Water Softener System Purchase and Maintenance

This notice is seeking interested parties witht the capability to procure, install and provide services for the period of two years for a pool water softener system.  The water softener system must be equal to or better than the attached specification sheet.

SCOPE
1 Provide as indicated a vertical pressure type water softener system complete with pressure vessel, softening
resin, control valve, brine maker and electronic controller. The system will be of an approved design as
fabricated by a manufacturer regularly engaged in the production of water treatment equipment. All equipment
and material will be supplied in compliance with the specifications as intended for a complete and operational
system.
2 Qualified manufacturers of water softener equipment must be engaged in the manufacture of this type of
equipment for a period of not less than fifty (50) years. Acceptable manufacturers are Culligan International
Company or the Engineer’s approved equal.
3 Qualified manufacturers will have the entire softener certified as a system to NSF/ANSI 61, NSF/ANSI 372,
CSA 483.1, UL/CUL and CE.

FIELD SERVICE
The services of a factory authorized service representative will be made available to maintain, inspect and
provide regular interval service training as required for system operation. 

Questions:

1. Resin tank Size.  -  21” x 62”
2. Control valve piping size.  –  Max  2”
3. Minimum flow rate / Continuous flow rate.  -  65gpm @15-gpm
4. Maximum Flow rate. - Peak flow Rate is 85-gpm
5. Spacing size (footprint for installation of the water softener).  - 2.4ft-sqd per tank
6. Spacing size for Brine Tank. 36x56
7. Operating pressure. 35-125psi