GovChime
Notice ID: ebe35cfdbf6e44e18eaaf412453aabe6Combined Synopsis/SolicitationArchived

USCGC TAMPA Stbd Controllable Pitch Propeller (CPP) Blade Bolts, Renew In-Water

Archived on December 24, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM EST
Posted
December 17, 2025
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
336611: Ship Building and Repairing
Agency
Department of Homeland SecurityUS COAST GUARD

Notice details

Office
8TH COAST GUARD DISTRICT OFFICE
Place of performance
Portsmouth, Virginia, 23703
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
52000QR260001336
Notice ID
ebe35cfdbf6e44e18eaaf412453aabe6

Description

52000QR260001336

 NAICS Code 336611

Product Code J020

This is a combined synopsis/solicitation Nr 52000QR260001336 for a commercial items prepared in accordance with the format outlined in FAR Subpart 12.6, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 336611. The small business size standard is 1500. This is a total small business set aside; all responsible small business sources may submit proposals that will be considered. This synopsis/ solicitation is issued pursuant to FAR 13.106-1(b), and the resultant purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures in accordance with FAR 13.


THE UNITED STATES COAST GUARD SURFACE FORCE LOGISTICS CENTER REQUEST THE CONTRACTORS TO PROVIDE PRICING FOR THE FOLLOWING:

CGC USCGC TAMPA Stbd Controllable Pitch Propeller

(CPP) Blade Bolts, Renew In-Water.

Requirements

See  statement of work

DELIVERY DATE:

Requested work be conducted during a 1-week period to commence on

15DEC25 and end by close of business (COB) 19DEC25 at the following location.

 Shipping address:

USCGC TAMPA (WMEC 902), 4000 Coast Guard Blvd, Portsmouth, VA 23703

B. As stated below, the provision at FAR 52.212-2, Evaluation-Commercial Items- applies with the following addenda:

Award of a contract will be based on the following criteria: The purchase order will be awarded as a firm fixed price contract using simplified acquisition procedures in accordance with FAR Part 13.5.

1. Please provide any warranty information.
2. Vendors MUST be registered in www.sam.gov

The Government will award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conforming to the solicitation will be more advantageous to the Government, price and other factors considered.

Interested Offerors having the expertise as required are invited to submit a Firm Fixed Price proposal that will be considered by the agency. Proposals must be submitted on company letterhead stationery and must include the following information ( 1) Cost Breakdown, (2) Labor Cost, (3) Extended Price, (4) Total Price, (5) Payment Terms, (6) Discount offered for prompt payment, (7) Company DUNS and Cage Code.

Quotes must be received no later than 09DEC2025 at 12:00PM Eastern Standard Time. Email quotes are acceptable and should be sent to Joshua Miller at email address – Joshua.n.miller@uscg.mil.

Offerors shall include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications-Commercial items, with their offer or have provision FAR 52.212-3 submitted into www.sam.gov. Any questions or concerns regarding any aspect of this RFQ must be forwarded to Contracting Officer, Joshua Miller via email: JOSHUA.N.MILLER@USCG.MIL

PROVISIONS / CLAUSES:

The following FAR Clauses and Provisions apply to this acquisition and are incorporated by reference:

FAR 52.212-1 - Instructions to Offerors - Commercial Items (Oct 2018)

FAR 52.212-2 - Evaluation - Commercial Items (Oct 2014) Award will be made to the Offeror proposing the Best Value to the Government considering specification, price, past performance and quality.

FAR 52.212-3 - Offeror Representations and Certifications - Commercial Items (Oct 2018) to include Alt I (Oct 2014). Offeror is to complete the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.sam.gov .

FAR 52.212-4 - Contract Terms and Conditions -Commercial Items (Oct 2018) with the following addenda's.

FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (Jan 2019)

FAR 52.252-2 - Clauses Incorporated by Reference (Feb 1998), the full text of the clause may be accessed electronically at Internet address http://farsite.hill.af.mil/vffara.htm; A Data Universal Numbering System (DUNS) Number is the primary identifier in FAR 52.204-7 - System for Award Management (Oct 2018).

Contractors are located and identified in SAM by their DUNS number. To facilitate payment via Electronic Funds Transfer - SAM, contractors should be registered in SAM. A DUNS number can be obtained via www.dnb.com and SAM registration can be obtained via www.sam.gov.

The following Clauses and others as indicated by the Contracting Officer as applicable shall apply to this awarded contract.

FAR 52.222-3 - Convict Labor (Jun 2003)
FAR 52.222-19 - Child Labor Cooperation with Authorities and Remedies (Jan 2018)
FAR 52.222-35 - Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212)
FAR 52.222-36 - Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793)
FAR 52.222-37 - Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212)
FAR 52.222-50 - Combating Trafficking in Persons (Jan 2019)
FAR 52.223-18 - Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011)
FAR 52.225-1 - Buy American Supplies (May 2014)
FAR 52.225-13 - Restrictions on Certain Foreign Purchases (Jun 2008)
FAR 52.232-33 - Payment by Electronic Funds Transfer - Systems for Award Management (Oct 2018)
FAR 52.233-3 - Protest After Award (Aug 1996)
FAR 52.233-4 - Applicable Law for Breach of Contract Claim (Oct 2004)

52.222-11, Subcontracts (Labor Standards) (MAY 2014) (DEVIATION FEB 2025)

52.222-12, Contract Termination—Debarment (MAY 2014) (DEVIATION FEB 2025)

52.244-6, Subcontracts for Commercial Products and Commercial Services (JAN 2025) (DEVIATION FEB 2025)

The above/following clauses are incorporated by reference, entire clause(s) available at http://www.arnet.gov/far.

NOTICE TO OFFERORS CONCERNING REPRESENTATIONS AND CERTIFICATIONS:

This solicitation contains FAR Clause 52.204-7, Central Contractor Registration and FAR Provision 52.204-8, Annual Representations and Certifications. In accordance with FAR 4.1201 (a) Prospective contractors shall complete electronic annual representations and certifications SAM accessed via https://www.acquisition.gov. Please ensure completion prior to submission of your quote. Also note that paragraph (b) of FAR 52,204-8 applies.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (8)

  • 2699_245_A (1).pdf

    44 MBAdded in Combined Synopsis/Solicitation version 7Posted
    Download
  • SFLC-Std-Spec-0740-(2022).pdf

    838 KBAdded in Combined Synopsis/Solicitation version 5Posted
    Download
  • SFLC-Std-Spec-0000-(2022).pdf

    815 KBAdded in Combined Synopsis/Solicitation version 5Posted
    Download
  • SFLC-Std-Spec-5000-(2022).pdf

    667 KBAdded in Combined Synopsis/Solicitation version 5Posted
    Download
  • 901-WMEC_245_1_1_-_E.pdf

    540 KBAdded in Combined Synopsis/Solicitation version 5Posted
    Download
  • 901-WMEC_245_4_1_-_E.pdf

    465 KBAdded in Combined Synopsis/Solicitation version 5Posted
    Download
  • 901-WMEC_245_5_1_-_-.pdf

    302 KBAdded in Combined Synopsis/Solicitation version 5Posted
    Download
  • SOW_CGC TAMPA_PROP BLADE BOLTS_REV0.pdf

    389 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationArchived

    USCGC TAMPA Stbd Controllable Pitch Propeller (CPP) Blade Bolts, Renew In-Water

    Notice e78e2f4900e543839ac5a2774318eb77 on SAM.gov

  2. 2
    Version 2Combined Synopsis/SolicitationArchived

    USCGC TAMPA Stbd Controllable Pitch Propeller (CPP) Blade Bolts, Renew In-Water

    Notice 61adab0a16e84e50977784c52c11a0b1 on SAM.gov

  3. 3
    Version 3Combined Synopsis/SolicitationArchived

    USCGC TAMPA Stbd Controllable Pitch Propeller (CPP) Blade Bolts, Renew In-Water

    Notice d6915af878ff48a4ba62ac17272fc4f2 on SAM.gov

  4. 4
    Version 4Combined Synopsis/SolicitationArchived

    USCGC TAMPA Stbd Controllable Pitch Propeller (CPP) Blade Bolts, Renew In-Water

    Notice cf94e35159484c42aae7a8685b2c8d35 on SAM.gov

  5. 5
    Version 5Combined Synopsis/SolicitationArchived

    USCGC TAMPA Stbd Controllable Pitch Propeller (CPP) Blade Bolts, Renew In-Water

    Notice de491e3f14984d5dba34f510cb347ac8 on SAM.gov

  6. 7
    Version 7Combined Synopsis/SolicitationArchivedCurrent

    USCGC TAMPA Stbd Controllable Pitch Propeller (CPP) Blade Bolts, Renew In-Water

    Notice ebe35cfdbf6e44e18eaaf412453aabe6 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Solicitation Modifcation 001: The Government has received reports of widespread Microsoft Outlook service disruptions that may have impacted interested vendor's ability to a submit timely proposal. In consideration of the reported technical difficulties and to maximize the opportunity for fair competition to the extent practicable, the Government hereby extends the solicitation closing date to November 13, 2026 at 08:00 AM Eastern Standard Time. No further extensions will be granted due to the required commencement of the primary availability period of performance window starting November 16th, 2026. * REQUIRED PERIOD OF PERFORMANCE: Window of Availability is based upon primary and/or secondary dates. If only available for one (1) window of availability, please clearly state in your proposal. Primary: 16-27 November 2026 Secondary: 30 Nov – 11 December 2026 Interested vendors remain responsible for ensuring timely submission of their proposals by the revised closing date/time. Interested vendors are also responsible for monitoring the solicitation for amendments, updats and changes throughout the solicitation period. All other solicitation terms and conditions remain unchanged. End of Solicitation Modification 001. ---------------------------------------------------------------------------------------------------------- This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ) Number 52000QR270000477. This procurement will be processed in accordance with FAR Part 12. The North American Industry Classification System (NAICS) is 336611. The small business size standard is 1300. This is a total small business set aside; all responsible small business sources may submit quotations that will be considered. This synopsis/solicitation is issued pursuant to FAR 13.106-1(b), and the resultant purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures in accordance with FAR 13. This requirement is of an unusual and compelling urgency in accordance with FAR 13.106-1(b)(1). The inspection is necessary to ensure safety and mission readiness. Delay in award would result in unacceptable risk to government operations. THE UNITED STATED COAST GUARD SURFACE FORCE LOGISTICS CENTER AND THE CONTRACTING PROCUREMENT OFFICE CONDUCTED BY CG SEA-C21, REQUEST THE CONTRACTORS TO PROVIDE PRICING FOR THE FOLLOWING REQUIREMENT: Fuel Oil service tank cleaning aboard CGC Forward A. REQUIREMENT: 1. The contractor shall provide pumping and cleaning including gas-free certification of both diesel fuel marine tanks. See Attached SOW. Summary of Requirement: 3.1 General The Contractor shall provide all necessary labor, materials, supervision, and equipment to perform the tank cleaning as outlined below. 3.2 Pumping and Cleaning 3.2.1 Fuel Removal: Pump and properly dispose of all contents (approximately 5,700 gallons of contaminated fuel and water) from tanks 4-165-4-F and 4-165-3-F. 3.2.2 Tank Cleaning: Thoroughly clean all internal surfaces of tanks 4-165-4-F and 4-165-3-F to remove all sediment and contamination. 3.3 Gas-Free Certification 3.3.1 Marine Chemist: The contractor shall coordinate and provide for the services of a certified Marine Chemist to test and certify the tanks. 3.3.2 Certification Submittal: Provide two (2) signed copies of the Marine Chemist certification to the Coast Guard Inspector upon completion of the work. 2. LOCATION OF PERFORMANCE CGC FORWARD (WMEC 907) 4000 COAST GUARD BLVD PORTSMOUTH, VA 23703 3. REQUIRED PERIOD OF PERFORMANCE: Window of Availability is based upon primary and/or secondary dates. If only available for one (1) window of availability, please clearly state in your proposal. Primary: 16-27 November 2026 Secondary: 30 Nov – 11 December 2026 Interested Vendors shall provide product/service details, Product Data Sheet, and cost breakdown IAW SOW for technical review. Vendors shall provide a detailed cost breakdown to include all the specifications to be reviewed by a technical rep. NOTE: The USCG/Government reserves the right to Award on an All or None Basis, i.e., the Government may issue a Purchase Order (PO) to the offeror that submits the lowest aggregate price, rather than issue a PO to each offeror based on the lowest quotation on each item. As stated below, the provision at FAR 52.212-2- Evaluation-Commercial Products and Commercial Services-applies with the following addenda: Award of a contract will be based on the following criteria: The purchase order will be awarded as a firm-fixed price contract using simplified acquisition procedures in accordance with FAR Part 13. 1. Please provide any warranty information. 2. Vendors MUST have an active registration in www.sam.gov The USCG/Government intends to award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conforms to the solicitation and is most advantageous and the best value to the Government, price and other factors considered. The Government will utilize the simplified evaluation procedures outlined in FAR 13.106-2. Please Note: Interested Offerors having the expertise as required are invited to submit a Firm Fixed Price quotation that will be considered by the agency. Firm Fixed Price Proposals shall be detailed and include information from the SOW demonstrating an understanding of all the requirements in the SOW. Quotations must be submitted on company letterhead stationery and must include the following information: (1) Cost Breakdown (2) Unit Cost (3) Extended Price (4) Total Price (5) Payment Terms (6) Discount offered for prompt payment (7) Company Unique Entity ID (UEI) and Cage Code. Quotes must be received no later than 13 November 2026 at 08 A.M. Eastern Standard Time. Email quotes are acceptable and shall be sent to Ms. Nichole Cundiff at: Nichole.A.Cundiff@uscg.mil and carbon copy Contracting Officer, SKC Patricia Fremming at Patricia.M.Fremming@uscg.mil. Any questions or concerns regarding any aspect of the RFQ must be forwarded to Ms. Nichole Cundiff at email address – Nichole.A.Cundiff@uscg.mil and carbon copy Contracting Officer, SKC Patricia Fremming via email Patricia.M.Fremming@uscg.mil. The following FAR Clauses and Provisions apply to this acquisition: FAR 52.204-7 – System for Award Management (Nov 2024). To facilitate payment, contractors shall be registered in SAM.gov with an active Unique Entity Identifier (UEI) prior to submitting a quotation. A UEI and SAM registration can be obtained via https://www.sam.gov. FAR 52.212-1 - Instructions to Offerors – Commercial Products and Commercial Services (Sep 2023) FAR 52.212-2 - Evaluation - Commercial Products and Commercial Services (Nov 2021) Award will be made to the Offeror proposing the Best Value to the Government considering specification, price, past performance and quality. FAR 52.212-3 - Offeror Representations and Certifications - Commercial Products and Commercial Services (Oct 2025) to include Alt I (Feb 2024). Offeror shall complete annual representations and certification electronically via the System for Award Management (SAM) website accessed through https://www.sam.gov. FAR 52.212-4 - Contract Terms and Conditions - Commercial Products and Commercial Services (Nov 2023) FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services (Mar 2026) FAR 52.252-2 - Clauses Incorporated by Reference (Feb 1998) The following clauses, and others as directed by the Contracting Officer as applicable, shall apply to this awarded contract: FAR 52.219-6 - Notice of Total Small Business Set-Aside (Nov 2020) FAR 52.219-28 - Post-Award Small Business Program Rerepresentation (Feb 2024) FAR 52.222-3 - Convict Labor (Jun 2003) FAR 52.222-19 - Child Labor Cooperation with Authorities and Remedies (Mar 2026) (E.O.13126). FAR 52.222-35 - Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-36 - Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793). FAR 52.222-37 - Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-50 - Combating Trafficking in Persons (Oct 2025) (22 U.S.C. chapter 78 and E.O. 13627). FAR 52.225-1 - Buy American Supplies (Oct 2022) (41 U.S.C. chapter 83). (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). FAR 52.232-33 - Payment by Electronic Funds Transfer - Systems for Award Management (Oct 2018) FAR 52.233-3 - Protest After Award (Aug 1996) FAR 52.233-4 - Applicable Law for Breach of Contract Claim (Oct 2004) NOTE: In addition to the listed clauses, please review the attached FAR Clause Matrix for all clauses applicable to this requirement. *The above clauses are incorporated by reference, entire clause(s) available at https://acquisition.gov. NOTICE TO OFFERORS CONCERNING REPRESENTATIONS AND CERTIFICATIONS: This solicitation contains FAR Clause 52.204-7, System for Award Management and FAR Provision 52.204-8, Annual Representations and Certifications. In accordance with FAR 4.1201 (a), prospective contractors shall complete electronic annual representations and certifications via SAM accessed through https://www.sam.gov. Please ensure completion prior to submitting a quotation. Paragraph (b) of FAR 52.204-8 applies. System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222-25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Additional examples include 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services, and 52.213-4, Terms and Conditions—Simplified Acquisitions (Other Than Commercial Products and Commercial Services).
73%
Combined Synopsis11/13/2026
USCGC DOLPHIN FUEL TANK CLEANING This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ) Number 52000QR270000488 . This procurement will be processed in accordance with FAR Part 12. The North American Industry Classification System (NAICS) is 336611. The small business size standard is 1300. This is a total small business set aside; all responsible small business sources may submit quotations that will be considered. This synopsis/solicitation is issued pursuant to FAR 13.106-1(b), and the resultant purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures in accordance with FAR 13. THE UNITED STATED COAST GUARD SURFACE FORCE LOGISTICS CENTER REQUEST THE CONTRACTORS TO PROVIDE PRICING FOR THE FOLLOWING REQUIREMENT: The U.S. Coast Guard Cutter Dolphin (WPB-87354) requires commercial providers to perform cleaning of both Fuel Service Tanks. TANK TYPE LOCATION CAPACITY Deisel Fuel 3-9-1-F 1450 Diesel Fuel 3-9-2-F 1450 A. REQUIREMENT: USCGC DOLPHIN FUEL TANK CLEANING AND INSPECTION CONTENTS: 1. Introduction 2. References 3. Scope of Work 4. Period of Performance 5. Deliverables 6. Acceptance Criteria 7. Notes 1.0 INTRODUCTION The U.S. Coast Guard Cutter Dolphin (WPB-87354) requires commercial providers to perform cleaning of both Fuel Service Tanks. TANK TYPE LOCATION CAPACITY Deisel Fuel 3-9-1-F 1450 Diesel Fuel 3-9-2-F 1450 2.0 REFERENCES COAST GUARD DRAWINGS Coast Guard Drawing 87 WPB 111-001, Rev H, Shell Expansion Coast Guard Drawing 87 WPB 113-001, Rev G, Platform Plating & Framing Coast Guard Drawing 87 WPB 116-001, Rev -, Longitudinal Girders & BHD’s Coast Guard Drawing 87 WPB 122-001, Rev C, Watertight Bulkheads Coast Guard Drawing 87 WPB 601-001, Rev R, Outboard Profile & General Arrangements COAST GUARD PUBLICATIONS Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements. Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes. OTHER REFERENCES Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2019, Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets. Maintenance Procedure Card (MPC) B24101.D 3.0 SCOPE OF WORK 3.1 The work is to be accomplished through the following: 3.1.1 Travel to work site / ship location: 1500 15th St. Mobile, AL 36615 3.2 Operational Test, Initial: Prior to commencement of work, the Contractor must witness Coast Guard Personnel perform an initial operational test of the designated tank level indicator(s) (TLI’s). 3.3 Tank Content and Waste Disposal: The Contractor must remove a total of 1400 gallons of contaminated diesel fuel. The Contractor must dispose of residual tank contents and any cleaning fluids in compliance with all applicable Federal, state, and local laws, ordinances, and regulations. Document a complete chain of custody record of the removed tank contents and generated wastes, from the vessel to the point of final destination or delivery. Provide any documents to the Coast Guard Inspector (EPO) upon completion. 3.4 Tank Cleaning Requirements: The Contractor must remove tank access cover(s) and clean tank interior surfaces free of all foreign materials, such as residual fuel or water, sediment, sludge, rust, or biological growth, taking care not to damage the coating system (if applicable). Remove cleaning media and residues continuously during the washing process and dispose of wash water. Remove any residual wash media; and wipe up residual moisture with clean lint-free cloths. Ensure that the tank(s) remain open for at least 24 hours to ventilate and dry prior to inspection. 3.5 The Contractor shall conduct atmospheric testing by a competent person of the ship’s fuel service tanks, vestibule area, and any other spaces as deemed necessary by the Contractor. 3.6 The Contractor must furnish and install all protective measures and gear required for ventilation. 3.7 The Contractor must handle all interferences not limited to: 3.7.1 Fuel 3.7.2 Piping 3.7.3 Tank access cover 3.8 Plug Log: The Contractor must keep a written record of all plugs put in any tank’s vents or piping. A separate list must be kept for each tank being entered. 3.8.1 Ensure that all plugs are removed from each tank upon completion of work in the tank. 3.8.2 Ensure the Plug Log is available to the Coast Guard Inspector when performing their close-out inspection on each tank. 3.9 Visual Inspection: The Contractor in the presence of a Coast Guard Inspector (EPO) must accomplish the following tasks: 3.9.1 Visually inspect all tank interior surfaces, including, but not limited to bulkheads, floor and overhead plating, structural members, access cover surfaces, fasteners, and gasket seating surfaces. 3.9.2 Tank structural condition. 3.9.3 Inaccessible areas. 3.9.4 Condition of tank coating system, including measurements taken, percentage, location, and type of coating failure (if tank interior surfaces are coated). 3.9.5 Tank level indicator (TLI) and/or float switch condition, as applicable. 3.9.6 Sounding/vent tube and striker plate condition. 3.9.7 Suction and discharge piping condition. 3.9.8 Fastener material and condition (correct fastener material is stainless steel) and (government furnished equipment (GFE) by the Coast Guard). 3.9.9 EPO shall notify the Contract Officers Representative (COR) at PBPL Asset Management of satisfactory/unsatisfactory inspection results prior to closing the tank(s). 3.10 Tank Closing: The Contractor must accomplish the following after completion of all authorized services, repairs, and/or preservation procedures: 3.10.1 Ensure tank closure is accomplished in the presence of the Coast Guard Inspector (EPO). After a satisfactory inspection by the Coast Guard Inspector and completion of all authorized services/repairs, install tank access cover(s) using new gasket material conforming to AMS-C-6183. 3.10.2 Chase threads on studs/bolts to ensure even installation of the access covers. Renew any damaged or missing fasteners. All Nylock hex nuts must be renewed. Existing undamaged fasteners may be reused. 3.10.3 Torque access cover hardware hex bolt/nuts in star pattern using standard torque specifications for thread size and material make (Stainless Steel). 3.11 Operational test, post service/repairs: After completion of work, in the presence of the Coast Guard Inspector, the Contractor must thoroughly test and demonstrate the equipment listed below to be in satisfactory operating condition. 3.11.1 Designated tank TLIs. 3.11.2 Vent check valves. 4.0 PERIOD OF PERFORMANCE 4.1 The Contractor shall coordinate the work schedule with Coast Guard Cutter Dolphin. Once the Contractor is in receipt of final authorization and prepared to conduct services, the period of performance shall not exceed 05 days after contract award date. The requested work period is between; 15 November 2026 to 15 December 2026, or as soon as service provider availability will allow, with the requested date of completion no later than 15 December 2026. 5.0 DELIVERABLES 5.1 The Contractor shall provide all required equipment and labor costs. 5.2 The Coast Guard shall schedule a service date and be available to receive contracted service. 6.0 ACCEPTANCE CRITERIA 6.1 The government reserves the right to witness the contract service. The service provider shall keep the Coast Guard Inspector, the Engineer Petty Officer (EPO), MKC Colin Jones, fully informed of servicing plans so that the authorized representative, CG Inspector, may arrange to be present when work is being performed. 6.2 When the work is complete, the Contractor shall notify the unit’s EPO for final inspections. 7.0 QUALITY ASSURANCE 7.1 The Contractor shall develop and maintain an effective Quality Control Program (QCP) to ensure that services are performed in accordance with the terms of this Statement of Work (SOW), and in accordance with manufacturer’s guidance and procedures. The QCP is the means which the vendor assures all work complies with the terms of the awarded contract. It identifies, prevents, and ensures non-occurrence of defective services. 8.0 CONTRACTING OFFICERS REPRESENTATIVE 8.1 The Contract Officer’s Representative (COR) at the U.S. Coast Guard Surface Forces Logistics Center shall be reached at the PBPL Asset Management Section One through the EPO. 9.0 NOTES 9.1 Government Furnished Equipment (GFE) provided by the Coast Guard: 9.1.1 Access Cover, (New) Gasket(s). 9.1.2 Access Cover, (New) Hardware (Stainless Steel - Nuts/Bolts/Washers/Lock-Washers) As Required. 9.2 Tank Content Restoration: The Coast Guard shall procure and refill all tanks at the conclusion of all work. 9.3 Operate and Test: The CG will operate and test installed mechanical equipment that draws fuel from the newly cleaned fuel tanks IAW operating procedures, ensuring air has been purged from fuel suction lines to maintain constant operation. 9.4 All Government Furnished Information and work products shall remain the property of the U.S. Coast Guard and shall not be released to any third party or published without prior approval. Interested Vendors shall provide product/service details, Product Data Sheet, and cost breakdown IAW SOW for technical review. Vendors shall provide a detailed cost breakdown to include all the specifications to be reviewed by a technical rep. NOTE: The USCG/Government reserves the right to Award on an All or None Basis, i.e., the Government may issue a Purchase Order (PO) to the offeror that submits the lowest aggregate price, rather than issue a PO to each offeror based on the lowest quotation on each item. As stated below, the provision at FAR 52.212-2- Evaluation-Commercial Products and Commercial Services-applies with the following addenda: Award of a contract will be based on the following criteria: The purchase order will be awarded as a firm-fixed price contract using simplified acquisition procedures in accordance with FAR Part 13. 1. Please provide any warranty information. 2. Vendors MUST have an active registration in www.sam.gov The USCG/Government intends to award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conforms to the solicitation and is most advantageous and the best value to the Government, price and other factors considered. The Government will utilize the simplified evaluation procedures outlined in FAR 13.106-2. Please Note: Interested Offerors having the expertise as required are invited to submit a Firm Fixed Price quotation that will be considered by the agency. Quotations must be submitted on company letterhead stationery and must include the following information: (1) Cost Breakdown (2) Unit Cost (3) Extended Price (4) Total Price (5) Payment Terms (6) Discount offered for prompt payment (7) Company Unique Entity ID (UEI) and Cage Code. Quotes must be received no later than November 09, 2026 at 0900 A.M. Eastern Standard Time. Email quotes are acceptable and shall be sent to Tim Ford at: Timothy.S.Ford@uscg.mil and carbon copy Contracting Officer, CWO Sean Hoy at Sean.W.Hoy@uscg.mil. Any questions or concerns regarding any aspect of the RFQ must be forwarded to Tim Ford at email address – Timothy.S.Ford@uscg.mil and carbon copy Contracting Officer, CWO Sean Hoy via email Sean.W.Hoy@uscg.mil. The following FAR Clauses and Provisions apply to this acquisition: FAR 52.204-7 – System for Award Management (Nov 2024). To facilitate payment, contractors shall be registered in SAM.gov with an active Unique Entity Identifier (UEI) prior to submitting a quotation. A UEI and SAM registration can be obtained via https://www.sam.gov. FAR 52.212-1 - Instructions to Offerors – Commercial Products and Commercial Services (Sep 2023) FAR 52.212-2 - Evaluation - Commercial Products and Commercial Services (Nov 2021) Award will be made to the Offeror proposing the Best Value to the Government considering specification, price, past performance and quality. FAR 52.212-3 - Offeror Representations and Certifications - Commercial Products and Commercial Services (Oct 2025) to include Alt I (Feb 2024). Offeror shall complete annual representations and certification electronically via the System for Award Management (SAM) website accessed through https://www.sam.gov. FAR 52.212-4 - Contract Terms and Conditions - Commercial Products and Commercial Services (Nov 2023) FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services (Mar 2026) FAR 52.252-2 - Clauses Incorporated by Reference (Feb 1998) The following clauses, and others as directed by the Contracting Officer as applicable, shall apply to this awarded contract: FAR 52.219-6 - Notice of Total Small Business Set-Aside (Nov 2020) [Remove if unrestricted] FAR 52.219-28 - Post-Award Small Business Program Rerepresentation (Feb 2024)[Remove if unrestricted] FAR 52.222-3 - Convict Labor (Jun 2003) FAR 52.222-19 - Child Labor Cooperation with Authorities and Remedies (Mar 2026) (E.O.13126). FAR 52.222-35 - Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-36 - Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793). FAR 52.222-37 - Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-50 - Combating Trafficking in Persons (Oct 2025) (22 U.S.C. chapter 78 and E.O. 13627). FAR 52.225-1 - Buy American Supplies (Oct 2022) (41 U.S.C. chapter 83). (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). FAR 52.232-33 - Payment by Electronic Funds Transfer - Systems for Award Management (Oct 2018) FAR 52.233-3 - Protest After Award (Aug 1996) FAR 52.233-4 - Applicable Law for Breach of Contract Claim (Oct 2004) NOTE: In addition to the listed clauses, please review the attached FAR Clause Matrix for all clauses applicable to this requirement. *The above clauses are incorporated by reference, entire clause(s) available at https://acquisition.gov. NOTICE TO OFFERORS CONCERNING REPRESENTATIONS AND CERTIFICATIONS: This solicitation contains FAR Clause 52.204-7, System for Award Management and FAR Provision 52.204-8, Annual Representations and Certifications. In accordance with FAR 4.1201 (a), prospective contractors shall complete electronic annual representations and certifications via SAM accessed through https://www.sam.gov. Please ensure completion prior to submitting a quotation. Paragraph (b) of FAR 52.204-8 applies. System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222-25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Additional examples include 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services, and 52.213-4, Terms and Conditions—Simplified Acquisitions (Other Than Commercial Products and Commercial Services).
71%
Combined Synopsis11/09/2026
COMBINED SYNOPSIS / SOLICITATION FOR COMMERCIAL SERVICES Solicitation Number: 52050PR260000524 Project Title: USCGC Hudson Capstan and Single Point Davit Inspection & Repair Issuing Agency: United States Coast Guard (USCG) – Base Miami Beach (P&C) Notice Type: Combined Synopsis / Solicitation Set-Aside Status: 100% Total Small Business Set-Aside Applicable NAICS Code: 336611 – Ship Building and Repairing Small Business Size Standard: 1,000 Employees Contract Type: Firm-Fixed-Price (FFP) Acquisition Authority: FAR Subpart 12.6, FAR Part 13 (Simplified Acquisition Procedures), and FAR Part 15 1. General Notice & Acquisition Overview This document constitutes a combined synopsis/solicitation for commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; no separate written solicitation will be issued. The solicitation is advertised as a Small Business Set-Aside only. Award will be made using simplified acquisition procedures to the responsible offeror whose proposal conforms to the solicitation requirements and represents the Lowest Price Technically Acceptable (LPTA) to the Government. 2. Key Procurement Schedule & Contacts Organized Site Visit October 06, 2026 @ 9:00 AM EST (Coordinate access and attendance via the COR) Location: USCGC Hudson, Miami Beach, FL. Email: Bryan.W.Goltz@uscg.mil Questions Deadline October 13, 2026 @ 1:00 PM EST Submit via email using the mandatory subject format below. Proposal Submission Deadline October 20, 2026 @ 1:00 PM EST Electronic submission to Ulric.Waldron@uscg.mil. Period of Performance Within 45 calendar days post-award Work to commence no later than 45 days after award date. Authorized Work Hours Mon – Fri, 0730 – 1500 (7:30 AM – 3:00 PM) No weekends or federal holidays authorized. Points of Contact Contracting & Proposal Inquiries: Ulric Waldron, Contracting Officer / Specialist Email: Ulric.Waldron@uscg.mil Mailing / Delivery Address: Commanding Officer USCG Base Miami Beach (P&C) Attn: Ulric Waldron 16001 SW 117th Avenue Miami, FL 33177 Technical & Scheduling Inquiries / Site Visit: Mr. Brian Goltz Phone: 305-535-4337 Email: Bryan.W.Goltz@uscg.mil 3. Place of Performance Vessel: USCGC Hudson Berthing Address: 100 MacArthur Causeway Miami Beach, FL 33139 4. Proposal Submission Instructions 4.1 Submission Methods & Protocols Electronic Submission (Preferred): Deliver via email to Ulric.Waldron@uscg.mil. Telephone requests for quotes will not be accepted. Mail / Hand Delivery: Must arrive at USCG Base Miami Beach (P&C), Attn: Ulric Waldron, 16001 SW 117th Avenue, Miami, FL 33177 prior to 1:00 PM EST on October 20, 2026. Formal amendments and notices of changes will be issued via SAM.gov. 4.2 Mandatory Email Subject Formatting Inquiries and proposals without the exact subject line formats may experience severe processing and response delays: Proposal Submission Subject Format: [PROPOSAL SUBMISSION] [52050PR260000524] - [USCGC Hudson Inspection & Repair] ([Company Name]) Question / Clarification Subject Format: [QUESTION SUBMISSION] [52050PR260000524] - [USCGC Hudson Inspection & Repair] ([Company Name]) (Note: Replace [Company Name] with your organization's legal name inside the parentheses). 4.3 Vendor Administrative Requirements Offerors must provide their Taxpayer Identification Number (TIN/EIN) and Unique Entity Identifier (UEI) / DUNS number. Vendors must maintain an ACTIVE registration in SAM.gov prior to the closing of this solicitation and prior to contract award. Offerors must have NAICS code 336611 registered on their SAM.gov profile to be considered eligible for award. 5. Evaluation and Basis for Award Award will be made using simplified acquisition procedures to the responsible offeror whose offer conforming to the solicitation will represent the Lowest Price Technically Acceptable (LPTA) to the Government. Evaluations will be conducted in accordance with FAR Part 13 and FAR Part 15 based on: Technical Acceptability: Demonstrated ability to fulfill all technical requirements and compliance with contract specifications. Past Performance: Verification of relevant, satisfactory performance on similar marine maintenance/repair projects. Price: Evaluated total proposed fixed price for reasonableness and completeness. 6. Applicable Clauses, Provisions, and Wage Determinations 6.1 Federal Acquisition Regulation (FAR) Clauses (Incorporated by Reference) 52.212-1 Instructions to Offerors — Commercial Items (Deviation 2018-O0018) 52.212-3 Offeror Representations and Certifications — Commercial Items 52.212-4 Contract Terms and Conditions — Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders — Commercial Items 52.222-41 Service Contract Labor Standards 52.222-90 In accordance with Executive Order (E.O.) 14398 Full text of FAR clauses is accessible electronically at acquisition.gov/far. 6.2 Homeland Security Acquisition Regulations (HSAR) Clauses HSAR 3052.209-70 Prohibition on Contracts with Corporate Expatriates HSAR 3052.237-72 Contracting Officer's Technical Representative (COTR) Full text of HSAR clauses is accessible electronically at dhs.gov. 6.3 Applicable Wage Determination Department of Labor Wage Determination: No. 2015-4543 (applicable revision).
71%
Combined Synopsis10/20/2026
The reason for this amendment is to provide to extend the solicitation closing date until Monday 16th November, 2026. _______________________________________________ * * ___________________________________________________ The reason for this amendment is to provide responses to the questions submitted by interested offerors, and to add the Wage Determination for Honolulu to the solicitation. ___________________________________________________ * * ___________________________________________________ The Contractor shall furnish all necessary labor, materials, services, equipment, supplies, power, accessories, facilities, and all other items required—except as otherwise specified—to perform dockside repairs in accordance with this solicitation and all attached specifications. The scope of work includes ship repair and associated support work and may include work not currently listed as individual Work Items. Work Items 01 and 03 will require the presence onsite of an AUTHORIZED/LICENSED OEM service provider for Caterpillar Marine Diesel engine/Generators (see attached Justification and approval).
67%
Combined Synopsis11/16/2026
This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ) Number 52000QR270000684. This procurement will be processed in accordance with FAR Part 12. The North American Industry Classification System (NAICS) is 336611. The small business size standard is 1300. This is a total small business set aside; all responsible small business sources may submit quotations that will be considered. This synopsis/solicitation is issued pursuant to FAR 13.106-1(b), and the resultant purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures in accordance with FAR 13. THE UNITED STATED COAST GUARD SURFACE FORCE LOGISTICS CENTER AND THE CONTRACTING PROCUREMENT OFFICE CONDUCTED BY CG SEA-C21, REQUEST THE CONTRACTORS TO PROVIDE PRICING FOR THE FOLLOWING REQUIREMENT: Intent: While the vessel is moored pier side, clean the vessel’s U/W body and (pending inspection) renew bolt-on zinc anodes (if needed). Statement of Work (SOW) Requirement Summary: SEE ATTACHED SOW FOR DETAILS. CGC FREDERICK HATCH requires Clean/Inspect/Video Underwater (U/W) Body Surfaces (renew failed zinc anodes). 3.1 DEFINITE WORK. The Contractor must: 3.1.1 SUBMIT A PRE AND POST CLEANING VIDEO. 3.1.2 CLEAN AND INSPECT UNDERWATER BODY SURFACES. 3.1.3 SUBMIT FINAL REPORT. 3.2 OPTIONAL/CONDITIONAL WORK. 3.2.1 RENEW ANODES. 2. REFERENCES *Access to some drawings may be Export-Controlled and require any recipient to be registered in the Joint Certification Program (JCP) through DLA to receive the drawing. * COAST GUARD DRAWINGS None COAST GUARD PUBLICATIONS 154-WPC MPC B10015.D rev 10/31/24 154-WPC MPC B10018.D rev 04/30/25 3. PERIOD OF PERFORMANCE (POP) The POP for the requirement shall be between 12/01/26 - 12/11/26. Specific performance dates shall be coordinated with the Government POC to accommodate operational requirements. The contractor shall be available to perform the service during the specified POP window. 4. PLACE OF PERFORMANCE The primary place of performance shall be at CGC FREDERICK HATCH located at below address: CGC FREDERICK HATCH NAVAL BASE GUAM SANTA RITA Guam 96915 USA POC: MKC Paul Kurkowski Cell: (954) 999-7208 Email: Paul.J.Kurkowski@uscg.mil 5. SECURITY REQUIREMENTS All contractor personnel requiring access to the place of performance in order to perform work under this contract must possess a valid-state issued REAL ID-compliant driver’s license or identification card, or an acceptable alternative form of identification as defined by the Department of Homeland Security (DHS) [https://www.dhs.gov/real-id]. It is the contractor’s responsibility to ensure that all personnel are properly credentialed to gain base access. Failure to comply with access requirements may result in delays to performance and will not constitute an excusable delay. -------------------------------------------------------------------------------- Interested Vendors shall provide product/service details, Product Data Sheet, Technical Approach with proposed performance schedules, and cost breakdown of CLIN 0001 and optional CLIN 0002 IAW SOW for technical review. Vendors shall provide a detailed cost breakdown to include all the specifications to be reviewed by a technical rep. NOTE: The USCG/Government reserves the right to Award on an All or None Basis, i.e., the Government may issue a Purchase Order (PO) to the offeror that submits the lowest aggregate price, rather than issue a PO to each offeror based on the lowest quotation on each item. As stated below, the provision at FAR 52.212-2- Evaluation-Commercial Products and Commercial Services-applies with the following addenda: Award of a contract will be based on the following criteria: The purchase order will be awarded as a firm-fixed price contract using simplified acquisition procedures in accordance with FAR Part 13. 1. Please provide any warranty information. 2. Vendors MUST have an active registration in www.sam.gov BASIS FOR AWARD: BEST VALUE- TRADEOFF The USCG/Government intends to award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conforms to the solicitation and is most advantageous and the best value to the Government, price and other factors considered. The Government will utilize the simplified evaluation procedures outlined in FAR 13.106-2. The Government may select a higher-priced proposal when the demonstrated technical advantages or reduced performance risks justify the additional cost. As proposals become more technically comparable, price may become a greater determining factor. Evaluation Factors: Technical Capability Evaluation will consider the offeror’s demonstrated understanding of the SOW, proposed inspection and performance methodology, ability to renew Government-furnished components, and approach to minor modifications necessary to ensure proper fit of optional/conditional work. Performance Risk and Schedule Evaluation will consider the feasibility and credibility of proposed performance schedules, repair lead times, resource availability, and the offeror’s ability to complete required/optional services within the established period of performance. Past Performance Evaluation will consider the recency, relevance and quality of the offeror’s past performance on contracts of similar scope, and complexity. Consideration may include quality of workmanship, schedule adherence, contract compliance, and successful completion of comparable services. Price The Government will evaluate CLIN 0001 firm-fixed pricing and CLIN 0002 estimated pricing schedules for price reasonableness and overall evaluated cost for best value. CLIN 0002 estimates are for evaluation purposes only and Do Not Guarantee that conditional work will be authorized. Please Note: Interested Offerors having the expertise as required are invited to submit a Firm Fixed Price quotation that will be considered by the agency. Firm Fixed Price Proposals shall be detailed and include information from the SOW demonstrating an understanding of all the requirements in the SOW. ACCESS TO RESTRICTED TECHNICAL DATA- DISTRIBUTION STATEMENT D *Technical Data Access: Distribution Statement D — Critical JCP Certification Required. Drawings are not publicly posted on SAM.gov. Some of the technical data associated with this solicitation is marked Distribution Statement D and is restricted to the Department of War/Department of Defense (DoW/DoD) and U.S. DoW/DoD contractors. Interested vendors requiring access to the restricted technical data must possess an active certification under the United States/Canada Joint Certification Program (JCP). Information on the JCP, including application instructions, is available on the JCP website (https://www.dla.mil/logistics-operations/services/joint-certification-program/). Upon verification of the vendor’s active JCP certification, the Government will provide the restricted technical data outside of SAM.gov. Interested vendors are responsible for obtaining and maintaining the required JCP certification and requesting access to the restricted technical data sufficiently in advance of the solicitation closing date posted in this notice. Failure to obtain access to the restricted technical data will not constitute a basis for extension of the solicitation closing date. The Government is not responsible for delays associated with obtaining JCP certification or requesting access to the restricted technical data. Quotations must be submitted on company letterhead stationery and must include the following information: (1) Cost Breakdown (CLIN 0001 consists of Definite work items with sub-clins; CLIN 0002 consists of Option/Conditional Work Item(s).) (2) Unit Cost (3) Extended Price (4) Total Price (5) Payment Terms (6) Discount offered for prompt payment (7) Company Unique Entity ID (UEI) and Cage Code. CLIN 0002- OPTIONAL/CONDITIONAL REPAIR WORK: Offerors shall submit a separate estimated pricing schedule for CLIN 0002 identifying applicable rates/percentages/prices associated with the optional/conditional work item(s) that are Government-furnished property in accordance with paragraph 1.2 in the SOW, including minor modifications necessary to ensure proper fit. CLIN 0002 may be exercised at the time of contract award; however, no conditional repair work is authorized by its inclusion. Performance of CLIN 0002 shall be contingent upon completion of the contractor's inspection and submission of a Condition Found Report (CFR) in accordance with SOW paragraphs 3.1.2 and 3.1.3. Upon identification of necessary anodes to be replaced/renewed, a Contract Change Order Request (CR-001) would be submitted identifying proposed scope of repairs, quantities, and associated costs calculated using the established CLIN 0002 pricing schedule. The Contracting Officer shall review the CFR and CR to determine the necessity, scope, and price reasonableness of the proposed work. The Government reserves the right to authorize all, part, or none of the conditional repairs. No optional/conditional work shall commence without prior written Contracting Officer authorization through an appropriate contract modification. Any deviation from the established CLIN 0002 pricing shall require separate justification and approval. Quotes must be received no later than 20 November 2026 at 10:00 A.M. Eastern Standard Time. Email quotes are acceptable and shall be sent to Tim Ford at: Timothy.S.Ford@uscg.mil and carbon copy Contracting Officer, SKC Patricia Fremming at Patrica.M.Fremming@uscg.mil . Any questions or concerns regarding any aspect of the RFQ must be forwarded to Tim Ford at email address – Timothy.S.Ford@uscg.mil carbon copy Contracting Officer, SKC Patricia Fremming via email Patrcia.M.Fremming@uscg.mil. The following FAR Clauses and Provisions apply to this acquisition: FAR 52.204-7 – System for Award Management (Nov 2024). To facilitate payment, contractors shall be registered in SAM.gov with an active Unique Entity Identifier (UEI) prior to submitting a quotation. A UEI and SAM registration can be obtained via https://www.sam.gov. FAR 52.212-1 - Instructions to Offerors – Commercial Products and Commercial Services (Sep 2023) FAR 52.212-2 - Evaluation - Commercial Products and Commercial Services (Nov 2021) Award will be made to the Offeror proposing the Best Value to the Government considering specification, price, past performance and quality. FAR 52.212-3 - Offeror Representations and Certifications - Commercial Products and Commercial Services (Oct 2025) to include Alt I (Feb 2024). Offeror shall complete annual representations and certification electronically via the System for Award Management (SAM) website accessed through https://www.sam.gov. FAR 52.212-4 - Contract Terms and Conditions - Commercial Products and Commercial Services (Nov 2023) FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services (Mar 2026) FAR 52.252-2 - Clauses Incorporated by Reference (Feb 1998) The following clauses, and others as directed by the Contracting Officer as applicable, shall apply to this awarded contract: FAR 52.217-5 - Evaluation of Options FAR 52.217-4 - Evaluation of Options Exercised at Time of Contract Award FAR 52.219-6 - Notice of Total Small Business Set-Aside (Nov 2020) FAR 52.219-28 - Post-Award Small Business Program Rerepresentation (Feb 2024) FAR 52.222-3 - Convict Labor (Jun 2003) FAR 52.222-19 - Child Labor Cooperation with Authorities and Remedies (Mar 2026) (E.O.13126). FAR 52.222-35 - Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-36 - Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793). FAR 52.222-37 - Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-50 - Combating Trafficking in Persons (Oct 2025) (22 U.S.C. chapter 78 and E.O. 13627). FAR 52.225-1 - Buy American Supplies (Oct 2022) (41 U.S.C. chapter 83). (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). FAR 52.232-33 - Payment by Electronic Funds Transfer - Systems for Award Management (Oct 2018) FAR 52.233-3 - Protest After Award (Aug 1996) FAR 52.233-4 - Applicable Law for Breach of Contract Claim (Oct 2004) *The above clauses are incorporated by reference, entire clause(s) available at https://acquisition.gov. NOTICE TO OFFERORS CONCERNING REPRESENTATIONS AND CERTIFICATIONS: This solicitation contains FAR Clause 52.204-7, System for Award Management and FAR Provision 52.204-8, Annual Representations and Certifications. In accordance with FAR 4.1201 (a), prospective contractors shall complete electronic annual representations and certifications via SAM accessed through https://www.sam.gov. Please ensure completion prior to submitting a quotation. Paragraph (b) of FAR 52.204-8 applies. System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222-25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Additional examples include 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services, and 52.213-4, Terms and Conditions—Simplified Acquisitions (Other Than Commercial Products and Commercial Services).
67%
Combined Synopsis11/20/2026

Additional Details

Solicitation Number

52000QR260001336

Archive Date

Dec 24, 2025

Office Address

NEW ORLEANS, LA, 70130