this action will be sole sourced to the manufacturer. 6. Contact Information: Contract Specialist Robert (Dustan) Arabie robert.arabie@va.gov Your response to this notice is greatly appreciated!
-Market Research11/12/2026
1. Title: Stryker PowerPro2 Ambulance Cot System 2. Purpose: The Network Contracting Office (NCO) 16 located at 5075 Westheimer Road, Galleria Financial Center, Suite 750, Houston, Texas, hereby issues the following Sources Sought to Request Information (RFI) with the intent of determining the contractor interest, capabilities, qualifications of potential businesses, nonmanufacturer rule compliance, Buy American Act compliance, Trade Agreement compliance and estimated industry pricing information for market research and estimated budgetary purpose for Stryker PowerPro2 Ambulance Cot System. Contractor shall provide all shipping, installation (if required), equipment, personnel, labor and testing for name brand. This Sources Sought is published for market research purposes. This Sources Sought will be used to determine if a set-aside for any small business program is appropriate. Government anticipates competitive, firm fixed price contract. Please review this announcement, respond to questions below and review all attachments in their entirety. Government requests that interested offerors complete all questions below, provide required documentation, descriptive literature and authorization letter as described below. The Government is in no way obligated to do business with or to enter into any form of contract with any person, firm or other entity that receives or responds to this announcement. a. Contractors shall provide their point(s) of contact name, address, telephone number, and email address, and the company's business size, and SAM Unique Entity Identification Number. b. Is your company a small business, SDBs, HUBZone, or 8A concern? Please provide proof of qualifications. b. Does your company meet all required four prong factors for the Nonmanufacturer Rule (NMR) per guidance of SBA and 13 C.F.R. § 121.406 Offer must answer all questions below. 1. Does your company exceed the 1250 employee alternative size standard for nonmanufacturers? ___ 2. Is your company primarily engaged in the retail or wholesale trade and normally sells the type of products being supplied? __________ 3. Does your company must take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice? __________ 4. Does your company supply the end products of a small business manufacturer or processor made in the United States? _____________ c. Is your company considered small under the NAICS Code 339112 d. Do you (offer) manufacture the product yourself or a distributor of the items being researched above?____ e. Are you an authorized distributor/reseller? Provide evidence from original equipment manufacturer (OEM). f. Do you (offer) supply a product manufactured by another domestic small business, if it is a nonmanufacturer? g. Do you (offer) supply the product of any sized manufacturer if SBA has granted a waiver to the nonmanufacturer rule? h. Is your (offer) Buy American Certificate completed in SAM? Please provide evidence with response. i. Is your (offer) Trade Agreement Certificate completed in SAM? Please provide evidence with response. j. Information for the name brand or equal product being requested, is it manufactured outside the US-Domestic non-available? k. Information for the name brand or equal product being requested, is it a foreign manufactured end product under the trade agreement? l. What is your schedule of delivery after receipt of order for the name brand or equal product? m. For the name brand or equal product required, Is your company available under any; Government Wide Agency Contract (GWAC) General Services Administration Schedules (GSA) Indefinite Delivery Indefinite Quantity (IDIQ) Blanket Purchase Agreement (BPA) If so, please list the contract number for name brand or equal product. n. Provide descriptive literature demonstrating ability to meet all of the requirement/salient characteristics listed if other than brand name product is being offered. Please provide list of contracts for commercial, federal, state, and local governments. Listed contracts shall provide communication on the government requirement illustrating the capability for comparison. to the name brand or equal product meeting the specific requirements per the draft Statement of Work. o. Contractors shall provide an estimated industry pricing for name brand product for market research and budgetary purposes. 5. Opportunity: NCO 16 is seeking information from potential contractors on their ability to provide this service. THIS IS A SOURCES SOUGHT FOR REQUEST INFORMATION (RFI) ONLY. Small Business Concerns are encouraged to provide responses to this Sources Sought in order to assist the MEDVAMC in determining potential levels of competition available in the industry. Contractors shall possess the capability to meet all requirements and objectives. 6. Instructions and Response Guidelines: Sources Sought responses are due by Nov 11, 2026, at 10:00 AM(CST) via email to rhonda.gibson2@va.gov. All Questions shall be submitted by Nov 9, 2026, at 10:00 AM (CST) via email to Rhonda.gibson2@va.gov. Telephone requests or inquires will not be accepted. Public Information will not be provided and shall be utilized to the full extent possible. This a New Requirement. The subject line shall read: 36C25627Q0134-RFI-Sources Sought- Stryker PowerPro2 Ambulance Cot System Overton Brooks Medical Center, Shreveport, LA 71101. NO SOLICITATION EXISTS AT THIS TIME. There is no page limitation on subparagraphs 5(a) - 5(o). Please provide the information you deem relevant in order to respond to the specific inquiries of the Sources Sought. Information provided will be used solely by MEDVAMC as "market research" and will not be released outside of the MEDVAMC Purchasing and Contract Team. This Sources Sought notice does not constitute a Request for Proposal (RFP), Invitation for Bid (IFB), or Request for Quotation (RFQ), and it is not to be construed as a commitment by the Government to enter into a contract, nor will the Government pay for the information submitted in response to this request. All information contained in this Sources Sought is preliminary as well as subject to modification and is in no way binding on the Government. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the U.S. Government to form a binding contract. If a solicitation is released, it will be synopsized on Contracting Opportunities (https://beta.sam.gov/) website or GSA. It is the responsibility of the interested parties to monitor these sites for additional information pertaining to this Sources Sought, or future RFP/RFQ. 7. Contact Information: Contract Specialist, Rhonda Gibson Email address: Rhonda.gibson2@va.gov Your responses to this notice are appreciated. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES/PROPOSALS; however, any firm that believes it can meet the requirements may provide answers, responses and give written notification prior to the response due date and time. Supporting evidence and responses must be furnished in enough detail to demonstrate the ability to perform the requirements. ***** End Word Document *******
-Market Research11/11/2026
PLEASE SEE THE ATTACHED DOCUMENTS FOR DETAILS. QUOTES WILL NOT BE REVIEWED OR ACCEPTED. IF YOU FEEL YOUR COMPANY CAN PROVIDE THIS PRODUCT, SUBMIT A CAPABILITY STATEMENT.
-Special Notice11/02/2026
Amendment 001 to Solicitation #36C25927Q0025 (Air-powered chiropractic tables) This amendment s purpose is to list and answer the questions submitted by the questions deadline as specified in the solicitation. Questions and Answers: CLIN 0018 is listed as "Delivery," but the solicitation states freight shall be added to another line item and not be its own line item. How should offerors handle delivery/freight pricing? Freight costs may be added to the delivery line item if the offeror deems appropriate. Is any on-site installation or assembly required at the SLC or Ogden facilities, or is this delivery of the equipment only? The expectation is that the tables are pre-assembled and will be easy to place in the clinics. However, if the tables are NOT pre-assembled, the offeror should include installation/assembly fees into the delivery line item and ensure it is noted. For an "or equal" product, will an Authorized Distributor Letter from the manufacturer of the equal product we quote satisfy VAAR 852.212-71(c), or must the letter be from Hill Laboratories specifically? The Authorized Distributor Letter must be from the manufacturer of the brand the offeror is proposing. Offerors would only need to provide a letter from Hill Laboratories IF they are offering the Government the Hill Laboratories product. Installation scope: The section is titled "Delivery and Installation," but no installation tasks are listed. Should the price include inside delivery to the treatment room, uncrating, assembly, set-up/leveling, functional testing, packaging and debris removal, and staff in-service training? If so, please name the rooms and floors at each site. The expectation is for the tables to be delivered pre-assembled to the facility. The VA staff would then take possession of the items and move them to the clinic space. The Offeror should include installation/assembly costs IF the tables are not delivered pre-assembled. Delivery windows and access: Please give the allowed delivery days and hours, receiving dock or entrance, elevator access, any check-in or escort steps, and a point of contact at each site (George E. Wahlen VAMC, 500 Foothill Dr., Salt Lake City; Ogden CBOC, 2945 South Washington Blvd., Suite 1, South Ogden). Are deliveries to the 2 sites allowed on different dates? Deliveries may occur on different dates if needed. Deliveries shall be made between 0700 and 1700 Mondays through Fridays (except on Federal holidays). Required delivery date: Is there a required or target delivery date, or a maximum lead time in calendar days after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. Freight vs. line 0018: The RFQ says freight shall be added to another line item and not be its own line item, but line 0018 is "Delivery." Should delivery/installation be priced on line 0018, or included in line 0001 with 0018 shown as "Included with line item 0001"? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Removal of existing tables: Is the contractor expected to remove and dispose of any existing tables at either site? If yes, how many, which models, and is there a VA disposal process? No removal or disposal services are required for this requirement. "Or equal" salient characteristics: The RFQ says "air powered - NOT pneumatic or hydraulic." Air-powered systems run on compressed air, which is usually described as pneumatic. Please clarify what this requirement excludes so that "equal" products can be judged fairly. Salient characteristics updated to: Must be air powered/pneumatic NOT hydraulic Option lines: For an "equal" product, may an option that is standard on that product be shown as "Included with line item 0001"? Must each brand-name part number (for example, AF-F15, 92CS, 97) be matched one for one? Each line item does not need to be matched one for one. However, the Offeror should ensure the components listed in the line items are included in the table. Please ensure a note is provided if the brochures/specification documents do not clearly show those items are included with the table. Height and width: Does a maximum height of exactly 29" meet the requirement, and is the 27" width (line 0017) the required width? The tables must be able to reach at least 29 but if the table is able to exceed this height (up to ~ 32 ) that would be preferred. The width dimension of the table must be between 27 and 33 Authorized distributor letter: Is the OEM letter (VAAR 852.212-71(c)) required for all offerors who are not the OEM, including authorized dealers? Must it name this solicitation, or is a general authorization letter on OEM letterhead acceptable? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Contractor access/PIV: Clauses 852.204-70/72 are included, but all risk levels are marked N/a. Please confirm that delivery and installation staff will not need a background check or PIV card, and that a visitor badge and escort is enough? The expectation is for the tables to be pre-assembled and the Offeror would only need to deliver the item to the warehouse dock/facility. No access to the facility is anticipated although the VA staff may accompany the Offeror if delivery/installation/assembly is needed. Warranty/service: Should on-site labor warranty or service be included, or only the minimum 1 year parts warranty? Minimum 1-year parts warranty; additional on-site and/or service warranty appreciated but not mandatory Page limits: The RFQ mentions page limitations but does not state any. Is there a page limit for any volume? No page limits are present for this solicitation. However, Offerors should be mindful of potential email size limitations. Option to Extend Services (52.217-8) and Service Contract Labor Standards (52.222-41/43) are included. Please confirm whether they apply to this one-time supply purchase with installation. FAR 52.217-8 was included in case an extension to the period of performance is needed. SCLS does not apply to this requirement. Deadline time zone. The RFQ states quotes are due 12:00 PM MST on 30 October 2026, while SAM.gov lists the response deadline at UTC-06:00 (MDT). Please confirm the controlling local time for submission. The deadline is 12pm MT on 10/30/2026. Delivery pricing. The instructions state freight shall be added to another line item and not be its own line item, yet the schedule includes line item 0018 "Delivery." Should delivery/freight be priced in line item 0018, or folded into line item 0001 with 0018 marked accordingly? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Installation. Is installation/set-up of the tables required at either delivery location (Salt Lake City and Ogden), or is delivery only required? If set-up is required, will VA personnel escort access be arranged through the receiving facility? If the tables are pre-assembled, installation shall not be required. However, if assembly of the table is required, the Offeror should include those costs in their quote and should plan to be onsite to install/assemble each table. VA staff may escort visitors IF installation/assembly of the product is needed. This may be discussed during the post-award meeting. Authorized distributor letter. Must the VAAR 852.212-71(c) letter from the OEM name the offeror specifically, or is a general letter of authorization from the manufacturer sufficient? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Line item 0013 option code. Line item 0013 references option "92CSAF" (rocker foot pedal substitute for air at foot end). Please confirm this is the correct Hill Laboratories option code for the requested item. Yes, this is the correct code Installation: the delivery section is titled "Delivery and Installation" and asks for lead time "including installation, if applicable." Is any installation, assembly or setup required, or is delivery to the receiving area at each site sufficient? The station team will either expect the table to come pre-assembled OR the Offeror will need to plan to assemble the tables onsite. Any fees associated with installation/assembly should be included in the delivery line item. If the tables are already pre-assembled, then the VA staff will be able to take possession of the item upon delivery and then they will move the table to the clinic location. Authorized distributor letter (VAAR 852.212-71(c)): if the offeror is not the manufacturer, will a letter from the manufacturer authorizing the offeror to supply this specific order satisfy the requirement? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Required delivery date: is there a required delivery date or a maximum acceptable lead time after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. May a small-business equipment distributor registered under NAICS 423450 submit a quotation for this solicitation, which is assigned NAICS 339113? NAICS 423450 shows a size standard of 200 employees while the NAICS for this requirement, 339113, is 800 employees. Therefore, as long as the Government is able to verify the Offeror has a NAICS in which it confirms their company size is below 800 employees, the Offeror should not be considered ineligible Does the SBA nonmanufacturer rule apply to this procurement, and if so, is a waiver available? Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. Would an authorized reseller offering the specified Hill Laboratories equipment qualify, provided all technical specifications and manufacturer authorization requirements are satisfied? Yes. Offerors who obtain an authorized distributor letter from Hill Laboratories may submit a quote package to include the Hill Laboratories products. Air system: The specifications require air power but exclude pneumatic systems. Is the Hill Air Flex II s compressed-air system acceptable? The previous specification had a typo the system should be air-powered/pneumatic system. Headpiece: CLIN 0004 specifies an air-activated forward/straight drop, while the salient characteristics require a manual drop. Which is required? Please also confirm the intended configuration for AF-F22 headpiece motion with AF-F27 automatic distraction. Air powered drop is required. The distraction motion required is intended to stretch the neck in a superior motion like a decompression table would do and requires a headpiece to attach to the table so this distraction therapy can be done. See example video of how this feature should operate. https://www.youtube.com/watch?v=NEYLT0R_meA Weight: Does the 300 lbs. maximum include all installed accessories? Is there an allowable tolerance for the fully configured brand-name table? The weight of the table can exceed 300lbs if needed because of other accessories. The table itself should not exceed 300 lbs. Delivery: Please confirm the required delivery timeframe and whether room placement, setup, functional testing, demonstration, and packaging removal are required at both locations. The delivery timeline will be discussed with the awarded vendor after award of contract. Offerors shall provide their best estimate of the delivery/lead time for the items within their quote package as this will be compared to other quotes. It is common for the tables to be pre-assembled so only delivery to the facility would be expected unless assembly is needed for a brand of table. Offerors should factor in the installation/assembly time and costs IF there are any. Freight pricing: Should delivery be priced under CLIN 0018 or incorporated into the equipment lines, given the instruction against a separate freight line? Offerors shall use their best judgement. It may be easiest to just include any delivery and installation/assembly costs under line item 0018 but that is not mandatory. Reseller authorization: Will an OEM letter authorizing __ to supply the specified equipment for this solicitation satisfy the authorization requirement? Yes. A letter or email from the OEM stating the offeror is authorized to provide their product to the Government is sufficient. Deadline time zone: Please confirm whether the October 23 question deadline and October 30 quote deadline are noon Denver local time (MDT) or noon MST. The deadlines are Mountain Time. We are currently in MDT but this shall change to MST on 11/1/2026. This acquisition is a Total Small Business Set-Aside under NAICS 339113. The referenced brand, Hill Laboratories, appears to be other than small. FAR 52.219-33 (Nonmanufacturer Rule) is listed in the clause matrix but is not marked applicable. Please confirm whether the Nonmanufacturer Rule applies, and if so, whether an SBA class waiver is in place that would permit a small business offeror to supply the Air Flex II or an equal product from a large manufacturer. Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. **The manufacturer for the Air Flex II, Hill Laboratories, has been confirmed to be a small business per SAM.gov Reps and Certs. The Description states "Freight shall be added to another line item and not be its own line item," but Line Item 0018 is titled "Delivery" with a quantity of 2 EA. Please clarify where freight should be priced. The Offeror may add the cost of freight to the delivery line item (#0018) or to the first line item if appropriate. The salient characteristics cap the weight of the table and equipment at 300 lbs. Please confirm whether this applies to the base table only or to the fully configured table with all listed options. This applies to base table only. Please confirm that Line Item 0018, quantity 2 EA, represents one delivery to each of the two locations. Correct, the quantity of 2 is due to one table EACH needing to be delivered to two separate locations. Therefore, delivery would be completed as two jobs. For the VAAR 852.212-71(c) manufacturer authorization, is a signed letter from the OEM on its letterhead (naming __ as an authorized distributor for this solicitation) sufficient, or is a specific format required? No specific format. Just some letter/email from the OEM stating the Offeror is authorized to sell their product to the Government. If an "equal" product is offered, should the authorization letter come from that product's manufacturer? Yes. An authorization letter is only needed from the OEM of the brand product the Offeror is offering. Is a delivery lead time after award stated in days (e.g., ARO) acceptable for Volume III, or is there a required delivery date? Yes. Offerors shall indicate the estimated number of days After Receipt of Order (ARO) of the contract in which the Offeror would be able to deliver the product to the locations once they receive the awarded contract. A specific date is not needed as the Government understands that it would be difficult to calculate since we do not know the specific date in which this requirement will be awarded.
-Combined Synopsis10/30/2026
This is a SOURCES SOUGHT NOTICE ONLY. This SOURCE SOUGHT NOTICE is for the purpose of Market Research. Response to this notice will be used for information and planning purposes. No proposals or quotes are being requested or accepted with this notice. THIS IS NOT A SOLICITATION FOR PROPOSALS or QUOTES and NO CONTRACT SHALL BE AWARDED FROM THIS NOTICE. This notice shall NOT be construed as solicitation or as an obligation on the part of the Department of Veterans Affairs (VA). Response to this notice is not a request to be added to a prospective bidders list or to receive a copy of the solicitation. The Central Arkansas Veterans Health Care System is seeking preferably Service-Disabled Veteran Owned Small Businesses (SDVOSB), or Small Businesses (but will accept other than small business for market research purposes), capable of providing Medtronic ManoScan Eso Z catheters for the Central Arkansas Veterans Health Care System. It is noted that Limitations on Subcontracting requirements will apply to a future solicitation and contract for this requirement. Contractors who are contemplating their interest and/or participation in this procurement should familiarize themselves with these requirements as adherence will be required. See DRAFT Performance Work Statement for detailed description of this requirement. The Government s intent is to identify vendors capable of providing the Medtronic ManoScan Eso Z catheters that meets or exceeds the salient functional characteristics described in the Draft Performance Work Statement. Vendors offering equivalent products must provide product literature demonstrating how their item meets the Government s minimum essential requirements. The NAICS code is NAICS 339112 Surgical and Medical Instrument Manufacturing, and the Size Standard is 1,000 Employees. Responses must be received by no later than 12:00 p.m. Eastern Time, November 13, 2026. Responses shall be emailed to jacqueline.ambala@va.gov. Facsimile or Telephonic responses will not be accepted. Responses shall contain Capabilities Statements to include the following: Contractors shall also provide the following: Contractor name: ___________________________________________ Point(s) of contact name: ______________________________________ Address: ___________________________________________________ Telephone number: ___________________________________________ Email address: _______________________________________________ Company's business size: _______________________________________ UEI #: ______________________________ CAGE Code: _______________________________ Proof that you are an authorized dealer and/or any qualifying certifications that may be required to perform the service. Is your company considered a small business concern, Small Business (SB), Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Historically Underutilized Business Zone (HUBZone), or 8A concern under the NAICS 339112? Does your company have the services available under any Government Wide Agency Contract (GWAC), General Service Administration (GSA), Federal Supply Schedule (FSS), Indefinite Delivery Indefinite Quantity (IDIQ), and/or Blanket Purchase Agreement (BPA) contract? If so, please identify the contract number for the government to review as part of this Market Research. Note: All interested parties are reminded to be registered, active and verified in the following to be considered for Award. SAM: SAM.gov | Home SBA Small Business Search: https://search.certifications.sba.gov/ Vet 4212 (Veteran owned small Business are reminded of Reporting Requirements) VETS-4212 Federal Contractor Reporting | U.S. Department of Labor (dol.gov)
-Market Research11/13/2026

Additional Details

Solicitation Number

80NSSC25913705Q

Archive Date

Sep 17, 2025