The Drive Plate Bushing Gage - H-1 United States Marine Corps (USMC) Helicopter Program
Responses closed . Solicitation posted by DEPT OF DEFENSE (DEPT OF THE NAVY) on September 22, 2026. Solicitation N68335-26-Q-1139.
NAICS 333514 (Special Die and Tool, Die Set, Jig, and Fixture Manufacturing). Set-aside: Small Business Set Aside - Total. Place of performance: Lakehurst, New Jersey. Original response deadline: . Full description on SAM.gov.
Description
***AMENDMENT 003 WAS ISSUED TO REVISE THE DELIVERY - SHIP TO ADDRESS, AS REFLECTED ON THE ATTACHMENT TITLED, "REV BUY TERMS (0005) 09-22.***
***AMENDMENT 002 WAS ISSUED TO EXTEND THE PROPOSAL SUBMISSION DUE DATE TO 30 SEPTEMBER 2026 AT 11:00 AM EST.***
***AMENDMENT 001 WAS ISSUED TO EXTEND THE PROPOSAL SUBMISSION DUE DATE TO 14 SEPTEMBER 2026 AT 1:00 PM EST.***
The Naval Air Warfare Center, Aircraft Division, Lakehurst, New Jersey, intends to issue a Firm Fixed Price (FFP) contract on a competitive basis for the procurement of the Drive Plate Bushing Gage, Part Number 18D13071-1. This item is in support of the United States Marine Corps (USMC) Domestic H-1 Helicopter Program.
This solicitation is being issued as a 100% Small Business Set-Aside in accordance with FAR Part 19.
In accordance with the attachments in this solicitation, the submitted proposal must be accompanied by all supporting data and facts used to develop the proposal that are accurate, current, and complete, to allow Government evaluators to make their independent assessments.
A proposal received without sufficient supporting data and rationale, such as inadequate cost/pricing data, will delay the procurement award and/or will result in the proposal being rejected by the Procuring Contracting Officer (PCO).
In the event that the Contractor or any of its subcontractors have non-complying existing deficiencies, the Government requests that these deficiencies be reported to the PCO as soon as they are known.
Technical Data Package and Export Control Requirements
***This effort requires access to the Technical Data Package (TDP). All requests for the TDP shall be requested from the Government via email at Christopher.d.brake5.civ@us.navy.mil no later than 1:00 PM EST on 18 August 2026, and shall be accompanied by a valid and current DD2345.
***This Solicitation includes DFARS 252.204-7025, Notice of Cybersecurity Maturity Model Certification (CMMC) Requirements. The Technical Data Package contains Controlled Unclassified Information (CUI). Offerors must obtain access to the CUI Drawing Package to prepare a proposal. Proof of CMMC Level 2 (Self-assessment) certification is required to request access to the Technical Data Package.
***Proposals submitted should be in accordance with the attached document titled, "CLIN STRUCTURE". Proposals submitted to the Government not in accordance with the attachment, "CLIN STRUCTURE" will not be subject for Government evaluation/consideration of this requirement.
***Proposals shall be submitted no later than 30 September 2026 at 11:00 AM EST to Christopher Brake.
Overview
Award Overview
Possible prior contracts
Sign in to see possible prior contracts for this requirement (matched by agency, NAICS and place of performance; not confirmed).
Contacts
Contracting Officer
Primary Contact
Documents
Showing 4 of 4 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Solicitation | DEPT OF THE NAVY | Sep 22, 2026 | 30.96 KB | |||
| Solicitation | DEPT OF THE NAVY | Sep 22, 2026 | 17.38 KB | |||
| Solicitation | DEPT OF THE NAVY | Sep 22, 2026 | 159.97 KB | |||
| Solicitation | DEPT OF THE NAVY | Sep 22, 2026 | 30.83 KB |
Lifecycle
N68335-26-Q-1139- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- Pre-SolicitationJun 10, 2026
The Drive Plate Bushing Gage - H-1 United States Marine Corps (USMC) Helicopter Program
- 4×SolicitationCurrentJul 31, 2026
The Drive Plate Bushing Gage - H-1 United States Marine Corps (USMC) Helicopter Program
Similar Opportunities
Title | Phase | Agency | NAICS | Set Aside | Posted | Deadline | Location |
|---|---|---|---|---|---|---|---|
***Amendment 0002 was posted 08 October 2026. Please see attached Amendment N68335-26-Q-1069-0002.*** The Naval Air Warfare Center Aircraft Division (NAWC-AD) is officially releasing a Request for Quote (RFQ) for a Firm Fixed Price (FFP) contract on a competitive basis for the procurement of one (1) Cart Adapter, P/N 70700-77200-041, in support of the Greece Hellenic Navy MH-60R Aircraft Program under Foreign Military Sales (FMS) Case GR-P-SCK. This solicitation is being issued as a 100% Small Business Set-Aside in accordance with FAR Part 19. Technical Data Package and Export Control Requirements This solicitation includes DFARS 252.204-7025, Notice of Cybersecurity Maturity Model Certification (CMMC) Requirements. The technical data package contains Controlled Unclassified Information (CUI). Offerors must obtain access to the CUI drawing package to prepare a proposal. Proof of CMMC Level 2 (Self) Assessment certification is required to request access to the technical data package. Refer to Section A of the solicitation document for full instructions regarding CMMC. The Government owns the Build-to-Print Technical Drawing Package, which is considered Export Controlled. All Offerors must possess a current and certified DD Form 2345 (Militarily Critical Technical Data Agreement) to request access to the drawings. Drawings will be provided to the designated data custodian listed on the certified DD Form 2345 via the DoD SAFE website. Refer to Section A of the solicitation document for full instructions regarding DD Form 2345. Requesting Access to Solicitation Documents To request access to the Government-provided documents associated with this solicitation, Offerors must submit the following via email: Proof of current and valid CMMC Level 2 (self-assessment) certification. A certified DD Form 2345. Requests should be sent to the Point of Contact (POC) listed below. Solicitation Number: N68335-26-Q-1069 Point of Contact and Questions The Point of Contact (POC) for this solicitation is: Kyle Welge, kyle.a.welge.civ@us.navy.mil. Questions must be received no later than 15:00 DST, 22 September 2026. All questions and inquiries regarding this solicitation must be submitted via email and reference Solicitation Number: N68335-26-Q-1069, Solicitation Title: Cart Adapter. Offerors are encouraged to review the solicitation and attachments thoroughly before submitting questions or requests for access. This RFQ shall not be construed as obligating the Government to award a contract or authorizing work to commence and shall not serve as a basis for any future claims against the Government. | Solicitation | 333514 | Total Small Business Set-Aside | 10/08/2026 | 10/28/2026 | - | |
***Amendment 0001 was posted 29 September 2026. Please see attached Amendment N68335-26-Q-1069-0001.*** The Naval Air Warfare Center Aircraft Division (NAWC-AD) is officially releasing a Request for Quote (RFQ) for a Firm Fixed Price (FFP) contract on a competitive basis for the procurement of one (1) Cart Adapter, P/N 70700-77200-041, in support of the Greece Hellenic Navy MH-60R Aircraft Program under Foreign Military Sales (FMS) Case GR-P-SCK. This solicitation is being issued as a 100% Small Business Set-Aside in accordance with FAR Part 19. Technical Data Package and Export Control Requirements This solicitation includes DFARS 252.204-7025, Notice of Cybersecurity Maturity Model Certification (CMMC) Requirements. The technical data package contains Controlled Unclassified Information (CUI). Offerors must obtain access to the CUI drawing package to prepare a proposal. Proof of CMMC Level 2 (Self) Assessment certification is required to request access to the technical data package. Refer to Section A of the solicitation document for full instructions regarding CMMC. The Government owns the Build-to-Print Technical Drawing Package, which is considered Export Controlled. All Offerors must possess a current and certified DD Form 2345 (Militarily Critical Technical Data Agreement) to request access to the drawings. Drawings will be provided to the designated data custodian listed on the certified DD Form 2345 via the DoD SAFE website. Refer to Section A of the solicitation document for full instructions regarding DD Form 2345. Requesting Access to Solicitation Documents To request access to the Government-provided documents associated with this solicitation, Offerors must submit the following via email: Proof of current and valid CMMC Level 2 (self-assessment) certification. A certified DD Form 2345. Requests should be sent to the Point of Contact (POC) listed below. Solicitation Number: N68335-26-Q-1069 Point of Contact and Questions The Point of Contact (POC) for this solicitation is: Kyle Welge, kyle.a.welge.civ@us.navy.mil. Questions must be received no later than 15:00 DST, 22 September 2026. All questions and inquiries regarding this solicitation must be submitted via email and reference Solicitation Number: N68335-26-Q-1069, Solicitation Title: Cart Adapter. Offerors are encouraged to review the solicitation and attachments thoroughly before submitting questions or requests for access. This RFQ shall not be construed as obligating the Government to award a contract or authorizing work to commence and shall not serve as a basis for any future claims against the Government. | Solicitation | 333514 | Total Small Business Set-Aside | 09/29/2026 | 10/08/2026 | - | |
***AMENDMENT 002 WAS ISSUED TO EXTEND THE PROPOSAL SUBMISSION DUE DATE TO 30 SEPTEMBER 2026 AT 11:00 AM EST.*** ***AMENDMENT 001 WAS ISSUED TO EXTEND THE PROPOSAL SUBMISSION DUE DATE TO 14 SEPTEMBER 2026 AT 1:00 PM EST.*** The Naval Air Warfare Center, Aircraft Division, Lakehurst, New Jersey, intends to issue a Firm Fixed Price (FFP) contract on a competitive basis for the procurement of the Drive Plate Bushing Gage, Part Number 18D13071-1. This item is in support of the United States Marine Corps (USMC) Domestic H-1 Helicopter Program. This solicitation is being issued as a 100% Small Business Set-Aside in accordance with FAR Part 19. In accordance with the attachments in this solicitation, the submitted proposal must be accompanied by all supporting data and facts used to develop the proposal that are accurate, current, and complete, to allow Government evaluators to make their independent assessments. A proposal received without sufficient supporting data and rationale, such as inadequate cost/pricing data, will delay the procurement award and/or will result in the proposal being rejected by the Procuring Contracting Officer (PCO). In the event that the Contractor or any of its subcontractors have non-complying existing deficiencies, the Government requests that these deficiencies be reported to the PCO as soon as they are known. Technical Data Package and Export Control Requirements ***This effort requires access to the Technical Data Package (TDP). All requests for the TDP shall be requested from the Government via email at Christopher.d.brake5.civ@us.navy.mil no later than 1:00 PM EST on 18 August 2026, and shall be accompanied by a valid and current DD2345. ***This Solicitation includes DFARS 252.204-7025, Notice of Cybersecurity Maturity Model Certification (CMMC) Requirements. The Technical Data Package contains Controlled Unclassified Information (CUI). Offerors must obtain access to the CUI Drawing Package to prepare a proposal. Proof of CMMC Level 2 (Self-assessment) certification is required to request access to the Technical Data Package. ***Proposals submitted should be in accordance with the attached document titled, "CLIN STRUCTURE". Proposals submitted to the Government not in accordance with the attachment, "CLIN STRUCTURE" will not be subject for Government evaluation/consideration of this requirement. ***Proposals shall be submitted no later than 31 August 2026 at 1:00 PM EST to Christopher Brake. | Solicitation | 333514 | Total Small Business Set-Aside | 09/14/2026 | 10/01/2026 | Lakehurst, NJ | |
The Naval Air Warfare Center Aircraft Division (NAWC-AD) is officially releasing a Request for Quote (RFQ) for a Firm Fixed Price (FFP) contract on a competitive basis for the procurement of one (1) Cart Adapter, P/N 70700-77200-041, in support of the Greece Hellenic Navy MH-60R Aircraft Program under Foreign Military Sales (FMS) Case GR-P-SCK. This solicitation is being issued as a 100% Small Business Set-Aside in accordance with FAR Part 19. Technical Data Package and Export Control Requirements This solicitation includes DFARS 252.204-7025, Notice of Cybersecurity Maturity Model Certification (CMMC) Requirements. The technical data package contains Controlled Unclassified Information (CUI). Offerors must obtain access to the CUI drawing package to prepare a proposal. Proof of CMMC Level 2 (Self) Assessment certification is required to request access to the technical data package. Refer to Section A of the solicitation document for full instructions regarding CMMC. The Government owns the Build-to-Print Technical Drawing Package, which is considered Export Controlled. All Offerors must possess a current and certified DD Form 2345 (Militarily Critical Technical Data Agreement) to request access to the drawings. Drawings will be provided to the designated data custodian listed on the certified DD Form 2345 via the DoD SAFE website. Refer to Section A of the solicitation document for full instructions regarding DD Form 2345. Requesting Access to Solicitation Documents To request access to the Government-provided documents associated with this solicitation, Offerors must submit the following via email: Proof of current and valid CMMC Level 2 (self-assessment) certification. A certified DD Form 2345. Requests should be sent to the Point of Contact (POC) listed below. Solicitation Number: N68335-26-Q-1069 Point of Contact and Questions The Point of Contact (POC) for this solicitation is: Kyle Welge, kyle.a.welge.civ@us.navy.mil. Questions must be received no later than 15:00 DST, 22 September 2026. All questions and inquiries regarding this solicitation must be submitted via email and reference Solicitation Number: N68335-26-Q-1069, Solicitation Title: Cart Adapter. Offerors are encouraged to review the solicitation and attachments thoroughly before submitting questions or requests for access. This RFQ shall not be construed as obligating the Government to award a contract or authorizing work to commence and shall not serve as a basis for any future claims against the Government. | Solicitation | 333514 | Total Small Business Set-Aside | 09/09/2026 | 10/01/2026 | - | |
Amendment 0002 hereby incorporates questions answered by Agency and extension to 2 November 2026, 4:00 PM EST. Please see attachment for details. When electronically submitting your proposal through the Solicitation Module of the Procurement Integrated Enterprise Environment (PIEE), recipients shall be Melanie Simon, melanie.k.simon.civ@us.navy.mil and Terrence Shearer, terrence.d.shearer.civ@us.navy.mil. | Solicitation | 333924 | Total Small Business Set-Aside | 10/08/2026 | 11/02/2026 | - |
Additional Details
Solicitation Number
N68335-26-Q-1139
Archive Date
Oct 15, 2026
Office Address
JOINT BASE MDL, NJ, 08733